What is the difference beween idoc package and idoc collection

Hi friends,
    i am unable to understand difference betwen Idoc package and Idoc cillection.
    Please give me clear clarification.
Thanks and regards
Bhanu

Hi Bhanu,
Apart from the replies above, in case you're looking for an answer from ECC perspective, here are some inputs: (ECC is considered as sender here)
1. IDoc Collection:
   This will collect the IDocs and will not immediately send it to the target system after they are created. Program RSEOUT00 can be later scheduled for these collected IDocs to deliver them to the target. You can treat this as a park and process approach which proves useful in several business scenarios.
This standard link gives more insight:
SAP Library - IDoc Interface/ALE
2. IDoc Packaging:
    This defines the number of IDocs to be packed and sent in 1 RFC call (tRFC). If you set is as 20, then 20 IDocs will be sent in 1 tRFC request. This doesn't connote whether the IDocs will be triggered immediately or later, this just talks about the bundling of IDocs per RFC call.
Hope this helps.
Regards,
Abhishek

Similar Messages

  • What is the difference between handling unit and packaging material

    hi
    what is the difference between handling unit and packaging material

    Hi,
    A handling unit is a physical unit that consists of the packaging materials (load carrier / packaging material) and the goods contained therein. A handling unit is always a combination of materials and packaging materials. All the information contained in the material items, such as batches and serial numbers, is always available by way of the handling units.
    Packaging materials are intended to enclose or hold together the materials that are to be packed. In other words, the material that is to be packed can be packed into or onto the packaging material. The packaging material can be a load carrier. The most important packaging materials include crates, boxes, containers, wire baskets, and pallets.
    Regards,
    Naveen

  • What is the difference between Video-out and mirroring?

    What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
    I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
    I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
    Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
    There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
    I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
    So far not doing very well.

    Now found these but have had to give up on this adapter!
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    http://support.apple.com/kb/HT4108

  • What's the difference between segment filtering and reduced message type

    Hi gurus,
    What's the difference between segment filtering and reduced message type? It seems they have the same functionality: Reduce the segment while idoc is generated.
    Thanks in advance.

    Hi,
    BD53 is for IDoc Reduction.
    this allows you to create a reduced message based upon a standard message type.If you want see mandatory fields. go to T-coe BD53 and give one standard messege type name and eg: matmas
    there mandatory fields will be in Green color..
    And BD56- This transaction is used to filter out segments of IDocs for combination of sender and receiver. This is usefull in scenarios where a standard IDoc with many segments is used but the receiving partner is only interested in some of the segments
    the table related to this transation is TBD20
      please go through below blog you have an idea abt that,
    http://wiki.sdn.sap.com/wiki/display/ABAP/ReducedMessageTypes
    http://saptotal.com/IDoc%20Segment%20Filtering.html
    regards,
    ganesh.

  • What's the difference between gnome, kde and xfce?

    What's the difference between gnome, kde and xfce? Today I heard someone said gnome and kde have more software than xfce. Is that real?
    Thank you.
    Last edited by thesimpsons (2009-04-02 01:50:28)

    Its really a matter of taste, really. KDE is know to be configurable like hell, GNOME very easy to use, and XFCE lightweitgh.
    Keep in mind that whatever desktop environment (DE) you choose, you can use any application in any DE. For example, firefox, a "GTK" application, works without problem under KDE. Or Kile, a latex front-end for KDE, works perfect under Gnome.
    Personnally I prefer KDE. But I mostly prefer KDE applications like the editors (Kate/Kwrite) and file manager (dolphin).
    KDE is slower to start on my EeePC (really small machine) but because it is full featured, I can cut on number of packages installed, so in the end, with the same functionality, I have more room on my disk then using XFCE!
    Just try them, and choose the one you like

