What is the dpi for a Keynote PDF

If I export a single slide from Keynote, as PDF, can anyone tell me the dpi for that PDF image? I need it to be 300 dpi.
Thanks, Panther

PDF doesn't have a resolution -- it is primarily a vector format, which means it is resolution-independent. So the text and any vector images will be output as native PDF vectors, and won't have a "dpi". Bitmapped images can be embedded into PDFs, and as far as I can determine, any bitmapped images will be output at whatever their actual dpi was when they were put onto the slide. (There is no way to get more resolution than was there originally.)

Similar Messages

What is the .dpi for a 42" television screen with a 1024 x 768 resolution?

Hello! I am fairly new to PowerPoint and I am designing slides to be seen on a 42" television screen and the resolution is 1024x768. I am designing my graphics in Photoshop to be inserted into the PowerPoint slide. My question is, what dpi do I need to use in photoshop to display correctly on the 42" 1024x768 res TV screen. I know you need 300dpi for print and 72dpi for computers. Thanks so much!

Are you sure your television is displaying at that resolution?
If it did, you just need to design a file at 1024 pixels by 768 pixels (I would go with 96 ppi, which is the PC logical inch), though any resolution (300 ppi, 72 ppi, 96 ppi) will suffice. Powerpoint might have a preference for 96 ppi, if you still design files in inches.
But you really need to figure out the actual pixel size of your display before you proceed, if you want optimal files.

What is the dpi for this monitor?

I had always thought that the Macintosh monitors were 72 dp, but I ran across a mention that they were 96 dpi, same as Windows. Is this true, I can't find a reference in the specs

PDF doesn't have a resolution -- it is primarily a vector format, which means it is resolution-independent. So the text and any vector images will be output as native PDF vectors, and won't have a "dpi". Bitmapped images can be embedded into PDFs, and as far as I can determine, any bitmapped images will be output at whatever their actual dpi was when they were put onto the slide. (There is no way to get more resolution than was there originally.)

Adobe X PDF files converted to jpg, edited and converted back to PDF have ragged, unclear text. I didn't have this problem with Acrobat 9 standard. What is the remedy for this. If this is the best I can expect, I won't be able to use X standard.

Adobe X PDF files converted to jpg, edited and converted back to PDF have ragged, unclear text. I didn't have this problem with Acrobat 9 standard. What is the remedy for this. If this is the best I can expect, I won't be able to use X standard.

I can't imagine any worse workflow than converting to JPEG to edit text, then back to PDF. Text in a PDF is a vector thing, smooth at all resolutions. And JPEG is made for photos. EVERY conversion to JPEG and back loses quality but how much loss there is will vary.
If you must go to an image format, try PNG.

What is the default for the "Display PDF in Browser" setting?

What is the default for the "Display PDF in Browser" setting in Adobe Reader 9 and X?
Also, are any statistics available on what proportion of users have this setting set to on?

For all three the default is "checked".
Be well...

What is the URL for the keynote help link in the keynote app

what is the URL for the keynote help link in the keynote app on the ipad. I have a firewall in place to keep student from accessesing unwanted/restricted information, where can I find the url/ip address to unblock this site. Thanks

Hi Ravi,
As such there is no path for directly opening Visual Composer from the Netweaver system (I suppose this is what you mean by the acronym nws). Visual Composer can only be opened by the URL as given by Rahul:
http://<hostname>:<port>/VC
Bye
Ankur

How to find out the DPI of an existing PDF doc?

When I print a doc/web page with a pdf printer driver then I can adjust the DPI for the print.
Ok. But how does this work the other way?
When I have a pdf doc and want to find out the DPI with which it is printed ?
How can I find out this value?
Matthias

PDFs do not have a dpi. Only individual raster graphics in a pdf have a
resolution. In a single pdf there can be several different raster and
vector graphic objects.
The Acrobat application doesn't control the dpi that a printer uses to
rasterize a printed pdf file. That is done by the printer driver---most
often an OS function. The dpi uses to print a pdf has nothing to do with
the pdf specification.
Mike

How to check the DPI for images on pages

hi,
I want to check the DPI for images programatically, is there any function available in acrobat SDK,
If not what other option we have to check the DPI for images programatically.
Thank you,

You don't mention which parts of the SDK, but you can use the Preflight feature of Acrobat via either JavaScript or C/C++ (plugin) to generate a report of images in a document and their information (including dpi).
You can also write a plugin to iterate over each image individually and get its properties.

What is the best way to post PDFs in iWeb?

What is the best way to publish PDFs in iweb so that visitors can open the document, rint and/or save the document?

jb ~ Welcome to the Support Communities. Rather than creating a new, almost identical thread to correct a typo, you can edit your post within 15 minutes:
...Each edit re-starts your 15 minute window for re-editing.

What is the url for executing PL/SQL via 9i http

what is the URL for 9i http server pl/sql routines that I just compiled? I don't run 9ias just the 9i http server
http://machine:port/?????????/procedure_name
thnx
endre

