What is the equation for a Low-Sidelobe Window Function (in Power Spectrum VI)?

I am trying to find out what is the equation for the Low Sidelobe Window which is mentioned in the Power Spectrum VI. Hanning second sidelobe is around -32dB of the first. What is that for Low Sidelobe?

The CWT is not equivalent to the discrete dyadic wavelet transform. In theory, the CWT can compute the wavelet coefficient at any positive real scale and any real shift, while the discrete dyadic wavelet transform only includes the dyadic scales (2,4,8,16...). So the formula used to describe the CWT can be referred to the equation in pp.80 in S. Mallat's book.
In SPT's implementation, the time interval controls the shift in number of samples. The scales indicate the wavelet coefficients at integer scales 1,2,3,...,"scales" are contained in the output scalogram.
NISH DSP
Medical ultrasound and signal processing

Similar Messages

What is the equation for Time Machine required space?

Once again Time Machine says it has run out of room to do my backup. I guess I just don't understand the equation for figuring this out.
These are my specs:
Disks being backed up - 2 drives
          Internal Drive - 640gb, 482gb in use
          External Drive - 500gb, 105gb in use
     587gb total data in use
Time Machine disk - 1TB, 715gb in use, 284gb available, asking for 303gb
TM wants space that is more than half of my total data in use. I have one (old) 2gb file, all others are 99mb and smaller, mostly much smaller.
Why isn't TM removing older backup files to make room for the latest? Why does it think it needs a block of 303gb when the new files it needs to back up are all in the sub 10mb range?
On the surface it seems like TM is using disk sizes to do it's caluclations instead of file size.
What is the equation it uses to figure this out? I am puzzled...

jlmcvay wrote:
Starting pre-backup thinning: 286.19 GB requested (including padding), 265.05 GB available
That's your main problem; wanting to back up about 238 GB (plus 20%). Curiously, that's a bit less than the previous messages.
See what's shown for Estimated size of full backup under the exclusions box in Time Machine Preferences > Options. According to the figures in your first post, it should be about 587 GB. If it's considerably larger, then there are two possibilities:
Something else is connected, and Time Machine is trying to back it up.
There's a directory problem on one of the disks being backed-up, so Time Machine thinks it's much larger. If so, try verifying your internal HD, and repairing the external, per #A4 in Time Machine - Troubleshooting.
But if the estimate is reasonably close, then something very large has changed. See #D4 in Time Machine - Troubleshooting for some of the common culprits. Unfortunately, there's no way to tell in advance what it is; you can only see that after a backup completes.
If nothing there helps, try excluding the external HD and trying again (per #10 in Time Machine - Frequently Asked Questions) -- that should tell us whether the problem is on the internal or the external. Then we can try to narrow it down.
Seems like there is a problem with the Event store UUIDs for my internal drive.
Not a major one. That message means that Time Machine isn't sure that the previous backup was completed normally (which it obviously didn't). When that happens, Time Machine can't use the Event store, but has to do a "deep traversal" to compare everything on the drive to the backups to figure out what's changed and needs to be backed-up. That takes a while, of course, and means your backup will take considerably longer than usual.
I commonly have iPhoto open all the time. If TM cannot back up iPhoto while it open that would explain why it needs to backup a lot of data.
That's a possible explanation, but 238 GB is a lot of photos. How large is your entire iPhoto Library?
Time Machine can sometimes back the iPhoto Library up when iPhoto is open -- it seems to depend on just what you've been doing. So it's fairly unusual for it to be missed for very long. (It ought to send a message after a certain time, but it doesn't.)
If excluding the external HD doesn't turn up a clue, try excluding your Pictures folder.

What is the number for Verizon Wireless Corporate Customer Service Complaint for CA

My Complaint: I have been a Verizon Wireless customer for approx 20 years. I called customer service to seek an early upgrade for my daughter's phone. She is away in college and her phone is malfunctioning. She is eligible for an upgrade in approx 6 weeks so I did not want to spend the money on a replacement phone when since we were planning on updating to something newer. The customer service rep to me they could not do the early upgrade an to call back in a few weeks. After explaining this was unacceptable (I do not like the idea of a young female being out of state and away from home with no reliable means of communication), she places me on hold to later return with the only offer of I must purchase a new device through her ( over the phone) which will be shipped to me, the phone was priced $100.00 more than the online price (they will not price match), plus i must pay $30.00 upgrade fee, $35.00 activation fee and taxes on the retail price of the phone. I am upset and disappointed with the quality of service provided by Verizon being a 20 year customer. If not for the seriousness and urgency of this matter, i would not have asked for an early upgrade. It is times such as these that you get to see how much of a "valued customer" you really are. I guess you are valued as long as you pay your bill and continually purchase their products. I would like to speak with someone from Verizon's corporate or customer relations department. As of now I am really considering changing my service to a different provider. I have multiple accounts with Verizon and i will canx each after the current contract committment expire (starting with my daughter's phone which expires in 6 weeks) In the meantime I will go purchase her a new phone with someone else and take comfort knowing she will have reliable communication.

