What is the exact GPIB command sequence when calling viclear

I am experiencing some call box lockup problem and viclear is the possible root. What is the exact GPIB command sequence when I call viclear? I need this information to work with Agilent to find the root of the problem. Thanks! I need the exact GPIB commands sent to the equipment.

Hi,
viClear calls the ibclr NI-488.2 function. The ibclr function sends the following bus commands according to the NI-488.2 Software reference Manual:
ibclr calls the board function ibcmd to send the following commands using the designated access board:
� Talk address of access board
� Unlisten (UNL)
� Listen address of the device
� Secondary address of the device, if applicable
� Selected Device Clear (SDC)
Hope this helps.
DiegoF.
National Instruments

Similar Messages

What is the exact use of Sequence container

Hi all,
I am intermediate in SSIS package,i am not understanding what is the exact use of Sequence container ?
I am preparing for interview(3 years exp), if experts dont mind can you pls share some tips and questions to clear the interview ?
pls
thanks

Hi SelvakumarSubramaniam,
This blog delivers a good summary of the benefits we can get by using Sequence Container:
Easier debugging by allowing you to disable groups of tasks to focus package debugging on one subset of the package control flow.
Managing multiple tasks in one location by setting properties on a Sequence Container instead of setting properties on the individual tasks.
Provides scope for variables that a group of related tasks and containers use.
Create a transaction around all the components inside the container.
Here are some other good resources:
http://www.phpring.com/sequence-container-in-ssis/
http://sql-developers.blogspot.com/2010/06/sequence-container-in-ssis.html
Regards,
Mike Yin
TechNet Community Support

What is the default key command for the COMMAND key?I seem to have changed it somehow along the way and now when I push the command key it hides all windows or shows desk top I need to correct this as soon as possible-.any ideas?

What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...

Go to
 > System Preferences > Keyboard
Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough:

What is the exact purpose of Transaction NACE and NAST Table?

Hi All,
What is the exact purpose of Transaction NACE and NAST Table?
Pls help me
Akshitha.

Hi
When a Output type in an apllication doc is configured with a Medium, Partner, Lang and other communication paramters an entry is created in NAST table
so to trigger the output an entry in NAST is compulsory
Output is a link between the Driver Program and the Sapscript,
An output type summarizes messages of the same meaning. It contains parameters that are valid for all its assigned messages, for example appropriate partner functions.
Transmission medium is a medium which the layout will be come out, this may be printout, Fax or Mail
Check this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/19884743b111d1896f0000e8322d00/content.htm
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
Reward points for useful Answers

What is the exact purpose of At New Commanad

What is the exact purpose of At New Commanad.
Ex: At New VBELN
Thanx in Advance.
Akshitha.

Hi Akshitha,
Variant 1
AT NEW f.
Variant 2
AT END OF f.
Effect
f is a field from the field group HEADER . The enclosed sequence of statements is executed if
the field f occurs in the sort key of the extract dataset (and thus also in the field group HEADER ) and
the field f or a superior sort criterion has a different value in the current LOOP line than in the prceding ( AT NEW ) or subsequent ( AT END OF ) record of the extract dataset.
Example
DATA: NAME(30),
      SALES TYPE I.
FIELD-GROUPS: HEADER, INFOS.
INSERT: NAME INTO HEADER,
        SALES INTO INFOS.
LOOP.
AT NEW NAME.
    NEW-PAGE.
ENDAT.
AT END OF NAME.
    WRITE: / NAME, SUM(SALES).
ENDAT.
ENDLOOP.
Notes
If the extract dataset is not sorted before processing with LOOP , no control level structure is defined and the statements following AT NEW or AT END OF are not executed.
Fields which stand at hex zero are ignored by the control break check with AT NEW or AT END OF . This corresponds to the behavior of the SORT statement, which always places unoccupied fields (i.e. fields which stand at hex zero) before all occupied fields when sorting extract datasets, regardless of whether the sort sequence is in ascending or descending order.

What is the exact protocol for ejecting Time Machine disk from USB?

I have an external drive that I connect and use for Time Machine. When I'm done, I eject the drive and Finder disappears. I pull the USB connector and the OS complains that I did not eject the drive properly.
I've seem the other threads, and I'm afraid I'm going to get a lot of discussion and no answer. So here's a simple question:
What is the exact protocol for closing Time Machine and disconnecting the USB cable to the drive without getting a complaint from the OS?
Thanks
Mike

Drag the icon to the trash or highlight it and use the eject button or highlight it and use Command+e.

