What is the differnce between Blue,Purple and Orange Audio Tracks. Can you convert either to Green Midi Track?

Are you asking about Garageband? Your signature also mentions Logic, but I have never worked with that.
Concerning Garageband:
Real Instrument regions from your recordings are purple.
Real Instrument regions from Apple Loops are blue.
Regions from imported audio files are orange.
Software Instrument regions from recordings, loops, and imported MIDI files are green.
So far as I know you can convert software instrument loops to real instrument loops, but not real instrument loops to software instrument loops.

Similar Messages

What's the difference between PSE 9 and PSE 8? If you have PSE 8, is there an upgrade fee?

see above

Hi Hussein,
Thanks for your reply.
I have fixed below two issues by putting generalPortQueries.jar and LangQueries1_3_4.jar under $ADE_VIEW_ROOT/oui/jlib/Libraries.
SEVERE:LangQueries: OSP-10001:"Alias: LangQueries" not found in "Catalog"
SEVERE:generalPortQueries: OSP-10001:"Alias: generalPortQueries" not found in "Catalog"
I have also looked into the links you posted, and tried to filter out specific answer to my third question of :
SEVERE:OSP-10072:Line 4: Explicit copyGroup/CopyDll actions not allowed in flow.
But however, since the task is urgent and due to the big amount of information, I couldn't search out exact answer/solution to my question above in short time.
It would be highly appreciated if you could take time to point me to a quick and direct way to solve this specific problem? Thanks for your time in advance.
To clarify, what I mentioned as 'our product' was not Oracle Database, but Oracle Database Lite.
Regards,
Winnie
Edited by: winnie.hu on Nov 22, 2010 6:00 PM
Edited by: winnie.hu on Nov 22, 2010 6:26 PM

What is the difference between Video-out and mirroring?

What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
So far not doing very well.

Now found these but have had to give up on this adapter!
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
http://support.apple.com/kb/HT4108

What is the difference between sms, mms and i message

Hello: what is the difference between sms, mms and imessages? How can I set my IPHONE 4 to just send SMS, if those are simple text messages? Thanks you. Annie

SMS - text message
MMS - picture message
Imessage - iphone to iphone/ipod/ipad text - not a carrier feature, so it is not part of any text plan). Uses wi-fi or 3g.
Turn off MMS and imessage:
iPhone User Guide (For iOS 5.1 Software)

What is the difference between unstack, extract, and split

I want to make a copy of a picture. I used the duplicate option, which does whatever it does and causes them to be linked somehow. I'm trying unstack, extract, and split to try to make the duplicate act as an independent picture.
I'm wanting a second copy to put in another project. Yet when I move any of these duplicates, they all move.
What is the difference between unstack, extract, and split?
How can I move a copy of a pic from one project to another without the original moving?
Thanks

Yes - you are correct and yes extracting one will make it behave independently but you almost never actually want to do that. What you really want are album picks.
Stacks are extremely useful - here is a little info
[Aperture stacks|http://photo.rwboyer.com/2008/09/16/aperture-2-organization-tip-more-on- stacks-and-albums>
You may also want to check out the Organization eBook.
RB

What is the difference between 'Shopping cart' and 'Team cart'

Hi,
   There a knowledge about 'Team Cart' in SRM 7.0 .I want to know what is the difference between 'Shopping cart' and 'Team cart'?
   Thank you !
   best Regards

Hi,
SRM self-service procurement and requisitioning process was generally focused on the requestor and goods recipient. SAP SRM 7.0 introduces the new 'team' approach.
Team purchasing enables users to:
Define their own procurement substitutes
Make shopping carts accessible to substitutes
Substitutes (team members) are able to:
Search for and take over team shopping carts
Create follow-on documents (such as confirmations) for team carts they have taken over
Regards,
Jason

What is the difference between Grid computing and Cluster ?

Heh Friends
What is the difference between Grid computing and Cluster ?
/sumit

You
can't easily switch a server from being a database
server into an application server when the load on
your system changes.
That's only because you didn't architect your grid that way. :P
(Mine doesn't do that either)
>
I guess people use the bits of the definitions that
support their marketing claims :)
Isn't that the truth!
Oracle marketing speaks of grid as a concept with their technologies enabling the grid. Other companys offer products that turn computers into (their defintion of) a grid - Sun's Grid Engine, Avaki's Grid, and Platform's LSF come to mind.
Gotta love the marketing folks; especially at Oracle. It seems to me that when a product doesn't succeed, they tend to rebrand and reintroduce.
Chris

What is the difference between XI architect and Xi developer

Dear Friends
Would you like to answer me on What is the difference between XI architect and Xi developer?
thanking you
regards
Naim

Hi,
>>>>XI architect
he/she knows/understands how XI works
in all aspects so can model efficient flows
via XI
he doesn't even have to do anything in XI
(except the specification for developer)
as he already did it in many projects
and he knows that it's working like he says...
>>>Xi developer?
it can be any person how knows a little
bit of XI (just to create XI's objects)
and nothing more
Regards,
micha

Whats the differnce between a7 chip and m7 chip

iPhone 5s, whats the differnce between a7 chip and m7 chip?

For more details on M7 you can read http://en.wikipedia.org/wiki/Apple_M7
Allan

What is the differnce between t-mobile network and EE network?

what is the differnce between t-mobile network and EE network?