I started with them in 1985. It has been wonderful service but very expensive. They seem to operate on day of deposit day of withdrawal. That means that I have no benefits nothing beyond the normal customer if I don't pay my bill they shut me off. That's why I have switch to another provider and I have better service lower cost and better phones. you can't beat other providers I mean it. Please don't expect more from verizon other than a "pay me more money and I'll do what you want" because it's all about money. Read the transcripts from current Verizon employees all over the internet. The company is going down and they're taking customers with them.
msvat <[email protected]> wrote:
msvat created the discussion
"What is the number for Verizon Wireless Corporate Customer Service Complaint for CA"
To view the discussion, visit: https://community.verizonwireless.com/message/1113982#1113982
>

What are the wildcards for FILE_MASK in FM EPS_GET_DIRECTORY_LISTING

The wildcard for exactly 1 character is '?'.
example: with mask ????????.STA     , I get the following files:
BWMDAACW.STA
BWMDAADW.STA
BWMDAAEW.STA
BWMDAAFW.STA
BWMDAAGW.STA
(all files ending with .STA, with 8 characters before .STA)
But what is the wildcard for 'any character' ?
I tried with *.STA     , but the result is
test1
test2
test3
test4
y5c01
(all the filenames with exactly 5 characters)
with *STA, the result is
IBAN
PBCL
rfbi
stxh
stxl
(all the filenames with exactly 4 characters)
(the result is the same with *123 or *XYZ !!!)
with BW*, the result is
BWMDAACW.STA
BWMDAADW.STA
BWMDAAEW.STA
BWMDAAFW.STA
BWMDAAGW.STA
as expected, but * seems the right wild character for 'any character' only at the end of the mask; it seems not work as expected when it is not the last character of the mask.
It seems very strange! What are the rules for wildcards ? (I'm in 4.7)
thanks in advance

CONSTANTS DAYS1980     TYPE I VALUE 3652.
DATA: linelength TYPE i VALUE 0.
DATA: linelength1 TYPE i VALUE 0.
DATA: text TYPE string.
DATA: DLIST    LIKE EPSFILI OCCURS 0 WITH HEADER LINE,
      DPATH    LIKE EPSF-EPSDIRNAM,
      PFILE    LIKE EPSF-EPSFILNAM,
      MDATE    LIKE SY-DATUM,
      MTIME    LIKE SY-UZEIT,
      POINT_IN_TIME TYPE I.
DATA: BEGIN OF FATTR OCCURS 0,
          FILE_NAME LIKE EPSF-EPSFILNAM,
          FILE_SIZE LIKE EPSF-EPSFILSIZ,
          FILE_OWNER LIKE EPSF-EPSFILOWN,
          FILE_MODE LIKE EPSF-EPSFILMOD,
          FILE_TYPE LIKE EPSF-EPSFILTYP,
          FILE_MTIME(12),
      END OF FATTR.
PARAMETER P_PATH(50) TYPE C DEFAULT '/TMP' LOWER CASE.
PARAMETER P_FILE(50) TYPE C DEFAULT ' ' LOWER CASE.
DPATH = P_PATH.
PFILE = P_FILE.
CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
     EXPORTING
          DIR_NAME               = DPATH
*          FILE_MASK              = PFILE
     TABLES
          DIR_LIST               = DLIST
     EXCEPTIONS
          INVALID_EPS_SUBDIR     = 1
          SAPGPARAM_FAILED       = 2
          BUILD_DIRECTORY_FAILED = 3
          NO_AUTHORIZATION       = 4
          READ_DIRECTORY_FAILED = 5
          TOO_MANY_READ_ERRORS   = 6
          EMPTY_DIRECTORY_LIST   = 7
          OTHERS                 = 8.
break developer.
IF SY-SUBRC EQ 0.
LOOP AT DLIST.
linelength = STRLEN( DLIST-NAME ).
    linelength = linelength - 3.
linelength1 = STRLEN( P_FILE ).
    linelength1 = linelength1 - 3.
if DLIST-NAME+linelength(3) = P_FILE+linelength1(3).
    CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
         EXPORTING
              FILE_NAME              = DLIST-NAME
              DIR_NAME               = DPATH
         IMPORTING
              FILE_SIZE              = FATTR-FILE_SIZE
              FILE_OWNER             = FATTR-FILE_OWNER
              FILE_MODE              = FATTR-FILE_MODE
              FILE_TYPE              = FATTR-FILE_TYPE
              FILE_MTIME             = FATTR-FILE_MTIME
         EXCEPTIONS
              READ_DIRECTORY_FAILED = 1
              READ_ATTRIBUTES_FAILED = 2
              OTHERS                 = 3.
    IF SY-SUBRC EQ 0.
      FATTR-FILE_NAME = DLIST-NAME.
      APPEND FATTR.
    ENDIF.
    endif.
ENDLOOP.
SORT FATTR BY FILE_NAME.
LOOP AT FATTR.
    POINT_IN_TIME = FATTR-FILE_MTIME.
    CALL FUNCTION 'POINT_IN_TIME_CONVERT'
         EXPORTING
              POINT_IN_TIME = POINT_IN_TIME
         IMPORTING
              DATE          = MDATE
              TIME          = MTIME
         EXCEPTIONS
              OTHERS        = 1.
    SUBTRACT DAYS1980 FROM MDATE.
    WRITE: / FATTR-FILE_NAME,
             FATTR-FILE_SIZE,
             MDATE,
             MTIME.
ENDLOOP.
ENDIF.
Edited by: kk.adhvaryu on Sep 25, 2010 12:08 PM

