What is the drive name of the Mac hard drive?
What is the drive name of the Mac hard drive?
By default it is called Macintosh HD. But the user can change the name. Why do you ask?
Similar Messages
-
I am not much of a computer technician. I bought a time capsule thinking I could use this for an external hard drive and keep my MAC hard drive free. Was I mistaken? Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??
Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??
TC was designed to backup your Mac. The TC literature is pretty clear about this:
If your Mac's hard drive has a problem....it will sooner or later....you can use your backup on the TC to rebuild your Mac.
But.....if you move all of your data to the TC from your Mac....you only have one version of that data now, and it is on the TC.
Have you thought about what will happen when....not if....the TC has a problem? Since the only version of your important data was on the TC, and the TC has failed......you lose all of your data.....because you have no backup.
A much better plan would be to add a USB or FireWire hard drive and connect it directly to your Mac. Move the data on your Mac over to the hard drive.
Then, the TC will backup both your Mac and the hard drive. So, you have original data on on one drive and backups on another drive.
That would be a minimum backup plan. Most of us have more than one set of backups. -
What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.
No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2? -
And how do I turn off FACES?
I copied the iPhoto library to an external hard drive, then imported it to the new iPhoto. It turned my 2000 photos into 12,000!!
According to you youo did not do what I instructed - you said you imported the old library into th enew library which can easily take a 2000 photo library and turn it into 12,000 including two ro three versions of each photo pus all the face thumbnails
The correct procedure has NO importing involved
drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac
That is it
LN -
When I power up my Mac-Pro I only get a flashing file folder with a ? inside the folder. I suspect my hard drive is maxed to capacity can anyone help me as to what I should do?
Whatever the problem is you no longer have a bootable system. You need to try reinstalling OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I recently added my old mac hard drive to a new macbook with an SSD as my main OSX drive. I am having trouble with permissions in viewing my old hard drive, when I save a permission when I reboot the full access is changed again . What is the best way to get complete access to my old hd installed in my new Macbook?
Open the Get Info window for the old drive. Click the Lock icon on the bottom of that window and type in your password. In the permissions area click the Plus sign ( + ) and Add your Username to it and set it to Read & Write. Close that window. you should now have full access to all the files.
-
I have a power mac g4 with mac os 10.4. 11 , I want to change the hard-drive
,what program can I used to transfer one hard-drive data to another hard- drive on this mac pc.The Disk Utility, Carbon Copy Cloner, SuperDuper, or similar software. For best results, place the second drive inside the computer or in a FireWire enclosure and boot the computer from it before removing the internal drive.
(66989) -
What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?
I agree with teh OWC sggestion above, but why must it be USB powered? I find that far more unreliable, and the low power devices slow.
I'd frankly get a good external enclosure and buy a bare drive. But the OWC stuff is quite good - vastly better than some of the majors (WD being aprime example of stuff that's boderline quality and often not compatible)
Grant -
What is the file name of the thunderbolt driver?
Does anybody know the file name of the thunderbolt driver that will allow me to access a thunderbolt drive from Windows? The BIOS see's the Promise controller/drive, but device manager doesn't see it. The boot camp support files from Apple are not installing automatically - it fails with no specific error except try again. I'd like to try and load the thunderbolt driver manually. Does anybody know the file name and folder this driver would be in?
Thanks.
Stephen
27" iMac purchased from Apple in August 2013
32GB RAM
OS X 10.8.5
Promise R6 12TB
Windows 7 Proscroll down they have a special faq for thunderbolt in windows
http://support.apple.com/kb/HT5219
found using this google search if you want other sources
https://www.google.dk/search?client=opera&q=name+of+the+mac+thunberbold+driver+i n+windows&sourceid=opera&ie=UTF-8&oe=UTF-8#q=thunderbolt+driver+in+windows&spell =1 -
What is the maximum hard drive height for installing two hard drives in the 2011 Mac Mini
In a few months I'll be buying a Mac Mini. I want to upgrade the stock hard drive with a Seagate Momentus XT Solid state Hybrid Drive(720 RPM), which is 9.5 mm tall.
I would like to add a second hard drive, a Seagate Constellation(7200 RPM), which has a "15mm z-height".
I want to use those hard drives so I can have a speedy Mac Mini, but also have a great amount of storage(1.75 terabytes). My largest priority is storage space, but I also would like to use 7200 RPM hard drives as speed is also a priority.
