What is the easiest way to burn a music cd?

I've been having trouble burning cds on my mac air (10.7.3) with the latest version of iTunes. After I import the cd from the superdrive and insert a blank cd, iTunes closes and I'm taken to the desktop which has the "untitled disc" on it. I have no idea what to do at this point. One tutorial says to select "burn disc" but then I end up with an empty disc. I don't know what to try next. I have burned cds in the past and it made sense. Something has changed. I'm lost. I would appreciate any suggestions which might simplify this process.   Thanks  Bill

Create a playlist, add songs, select it then iTunes menu File > Burn.

Similar Messages

  • What is the easiest way to burn imovies onto DVD's.   I want to burn more than one movie onto DVD as I create.    Can I continue to burn onto the same DVD as the movies are created?

    What is the easiest way to burn my imovies onto DVD's?    I want to burn movies as I create them and then continue to add more movies to the same DVD as the years go by -- until the DVD is full!    Is this possible?

    You might also want to post this in the iMovie forum https://discussions.apple.com/community/ilife/imovie

  • What is the easiest way to burn data from a ext HD to an ext DVD drive?

    I have a Maxtor Touch III with 2 partitions on it. I want to wipe the 2nd partition clean but it has data on it. I just bought a Plextor External DVD-DL drive. So what would be the easiest way to burn the discs? There is about 40Gb worth of data to burn and I have all kinds of backup utilities, (Retrospect Express, Intego's backup, etc....I will admit I am not well versed at using Retrospect, in fact the only way I know how to backup is by doing a Duplicate Backup. So what do you think?

    I personally use Roxio's Toast 7 for all my burning needs, and it's the finest so far (also used DiscBlaze in the past). Click the "DATA" tab, and add whatever files you want to burn, that's it.
    You mentioned you just bought a Plextor external DVD drive, is it the Plextor 716UF (USB/Firewire)? That's the same one i have and it's fantastic.

  • What's the easiest way to retrieve lost music files?

    I was using a file sharing program and I saw that all of my music files were being shown in its share folder, and I did not want to share them. I assumed the files were duplicates and deleted them. When I realized the actual files were being deleted I stopped it, but not before several hundred files were lost. Here is the error message I get when I plug in my iPhone.
    http://i174.photobucket.com/albums/w91/Candyman_8877/Untitled1.png
    It says there is a hundred files missing, but when I count the "!" marks in iTunes, I got to 100 by the letter C, so there is definitely several hundred files missing. I have my machine backed up with time machine, and I also have a faily recent copy of my music folder on an external drive.
    I'm wondering, what is the easiest way (using the fewest clicks) to restore all of my missing music files? I'm trying to avoid searching out and restoring every missing file individually, as there are hundreds and this would be very time consuming.
    Thanks for any help and advice,
    mcfada

    If you are confident the Time Machine backup is current, recover your iTunes folder and all its contents from there.

  • What's the easiest way to manage my music on my iPhone 4S, espeially to delete duplicates

    It is difficult for to manage playlists, smart playlists and restored playlists. What is the easiest way to go through my 7.9 Gigs of music on the iphone and remove duplicates. Is there a way to do this on the phone itself or do I have to go through syncing?

    Hello ihweiner,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    How to find and remove duplicate items in your iTunes library
    http://support.apple.com/kb/ht2905
    Best of luck,
    Mario

  • What is the easiest way to Transfer 32gb music and pics to 64gb micro sd card

    Hello, I am on the low end of technology knowledge. I just bought a 64 gb micro card for my razr maxx. Please share with me the easiest way to trnsfer my data from one card to the other.
    Also FYI, I just came back from a trip to  Italy. Since the JellyBean update my phone has not been able to connect to way to many free wifi spots. I was unable to connect on the cruise ship as well as in at least half the ports visited. Is Verizon or Motorola working on a software fix to help me and many of you with this known issue???
    Thank you