Difference as far as speeds?
Difference in Prices?
What do you want to do in the UK with your iPhone?
Personally, I have enjoyed using 3 UK and Vodafone while I was in Heathrow.

HT1600 what's the difference between apple tv and apple tv2?

What is the difference between apple tv and apple tv 2?
How do I get videos on my Ipad to play on my Apple TV? I tried Airplay and only vocal comes over.

Thanks! Yea, I'm leaning that way and from everything I've read the 'biggest' benefit would be Airplay - and the 5:1 surround in my gameroom (or the 7:1 surround in my screening room). I don't stream movies - I'm more of a blu ray collector and watch movies that way - so in all probability I wouldn't use Apple TV in the screening room - but there are several other locations where it could be a nice addition.
I do watch some TV shows on my iPAD, and lots of music videos - so perhaps, with Airplay they'll look/sound even better if I push that content to one of the other big screens.
For the most part - whenever I wanted to watch something from my iPad on the big screen, I just connected it to my A/V receiver - pressed play, and enjoyed. Apple TV would now become that device that's connected to my A/V receiver, and the iPad more of a remote - uncabled.
Again - thanks for the reply; it's proven very helpful.
Cheers.

What is the associatione between Star Wars and the WCUI Skin "New Hope

Hi Guys,
I am doing SAP CRM 7.0 through University SAP Alliance programme. Could you please anyone tell what is the answer for the following question
What is the associatione between Star Wars and the WCUI Skin u201CNew Hopeu201D
Thanks in advance
Regards
Saravanan.R

Ok, I'll take a stab at it. Since you normally work with a single layer it probably is not as important. But it still can be important inder the right circumstances.
Lets say you have a photo of a blue background with a green square and a blue circle. You want to move the two objects.
Use the selection tools to select one of the objects, hit ctrl-j to make a copy of that section onto a new layer, then repeat for the second object.
Now that each object is on it own layer, you are free to fill that original image with the background color
Because the two objects are on their own layer and everything around that object is transparent, you can freely move the object around until it suites you.
When you are done, if you wish you can flatten the layers again.
Now this could have been done using the new layers button, but it creates an emty layer, so you have the extra step of copy and pasting the section to that new layer.
Now image you work for a large company and you are doing a composite for a huge magizine that has over a hundred objects that your boss "says" are in the wrong location, and wants them moved asap as the magazine is printing by nightfall.
By eliminating the extra copy/paste step with multiple layers the time saved can be huge.
If you are creating new objects then duplication doesn't really make sense then so, each does have its place.
Hopefully that sheds a bit of light and doesn't confuse things more. LOL.

What is the difference between admin.jar and admin_client.jar

Oc4j provide two jar for admin purpose: admin.jar and admin_client.jar. what are the differnce between them?

I'm sure I've provided an answer for this before -- try searching this forum and see if its there.
In short: admin.jar is old and uses a bunch of internal APIs.
admin_client.jar is a new implementation in 10.1.3.x and it uses JMX/JSR77/JSR88 APIs as its basis. It supports config/deployment operations against ALL the OC4J variants -- standalone, OracleAS single instance or OracleAS groups. We've tried to ensure that admin_client.jar has all the necessary coverage from admin.jar -- the syntax is very similar and all the relevant commands are carried forward.
If you are making a choice, choose admin_client.jar.
-steve-

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

What is the diffrence between sap events and application events

Hi all,
what is the diffrence between sap events and application events.Can any one tell me with examples.
regards,

Hi,
Look at this,
<b>System Events (Default)</b>
The event is passed to the application server, but does not trigger the PAI. If you have registered an event handler method in your ABAP program for the event (using the SET HANDLER statement), this method is executed on the application server.
Within the event handler method, you can use the static method SET_NEW_OK_CODE of the global class CL_GUI_CFW to set a function code and trigger the PAI event yourself. After the PAI has been processed, the PBO event of the next screen is triggered.
The advantage of using this technique is that the event handler method is executed automatically and there are no conflicts with the automatic input checks associated with the screen. The disadvantage is that the contents of the screen fields are not transported to the program, which means that obsolete values could appear on the next screen. You can work around this by using the SET_NEW_OK_CODE method to trigger field transport and the PAI event after the event handler has finished.
<b>Application Events</b>
The event is passed to the application server, and triggers the PAI. The function code that you pass contains an internal identifier. You do not have to evaluate this in your ABAP program. Instead, if you want to handle the event, you must include a method call in a PAI dialog module for the static method DISPATCH of the global class CL_GUI_CFW. If you have defined an event handler method in your ABAP program for the event (using the SET HANDLER statement), the DISPATCH method calls it. After the event handler has been processed, control returns to the PAI event after the DISPATCH statement and PAI processing continues.
The advantage of this is that you can specify yourself the point at which the event is handled, and the contents of the screen fields are transported to the application server beforehand. The disadvantage is that this kind of event handling can lead to conflicts with the automatic input checks on the screen, causing events to be lost.
Hope u understood.
Thanks&Regards,
Ruthra.R

What is the differnce between Blue,Purple and Orange Audio Tracks. Can you convert either to Green Midi Track?

Similar Messages

Maybe you are looking for