What is the error code 2147220969 mean? how to rectify it?

I'm using NI labview 2011 after connecting IEEE 1394 camera with image grabber h/w and clicling acquire image in NI Vision window the camera is detected on moving to further steps a dalog appears showing error code 2147220969.

Hello Subhash,
Thanks for posting here!
You might want to see this link:
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/loose-internet-connection-every-hour-matches-when/9e4c4984-263a-4d33-bd6c-b6335e5a0197
Hope this helps you identifying and resolving the issue.
Let me know if you have any further queries.
Regards,
Sadiqh

Similar Messages

  • What does the error code 0x80090318 mean connecting to IStore?

    What does the error code 0x80090318 mean connecting to IStore?

    I think the problem was using a WPA2 network rather than a WPA network. When I tried connecting to a WPA network, everything went fine.

  • TS2446 What's the error code 1009 means ?

    What's the error code 1009 means ?

    What country are you in, and are you trying to use another country's store ?

  • TS3297 What is the error code 6003 means

    What is the error code 6003 means

    This Discussion may be able to offer some enlightenment...
    https://discussions.apple.com/message/11655160#11655160

  • What does the error code -41004 mean in print report.vi?

    I am getting the following error in the Print report.vi.
    Error Code : -41004
    Error Scource : Print Report.viPrint_VI_Image.vi

    Hi
    I have attached the main vi which is using the NI-Print Report.vi.
    I have also attached the image of the error desciption I got.
    Attachments:
    OPG_Print_to_PDF.llb ‏94 KB
    error.bmp ‏273 KB

  • What is the error code mean? And how to solve it ?Please give your answer. Thanks

    What is the error code  mean? And how to solve it ？Please give your answer. Thanks
    Attachments:
    QQ截图20140403134626.png ‏59 KB

    duplicate post
    LabVIEW Champion . Do more with less code and in less time .

  • Quickly!Quickly!Quickly!What is the error code mean? And how to solve it ?Please give your answer. Thanks

    What is the error code mean? Why is there an error?And how to solve it ？Please give your answer. Thanks！                                               
    ——1110340026
    Attachments:
    QQ图片20140403140655.jpg ‏108 KB

    Sannieboyyyy wrote:
    Could be me, but your VI is not working properly on the english version of LV. Can I suggest you to try programming in English in the future?
    Yes, it's you. The VI is working just fine, except for some cosmetic issues with the labeling. I don't think is is a valid suggestion to force somebody to program in a specific language, especially since LabVIEW supports all these languages.
    Here are the problems with the VI:
    If you don't want an amplitude of zero, you need to set the amplitude control to a nonzero value before running. Simple as that!. (You could also set the input range for the amplitude control to exclude zero or use a case structure to skip certain code if the amplitude is zero).
    You could also wire the error output to an indicator so it simply displays the errors, but keeps running.
    Your while loop is currently useless. You can delete it and the program function will not change. Use a stop button at the loop condition.
    Your while loop needs some timing so it runs at a reasonable rate. Either add a small wait or configure the signal generation to "simulate acquisition timing" instead of "run as fast as possible".
    LabVIEW Champion . Do more with less code and in less time .

  • HT201250 what does reported "error code 6584" mean ?

    What does reported "error code 6584" mean ? when trying to get into my time machine back up.

    First, I suggest you make another full backup to a locally-attached external hard drive. You should do that anyway. One backup isn't enough to be safe, and backing up over a network is less reliable than backing up locally. Then try each of the following steps that you haven't already taken.
    1. Restart the backup device. You can do that by disconnecting and reconnecting the power cord.
    2. Open the Time Machine pane in System Preferences and check that the device is selected as a destination. If it isn't, select it and try again.
    3. Hold down the option key and select Verify Backups from the TM menu in the menu bar (not the Dock icon.) This operation may take a long time. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
    4. Erase the backup device. With a Time Capsule, you do that from within the AirPort Utility application; see its built-in help for details. All backups on the device will be lost, so don't do this until you've backed up to another device. After erasing, select the device again as a backup destination in the TM preference pane. The first backup should be made over a wired connection, if possible.

  • Hai when my iphone 5 connet to my windows 7 error massege is blink on my system the error code is oxe8000084 how to solve my problem

    hai when my iphone 5 connet to my windows 7 error massege is blink on my system the error code is oxe8000084 how to solve my problem

    https://discussions.apple.com/message/22296149#22296149
    more from the google I did
    iphone error 21

  • HT1491 Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

    Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

    Hi Velvalee,
    While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
    Cheers!
    - Ari

  • What is the error code -5010D

    what is the error code -5010D

    A little Googling seems to indicate a hard drive problem, which sounds right given the symptoms you're seeing. Make sure you've gotten a good backup of everything. The good news is hard drives are cheap and easy to install. You can look up the procedure for your machine at ifixit.com.

  • What is the error code:0x80020042?

    what is the error code:0x80020042?

    This Discussion may be able to offer some enlightenment...
    https://discussions.apple.com/message/11655160#11655160

  • What's the error code: 1661 during the IOS5 restore?

    what's the error code: 1661 during the IOS5 restore?

    What country are you in, and are you trying to use another country's store ?

  • HT201210 what is the error code 1051 im trying to fix the iphone 3G it keeps telling me to conect to itunes it starts to install the gives me the error code

    what is the error code 1051 im trying to fix the iphone 3G it keeps telling me to conect to itunes it starts to install the gives me the error code

    I suspect you meant 1015, not 1051. You have a jailbroken phone. you can't get help here.

  • HT1369 what is the error code mean -42220

    Everytime i start up itunes i get the error code -42220
    Also i cant seem to download music to my ipod classic?

    duplicate post
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for