What is the diffrence between the 2 tb and 3tb version, only harddisk?

i like to buy a timecapsule. The differnce in price makes me wonder if the only differendce is the harddisk capacity?

The only difference is the capacity of the hard drive on the new 2TB and 3 TB models.

Similar Messages

  • What is the diffrence between package javax.sql and java.sql

    Is javax designed for J2EE?
    And when to use package javax?

    Hi,
    What is the diffrence between package javax.sql and java.sql?The JDBC 2.0 & above API is comprised of two packages:
    1.The java.sql package and
    2.The javax.sql package.
    java.sql provides features mostly related to client
    side database functionalities where as the javax.sql
    package, which adds server-side capabilities.
    You automatically get both packages when you download the JavaTM 2 Platform, Standard Edition, Version 1.4 (J2SETM) or the JavaTM 2, Platform Enterprise Edition, Version 1.3 (J2EETM).
    For further information on this please visit our website at http://java.sun.com/j2se/1.3/docs/guide/jdbc/index.html
    Hope this helps.
    Good Luck.
    Gayam.Srinivasa Reddy
    Developer Technical Support
    Sun Micro Systems
    http://www.sun.com/developers/support/

  • What is the diffrence between My Runnable Interface and Java Runnable

    Hi folks
    all we know that interfaces in java just a decleration for methods and variables.
    so my Question is why when i create an interface its name is "Runnable" and i declared a method called "run" inside it.then when i implements this interface with any class don't do the thread operation but when i implement the java.lang.Runnable the thread is going fine.
    so what is the diffrence between My Runnable Interface and Java Runnable?
    thnx

    Hi folks
    all we know that interfaces in java just a decleration
    for methods and variables.
    so my Question is why when i create an interface its
    name is "Runnable" and i declared a method called
    "run" inside it.then when i implements this interface
    with any class don't do the thread operation but when
    i implement the java.lang.Runnable the thread is going
    fine.
    so what is the diffrence between My Runnable Interface
    and Java Runnable?
    thnxClasses and interfaces are not identified by just their "name", like Runnable. The actual "name" the compiler uses is java.lang.Runnable. So even if you duplicate the Runnable interface in your own package, it's not the same as far as the compiler is concerned, because it's in a different package.
    Try importing both java.util.* and java.awt.* (which both have a class or interface named List), and then try to compile List myList = new ArrayList();

  • What is the diffrence between a blanket PO and a Framework order?

    What is the diffrence between a blanket PO and a Framework order?

    Hi
    You have to use document type Frame work order for Blanket PO.
    You can use blanket purchase orders to procure consumable materials or services for which it is not worth creating a separate purchase order for each procurement transaction. 
    Blanket purchase orders are usually valid for a longer period of time. You can directly post the invoices for the materials and services procured for this blanket purchase order.
    Raju

  • What is the diffrence between OMB plus command and OMB command

    what is the diffrence between OMB plus command and OMB command?
    are they both TCL command?

    Hi Alena,
    Welcome to SDN.
    Check this
    EXIT in Loops and Modularization Units
    Basic form
    EXIT.
    Effect
    Within a loop structure:
    Terminates looop processing (DO, WHILE, LOOP, SELECT).
    Within subroutines and other modularization units (but not in a loop structure):
    Leaves the subroutine or modularization unit (FORM, MODULE, FUNCTION, TOP-OF-PAGE, END-OF-PAGE).
    Outside loop structures and modularization units (report processing):
    Terminates report processing and triggers list display.
    But not sure about
    atexit() .. ,may use in Object Oriented Programming.
    (C++)
    "At exit-command in module pool."
    Mohinder
    Edited by: Mohinder Singh Chauhan on Aug 1, 2008 8:06 AM

  • What is exact diffrence between Error and Exception

    what is exact diffrence between Error and Exception....and also give me
    definitions.....i would very thank full to given answer to me.

    Error may or may not be handled by the compiler or JVM there are many errors like Assertion error,stack over flow error out of memory error etc..
    Exception is the abnormal condition and these may be handled by the compiler.There r many exceptions like clone not supported, interrupted exception,i/o exceptions...Exception can be handled by using try catch blocks.