    Thank you Nick. being able to connect to wifi like everyone else would have enhanced my trip. I was able to connect in some spots but few at best. There is nothing that you can do to help me or many others like me. It is up to Motorola and verizon to work on a software fix. I spent hours and hours  trying to get answers and neither company wants to own up to the reality that one of the best phones today is now a mess due to this last Jelly bean update. I have bought a new router for my home and sisters home but  can not buy routers for the may places that my phone will not connect. I wish that you could help me. i only had the phone for three weeks before this happened. I get error messages , poor signal, unable to connect.
    Do you know of any potential fix  being worked on for this known WIFI issue?
    I assume that the info you sent about transferring Pics and video is the same for music?
    Thank you again for your time and support,
    Allan

  • What is the easiest way to backup my iPhoto Library?

    I have a lot of photos in my iphoto library (over 4,000) and I think it's time to back them up onto a DVD (I can't remember how many photos fit on a CD, but I'm pretty sure I will need to burn it to a DVD). What is the easiest way to do it?

    Shannon:
    Besides backing up your entire library folder I recommend you make a backjup copy of the Library6.iPhoto file that's in the iPhoto Library folder. It contains all the information, albums, keywords, comments, etc. for the library and if it gets damaged the library is lost. Not your photos but just all the organization that the iPhoto imparted to the photos. So if you make a backup after every import and after you've done a lot of organizational effort like books, keywords, slideshows, etc., you'll be able to get back to that state if there's a damaged file. The damaged file can occur by a sudden shutdown, bad software update of some sorts.
    Do you Twango?

  • I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

    I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

    What do you not understand?
    You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
    Or
    However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
    you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
    LN

  • What is the easiest way to create and manage very big forms?

    I need to create a form that will contain few hundred questions. Could you please give me some advise on what is the easiest way to do that? I mean for example is it easier to create everything in Word (since it is easier to manage) and than create a form based on that?
    My concern is that when I will have a very big form, containing different kinds of questions and with many scripts, managing it during work will be slow and difficult, for example adding a question in the middle of the form which would require moving half of the questions down which could smash the layout etc.
    What is the best practise for that?
    Thanks in advance

    Try using Table and Rows for this kind of forms. These forms will have the same look throught with a question and and answer section..
    In the future if you want to add a new section, you can simply add rows in between..
    Thanks
    Srini

  • I want to use 1 itunes account but with 3 different iphones 2 for the kids and one for me, what is the easiest way to do that?

    I want to use 1 itunes account but sync 3 different iphones, 2 for the kids and 1 for me.  So I would like to have different programs, songs, apps etc for each phone.  What is the easiest way to do that

    Agreed heather. Also, if you have three users on the same account how do you keep phone calls and messages from going to all three phones?

  • I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?

    I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?

    Following up on this thread,
    I have a new iMac on the way and my current is from 2008, never had a problem but I am sure there are internal issues that I would prefer not to transfer.
    I have no issues other then the slowness in certain programs and that is the main reason to buy a new one.
    Programs like numbers and pages seem to take a longer time to open after I update to Yosemite.
    I only use 272GB of 500 GB, my memory is 4GB and I am upgrading to 8Gb and bought the 4.0 processor.
    Question:
    Is there a way to manually transfer items or would that be a waste of time in that if there are issues they could be anywhere and would transfer anyway?

  • What is the easiest way to transfer a large imovie project from one computer to another in a different location.

    What is the easiest way to transfer an faairly large HD imovie project from one computer to another in a different location. Can you export to drop box? Will the other computer need the exact imovie version?

    OK it depends.
    If you have a finished movie, you can SHARE/EXPORT MOVIE and create your final movie. Then, depending on the size of the finished movie, you can transfer via dropbox or similar service. Ninety minutes is a very long movie for iMovie, but it may work for you. I would suggest 720P to keep the size down.
    If you need to transfer the entire iMovie Project so it can be edited in iMovie at the other end, then you need to transfer the project and event assets to an external hard drive and get the hard drive to the other location.
    Directions are here. Follow the directions for 1) Moving or copying Project to external drive. Then 2) Consolidate Media.
    https://discussions.apple.com/docs/DOC-4141

  • What is the easiest way to create alias email addresses in exchange 2013?