  • What's the difference between transport route and transport layer

    what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

    Hi,
    Transport Layer in ABAP Workbench
        The Change and Transport System supports the distribution of development
        work on large projects across multiple SAP Systems.
        The packages in each development system are grouped into one transport
        layer.
        The transport layer determines whether objects are assigned to a local
        or transportable change request.
    Use
        Each of your SAP development systems is assigned a transport layer as
        its standard transport layer. If you use Extended Transport Control, you
        can assign different standard transport layers to certain clients.
        You can define at the most one consolidation target for each SAP System
    and transport layer.
    When you create a package, it is assigned the standard transport layer
    of the SAP System.
    If you want to assign a different transport layer to a package, you
    require the administration authorization for the Change and Transport
    System.
    The objects in a package automatically have the transport attributes
    defined for the corresponding transport layer.
    o   If a consolidation route originating in their SAP System is defined,
         then the objects are assigned to a transportable request, and
         transported into the consolidation target when it is released.
    o   If a consolidation route is not defined, the objects are assigned to
         a local request, and are not transported.
    Customizing settings are not assigned to a package. They have the
    transport attributes of the standard transport layer of the system or
    client.
    It is best to assign a package a standard transport layer for which a
    consolidation route originating in the development system is defined.
    To display and maintain the transport layers and routes, use the
    Transport Management System (transaction STMS).
    Only the system adminstrator can make changes.
    Caution:
         The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
         Release 4.0A and cannot be maintained.
    Regards
    Ben

  • What's the difference between reguler KDE and KDEmod?

    Hello all,
    In two weeks I get my new laptop, which will be capable of running Arch and KDE ( as my current computer isn't, somehow it only runs Fedora w/ Gnome)
    Since I really like Arch and already got it working on Virtualbox, I want to install it on my new laptop. I'd like to get it working with KDE, but I noticed Arch also has KDEmod. I already searched the forums but couldn't really find an answer to my question: What is the difference between regular KDE and KDEmod and which one is better for me to use?
    Thanks in advance!

    Allan, i forgive you for your poor paragraph construction and sorry for me being a bit peeved
    However, i know you have read more from the IRC log than just that one sentence by me...
    Allan wrote:
    From the IRC log, I do not think that conclusion is too far off, especially if you are considering Arch-Stable as your base...  So saying "plain wrong" seems... well...  plain wrong. Especially given the irc log:
    <funkyou> in one sentence: to do what we really want to do, we need a stable platform.
    So why not showing the whole picture and clear this up:
    <funkyou> ok, to start: i think at least some of you have noticed that arch linux is a fine platform for what we want to deliver, but there are some little "annoyances"
    <funkyou> mainly:
    <funkyou> -.so bumps every few weeks
    <funkyou> -the general "freshness"
    <funkyou> -a lot of manual interaction needed (sometimes)
    <funkyou> everyone can see these problems when looking at the forums, _most_ of them are related to updates
    <funkyou> in one sentence: to do what we really want to do, we need a stable platform.
    Makes more sense now? Its not that Arch is too unstable, its just that we cant keep up will all the changes... And this is not Archs "fault" nor anyone elses fault, its just going too fast for us. Most annoying or severe bugs in our tools are there due to upstream updates. And the reasons are not really the .so bumps (which are mostly solved by a simple rebuild) but also constantly changing apis and stuff. This is not a big problem in KDE (they keep their apis clean), but a big one when it comes to other stuff like parted, to give an example. And this is our main problem, we need to constantly adapt our code to upstream changes.
    This even resulted in a repo with modified or "frozen" Arch packages just to keep our liveCD going, and now we are looking for solutions for this problem, and "stable" snapshots seem to be one way... Oh, and if we would do this (there is nothing announced yet), we would do our own snapshot every X months because ArchStable seems to be a dead project. We also considered cooperating with the ArchServer guys, but their stuff is really made for servers, so even while their project is really nice its not really an option for us.
    Well, we'll see what we will do during the next months, now we are still testing and evaluating some solutions... Oh, and people, please stop any "we dont need another ubuntu" complaints...

  • What is the difference between workbench request and customizing request

    hi gurus
    can anyone suggest me
    what is the difference between
    workbench request and
    customizing request
    abaper ll work on which request
    thank you
    regards
    kals.

    A quick  search in the forum would have taken you to this answer
    Workbench Requests
    When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
    Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
    Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
    Customizing requests
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.

  • What is the difference between EA6500-NP and EA6500 (no -NP suffix)?

    Hello there. What is the difference between EA6500-NP and EA6500 (no -NP suffix)? I see some stores (like Staples) advertising a clearance price on the EA6500 (without the -NP suffix). Just curious. Thank you very much.

    Panziesforpanties is correct. Cisco/Linksys changed their marketing strategy from "connect cloud" to "smart wifi". Same product....different marketing packaging.