  • My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

    My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

    Hello Douglas,
    Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro.  I recommend the following steps for this issue:
    Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
    Built-in iSight cameras
    These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
    See if the issue is application-specific.
    Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
    See if the issue is user-specific.
    Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
    Find out if the computer recognizes the iSight
    Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
    Reset SMC or PMU
    Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
    If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
    You can find the full article here:
    How to Troubleshoot iSight
    http://support.apple.com/kb/ht2090
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • What's the implicit joins and how to configure it?

    Hello guys
    what's the implicit joins and how to configure it? What's the purpose of implicit and explicit joins?
    Please help
    Thank you

    Thus, on my side, I think that :
    Explicit join define the join condition between the key column from the table.
    (table1.di = table2.id)
    While
    Implicit Join define :
    * the type of join outer, inner, ...
    http://gerardnico.com/wiki/dw/join/start
    * And the relationship (one-to-many, cardinality)
    http://gerardnico.com/wiki/dw/data_quality/relationships
    And all this information are used to generate the statement (query).
    And I don't really know why you have two type of key :
    * Physical Foreign Keys
    * Logical Foreign Keys
    Regards
    Nico

  • What are the key benefits and limitations of new pricing model of X5-2?

    What are the key benefits and limitations of new pricing model that started with X5 version?

    1. Elastic Configurations
    Size/price hardware by the number of servers; Fixed configs no longer required
    Start with 2 Database Servers and 3 Storage Servers. Incrementally add database or storage servers online.
    2. Capacity-on-Demand (CoD)
    Upon installation, activate 40-100% of the cores per server and reduce software licenses; Applies to Eighth Rack now too
    Activate and license more cores when needed; Active cores may not be deactivated
    3. OVM and Trusted Partitions
    License software on Virtual CPUs within a VM; Ideal for special-purpose DB options
    You can mix different combination of options for different DB on one Exadata.
    OVM has no License cost; support is included with premier hardware support
    Limitation:
    At least 40% of usable cores on the machine must be licensed for Oracle software
    Cannot use both OVM and CoD to license less than 40% of cores
    A server must be virtualized or non-virtualized – not mixed
    A RAC cluster can mix virtualized and non-virtualized servers
    4. “Flash Drive” License Metric for EF Storage Server Software
    $20K/drive; 8 flash drives/EF server vs 12 disk drives/HC server = 33% higher list
    Can transfer licenses between Flash Drive (2 licenses/drive) and Disk Drive (1 license/drive) – part # is the same

  • What is the windows server 2013 license version than I need to install workflow manager 1.0

    what is the windows server 2013 license version than I need to install workflow manager 1.0?
    enterprise or standard? can I install it on datacenter?
    please provide me with the reference.
    thanks

    Workflow Manager will work with either SharePoint Enterprise or Standard.  It doesn't work well with Foundations since it depends on User Profiles to pass user identity to the workflow.  And yes you can install it on Windows Server datacenter edition.
     Here are the supported platforms for installation
    http://msdn.microsoft.com/en-us/library/jj193487(v=azure.10).aspx
    This article talks about integration with SharePoint and states that Foundation is not supported, but it doesn't differentiate between the Server editions, so any edition will do.
    http://technet.microsoft.com/en-us/library/jj658588.aspx
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Has anyone developed a site for podcast in Muse?  If so what are the pro's and con's vs. using Wordpress?

    have built a few sites in Muse and hope to host my podcast on a dedicated Muse created site.  I use BC for my sites.  Has anyone designed a podcast site in Muse and if so, what are the por's and con's opposed to just doing this with Wordpress and power press plugins?