What is the condition for First write statement in reports?

What is the condition for First write statement in reports?

In
TOP-OF-PAGE & START-OF-SELECTION.
U have to write what ever u want to dispaly.
Top-of-page will trigger first and write the statements.
SAmple report program for reference.
REPORT ztemplate
          NO STANDARD PAGE HEADING
          LINE-SIZE 130
          LINE-COUNT 65
          MESSAGE-ID zm.
* The Data Declarations
TABLES:    mara." General Material Data.
* Type Declarations:
TYPES : BEGIN OF ty_mara,
          cb(1),
          matnr LIKE mara-matnr,
          mtart LIKE mara-mtart,
          matkl LIKE mara-matkl,
         END OF ty_mara.
* Internal Tables:
* The following structure type must be defined in the data dictionary
DATA : i_output TYPE ty_mara OCCURS 0 WITH HEADER LINE.
DATA: lines TYPE i, free TYPE i.
* The Selection Screen Definition
SELECTION-SCREEN BEGIN OF BLOCK b_main WITH FRAME TITLE text-b01.
*SELECTION-SCREEN skip.
SELECT-OPTIONS: s_matnr FOR mara-matnr.                  "Material No
*PARAMETERS:     P_XXXXX like XXXX-XXXXX.                   "Description
*PARAMETERS:     CB_XXXX as checkbox.                       "Description
*PARAMETERS:     RB_XXXY radiobutton group XXX default 'X'. "Description
*PARAMETERS:     RB_XXXZ radiobutton group XXX.             "Description
*SELECTION-SCREEN COMMENT fmt name.
SELECTION-SCREEN END OF BLOCK b_main.
*SELECTION-SCREEN ULINE.
*eject
* INITIALIZATION
INITIALIZATION.
* AT SELECTION-SCREEN
AT SELECTION-SCREEN.
*Validate material no details
IF NOT s_matnr[] IS INITIAL.
LOOP AT s_matnr.
IF NOT s_matnr-low IS INITIAL.
SELECT SINGLE matnr INTO v_matnr
         FROM mara
         WHERE matnr = s_matnr-low.
IF sy-subrc NE 0.
    MESSAGE i128.
    LEAVE LIST-PROCESSING.
ENDIF.
ENDIF.
IF NOT s_matnr-high IS INITIAL.
SELECT SINGLE matnr INTO v_matnr
         FROM mara
         WHERE matnr = s_matnr-high.
IF sy-subrc NE 0.
    MESSAGE i128.
    LEAVE LIST-PROCESSING.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
* START-OF-SELECTION
START-OF-SELECTION.
   REFRESH: i_output.
CLEAR : i_output.
SELECT matnr
         mtart
         matkl
         INTO TABLE i_output
         FROM mara
         WHERE mara~matnr IN s_matnr.
IF sy-subrc NE 0.
    MESSAGE i000 WITH text-002.
    " No records found for selected criteria
        leave list-processing.
ENDIF.
IF NOT i_output[] IS INITIAL.
    LOOP AT i_output INTO wa_output.
      WRITE:/001 wa_output-cb AS checkbox,
             003 wa_output-matnr,
             015 wa_output-mtart,
             024 wa_output-matkl.
      CLEAR wa_output.
    ENDLOOP.
ENDIF.
* END-OF-SELECTION
END-OF-SELECTION.
lines = sy-linno - 1.
SET PF-STATUS 'ZSTATUS'.
AT USER-COMMAND.
      wa_output-cb = space.
      SET PF-STATUS 'ZSTATUS' EXCLUDING 'SAVE'.
      DO lines TIMES.
        READ LINE sy-index FIELD VALUE wa_output-cb.
          IF wa_output-cb = 'X'.
        MODIFY i_output FROM wa_output INDEX sy-tabix TRANSPORTING cb.
        ENDIF.
      ENDDO.
CASE sy-ucomm.
WHEN 'SAVE'.
      DELETE i_output WHERE cb = 'X'.
WHEN 'BACK'.
LEAVE SCREEN.
ENDCASE.
* TOP-OF-PAGE.
TOP-OF-PAGE.
ULINE.
FORMAT INTENSIFIED OFF.
FORMAT COLOR COL_HEADING.
WRITE:/001 'CB' ,
         003 'Material No',
         015 'Mat type',
         024 'Mat group'.
FORMAT COLOR OFF.
FORMAT INTENSIFIED ON.
ULINE.