    For example my official domain is [email protected]
    Within my company i want to make it look like certain departments are sending from bicycles.com skateboards.com
    and skooters.com and receive to those addresses even though the emails are really going through the
    [email protected] domain. but it appears to be coming from three other domains.
    appearance is everything. What is the easiest way to accomplish this.
    Step by step with examples if possible. I am not well versed in exchange server 2013 yet.
    Droid Hacker

    In Exchange 2013 you can use the ECP to add additional email addresses to mailboxes. In order for a mailbox to send using an address, that address needs to be set as the reply address. One mailbox cannot send as multiple addresses. Doing that would require
    a mailbox for each address. To set a new primary address on a mailbox log into the ECP and choose mailboxes under the recipients option on the left. Then search for the mailbox you want to add the address to and click the edit symbol. Navigate to the
    Email Address tab on the left. To set a new primary address you will likely need uncheck the box for "Automatically update email addresses based on the email address policy applied to this recipient". Then click the plus button, enter the new address,
    and check the box for "Make this the reply address"
    Before you do this you should ensure that the proper MS records exist for these other domains, and that they are properly configured for mail flow. Once you set this as the reply address for a mailbox, that is the address external users will use for replies.

  • What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or partitioning?

    What's the easiest way to add storage to a mac mini. (1TB hard drive but only 32G of real storage). External device, internal or is there some way to partition? I tried doing so but received a message that there wasn't enough free space to partition. Seems like a 1TB drive should have more storage than my Ipad

    Its worth confirming what free space you have on your drive: 
    go to:   Apple Menu > About this Mac >  More Info > Storage
    The bar chart shows how much free space there is on the drive:
    Please realise that partitioning does not create extra space so this wont help you.
    If your free space is less than 20 % you should get extra storage with an external USB or Firewire drive, any make or model will work.

  • What's the easiest way to move app data and data structures to a server?

    Hi guys,
    I've been developing my app locally with Apex 4.2 and Oracle 11g XE on Windows 7. It's getting close to the time to move the app to an Oracle Apex server. I imagine Export/Import is the way to move the app. But what about the app tables and data (those tables/data like "customer" and "account" created specifically for the app)? I've been using a data modeling tool, so I can run a DDL script to create the data structures on the server. What is the easiest way to move the app data to the server? Is there a way to move both structures and data in one process?
    Thanks,
    Kim

    There's probably another way to get here, but, in SQL Developer, on the tree navigation, expand the objects down to your table, right click, then click EXPORT.. there you will see all the options. This is a tedious process and it sucks IMO, but yeah, it works. It sucks mostly because 1) it's one table at a time, 2) if your data model is robust and has constraints, and sequences and triggers, then you'll have to disable them all for the insert, and hope that you can re-enable constraints, etc without a glitch (good luck, unless you have only a handful of tables)
    I prefer using the oracle command line EXP to export an entire schema, then on the target server I use IMP to import the schema. That way, it's near exact. This makes life messy if you develop more than one application in a single schema, and I've felt that pain -- however -- it's a whole lot easier to drop tables and other objects than it is to create them! (thus, even if the process of EXP/IMP moved more than you wanted to "move".. just blow away what you don't want on the target after the fact..)
    You could use oracle's datapump method too.
    Alternatively, what can be done, IF you have access to both servers from your SQL developer instance (or if you can tnsping them both already from the command line, you can use SQL*PLUS), is run a script that will identify your apex apps' objects (usually by prefix to object names, like EBA_PROJ_%, etc) and do all the manual work for you. I've created a script that does exactly this so that I can move data from dev to prod servers over a dblink. It's tricky because of the order that must be executed to disable constraints and then re-enable them, and of course, trickier if you don't consistently prefix ALL of your "application objects"... (tables, views, triggers, sequences, functions, procs, indexes, etc)

Maybe you are looking for