What is the value of sy-ucomm when tab is pressed

Hi Experts,
what is the value of sy-ucomm when tab is pressed or is there any way to detect or capture the pressing of tab as we do for the enter. if so kindly help
please advance thanks

Hi Samraj,
Consider this sample code, here based on user commands the code calls the Tab's.
Define
Data : pressed_tab LIKE sy-ucomm VALUE c_ticket-tab1,
IN PBO
MODULE ticket_active_tab_set.
CALL SUBSCREEN ticket_sca
INCLUDING g_ticket-prog g_ticket-subscreen.
MODULE ticket_active_tab_set OUTPUT.
ticket-activetab = pressed_tab.
CASE pressed_tab.
WHEN c_ticket-tab1.
g_ticket-subscreen = '0204'.
WHEN c_ticket-tab2.
g_ticket-subscreen = '0205'.
WHEN c_ticket-tab3.
g_ticket-subscreen = '0206'.
WHEN OTHERS.
DO NOTHING
ENDCASE.
ENDMODULE. " TICKET_ACTIVE_TAB_SET OUTPUT
Thanks,
Reward If helpful.

What Are the Exact Basic rules for Replying a Thread...... -:) @};-

Hi Experts,
After Looking into the forums many days I had a small conclusion about forums,
SAP Forums are better place I have seen for getting a goo dhelp & Knowledge...
Why can't we make it a BEST Place.
This is just a small doubt which I would like to clear myself first,
I have seen many users In the forums asking for a Basic Questions
When cleared, But still they want to have a Spoon feeding with a Sample Code.
When Sample Code Given they will provide the original code and requests for Modifications.
These always looks to me as crazy.
I have seen somelong time agin by moderators posting that In SCN there will be no SPOON FEEDING.
I am not sure whether if still this Rule AVAILABLE or NOT.
Ok if the task is really difficult let them ask again and again,
And it was not replied, let them repost, I agree with them.
And How about a User Registered in SDN very long back and asking for a silly question in below thread,
[Sendin Email to the recipent list -Need correct FM |Getting the address from shipto partner of Bil. item not directly from C.ma]
This is one more example, really funny, The thread poster needs the solution at any cost, he doesn't require and Suggetions,,, {He Only needs Solution}
[Radio Buttons |Radio Buttons;
[Turning Off Debugger |Turning Off Debugger;
[Regarding Amount in words|Regarding Amount in words;
There are 100's of threads like this....Everyone knows this facts.
Check this who answered this one and who replied correct answer, who copied, finally who was rewarded...!
[how to validate POsting period |Re: how to validate POsting period]
Now My Real Problem is....!
User is always intelligent, Only the weakness is in Contributor, trying to help them,..,
And I openly say that Someone requesting for basic help is not DUMB, But the Contributor replying forgets
the basic rules " Why Contributing ?"
According to me It's not the Requestor to see Rules & Requlations before posting the threads,
But its responsibilty for the Contributing person to see th Rules & Requlations before replying the threads,
If we follow the rules and stand on a single word or rule or anything there will be Good Result.
Major Problem is in US not anyone else.
Example Some one saying search in the forum,,, then please no replies after that...
But we are very pity hearted again we post the solution,,,
But it is not at all enough(for cintribtor's)... they will copy the solution and post again by slight Modifications,
And Some users are having 500,600,700,800 Posts with 0 points, registered long long back.
They are completly dependent on forums,,, As they goto office and as they eat, The same they open forums and ask Queries...
They will never realize what they are doing,, and we will never let them improve better...
Finally Lets Discuss About this and Correct & Suggest me if I am wrong,
Is my thoughts are going in the right way or not I am not even sure... Please Aslo Correct me if I did any mistakes.
Thanks & regards,
Dileep .C
Edited by: Dileep Kumar Chinnaiah on Apr 29, 2009 12:33 PM
Title Changed Form
"What to do when someone asking for Basic Questions" to "What Are the Exact Basic rules for Replying a Threads...... "

