What is the exact address I send my phone to for repairs?

what is the exact address I send my phone to for repairs?

That is not how it works.
In the U.S. for example, if an exchange under warranty is approved over the phone, AppleCare ships the replacement iPhone and the box the replacement iPhone is shipped with is used to send AppleCare the iPhone being exchanged under warranty.
No one arbitrarily ships their iPhone to Apple for repair. They won't accept the shipment for starters and an iPhone will be exchanged under warranty if needed, not repaired.

Similar Messages

HT2458 Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you

Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you

You received incorrect information from AT&T. You can indeed access your voicemail without your iPhone.
Call AT&T at (800) 331-0500 (assuming you're in the U.S.). This is a 24 hour a day, 7 day a week number. Ask them how to access your voicemail. Normally, you would just do this by dialing your number from another phone, typing "*" once your voicemail recording starts, and entering your password. You don't know your password, so it's probably the last four digits of your phone number or perhaps the seven - or ten-digit phone number. Let the AT&T person tell you.

Why won't apple let me send my phone in for repair?

My phone is unfortunately water damaged so I want to send it to get repaired.
After filling in the online form on the Apple support page a few days ago I realised I didn't have the £185 it quoted for the repair so I thought I'd leave it until I'd got paid to send for repair.
Now 3 days later, when I fill in the form online to send my phone for repair, once I get to the 'detailed quote and payment' tab, it redirects me to a page that says 'We're unable to complete the repair. Please try again or choose another solution.'
Does anyone have any idea why it seemed to be working fine a few days ago but now just displays this message? I've filled the form in so many times that I feel like I'm going crazy.
I would take it into an Apple Store but there isn't one locally.
Any advice?

If, as you said in your first post, there isn't an Apple Store you can get to, call Apple support and talk to them. As Tim suggested, it may be due to your having a repair order open already. If you call Apple, they should be able to get you set up.
Regards.

HT1438 I just put in a request to send in my ipod for repairs, what is the actual address I send my iPod to?

Just need an address to send my ipod out too. I filled out the online form to send in my ipod, paid the bill with my visa, now I need to know "where" to send it. Didn't see an address

Apple should contact you for a shipping address and of how to ship. Contact Apple if the do not send you the information. Make sure you included the case/repair number if you contact them.
Contacting Apple for support and service

What is the exact release of java 1.4.1 for e3.3

There are several releases of java RTE 1.4.1 (01 through 07). Do all
releases work with e3.3 in the HP-UX11i environment? Is there a specific
version(s) to avoid? So far, I've only seen references to 1.4.1 in the
documentation. Thanks!

Less than 1 1/5 GB is normal. It does grow with time.
What is the Other on my iPhone and How to Remove It

What's the best way to send uncommon sized images for printing?

One of the things I need to do occasionally is print an uncommon sized image. For example, I may crop part of an image as a 2x3 to fit in an odd picture frame, such as a Chrstimas ornament. However, most places I print (e.g. CVS) only print common sizes. In the past I've used Elements to create a blank new image in a common size and pasted my crop into it (which is a little tricky because you have to make sure the new image and the crop have the same resolution), but I'd like to be able to do this directly in Lightroom. What would be the best way to do this?

1. Crop the image to the aspect ratio you want. If you wish to retain the cropped version for future use, make a Virtual Copy of it.
2. In the Print module set the page size to the size you will be ordering from the lab.
3. Make the cell dimensions the size you want the image to be. Set the margin sizes to position the image on the page as you wish.
4. Set Print to: JPEG File, Resolution to 300 ppi, check Sharpness, set JPEG Quality and the color space to sRGB.
5. Click on Print to File.