  • What is the difference between sy-uline and uline in sapscripts ?

    hi guys,
    what is the difference bt sy-uline and uline in sap scripts ?
    this is an interview question ?
    also how can we draw a line without using above ?

    Hi ,
    sy-uline is a system field.
    No-difference.  Except that uline is used outside
    the Write Statement
    TO draw a line.
    /: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
    OR
    Draw a horizontal line by setting the HEIGHT in a BOX command to 0. Draw a vertical line by setting WIDTH to 0.
    /: BOX FRAME 10 TW WIDTH 0 TW HEIGHT '10' CM
    Vertical line 10 CM long
    /: BOX FRAME 10 TW WIDTH '10' CM HEIGHT 0 TW
    Horizontal line 10 CM long
    ALSO
    You can draw a line by setting the Height or Weidth to 0
    and add a frame. E.g. a horizontal line:
    /: SIZE HEIGHT '0' MM WIDTH '200' MM
    /: BOX FRAME 10 TW XPOS '11.21' MM YPOS '14.81' MM INTENSITY 100
    <i><b>Reward if helpful.</b></i>
    Regards,
    Pritha.
    Message was edited by:
            Pritha Agrawal

  • What is the difference between Topic Keywords and Index File Keywords?

    What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
    RH9.0.2.271
    I'm using Webhelp

    Hi there
    When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
    Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
    As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
    <meta name="MS-HKWD" content="BOFFO" />
    When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
    Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
    Hopefully this helps... Rick

  • What is the difference between jsp :include and server side include

    what is the difference between jsp :include and server side include(request dispatcher include method)????
    i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
    Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
    do suggest if u hav ny other diff in this context...

    The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
    If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
    Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
    - Saish

  • What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

    Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

    Any call made from the API will automatically be set to the “Session Timeout” period, no matter
    what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
    Short Session Timeout and Session Timeout in Excel Services
    Short Session Timeout and Session Timeout in Excel Services - Part 2
    Sessions and session time-outs in Excel Services
    above links are from old version but still applies to all.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • What are the differences between ECC5.0 and 6.0 new GL functionality

    Hi Experts,
    What are the differences between ECC5.0 and 6.0 new GL functionality.
    If we want to implement IFRS, I think New GL functionality is very helpful, but why sap is recommending only for ECC6.0 new GL functionality, Eventhough this functionality is available in ECC5.0.
    Best Regards,
    Dharani

    Dear,
    ECC 5.0 vs. ECC 6.0/SAP ERP 6.0
    Functionality not available in the new G/L with mySAP ERP 2004 and ERP Central Component (ECC) 5.0:
    Transfer prices
    Statistical key figures
    Euro translation
    Audit Information System (AIS)
    Archiving
    Data retention tool
    Regards,
    Chintan Joshi.

  • What is the difference between document class and normal class

    Hi,
    Please let me know what is the difference between document class and normal class.
    And I have no idea which class should call as document class or call as an object.
    Thanks
    -Actionscript Developer

    the document class is invoked immediately when your swf opens.  the document class must subclass the sprite or movieclip class.
    all other classes are invoked explicitly with code and need not subclass any other class.

Maybe you are looking for

  • Small Business Server 2011 Essentials failed lock bios on LSI MegaRaid 9260 8i on Gateway GT350 F1

    I had SBS 2011 Essentials on my Gateway GT350 F1 server setup in LSI MegaRaid 9260 8i Raid 1. I bought 2 x 900gb sas drives to replace the 2 x 300gb i have. When i try to install SBS 2011 Essentials i get a error message saying failed bios lock this

  • Photo app is showing right order while iPhoto app isn't

    Hi, Today I bought iPhoto for my iPad. I really like the app and the features it has! I imported a bunch of photo's from itunes (aperture) to my iPad. The normal Photo app is showing the events and the photo's in it in the right order. The date the p

  • Can't stop synchronization, and other issues...

    I can't get my mobile accounts to NOT attempt home directory synchronization. It's a feature I've never used, will investigate at a point later in the future, and cannot figure out how to turn it off. It seems like some 10.4. server update started ho

  • How to delete header

    How to delete the header? I want  to delete the header because it consumes space on my doc.

  • FM or a method to abort a batch job

    Hi All, I am looking for a way in which I can abort a background job which is either scheduled or currently running programmatically. Is there a way to do this even if the job currently running is waiting due to either a wait statement or for a respo