Hi Stephen,
Very useful Information,
First tell me a little something about my self...
After completion of my certification(as a fresher) I was down the streets hunting the job,
with the insufficient knowledge and being a non-experienced person, I never got one.
And mean while when I got my "S-UserID", I used to be proud, To say frankly, I registerd in SDN & SAP all at a time, without even knowing what I can do there..,
When I got a job afterwords I was doing the job and never seen SDN page for many months,
when I came to know that of we have doubts we can post at SDN. then started requesting help,
I posted only a little, I didnot got the proper response. on that day I decided,
still there are some places where we cannot get help on time and there will be people waiting to get help,
Why cant I put some of my efforts to help others.
Then I searched some topic by Topic in SDN topic by Topic I used to read threads just for knowledge.
when I feel my self comfort for contributing, I started contibuting...!
If you haven't read it, take a look first, so you can understand where things are now.
I dont know where things are now. But these in this thread I mentioned clearly what I seen from the day I started contributing.
I searched with the terms of 'Rules for replying', The results are not as I expected, and this link has subject as
"O SDN, where art thou?" So it dosent hit my in the list.
Like everybody until a certain stage I am also rushing for points.
But I most cases I never tried to copy paste answers. If I done some then that is just to point it myself some day,
I have no hopes or no intrest on the points...! This was discussed with Rob & Matt, at my inital contribution where my points are 36.
From that day till date I have changed a lot to myself.
Everyone cannot change like me because they are not like me & And I dont even expect that...!
I will be online almost 6-8Hrs a day, Not even getting intrest to see the forums just because of the co-contributors.
My only point is I am just requesting to a co-contributor,
Clearly In a example : Lets say contributor has replied to a thread, and if you know that is a correct solution,
please dont reply any more, If you have a better solution than that, then only reply,
Even there is one reply in the thread not a matter, if correct answer leave that query.
If still error persists, Show up with your Idea's...
Dont let down the contributor, by copying his reply and editing and pasting(edit only if incorrect).
I am just looking for this one exactly to circulate between ourselfs.
For this we a little support from moderators to circulate(may be as a rule or may be as a mail to them)
You may say again how many mails we have to send, It dosent matter, one mail to one person one time,
and +ve factors will show up definetly.
A real contributor always understand what I am talking about, but some one who hunts for points will never.
I am really sorry if I am troubling with my doubts & requests,
If so, Pleae forgive me,,
Thanks & regards,
Dileep .C

What is the exact problem with this file?

Hi all,
There is an old form , which was not in use from many days.
Now when we tried to run the form, i got the error saying "FRM-40734:Internal Error:Pl/SQL error occured.", in the login form.
When i tried to open the fmb file in Oracle Forms Builder 6i, i got the following error:
FRM-10102: Cannot attach PL/SQL library d2kwutil. This library attachment will be lost if the module is saved., but the fmb file got open.
The login button has the following code:
DECLARE
UNAME VARCHAR2(30);
--USER_ID PARAMLIST;
V_USER APUSERMA.USER_NAME%TYPE;
V_PASSWED APUSERMA.USER_PASSWD%TYPE;
BEGIN
select user_CD INTO :GLOBAL.USER_ID from apuserma
where user_CD = :TI_USER_NAME AND user_PASSWD = :IT_USER_PASSWD
AND SYSDATE BETWEEN USER_VALID_FRM AND USER_VALID_TO;
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
:global.compname := :compname;
compnm(:compname);
--USER_ID := CREATE_PARAMETER_LIST('USER_id_NAME');
call_form('Forms\MAIN_SCREEN',hide,DO_REPLACE);
exception
when no_data_found then
MESSAGE('Incorrect Username or Password. Please Re-Enter');
message(' ');
RAISE FORM_TRIGGER_FAILURE;
END;
EXIT_FORM;
When i tried to compile, i got error saying ,
Error 201 at line 10, column 28
identifier 'WIN_API_ENVIRONMENT.READ_REGISTRY' must be declared.
I am not getting to know What is the exact problem with this file?
Help me with this please.
Thank You.
Oracle forms builder 6i.
Oracle 9i.

Vijetha wrote:
I also want to know what is the use of win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername') ??
What does it do??
If i comment the following line , will it be a problem??
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
Because i commented the above line & compiled, so it is not giving any error now.
So please tell me what win_api_environment.read_registry does??
it's read windows registry value. So, no problem if you comment it.
Thanks

What is the exact technical difference between "Lightning to USB Camera Adapter" and "Lightning to USB Cable"

Mainly I am interested in attaching the iPhone to a receiver (or car etc.) to play music.
Both the "Lightning to USB Cable" and the "Lightning to USB Camera Adapter" seem to do the trick. So what is the exact technical difference between the two items?
When connected to a receiver, is the iPhone the USB Master in both cases? Is the USB "Audio Device Class" standard used to transmit audio?

