What is the driver for wireless adapter in solaris10

any body is able to configure the wireless adapter

Wifi is now available for Solaris 10 and OpenSolaris in experimental unsupported form. It works for open and WEP. For WPA, it works in some cases only. For details, see
http://www.opensolaris.org/os/community/laptop/wireless/
For me I use the Atheros driver, ath, on a IBM Thinkpad T40. I works with no encryption, but I use WPA with a long key, which doesn't work (yet).

Similar Messages

What is the number for Verizon Wireless Corporate Customer Service Complaint for CA

My Complaint: I have been a Verizon Wireless customer for approx 20 years. I called customer service to seek an early upgrade for my daughter's phone. She is away in college and her phone is malfunctioning. She is eligible for an upgrade in approx 6 weeks so I did not want to spend the money on a replacement phone when since we were planning on updating to something newer. The customer service rep to me they could not do the early upgrade an to call back in a few weeks. After explaining this was unacceptable (I do not like the idea of a young female being out of state and away from home with no reliable means of communication), she places me on hold to later return with the only offer of I must purchase a new device through her ( over the phone) which will be shipped to me, the phone was priced $100.00 more than the online price (they will not price match), plus i must pay $30.00 upgrade fee, $35.00 activation fee and taxes on the retail price of the phone. I am upset and disappointed with the quality of service provided by Verizon being a 20 year customer. If not for the seriousness and urgency of this matter, i would not have asked for an early upgrade. It is times such as these that you get to see how much of a "valued customer" you really are. I guess you are valued as long as you pay your bill and continually purchase their products. I would like to speak with someone from Verizon's corporate or customer relations department. As of now I am really considering changing my service to a different provider. I have multiple accounts with Verizon and i will canx each after the current contract committment expire (starting with my daughter's phone which expires in 6 weeks) In the meantime I will go purchase her a new phone with someone else and take comfort knowing she will have reliable communication.

I started with them in 1985. It has been wonderful service but very expensive. They seem to operate on day of deposit day of withdrawal. That means that I have no benefits nothing beyond the normal customer if I don't pay my bill they shut me off. That's why I have switch to another provider and I have better service lower cost and better phones. you can't beat other providers I mean it. Please don't expect more from verizon other than a "pay me more money and I'll do what you want" because it's all about money. Read the transcripts from current Verizon employees all over the internet. The company is going down and they're taking customers with them.
msvat <[email protected]> wrote:
msvat created the discussion
"What is the number for Verizon Wireless Corporate Customer Service Complaint for CA"
To view the discussion, visit: https://community.verizonwireless.com/message/1113982#1113982
>

What is the process for connecting ethernet. Have ethernet cable connected to stereo received for internet radio and Blue Ray. However Network System Preferences indicates ethernet not connected and has red dot to left. Note Airport wireless is working.

What is the process for connecting airport extreme ethernet? I have ethernet cables connected to stereo receiver for internet radio and another to blue ray player. The system preference network indicates "ethernet not connected" with red dot to left of this message. The airport wireless works and has green dot to left of it. The stereo receiver and blue ray player do not respond and give message not connect to internet. Thank you. / cfpirate

It worked for me finally. I took out the DNS numbers in airport admin utility, and restarted the airport express. I do not remember putting the DNS numbers in, I wonder from where the airport express got those numbers.
After restarting, it worked.
Thanks!

I want to transfer files from a functioning hard drive in a nonfunctioning MacBook Pro to an external drive. I have an IDE/SATA drive adapter. The files won't fit on the drive for a working computer I have. Can I use it to transfer files to the external?

I want to transfer files from a functioning hard drive in a nonfunctioning MacBook Pro to an external drive. I have an IDE/SATA drive adapter. The files won't fit on the drive for a working computer I have. Can I use it to transfer files to the external drive?

Good luck and you are welcome.
Like I said, I bought one of their inexpensive enclosures and now can use the hard drive just as a source for the files that are on it...my external drives are much larger and faster so I just plug that drive in when I need something from it.
This one is on sale for $16 http://eshop.macsales.com/item/OWC/ES2.5BPU2S/

What is the proceedure for replacing a hard drive (after failure) for RAID 5 with IX4-300D?

I have the IX4-300D with 4 hard drives (identical Seagate drives) using RAID 5.
Someday a hard drive will fail and I and I have to replace it. I read through the users manual briefly and I didn't see any documentation on how to perform a hard drive replacement and not lose any data.
So here are my questions:
1) I know per the instructions that Lenovo prefers using identical hard drives. Let's say in 2 years, 1 hard drive fails. Most likely, the same model Seagate hard drive will not be available. So will using a replacement hard drive by the same manufacturer with similar specifications work?
2) Will the front panel (or the software) tell me which hard drive has failed?
3) What is the proceedure for replacing a hard drive after a failure occurs? I read that the IX4-300D is not hot-swappable. So do I just power the IX4-300D down, replace the hard drive, and turn it back on?
Solved!
Go to Solution.