What is the presets for creating NTSC_ Widescreen DVDs?

I have footage that is 1920x1080/60p and 1920x1080/60i that I will combine into one project to edit. First off, what project setting should I be using? I will be creating Blu-ray and DVDs. The Blu-ray quality looks great. BUT the DVD quality is not good at all. I understand I will be getting loss of quality creating DVDs, but not that much. When creating DVDs what is the preset for NTSC_ Widescreen_Dolby DVD? When saving a file to computer - NTSC_ Widescreen, it has an advanced option where you can change the settings to get better quality. I am using Elements 12. Will this advanced feature be added to creating DVDs in the next version?

Erma
Thanks for the reply.
12.1 Update was released by Adobe for Premiere Elements 12 around March 2014. It's obvious fix is related to the text styles issue specific to the Expert workspace. There are supposed be other perks.
http://www.atr935.blogspot.com/2014/03/pe12-update-121-released.html
This update is free and is accessed only from within the opened project, using Help Menu/Update.
If history repeats itself, Adobe should be releasing a new version of Premiere Elements at the end of September 2014. No one but Adobe knows the feature set, and that type of information is released by it only at the moment of release of the new version. In the past, after the new version release, Adobe has announced its policy with regard to going to the new version from a recent purchase of the version that the new version replaces.
For a mixed timeline, I want to edit only one time and save to Blu-ray and
DVD. Which project preset Full HD1080i30 or AVCHD 1080p60 would be best?
DVD-VIDEO and the Field Order of interlaced frame rates are the concern. Do a mini test run to determine which works for you. DVD-VIDEO uses Field Order = Lower Field First. Your 1080i30 does not. It uses Upper Field First. And, there is my moment of pause. Contrast.... If the destination is Blu-ray, your interlaced source is going from and to an Upper Field First.
The project preset should be set to match the properties of the source media. There again the matter of priorities.
But, when it comes to export and you have a choice of 1440 x 1080 HD Anamorphic 16:9 vs 1920 x 1080 16:9, go with the 1920 x 1080 16:9 which will not depend on a 16:9 flag to stretch the video to 1920 x 1080 16:9. Some players have problems with the 16:9 flag to stretch the 1440 x 1080 4:3 to 1920 x 1080 16:9.
Not sure what you mean by
Do you know what is the preset for NTSC_ Widescreen_Dolby DVD?
When you burn your Timeline to DVD-VIDEO widescreen on a DVD disc, NTSC_Widescreen_Dolby DVD is the preset that you select in the burn dialog.
That will give you your Timeline in NTSC DVD-VIDEO format on DVD disc (720 x 480 16:9 @ 29.97 interlaced frames per second). In this case, the 16:9 flag stretches the video to about 856 x 480 for display after encoding. You cannot customize that preset.
Not sure where you are going on this
NTSC_Widescreen for saving to computer has advanced options, where you can
change quality 3 up to 5? Interlaced or progressive?. CBR? lower/higher
VBR, 1 pass or 2 pass?
No matter what file you send through the Premiere Elements Publish+Share burn to with the NTSC_Widescreen_Dolby DVD setting, you are always going to get the same results (export properties) of the present
720 x 480 16:9 @ 29.97 interlaced frames per second). In this case, the 16:9 flag stretches the video to about 856 x 480 for display after encoding.
If you want to export your Timeline content to a file saved to the computer hard drive, you can use the Publish+Share/Computer/ Advanced settings. But, then you need to decide on your playback opportunities related to the specifications of the player.
Please review and then we can work through the details.
Thanks.
ATR

