What is the differences between Clone & Healing Brushes?

Dear Forum,
I am using PSE 5.0. Could someone explain the difference between the Clone tool and the Healing Brush tool? They both seem to require a source pixel area and a destination pixel area. I understand why the Spot Healing Brush is different, but I am at a loss to see why what the difference is with the Clone tool. Thanks in advance.
Bob
Robert Schuldenfrei
[email protected]

The clone stamp puts down an exact copy of the sampled material. The healing brush blends it in with the underlying area.

Similar Messages

  • What is the difference between closing your macbook & pressing apple-sleep?

    What is the difference between closing your macbook & pressing apple-sleep? My friend aid that it is better to put your computer to sleep by pressing the apple then hitting sleep. I have been just closing it. Is there a difference? Also, is it better to shut your computer down every once and a while. It seems like it gets slow if I just have it sleep after a couple weeks. ALSO, after it has been on sleep every night for a while, my computer has trrouble turning off. I get the problem that says, the application finder has failed to quit try force quitting and try again

    None.
    There's no particular need to shut down the computer except when traveling or moving the computer.
    Whatever other problems you've described have nothing to do with sleeping or shutdown. More likely you need to do some maintenance and/or check that you haven't installed incompatible third-party software.
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard.
    OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that presently AppleJack is not compatible with Leopard.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. Carbon Copy Cloner (Donationware)
    6. SuperDuper! (Commercial)
    7. Intego Personal Backup (Commercial)
    8. Data Backup (Commercial)
    The following utilities can also be used for backup, but cannot create bootable clones:
    1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
    2. Toast
    3. Impression
    4. arRSync
    Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
    Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at www.versiontracker.com and www.macupdate.com.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • What is the difference between FND_CONC_CLONE.setup_clean and target_clean

    What is the difference between fnd_conc_clone.setup_clean and fnd_conc_clone.target_clean?
    I always run setup_clean to wipe out all the information carried from source, and then run adautocfg.sh on dbTier followed by appsTeir. This will give me the clean newly cloned ebs system. But what is target_clean for? What is the difference between setup_clean and target_clean;
    James

    I finally go through the code and actually run the target_clean in our test system. Here is general rule, if you clone the ebs system, you only need to run setup_clean, it will clean out topology information or ebs connection information from the system. Then you run adautocfg.sh on db tier first following by adautocfg.sh on apps tier. All the topology or connection information will be populated again inside the database.
    Once you have cloned the system, you do not want any printer setup info, log/out info or profile info carried from source, then you can run target_clean. For me, I do need preserve printer and profile info, so I need to export following 4 tables before running target_clean.
    FND_PROFILE_OPTION_VALUES,
    FND_PRINTER,
    FND_PRINTER_TL,
    FND_CONCURRENT_PROGRAMS
    Hope this will help.
    James

  • What's the difference between these two modes?

    Hello there!!!
    As you all know, in the deco tool there are three differences modes:
    1. The Symmetry Brush effect mode.
    2. The Grid Fill effect mode.
    3. And the Vine Fill effect mode.
    Inside the Symmetry Brush effect mode, in its advanced options, there is one option named 'Grid Translation', which allow you to create a grid effect from a selected symbol, so I simply wonder what's the difference between this advanced option of the Symmetry Brush effect to the 'Grid Fill effect mode' that also enable you to do just the same thing!!!!
    Everybody who think that he found one or more differences between the mentioned above modes, is invited to post his opinions here.

    In analog terms, to explain YCbCr use the example of the COMPONENT output from your DVD player. It use 3 separate cables (Y = Luminance = Green Cable), (Y-B = Blue Color Diff = BLUE Cable) and (Y-R = Red Color Diff = RED Cable). In the analog world, RGB is actually RGBHV (5-wire) and is adaptable to 15-pin VGA with a simple passive adapter. Many people will mistakenly refer to Analog Component video as RGB, since the cables are Red, Green and Blue.
    So, since all that mumbo jumbo means essentially the same, this appears to be the digital "equivalent" of what is known as Component Video in the Analog world... What I said about RGBHV does not apply to the 10-bit color, but thought I'd mention it anyway.
    -BChil

  • What is the difference between express and extreme?