I would like to know if those two hard drives would both fit in the 2011 Mac Mini.
And also, what does "Z-height" mean in regards to hard drives?9.5mm is the standard 2.5" drive height. This thread says one 15mm drive may fit, but recommends against a Seagate Constellation drive, due to the amount of power it draws.
One option would be to add an external mini-stack, then storage space becomes a secondary concern. If you want speed, install an SSD for the operating system then put everything else on secondary storage. -
In specific, I own a 2007 Macbook Notebook, and it is an Intel Core 2 Duo MB21.00A5.B07. Last year, it became necessary to replace the hard drive, and was informed that the reason for the replacement was that the hard drive had reached the end of its lifespan.
My question is how long do Macbook notebook hard drives typically last? This also is in the context of frequent use of the notebook.
Additionally, is it a good idea to replace the hard drive more then once, or will the hard ware on the notebook, after I'm assuming about six or so years, be too out of date to accommodate a second or third hard drive replacement?
Also, since the replacement was still covered under an applecare plan (it's expired now), the general cost of replacing a Macbook notebook hard drive is not known? What is the cost generally expected of a hard drive replacement? This is in relation to repairs conducted at an applestore location (as opposed to a third party repair center).justinfromlos angeles wrote:
Also, this means that, the settings of a system like Snow Leopard, in addition to all other personal settings from a current hard drive, can be copied to and from an external hard drive?
Your entire system can be copied to an external HD in bootable form. It's generally referred to as cloning, and there are a number of applications available to assist in the task.
SuperDuper
CarbonCopyCloner
LaCie Silverkeeper
To name but three.
Furthermore, once cloned, should you have to replace the internal drive, it's easy to boot from the external and clone the system back to the internal.
justinfromlos angeles wrote:
If so, do you know where one can purchase an external hard drive and a replacement hard drive?
As I don't live in the US, it's difficult for me to reccommend retailers, but any computer store (including Apple) can supply external HDs. Be aware that not all HDs from some manufacturers will play well with Macs; Western Digital I believe needs careful selection of the correct model. There are plenty of contributors who can no doubt help on that front. Personally I use LaCie and Iomega. Note that these are purpose built externals and come with their own enclosure and all cables reqd.
One thing you will need to do with most of them is to use Disk Utility to partiton them correctly (GUID system for Intel Macs) and set the file system to Mac Extended (journaled) before cloning.
justinfromlos angeles wrote:
There is one last question. Say I've replaced the hard drive on the same computer for nine years or so. Despite the hard drive being new, would the hardware of the computer be too out of date to accept an up to date replacement hard drive?
The hardware of the computer dictates what sort of internal drive you buy; earlier models used IDE interfaces, current models use SATA and these are not interchangable. However System Profiler will tell you what sort you have. It's still possible to buy compatible HDs for the early iMacs, c. 1998/99 so there's no reason to believe your model will suddenly become defunct. -
I have a mac mini with an i7 dual core processor. It is perceptably slower than my macbook pro with a quad core i7. Does the mac mini server have the same hardware configuation as the regular mac mini with server software or is the hardware different (aside from the i7 quad core and dual hard drives)? I want a mini with a quad core i7...
Your assumption is correct. The server does however only
have the Intel HD3000 graphics like the base model with
no option, at this time, for the discrete graphics chip. So,
depending on what you are using it for, that could be a deal
breaker. Remember that your MBP does have a discrete
graphics chip.
I have a 2011 Mini Server connected to a Thunderbolt display
that gets used as an engineering workstation and general
personal use (some photo editing, LP restoraton, general
internet browsing). You simply just not enable any of the
server services. I find the combination to work quite well
for my purposes. I also have a 13" 2.7 GHz i7 Macbook Pro
which is pretty much strictly for work. As far as CPU
power it is pretty much equivelent to your Mini. For the most
part I find the Mini does outperfom my MBP. I heavily use
Parallels and Windows7 virtual machines, so the more cores
the better.