What Are the Exact Basic rules for Replying a Thread...... -:) @};-

Hi Experts,
After Looking into the forums many days I had a small conclusion about forums,
SAP Forums are better place I have seen for getting a goo dhelp & Knowledge...
Why can't we make it a BEST Place.
This is just a small doubt which I would like to clear myself first,
I have seen many users In the forums asking for a Basic Questions
When cleared, But still they want to have a Spoon feeding with a Sample Code.
When Sample Code Given they will provide the original code and requests for Modifications.
These always looks to me as crazy.
I have seen somelong time agin by moderators posting that In SCN there will be no SPOON FEEDING.
I am not sure whether if still this Rule AVAILABLE or NOT.
Ok if the task is really difficult let them ask again and again,
And it was not replied, let them repost, I agree with them.
And How about a User Registered in SDN very long back and asking for a silly question in below thread,
[Sendin Email to the recipent list -Need correct FM |Getting the address from shipto partner of Bil. item not directly from C.ma]
This is one more example, really funny, The thread poster needs the solution at any cost, he doesn't require and Suggetions,,, {He Only needs Solution}
[Radio Buttons |Radio Buttons;
[Turning Off Debugger |Turning Off Debugger;
[Regarding Amount in words|Regarding Amount in words;
There are 100's of threads like this....Everyone knows this facts.
Check this who answered this one and who replied correct answer, who copied, finally who was rewarded...!
[how to validate POsting period |Re: how to validate POsting period]
Now My Real Problem is....!
User is always intelligent, Only the weakness is in Contributor, trying to help them,..,
And I openly say that Someone requesting for basic help is not DUMB, But the Contributor replying forgets
the basic rules " Why Contributing ?"
According to me It's not the Requestor to see Rules & Requlations before posting the threads,
But its responsibilty for the Contributing person to see th Rules & Requlations before replying the threads,
If we follow the rules and stand on a single word or rule or anything there will be Good Result.
Major Problem is in US not anyone else.
Example Some one saying search in the forum,,, then please no replies after that...
But we are very pity hearted again we post the solution,,,
But it is not at all enough(for cintribtor's)... they will copy the solution and post again by slight Modifications,
And Some users are having 500,600,700,800 Posts with 0 points, registered long long back.
They are completly dependent on forums,,, As they goto office and as they eat, The same they open forums and ask Queries...
They will never realize what they are doing,, and we will never let them improve better...
Finally Lets Discuss About this and Correct & Suggest me if I am wrong,
Is my thoughts are going in the right way or not I am not even sure... Please Aslo Correct me if I did any mistakes.
Thanks & regards,
Dileep .C
Edited by: Dileep Kumar Chinnaiah on Apr 29, 2009 12:33 PM
Title Changed Form
"What to do when someone asking for Basic Questions" to "What Are the Exact Basic rules for Replying a Threads...... "

Hi Stephen,
Very useful Information,
First tell me a little something about my self...
After completion of my certification(as a fresher) I was down the streets hunting the job,
with the insufficient knowledge and being a non-experienced person, I never got one.
And mean while when I got my "S-UserID", I used to be proud, To say frankly, I registerd in SDN & SAP all at a time, without even knowing what I can do there..,
When I got a job afterwords I was doing the job and never seen SDN page for many months,
when I came to know that of we have doubts we can post at SDN. then started requesting help,
I posted only a little, I didnot got the proper response. on that day I decided,
still there are some places where we cannot get help on time and there will be people waiting to get help,
Why cant I put some of my efforts to help others.
Then I searched some topic by Topic in SDN topic by Topic I used to read threads just for knowledge.
when I feel my self comfort for contributing, I started contibuting...!
If you haven't read it, take a look first, so you can understand where things are now.
I dont know where things are now. But these in this thread I mentioned clearly what I seen from the day I started contributing.
I searched with the terms of 'Rules for replying', The results are not as I expected, and this link has subject as
"O SDN, where art thou?" So it dosent hit my in the list.
Like everybody until a certain stage I am also rushing for points.
But I most cases I never tried to copy paste answers. If I done some then that is just to point it myself some day,
I have no hopes or no intrest on the points...! This was discussed with Rob & Matt, at my inital contribution where my points are 36.
From that day till date I have changed a lot to myself.
Everyone cannot change like me because they are not like me & And I dont even expect that...!
I will be online almost 6-8Hrs a day, Not even getting intrest to see the forums just because of the co-contributors.
My only point is I am just requesting to a co-contributor,
Clearly In a example : Lets say contributor has replied to a thread, and if you know that is a correct solution,
please dont reply any more, If you have a better solution than that, then only reply,
Even there is one reply in the thread not a matter, if correct answer leave that query.
If still error persists, Show up with your Idea's...
Dont let down the contributor, by copying his reply and editing and pasting(edit only if incorrect).
I am just looking for this one exactly to circulate between ourselfs.
For this we a little support from moderators to circulate(may be as a rule or may be as a mail to them)
You may say again how many mails we have to send, It dosent matter, one mail to one person one time,
and +ve factors will show up definetly.
A real contributor always understand what I am talking about, but some one who hunts for points will never.
I am really sorry if I am troubling with my doubts & requests,
If so, Pleae forgive me,,
Thanks & regards,
Dileep .C