    I am wondering what is the difference between express and extreme and will there be any effect in performance if I am just using it at home?

    I am just looking for router that gives me reliable highspeed wi-fi for personal use within my home.
    Wireless performance is roughly equal between the two devices, with a slight edge to the Extreme since it uses a bit better antenna package.
    If I connect the the hard drive to the extreme, does that mean I can back up all my data wirelessly through the port into my external hard drive?
    Yes, if you backup manually, or use an application like Carbon Copy Cloner or SuperDuper. 
    No, if you were planning to use Apple's Time Machine application since Time Machine backups to a hard drive at the USB port of the AirPort Extreme are not officially supported by Apple.

  • Could anybody explain what  is the difference between cloning and refresh

    Hi,
    Could anybody explain what is the difference between cloning and refresh
    What exactly we do in only E-business suite clone(Database and applications) and only database clone and refresh
    Regards,
    ravi

    Welcome to the forum,
    Database Cloning includes cloning the ORACLE_HOME of the database and the copying of data from source to target instance.
    Database Refresh includes copying of data from source to target instance. ORACLE_HOME is not copied during a Database refresh.
    Similarly Apps cloning includes cloning the techstack, i.e the 806, iAS homes along with APPL_TOP, COMMON_TOP and the Database
    Apps refersh is again copying the database from source to target. The techstack or the APPL_TOP or COMMON_TOP are not copied during an Apps refresh
    see this post
    http://sabdarsyed.blogspot.com/2008/08/cloning-and-refreshing-oracle-database.html

  • What is the difference between Topic Keywords and Index File Keywords?

    What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
    RH9.0.2.271
    I'm using Webhelp

    Hi there
    When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
    Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
    As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
    <meta name="MS-HKWD" content="BOFFO" />
    When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
    Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
    Hopefully this helps... Rick

  • What is the difference between "Invisible" (11g) and "virtual" index?

    Hi
    What is the difference between the "Invisible" index and "virtual" index?
    Thanks
    Balaji

    Indexes can be visible or invisible. An invisible index is maintained by DML operations and cannot be used by the optimizer. Actually takes space, but is not to be used as part of a potential access path.
    AFAIK, a virtual index is created by the tools used in SQL statement access path tuning to provide an alternative for the optimizer to test. It does not take any real space as it is a pure in memory definition.

  • What is the difference between the drop and create the index and rebuild index ?

    Hi All,
    what is the difference between drop and create index & rebuild index ? i think both are same...Please clarify if both are same or any difference...
    Thanks in Advance,
    rup

    Both are same. Rebuilding an index drops and re-creates the index. 
    Ref:
    SSMS - https://technet.microsoft.com/en-us/library/ms187874(v=sql.105).aspx
    TSQL - https://msdn.microsoft.com/en-us/library/ms188388.aspx
    I would suggest you to also refer one of the best index maintenance script as below:
    https://ola.hallengren.com/sql-server-index-and-statistics-maintenance.html

  • What is the difference between 'command delete' and using 'delete original and all versions'?

    My masters are not referenced and I usually have only one version.  What is the difference between using 'command delete' versus going to the top menu bar and using 'dele

    Good question  .
    When the Version is the only Version based on the Original of that Version, the two commands have the same effect.
    See this User Tip by master Aperturist Frank Caggiano.

  • What is the difference between the following 2 hints?

    What is the difference between the following 2 hints?
    USE_NL
    USE_NL_WITH_INDEX

    http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/sql_elements006.htm#SQLRF50701
    Oracle Documentation starts @ http://tahiti.oracle.com

  • What is the difference between #variable_name and :variable_name?