What is the Tcodes for Uploading of data using BDC & CATT

PP members:
I was going through the cutover activities , and what I understood is we transfer all the legacy system data into SAP before going live
The data upload follows certain steps (depends on the organizational design load strategies)
First we upload all the master data ( material master, BOM, W/C's & Routings)
Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as materials of the previous stage and necessary adjustments shall be made after cutover day
At this point, I could not able to understand what does the author mean materials of the previous stage
Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
Is it a must to use only LSMW tool to upload master data or any other upload tools are fine
Lastly,. I am not sure about the Tcode of CATT & BDC
Summary of the questions:
1.What does the author mean material of previous stage, for WIP materials during cutover activities
2. Is it mandatory to use only LSMW tool for uploading for master data
3. What are the Tcodes for upload tools CATT & BDC ?
Thanks for your time
Suren R

Dear,
1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM.

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10?

Hi Guys,
What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10?
I have to write an AP Invoice Aging Report in Discoverer to show all unpaid invoices that have been transferred into GL... Business wants it to match one-to-one with the AP Trial Balance standard report...
Business wants to run the report for any date in a past...
The report has two parameters:
As Of Date - the same as As of Date for the AP Trial Report
Trial Balance Run Date - the date when Trial Balance was run...
Conditions are:
TRUNC(Invoice Date) <=TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
TRUNC(NVL(Payment Date,'01-JAN-5000')) > TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
TRUNC(Invoice Creation Date) <= TRUNC(NVL(TO_DATE(:Trial Balance Run Date),SYSDATE))
Distr Accounting Date <= TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
NVL(Distr Creation Date,Invoice Creation Date) <= TRUNC(NVL(TO_DATE(:Trial Balance Run Date),SYSDATE))
Show_Flag = 'YES', where:
Show_Flag = CASE WHEN ( NVL(Cancelled Date,'01-JAN-1901') > NVL(:As Of Date,SYSDATE) AND NVL(Inv Amount Aud,0) = 0 ) THEN 'YES' ELSE ( CASE WHEN NVL(Inv Amount Aud,0) = 0 THEN 'NO' ELSE 'YES' END ) END
There is a difference between the logic of my report, and the logic of AP Trial Balance...
Could you please advise what I'm missing?
Thanks,
Iana

What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10? You can get the code by opening the report in Reports Builder and get the query.
Or, enable trace/debug as per (FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]).
Thanks,
Hussein

In Address Book, Lion, what are the checkmarks for when you Edit a Contact?

In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?

I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using.

What is the procedure for a hard boot of my iPod touch 4th generation without itunes, and without computer, and without iPod data screen.?

What is the procedure for a hard boot of my iPod touch 4th generation
without iTunes, and without computer, and without iPod data screen?
6 months after purchase I updated my iPod touch as recommend by iTunes.
It has not worked since that day. It frozen (disabled) with a "connect to
iTunes" icon displayed...that is the only thing it does. itunes does not
recognize the iPod. My Windows7 computer recognizes an Apple device.
Other computers recognize the devise but if iTunes resided on that
computer it did not recognize the iPod
I suffered a setback with deep depression and am just now getting out of it enough to do something. The depression prohibited me from taking action.
I have done every procedure recommended from Apple help and external
sources. I did this thoroughly with help for other owners and IT experts,
Apple employees etc etc. I and associates have perform reboots utilizing a
number procedure using only button on the iPod. These were unsuccessful
also have performed.
Please do not ask me to do the usual.
Online I saw a process using the buttons on the iPod to completely
reformat
the iPod. It was NOT the hold buttons for 10 sec let go of one wait 8 sec
etc. I can not find the process now...a friend showed it to me in passing
I have lost contact with him. This is the procedure, I believe, that with
enable me to update and use the iPod.