Thanks for all the answers! I think I should specify the use case much more clearly. Sorry for not having done this earlier.
Use Case 1:
When I connect the iPhone to the receiver I can use the Lightning to USB, because the receiver has a female type A, just like e.g. a PC or like the charger. So I would agree that the Receiver must be the USB host, and the iPhone the USB device. This works just fine in my case, with iPhone and iPad.
In this case, the audio goes from the device to the host, or "Audio-in".
Use Case 2:
A friend of mine has a small device that converts USB to Toslink. This thing has a female Mini USB Type A, which is typically used at the receiving side of a USB connection. This device can be connected e.g. to a Mac, and then the Mac can output audio via this device to receiver which accepts optical Toslink signals.
In this case, the audio goes from the host to the device, or "Audio-out".
It is this use case 2 that I am unsure about:
a) Can the Lightning to USB cable be used in this case (assuming that I find the necessary non-standard adapters to actually connect the USB ports)? This would mean that the iPhone can act as a USB host with the Lightning to USB cable.
b) I know that the Lightning to USB Camera Adapter does convert the iPad into an USB host, otherwise it could not read data from a camera. So could this adapter also be used to produce "Audio out" to a USB device that supports receiving music?
If yes, would this also work with an iPhone (as pointed out in another answer, the iPhone does nor support reading pictures from a camera)?

What is the exact way of doing BDC ?????

I know when the input is minimal we have to use CALL TRANSACTION method in BDC and when we have batch of input files we have to use BDC Recording.
My question is what is the exact way of doing BDC.
Could any one please tell me the exact way of doing BDC Recording Process.
I appreciate your help.
Thanks for your Time.
Shiv.