do this if you are still having problemd
CREATE AND SETUP NEW USER
The second step is to create an application user that will
own the code for this example. Connect to SQL*PLUS as a user with
DBA rights, and execute the following commands:connect
SQL> CREATE USER user IDENTIFIED by user;
SQL> GRANT CONNECT, RESOURCE TO user;
CONFIGURE DAD IN THE PL/SQL GATEWAY
The third step is to create a new DAD.
Enter the PL/SQL gateway configuration menu. The generic address to the
page is
http://<machin:port/pls/admin_/gateway.htm
The is specified in your plsql.conf file. By default the address
will be
http://..:/pls/admin_/gateway.htm
(Replace ..: with the valid entry for your
configuration, e.g. www.acme.com:8080).
Click on the link 'Gateway Database Access Descriptor Settings' to access
your DAD settings. Then press the link 'Add for WebDB 2.x configuration'
to create a new DAD. Enter the following values:
Parameter Value
Database Access Descriptor Name give name
Schema Name the user you created
Oracle User Name the user you created
Oracle Password the password of the user
Oracle Connect String <- found in your
tnsnames.ora
Document Table documents
Document Access Procedure user.package.procedure
Extensions to be uploaded as LONG RAW
Leave the other parameters as they are. If you are not using an 8i database
or need to use the LONG RAW datatype for
some reason, you can place an '*' in the "Extensions to be uploaded as LONG
RAW" field. You can also limit this to
specific file name extensions such as jpg or pdf by entering the extensions
and using a comma to separate the
values. Click the OK button to save the DAD configuration.
Hope this helps

What is the Tcodes for Uploading of data using BDC & CATT

PP members:
I was going through the cutover activities , and what I understood is we transfer all the legacy system data into SAP before going live
The data upload follows certain steps (depends on the organizational design load strategies)
First we upload all the master data ( material master, BOM, W/C's & Routings)
Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as materials of the previous stage and necessary adjustments shall be made after cutover day
At this point, I could not able to understand what does the author mean materials of the previous stage
Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
Is it a must to use only LSMW tool to upload master data or any other upload tools are fine
Lastly,. I am not sure about the Tcode of CATT & BDC
Summary of the questions:
1.What does the author mean material of previous stage, for WIP materials during cutover activities
2. Is it mandatory to use only LSMW tool for uploading for master data
3. What are the Tcodes for upload tools CATT & BDC ?
Thanks for your time
Suren R

Dear,
1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM.

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10?

Hi Guys,
What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10?
I have to write an AP Invoice Aging Report in Discoverer to show all unpaid invoices that have been transferred into GL... Business wants it to match one-to-one with the AP Trial Balance standard report...
Business wants to run the report for any date in a past...
The report has two parameters:
As Of Date - the same as As of Date for the AP Trial Report
Trial Balance Run Date - the date when Trial Balance was run...
Conditions are:
TRUNC(Invoice Date) <=TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
TRUNC(NVL(Payment Date,'01-JAN-5000')) > TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
TRUNC(Invoice Creation Date) <= TRUNC(NVL(TO_DATE(:Trial Balance Run Date),SYSDATE))
Distr Accounting Date <= TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
NVL(Distr Creation Date,Invoice Creation Date) <= TRUNC(NVL(TO_DATE(:Trial Balance Run Date),SYSDATE))
Show_Flag = 'YES', where:
Show_Flag = CASE WHEN ( NVL(Cancelled Date,'01-JAN-1901') > NVL(:As Of Date,SYSDATE) AND NVL(Inv Amount Aud,0) = 0 ) THEN 'YES' ELSE ( CASE WHEN NVL(Inv Amount Aud,0) = 0 THEN 'NO' ELSE 'YES' END ) END
There is a difference between the logic of my report, and the logic of AP Trial Balance...
Could you please advise what I'm missing?
Thanks,
Iana

What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10? You can get the code by opening the report in Reports Builder and get the query.
Or, enable trace/debug as per (FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]).
Thanks,
Hussein

What is the number for Verizon Wireless Corporate Customer Service Complaint for CA

My Complaint: I have been a Verizon Wireless customer for approx 20 years. I called customer service to seek an early upgrade for my daughter's phone. She is away in college and her phone is malfunctioning. She is eligible for an upgrade in approx 6 weeks so I did not want to spend the money on a replacement phone when since we were planning on updating to something newer. The customer service rep to me they could not do the early upgrade an to call back in a few weeks. After explaining this was unacceptable (I do not like the idea of a young female being out of state and away from home with no reliable means of communication), she places me on hold to later return with the only offer of I must purchase a new device through her ( over the phone) which will be shipped to me, the phone was priced $100.00 more than the online price (they will not price match), plus i must pay $30.00 upgrade fee, $35.00 activation fee and taxes on the retail price of the phone. I am upset and disappointed with the quality of service provided by Verizon being a 20 year customer. If not for the seriousness and urgency of this matter, i would not have asked for an early upgrade. It is times such as these that you get to see how much of a "valued customer" you really are. I guess you are valued as long as you pay your bill and continually purchase their products. I would like to speak with someone from Verizon's corporate or customer relations department. As of now I am really considering changing my service to a different provider. I have multiple accounts with Verizon and i will canx each after the current contract committment expire (starting with my daughter's phone which expires in 6 weeks) In the meantime I will go purchase her a new phone with someone else and take comfort knowing she will have reliable communication.

I started with them in 1985. It has been wonderful service but very expensive. They seem to operate on day of deposit day of withdrawal. That means that I have no benefits nothing beyond the normal customer if I don't pay my bill they shut me off. That's why I have switch to another provider and I have better service lower cost and better phones. you can't beat other providers I mean it. Please don't expect more from verizon other than a "pay me more money and I'll do what you want" because it's all about money. Read the transcripts from current Verizon employees all over the internet. The company is going down and they're taking customers with them.
msvat <[email protected]> wrote:
msvat created the discussion
"What is the number for Verizon Wireless Corporate Customer Service Complaint for CA"
To view the discussion, visit: https://community.verizonwireless.com/message/1113982#1113982
>

In Address Book, Lion, what are the checkmarks for when you Edit a Contact?

In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?

I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using.

What is the dpi for a Keynote PDF

Similar Messages

Maybe you are looking for