Hi exceptionalht,
It is best to replace the hard drive with one that is the same manufacturer, rotational speed, and capacity, so it does not have to be exactly the same model.
The front panel should show which drive has failed. If not you can check the web interface to find out.
That is the basic procedure for replacing a hard drive. You can see a more detailed instructions here: Installing hard drives in an ix4-300d
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

What is the brand for mini 110-4111ej Hard drive?

What is the brand for mini 110-4111ej Hard drive?
This question was solved.
View Solution.

HP uses different brands to fit the need for the SATA hard disk, so there is no specific brand that I can state. Why don't you use the hard disk test that is present in the BIOS?
Replacement hard disk specifications
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

What's the purpose for the two Wireless Antennas on a WAP?

I have a very simple question, that I'm a little confused about. Here it goes.
Most Access Points have two antennas. One is labeled as LEFT/PRIMARY and the other is RIGHT.
What is the purpose for the two antennas? When I have one antenna connected it works without any issues. Can I just use the LEFT/PRIMARY antenna for wireless connectivity? What are the purpose for the two?
And we are talking about a single band, 802.11b/g NOT 802.11a.
Thank you!

Hi Rashida,
The use of two Antennas on these AP's is used for "Diversity Mode. In many cases, 1 single Antenna will work nicely. Here is an explanation for the use of two Antennas :)
This describes the use of 2 **Identical Antennas in "Diversity" Mode;
The purpose of diversity is to overcome multipath reflections. Diversity antennas that share the same physical housing are placed at an optimum distance apart. The maker of the particular antenna determines that distance based on the characteristics of the antenna. When you use a pair of antennas with matching characteristics to provide diversity for cell coverage in your facility, the guideline is to put those matched antennas at a distance apart from each other that is equal to a multiple of the wavelength of the frequency that is being transmitted. The 2.4 GHz wavelength is approximately 4.92 inches. Therefore, to support diversity on a 2.4 GHz radio with two separate antennas, the antennas should be spaced approximately 5 inches apart. The antenna pair could also be spaced at multiples of 5 inches, but the distance between should not exceed 4 multiples: reflected waves farther apart than that are likely to be so distorted and different in delay spread that the radio could not work with them.Because each antenna is selected by itself, both antennas must have the same radiation characteristics and be positioned to provide similar cell coverage.
**** Two antennas connected to the same access point must not be used to cover two different cells.****
From this good doc;
Multipath and Diversity
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008019f646.shtml
A diversity antenna system can be compared to a switch that selects one antenna or another, never both at the same time. The radio in receive mode will continually switch between antennas listening for a valid radio packet. After the beginning sync of a valid packet is heard, the radio will evaluate the sync signal of the packet on one antenna, then switch to the other antenna and evaluate. Then the radio will select the best antenna and use only that antenna for the remaining portion of that packet.
On transmit, the radio will select the same antenna it used the last time it communicated to that given radio. If a packet fails, it will switch to the other antenna and retry the packet.
One caution with diversity, it is not designed for using two antennas covering two different coverage cells. The problem in using it this way is that, if antenna no. 1 is communicating to device no. 1 while device no. 2 (which is in the antenna no. 2 cell) tries to communicate, antenna no. 2 is not connected (due to the position of the switch), and the communication fails. Diversity antennas should cover the same area from only a slightly different location."
Diversity Antenna Systems
Diversity antenna systems are used to overcome a phenomenon known as multipath distortion of multipath fading. It uses two **identical antennas, located a small distance apart, to provide coverage to the same physical area.
From this Antenna reference guide;
http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008008883b.html
Hope this helps!
Rob

What is the URl for Adapter Monitoring?

My Xi system is not recognizing host name. It needs the IP to be specified.
I added it in the hosts file of my front end machine.
But it is still not helping.
So Can you pl let me know where else I can change to reflect IP instead of host name?
Also what is the URL to access Adapter Monitoring.
Thanks,
Bhaskar

Hi,
then you made somethong wrong. At least the hosts file should help..
Adapter Monitor:
http://<xi_box_adress>:<port>/MessagingSystem
a, it is case sensitive
b, there are of course only java based adapters (no idoc)
ooops, now I see.. Yes, Adapters are of course in the Runtime Workbench.. Component Monitoring and then Adapter Monitoring and for some adapters Communication Channel Monitor
Peter
Message was edited by:
Peter Jarunek

What is the fix for a wireless keyboard that eats batteries?

What is the fix for a relatively new wireless keyboard that eats batteries?

Part of it may be something in the battery reporting software.
I got my first wireless Apple KB with a new iMac last November (2011) and, disliking the abbreviated design for desktop use, bought a wired board for the iMac and appointed the wireless to be the travel keyboard for my MacBook Pro. I used it on a routine basis and the battery level stayed at 100 percent until June, when it suddenly read 50 percent. Today it's still 50 percent. Makes absolutely no sense but it works.
It's been on most of the time, including a couple of trips when I failed to turn it off and it was running in my backpack for days. It still ahs the batteries Apple shipped with it.
My Magic Trackpad and Magic Mouse, on the other hand, showed normal battery decay over time when connected to the same computer
If the keyboard stops working, that's one thing but, if you are seeing odd percentage reports and the thing still works, just keep using it until it dies. A couple of spares in the computer bag take very little space.
I've not seen a battery calibration feature mentioned for input devices like we have for the "smart" batteries in notebook Macs.