What is the exact GPIB command sequence when calling viclear

I am experiencing some call box lockup problem and viclear is the possible root. What is the exact GPIB command sequence when I call viclear? I need this information to work with Agilent to find the root of the problem. Thanks! I need the exact GPIB commands sent to the equipment.

Hi,
viClear calls the ibclr NI-488.2 function. The ibclr function sends the following bus commands according to the NI-488.2 Software reference Manual:
ibclr calls the board function ibcmd to send the following commands using the designated access board:
� Talk address of access board
� Unlisten (UNL)
� Listen address of the device
� Secondary address of the device, if applicable
� Selected Device Clear (SDC)
Hope this helps.
DiegoF.
National Instruments

Can anyone tell me where to send my i phone to for repair?? I have paid by card on this site but been given no details as to what address it is to be sent . i am not a computer whizz but not an idiot either and i am becoming more and more frustrated !!!!!

Can anyone tell me where to send my i phone to for repair?? I have paid by card on this site but been given no details as to what address it is to be sent . I am not a computer whizz but not an idiot either and i am becoming more and more frustrated !!!!!

Yes, AppleCare can tell you. Below is the number for AppleCare in the US.
1-800-APL-CARE *
1-800-275-2273
Hours of Operation: 7 days a week from 5am - 8pm Pacific time.
If you live outside the US, additional contact information can be found at this link.
http://support.apple.com/kb/he57

Doubt : What is the Exact use of Product/SWCV in an integration process?

Hi XI Gurus,
The XI Documentation(Regarding SWCV) says "All design work is organised By SWCV.This makes sense, as interface logically belongs to a Software component Version"
DOUBT 1 :
What is the Exact Use/Role of Product/SWCV in an integration process? - Is it ONLY for DOCUMENTATION purpose? ie., to just understand the underlying Software used ? OR DOES it have a Technical say in the way the Business System behaves ?.
DOUBT 2 :
What will happen if I create a junk Product(I mean something Meaningless), a junk SWCV BUT while creating a Technical System(I choose Type as WEB AS) BASED on the Junk Product/SWCV ,I give VALID hostname etc...I then create a Business System with data valid data .
Now i have created a TS & BS with Valid HOSTNAME & CLIENT etc. BUT based on the junk Product/Junk SWCV.
NOW in integration dir.,will i be able to configure this Business System as Service for Sending IDOCS/FILE(or anything for that matter)?
If It will work then That means The product/SWCV IS ONLY for documentation purpose.Please rply in detail !
DOUBT 3:
When I import the junk SWCV INTO the IntegrationRepository
& choose import of RFC/IDCOC & give valid connection details to a SAP System , Will it import the RFC Regardless of the Junk SWCV I am using ??
DOUBT 4 :
Business System A(Sender) : SAP R/3(For Example)
Business System B(Receiver) : APO (For Example)
ASSUMPTION : Business system A & B have DIFFERENT SWCV.
Now Which Business System's SWCV do I import in my Integration Repository ?The Sender's or Reciever's ?
and Why ??
It would be great if anyone can help me out.
Thanks,
Arun