    one-armed is the easiest to install - less disruptive as you can keep your current network unchanged.
    However, it requires special configuration to guarantee that the return traffic from the server goes back to the CSM.
    This is done by doing client nat which will prevent the servers to see the client ip address and therefore to create statistic based on client ip.
    There is a way to inser the client ip in the HTTP header, but it only works for HTTP.
    Router-mode is easier to understand and troubleshoot.
    The CSM is just like a router with vlans and routing between each of these.
    It requires a minimum of configuration.
    However, it is important to design correctly.
    For example I would recommend not to have client accessing the CSM directly.
    They should go through the MSFC first.
    Then I would recommend to have only 1 vlan between CSM and MSFC- this is because the CSM only uses 1 default gateway even if you can configure many.
    You never know which is active.
    The CSM also expect the traffic to come back on the vlan it went out. If you have multiple vlan it is difficult to control on which vlan the response will come back.
    Finally 'bridge mode' is good if you want to insert the CSM between the servers and their current default gateway without having to reconfigure the servers.
    This is a good solution.
    Disadvantage is that all traffic from servers will go through the CSM and it is more difficult to avoid in case you really need it.
    A little more complex to troubleshoot as well.
    Conclusion: bridge or routing mode is ok - avoid at all cost one-armed.
    Regards,
    Gilles

  • With Premiere elements 11, when Publish/Share (saving) a finished video, selecting H.264  .mov file type, what are the recommended Codec and Aspect settings for a crisp video and a small file size?

    With Premiere Elements 11, when Publish/Share (saving) a finished video, selecting H.264  .mov file type, what are the recommended Aspect and Codec settings , for a crisp video with a small file size?

    Gary Krouse
    We will customize a very detailed reply, but
    (a) What are the properties of your source media?
    (b) What did you or the program set as the project preset to match the properties of the source media?
    (c) What specific requirements do you have for this H.264.mov export file?
    File size can be a compromise between bitrate, file size, and quality.
    Thanks.
    ATR

  • What are the output type and Tcodes?+

    What are the output type and Tcodes?

    hi,
    ex-how to config output type.
    You will assign output types using Transaction NACE.
    Do the follow steps to assign output type
    1)Select Application Type V2 which will have description Shipping.
    2)Click on Output types button.
    3)Go to change mode by pressing Ctrl+F4.
    4)Select one output type which already exists
    5)Do Copy As(F6)
    6)Give your output type against Output Type field.
    7)Under General data Tab, Give Program and Form routine and Save the data.
    i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
    Check the following documentation
    In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
    If suppose data can be read from EDI then we should go for condition records.
    So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
    Go to the Transaction NACE.
    choose the related sub module.. like billing or shipping
    doubel click on Output Types
    Choose the Output Type for which whcih you wanted your script to trigger
    Then select the Output Type and double click on Processing Routine
    Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
    Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
    Device Types for SAP Output Devices (Detail Information)
    Definition
    The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
    The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
    You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
    How do I choose the correct device type?
    • In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
    These standard device types are completely defined and need no modification or extension before you use them in device definitions.
    • You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
    • Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
    • Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
    • If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
    Attributes of a Device Type
    A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
    • Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
    • Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
    • Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
    • Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
    • Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
    • Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
    regards
    siva

  • I have the Jetpack 4GLTE, what is the Mbps download and upload speeds for this device?

    I have the Jetpack 4GLTE, what is the Mbps download and upload speeds for this device?

    The avgrage real speed will be more in the area of 25 to 38 Mbps  You would need to be in a strong signal area with high grade cell tower service and low customer use to even reach 50 Mbps. 
    From Verizon page.  Just be aware that using the MiFi 6620L can cost a lot of money. And you can thank the device's fast performance for that. In my testing around the San Francisco Bay Area, rathe device delivered blazing-fast download speeds that nged between around 10Mbps to around 40Mbps. At those speeds, you can burn through 4GB of data in just less than an hour. Once you reach the cap, of course, you'll have to pay somewhere between $10 to $15 for each additional gigabyte, depending on the plan you sign up for. 
      For more information follow link:  Verizon Ellipsis Jetpack MHS800L | Verizon Wireless

  • What are the logical structure and physical structure in oracle

    what are the logical structure and physical structure in oracle and how can allocate a DB block size as default size is 8192?

    From the Concepts Guide
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14220/toc.htm
    The physical structures are:
    Datafiles
    Control Files
    Redo Log Files
    Archive Log Files
    Parameter Files
    Alert and Trace Log Files
    Backup Files
    The Logical Structures are:
    Tablespaces
    Oracle Data Blocks
    Extents
    Segments

Maybe you are looking for