Or..what is the driver named?? (& Where is it????) for Win 2K?

If someone can tell me the name..location, etc of the driver for Windows 2000..I just tell the Hardware Wizard where to look..Anyone know??....The "5 R's", etc?..Been there..done that..in this case...

fixed it myself

Does the Xbox 360 wireless adapter even work with the WRT54G wireless router?!!? If so, how???

I just bought a WRT54G wireless router (Ver 8.0; firmware updated to latest). I have successfully connected my wireless laptop using WEP security, but I'm at wits end trying to get the Xbox 360 wireless adapter to work. (It worked just fine with my Netgear router until that router recently died.)
When I do the "Test Media Connection" routine (you XBox 360 users know what I'm referring to), the Xbox immediately recognizes the Network Adapter and indicates that it is connected to the Wireless Network, but it inevitably fails the next step in the process: IP Address. I have the set-up for the IP address to be assigned automatically by the router (which is set for DHCP Server enabled).
I have gone around the mountain innumerable times myself and then with well-meaning friends who say try this, try that, try this, try that. I've had to re-establish my laptop set-up so many times I wanna scream!
Are the Xbox 360 wireless adapter and the WRT54G even compatible? If so, what am I missing here? I'm not too technical and obviously in over my head, but this ought not be that hard.
Please, please do NOT respond unless you KNOW the answer! I don't mean to be curt, but I'm over / past "suggestions to try."
Thank you VERY much for your time and consideration if you can help me.

I don't think that the X-BOX adapter is not compatible to wireless rotuer .... there are few settings you can try on the router ... Access router setup page ... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6) Please try to test your xbox live. Hope it works ...

Where can I download the driver for Satellite A200-121?

Hello Team,
I need assistance. Where can i download the driver for my laptop?
Model Name: Satellite A200-121
Model No: PSAE0E
Appreciate your help. Thank you!

> I tried following the steps in all forums but my wireless LAN is not being recognize.
What does this mean exactly? Is Wlan card visible in device manager under Network Adapters? Can you see an unknown device or an Ethernet controller beside the LAN card?
From my knowledge the notebook supports the Intel 3945ABG WLan card
Did you install the Intel WLan driver for this Wlan card?

What is the price for Photoshop CS3?

what is the price for Photoshop CS3?
I have an old mac PRO (2008) and have problems with newer versions

kjersti fjøsne wrote:
I have an old mac PRO (2008) and have problems with newer versions
Your Mac Pro 2008 should have no problems with CS6. Not sure about CC or CC2014. Note that Adobe stills sells CS6 with a perpetual license.
I run CS6 13.0.6 on a 2996 Mac Pro 1,1 without any problems or slowdowns whatsoever. Just make sure you have your Mac equipped with plenty of RAM, a physically separate HD for Photoshop's scratch, and a video card with enough VRAM on it. See my machine's specs below.
Intel Xeon Mac Pro 1,1 [late 2006] 2.66 GHz Quad; 16 GB RAM; mutant/flashed, factory-overclocked 875/1225 "Apple PowerColor" ATI Radeon HD 5770 with 1 GB of GDDR5VRAM driving side-by-side dual 22"/24" monitors in Extended-Desktop mode; Mac OS X Lion 10.7.5 and Snow Leopard 10.6.8 boot drives; intrusive Spotlight and frivolous Dashboard permanently disabled; USB wireless 'n' available but connected to the Internet and networked via wired Ethernet. Photoshop CS6 13.0.6.

Cant install driver for display adapter (pavilon dv3)

Hi! i cant find and install driver for display adapter. i see on device manager that without "ATI radeon 5400 seri"
someone help me! thanks
This question was solved.
View Solution.

Hi QuanTrinh
What driver are you installing? Is it this AMD High-Definition Graphics Driver or some from the AMD website?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Tell me the driver for audio for series c500 and model c505tu

Tell me the driver for audio for series c500 and model c505tu

Hi: I already gave you the driver above for the PCI simple comms controller. Here is the driver you need for the wireless card... This package contains the Broadcom Wireless LAN Drivers that are required to enable the integrated Broadcom Wireless LAN Adapter in supported notebook models that are running a supported operating system. File name: sp48591.exe You will also need this bluetooth driver for that model wireless card... This package contains software and a driver to support the Broadcom 2070 Bluetooth for supported notebook models that are running a supported operating system. The Broadcom 2070 Bluetooth Driver works together with the Broadcom WLAN Driver that supports the NIC in your notebook to enable Bluetooth connections. This package also provides additional Bluetooth Profiles. File name: sp50180.exe

What is the driver for wireless adapter in solaris10

Similar Messages

Maybe you are looking for