You need an internet connection and likely a computer with iTunes but an iPhone, iPad or iPod touch with the FindMy iPhone App may work by:
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Otherwise
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Yo may have to go to an Apple store or a friend's house with an internet connection and iTunes.

TS1702 I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just give me a blank page.!!!! what is the solution for this.!!!!

I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just gives me a blank page.!!!! I wouldn't able to know what app has to be updated, untill and unless i get check for each every app on the app store installed on my iphone... what is the solution for this.!!!! can any1 one help me out.!!!!

Cc2528 wrote:
The iTunes Store on my iPad is set up with all my music already. And at the very bottom it shows my apple Id username. The only place it shows the previous owners id is in the App Store...
You can probably change the ID in the "iTunes and App stores" settings on the iPad....click on the wrong account ID , select sign out, then log in with your own ID, I have not done this but I think it works.....
but I would be more inclined to to the factory reset and start afresh.

What is the alternative for DisplayMemberPath="Value" for Windows Store applications?

I think there is a bug with Windows Store Applications when it comes to using DisplayMemberPath="Value".
Here is my code
<ComboBox Height="40" VerticalAlignment="Stretch" SelectedValuePath="Key" DisplayMemberPath="Value" x:Name="comboBox1" FontSize="25"/>
var source = new Dictionary<string, double>();
source.Add("Item1", 0.4);
source.Add("Item2", 0.3);
source.Add("Item3", 0.1);
source.Add("Item4", 0.1);
var formateDSource = new Dictionary<string, string>();
foreach (var item in source)
formateDSource.Add(string.Format("[{0}, {1}]", item.Key, item.Value), item.Key);
comboBox1.ItemsSource = source;
If you use this code in WPF in works perfectly. However if you use this code in a Windows Store Application then the Combo Box is empty and an error is thrown. So is there an alternative way to do this in Windows Store Applications and have I unearthed a
bug? Because I have researched the Web for days and found no solution to this.*please do not comment unless you have tried my code as a Windows Store App not a WPF in Visual Studios. Can Someone post an example based on my code that works in Windows Store
Apps please because this is terrible.
Thanks

It looks like you got an answer on SO:
http://stackoverflow.com/questions/29817124/what-is-the-alternative-for-displaymemberpath-value-for-windows-store-applicat
This does look like a bug.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

SSAS Tabular in DirectQuery - What are the workarounds for formula limitations?

Hello,
I need to create an SSAS Tabular model against the database of a live, real-time, line of business transactional system (i.e. a CRM).
The business requirement behind it is that we need to create some complex reports against live data, and our DW is only updated daily.
This live model will however be partitioned with a time-variance limitation (e.g. only records which are XX old can be returned).
Now here is the challenge. Since I am querying live data, then I believe the model must be configured in DirectQuery model. Am I right?
The issue is that DirectQuery mode is full of formula limitations. So my concern is, if I need a calculated column or measure that I cannot make it work due to DirectQuery limitations, then what are the alternatives?
Remember that the data source is from a live system, so it is not like I can create columns and measures in the underlying relational database.
Please advise.
Regards,
P.

Hi pmdci,
According to your description, you want to use some functions in calculated measure which are not supported in DirectQuery mode. Right?
In Analysis Services Tabular, since DirectQuery has the real time access and scalability, this comes with a price of restrictions on a number of DAX functions and missing Calculated Column feature. Generally the workaround for these scenarios
is replacing those functions with other functions which are supported in DirectQuery mode, or create columns in the data source. However, as you said, your environment is not possible to create columns in the database. And a lot of those limited
function are not replaceable, like time intelligence functions. So actually, there's no really effective workaround currently.
For you requirement, I suggest you submit Microsoft a feature request
at https://connect.microsoft.com/SQLServer
so that we can try to modify and expand the product features based on your needs.
Best Regards,
Simon Hou
TechNet Community Support

What is the equation for a Low-Sidelo​be Window Function (in Power Spectrum VI)?

Similar Messages

Maybe you are looking for

What is the equation for a Low-Sidelobe Window Function (in Power Spectrum VI)?