hi arun..
>>>>>DOUBT 3:
When I import the junk SWCV INTO the IntegrationRepository
& choose import of RFC/IDCOC & give valid connection details to a SAP System , Will it import the RFC Regardless
yes....
>>>>DOUBT 4 :
Business System A(Sender) : SAP R/3(For Example)
Business System B(Receiver) : APO (For Example)
ASSUMPTION : Business system A & B have DIFFERENT SWCV.
Now Which Business System's SWCV do I import in my Integration Repository ?The Sender's or Reciever's ?
and Why ??
...generally, u import only ofr Sender business system cos tht is the system wher u have defined all the objects for the scenario...
and integration process for Receiver is defined..
>>>DOUBT 1 :
What is the Exact Use/Role of Product/SWCV in an integration process? - Is it ONLY for DOCUMENTATION purpose? ie., to just understand the underlying Software used ? OR DOES it have a Technical say in the way the Business System behaves
the product defines the name genaerllly, the SWCV definesd within the product...there can be many SWC in an product...so an SWC is the smallest component in an product...
>>>>>DOUBT 2 :
What will happen if I create a junk Product(I mean something Meaningless), a junk SWCV BUT while creating a Technical System(I choose Type as WEB AS) BASED on the Junk Product/SWCV ,I give VALID hostname etc...I then create a Business System with data valid data .
Now i have created a TS & BS with Valid HOSTNAME & CLIENT etc. BUT based on the junk Product/Junk SWCV.
NOW in integration dir.,will i be able to configure this Business System as Service for Sending IDOCS/FILE(or anything for that matter)?
If It will work then..
...YOU WILL BE ABLE TO.....
REGARDS...
hope it helps...
vishal

What is the exact purpose of Transaction NACE and NAST Table?

Hi All,
What is the exact purpose of Transaction NACE and NAST Table?
Pls help me
Akshitha.

Hi
When a Output type in an apllication doc is configured with a Medium, Partner, Lang and other communication paramters an entry is created in NAST table
so to trigger the output an entry in NAST is compulsory
Output is a link between the Driver Program and the Sapscript,
An output type summarizes messages of the same meaning. It contains parameters that are valid for all its assigned messages, for example appropriate partner functions.
Transmission medium is a medium which the layout will be come out, this may be printout, Fax or Mail
Check this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/19884743b111d1896f0000e8322d00/content.htm
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
Reward points for useful Answers

What is the emailo address

What is the email address for the fourms so that i can activate my new email address
All help would be great!!!
Matthew C Hilinski Lenovo c200 out of warrenty
ubuntu 9.0

I removed your e-mail from the message above for your privacy and updated it in your profile. Send me a note to the address below if you have a problem.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

I am trying to sync calendar and contacts on the BB Z10, using iCloud. What is the server address?

I am trying to sync calendar and contacts on the BB Z10, using icloud, what is the server address?

How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

I started downloading my Upgrade to Photoshop Elements Version 13 and received my upgrade confirmation and cannot locate the download on my PC running Windows 7,what is the exact name of the download and where should I find it?

I cannot locate the upgrade to Photoshop Elements 11 to Version 13, which I purchased today and started the download as per the Order Confirmation. My order No. is AD014117711. I am running Windows 7 on my PC and cannot locate the Download. How do I find it? What is the exact name of the Download?

EdWeidman by default the download will be saved to your Download folder. I do not know the exact name of the file which was provided to you.

What is the exact address I send my phone to for repairs?

Similar Messages

Maybe you are looking for