    Hi!
    What is the difference between #variable_name and :variable_name?
    I have found that if we use alphanumeric variable then :variable_name return value in quotes but #variable_name without quotes.
    Why it does not work in the same way for variable default values when variable is used in filter? (It works in mapping)
    I use variable in filter like T.OUT_DATE>convert(datetime,:LAST_UPDATE_DATE,121)
    When I use my variable in package and do refresh it works fine. But when I try to execute the same interface with variable default value I get error. Seems that variable name has been not changed to the value. It does not work with default value in quotes neither without quotes.
    Any ideas how to solve that?
    Thank you in advance!
    Edited by: user13278245 on Sep 15, 2010 4:34 AM

    Question is how to make it work with default value, when I execute interface standalone, not in package? And why it works in mapping but not in filter?
    + I have found that it works if source is Oracle. It doesn't work only for MS SQL source.
    Edited by: user13278245 on Sep 15, 2010 6:43 AM

  • What is the difference between Video-out and mirroring?

    What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
    I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
    I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
    Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
    There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
    I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
    So far not doing very well.

    Now found these but have had to give up on this adapter!
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    http://support.apple.com/kb/HT4108

  • What is the difference between jsp :include and server side include

    what is the difference between jsp :include and server side include(request dispatcher include method)????
    i understand that both request dispatcher include method and jsp:include take dynamic data,so when would one use request dispatcher include and when jsp:include.
    Is the usage interchangeable?i believe jsp include is used only for jsp/html but include directive can be used to include servlets ,jsp and html....correct me if i m wrong and
    do suggest if u hav ny other diff in this context...

    The difference really is: in what format do you want your inclusions? If your environment has many Java developers and only a few designers that focus mainly on, say, Flash, that might push you more towards the server-side include() directive. Or, if you have a large set of pages that receive dynamic content that is displayed in a consistent fashion (such as a workflow header area on a page).
    If, on the other hand, you have more web designers, there may be a greater desire to deal in markup rather than Java code. Java developers themselves might prefer to view markup (JSP) that more resembles the eventual output than something occuring in Java code.
    Finally, there are considerations of tiering. While it is totally possible to (and I have previously) implement 'view classes' that render markup or generate layout templates, JSP's offer, IMO, a subtle, psychological advantage. By forcing a developer to work in a different format, markup versus Java source, the separation on view from controller and model becomes a bit easier. It is still possible to make mistakes, but if a developer at some point notices, "Wait, I'm in a JSP, should I be importing a java.sql class?", then the choice to use JSP includes has paid off in spades.
    - Saish

  • What is the difference between"export audio and "bounce"?

    What is the difference between the "export audio" and "bounce" functions?
    Do plug ins get saved with the created BWF(broadcast wave files)in the "export" function?
    Or is the "bounce" method the required function to enable plugins embedded in BWF files?
    Also I noticed that the "convert to SDII file" produces files not readable by ProTools.
    It was my understanding that using the convert to SD II files via the audio bin is used, it would produce BWF files for use in Protools.And if you use symbols like / in your track names the files won't get converted or bounced!
    Also would it not be cool if LE8 had a feature that could render BWF files small enough to send via internet file sharing and transfer apps, in other words a built in file transfer feature. Am I asking for too much.

    Export audio is good to move the tracks to another application or computer for further editing.
    Bounce renders the mix into a stereo track in 2 basic ways: PCM, i.e. uncompressed, or compressed (like AAC, mp3 etc.).
    PCM can be AIFF, Broadcast WAV (even if it's written only WAV those are BWF), and SDII that's the standard file type of ProTools.
    Note that PT doesn't use interleaved stereo files but two separate files for left and right channels, i.e. filename.l and filename.r and if you save in this way PT will accept those files for sure.
    Uncompressed audio files cannot be compacted (in fact, that's why they're called uncompressed).
    These days there are a lot of Internet services that permit to transfer several Gb (up to 5) for free.
    If you are thinking of something like Digidelivery then you should put your attention towards Digi's products, not Apple's ones.
    cheers
    rob

Maybe you are looking for