So, If you do a lot of CPU intensive stuff that is multithreaded,
the Server may help. If it is graphics intensive and your software
heavily leaverages the GPU, you may actually take a hit on
performance. -
I have an alias of one of my external hard drives in my trash. When I tried to delete it, it showed that I was deleting 80,000 files and counting. I stopped the delete process and when I clicked on "show original" all my external H.D.'s and my Mac hard drive show up. How do I delete this alias from the trash without loosing all my files? When I tried to drag it back to the desk top, it just made a duplicate and remained in the trash. When I turned off the external H.D., the trash was then empty. Tried rebooting the computer and then turning the external hard drive back on and the alias shows up in the trash again. Much help appreciated.
RichIn Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474 -
What are the icons next to the printer name in the print sheet?
Ever since I upgraded to OS X Lion, I have noticed something different in the print dialogue. First the technical info: I am using a 2009 Mac Mini (4 GB RAM, OS 10.7.3) and I have a couple of printers that I use - one is a Brother laser printer (shared from an iMac, running 10.6.8) and a Canon Pixma Pro 9000, connected via USB to a Time Capsule.
When I hit Command-P to bring up the print sheet, I now get icons on the left hand side of some of the printer names in the printer list. One looks like a road sign - diamond shaped with a walking person in it, and the other is a circle with a wavy line (tilde?) in it. The other printer names have no icons next to them. I gather that the circle-and-tilde means "printer not available" (or something similar) - even though the printer is there!!! And then I wonder why the other printer names have no icons, and I have no clue what the "walking person" sign means.
I'm adding a couple of images so you all can see what I'm talking about:
What do these icons mean? I can find NO reference to them - even in Apple's knowledge base article http://support.apple.com/kb/HT4670 - this just looks like the screen shots from the 10.6 Snow Leopard page. I looked in the OS X Lion Missing Manual, but it has the same screen shots with no explanation of the icons.
This is pretty minor, but it's been bugging me for a while. Any explanation or reference to these icons would be appreciated!
Richard
Message was edited by: Richard Williams Jr (had to correct the link!)Richard Williams Jr wrote:
Wow, impressive, thank you! Is there a listing or other resource available that can tell me what all these symbols mean? Or are they the only ones?
This Mac 101: Printing article mentions some of the icons you will see in 10.6. And there is also the Mac 101: Printing article for Lion that shows some symbols. Neither show the icon you are seeing for the Brother but this is icon has been around for a while and used for warnings/information alerts. -
After renaming my MAC hard drive, Acrobat, Illustrator and Bridge fail to launch. Acrobat returns the error message "An internal error occurred". I've checked this out and it seems related to user permissions. The version is Acrobat X. My machine has multiple user accounts. Any help would be appreciated. I renamed the drive to its original name but to no effect. RR
I resolved the issue.
The problem is indeed a permissions issue with the Adobe Application Support folder.
First, in MAC OS Lion the ~/Library/ folder is hidden by default. You must unhide it in order to proceed. (if it is already visible in your ~/User/ folder, proceed to Step 4.)
Next launch the Terminal application.
At the command line, paste the following command line: chflags nohidden ~/Library/
Go to /Users/youruserid/Library/Application Support/Adobe
Get info on the ~/Adobe folder and reset your permissions to read/write and apply to all enclosed folders
Problem solved. RR
Maybe you are looking for
-
I just got my Ipad2 and have my email accounts set up. I have sent messages but when I go to the folder icon at the top right of the page and tap on SENT emails it makes the inbox email on the screen disappear. How do you check your sent emails? T
-
Updating Firmware on an Olympus E1 via Olympus Viewer
I installed 10.4.3 today and tried to check for a firmware update for my Olympus E1 camera. This is done via Olympus Viewer software. I have the latest version, 1.3.2. I set the camera to PC control and connected it to my PowerBook (G4 17" 1.33GHz) v
-
How to get number document of Original documents
Hi all ! now I have a request how to obtain original documents. Specifically as follows: I have an Invoice 1. I'm partial payment for that Invoice. The system generates a new invoice and it will be the clearing document for an invoice. Then I continu
-
Window content jumps up and down by itself
I have installed Snow Leopard a few days ago and I am experiencing a phenomenon which I could not find any reference to up to now. I wonder if I have activated some "feature" without knowing. What happens is that when I scroll a window, in any way (a
-
How to create a scrollable menu ?
I have large number of menu items; I can�t view the many menu items, because menu list size biggest than the screen size. How to solve this problem. There is any way to create a scrollable menu. Thanks in Advance , Regards , Ganesh Babu .