Hello Sivaramu,
Call transcation can handle only one Trasaction(Tcode).
Session method can handle multiple transcations.
Before getting started with the Recording process...we have to know the transcation code. We do recording to record the screen number, screen values, Button values(OK codes) ...etc
For example...while recording we create a record using some t-code (Say MM01) ...Now, we will create a materail master record using the Recording process.
Let us see the process of recoding a single record with MM01 using SHDB(A tool used to record the details of T-code)
Go through these steps for recording by using SHDB.
How to use recording :
Go to SHDB
--> Click on New Recording
--> Provide any name in Recording , For ex: Z_CHAITU
--> Provide the Transaction name as MM01
--> Select the update mode as Synchrounous or Asynchrounus method
--> Click on Start Recording button.
--> It will display MM01 screen.type the appropriate
information in it.
--> Type the Material no as : 4567E (Any no, But there should b 1 Character in it)
--> Type Checmical Industry in INDUSTRY SECTOR
--> Type COUPONS in MATERIAL TYPE
--> Now click on Select Views button.
--> Select BASIC DATA 1
--> Click on Ok button
--> Under Basic data tab under Material, it will display the Material number.
--> Type the short description and Provide EA as Base Unit Of Measure
--> CLICK ON BACK AND IT WILL ASK U TO SAVE THE DATA, CLICK ON YES
--> Again click on Back, it will ask if u wish to save the changes to record entries.
-> Click on Yes
--> Now, u will be in Initial screen
--> Select the record and Click on Program button
--> Now, provide any program name
--> Now, select Transfer from recording
--> Click on Tick mark
--> Give some short description
--> Type as Executable
--> Click on Source Code button
--> Automatically the code will appear in SE 38 program.
U can try these steps with any T-code by knowing the Mandatory fields in it.
---> *Now by following all the above steps ur done with the recording process to create a single record in MAterail master (MM01). Now, we use the same recording process and put this recording under Loop in report program.*
So that, it will follow the same steps automatically to create materail master records from the flat file. If you have 10 records in flat file(Note pad) then it will do the same process for 10 times to upload 10 records from the flat file using the recoding process that we have done by using the SHDB
If you want then i will provide you with the sample program to upload the data for MK01 using Call transcation and Session method.
Call transcation method for MK01:
U can try these steps with any T-code by knowing the Mandatory fields in it.
& TITLE : BDC FOR MK01
*& DESCR : UPLOAD THE DATA THROUGH FLAT FILE
*& TRANSPORT : DOLK901203
*& VERSION : V1
*& DATE : 17th , JAN , 2008
report Z24_BDC_MK01
       no standard page heading line-size 255.
*& DECLARATIONS OF STRUCTURE FOR MK01
TYPES : BEGIN OF TY_MK01 ,
         KTOKK TYPE RF02K-KTOKK ,
         NAME1 TYPE LFA1-NAME1 ,
         SORTL TYPE LFA1-SORTL ,
         PSTLZ TYPE LFA1-PSTLZ ,
         LAND1 TYPE LFA1-LAND1 ,
         END OF TY_MK01 .
*& DECLARATION OF INTERNAL TABLE
DATA : T_MK01 TYPE STANDARD TABLE OF TY_MK01 INITIAL SIZE 0 ,
       T_BDCDATA TYPE STANDARD TABLE OF BDCDATA INITIAL SIZE 0 ,
       T_BDCMSGCOLL TYPE STANDARD TABLE OF BDCMSGCOLL INITIAL SIZE 0 ,
       T_ERROR TYPE STANDARD TABLE OF TY_MK01 INITIAL SIZE 0 ,
*& DECLARATION OF WORK AREA
       W_MK01 TYPE TY_MK01 ,
       W_BDCDATA TYPE BDCDATA ,
       W_BDCMSGCOLL TYPE BDCMSGCOLL .
*& DECLARATION OF SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME .
PARAMETERS : P_FILE TYPE FILENAME .
SELECTION-SCREEN END OF BLOCK B1 .
*& DECLARATION OF START-OF-SELECTION
START-OF-SELECTION .
PERFORM SUB_UPLOAD_DATA .
PERFORM SUB_POPULATE_BDC .
PERFORM SUB_ERROR_REC .
*include bdcrecx1.
*&      Form SUB_UPLOAD_DATA
      text
form SUB_UPLOAD_DATA .
DATA : L_FILE TYPE STRING .
     L_FILE = P_FILE .
CALL FUNCTION 'GUI_UPLOAD'
   EXPORTING
     filename                      = L_FILE
     HAS_FIELD_SEPARATOR           = 'X'
   tables
     data_tab                      = T_MK01 .
endform.                    " SUB_UPLOAD_DATA
*&      Form SUB_POPULATE_BDC
      text
form SUB_POPULATE_BDC .
LOOP AT T_MK01 INTO W_MK01 .
DATA : L_MSG TYPE STRING .
REFRESH T_BDCDATA .
perform bdc_dynpro      using 'SAPMF02K' '0107'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-KTOKK'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-KTOKK'
                               W_MK01-KTOKK.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-LAND1'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFA1-NAME1'
                               W_MK01-NAME1.
perform bdc_field       using 'LFA1-SORTL'
                               W_MK01-SORTL.
perform bdc_field       using 'LFA1-PSTLZ'
                               W_MK01-PSTLZ.
perform bdc_field       using 'LFA1-LAND1'
                               W_MK01-LAND1.
perform bdc_dynpro      using 'SAPMF02K' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-KUNNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-LIFNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
CALL TRANSACTION 'MK01' USING T_BDCDATA MODE 'N' MESSAGES INTO T_BDCMSGCOLL .
IF SY-SUBRC <> 0 .
APPEND W_MK01 TO T_ERROR .
ENDIF .
CLEAR W_BDCMSGCOLL .
READ TABLE T_BDCMSGCOLL INTO W_BDCMSGCOLL INDEX 1 .
CLEAR L_MSG .
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
   ID              = W_BDCMSGCOLL-MSGID
   LANG            = SY-LANGU
   NO              = W_BDCMSGCOLL-MSGNR
   V1              = W_BDCMSGCOLL-MSGV1
   V2              = W_BDCMSGCOLL-MSGV2
   V3              = W_BDCMSGCOLL-MSGV3
   V4              = W_BDCMSGCOLL-MSGV4
IMPORTING
   MSG             = L_MSG
EXCEPTIONS
   NOT_FOUND       = 1
   OTHERS          = 2
IF sy-subrc = 0.
WRITE : / 'MESSAGE FOR ' , W_MK01-KTOKK ,'-------' , L_MSG .
ENDIF.
ENDLOOP .
endform.                    " SUB_POPULATE_BDC
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR W_BDCDATA.
W_BDCDATA-PROGRAM = PROGRAM.
W_BDCDATA-DYNPRO   = DYNPRO.
W_BDCDATA-DYNBEGIN = 'X'.
APPEND W_BDCDATA TO T_BDCDATA .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
    CLEAR W_BDCDATA.
    W_BDCDATA-FNAM = FNAM.
    W_BDCDATA-FVAL = FVAL.
    APPEND W_BDCDATA TO T_BDCDATA .
ENDFORM.
*&      Form SUB_ERROR_REC
      text
--> p1        text
<-- p2        text
form SUB_ERROR_REC .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename                        = 'C:/ERRORS OF MK01.TXT'
   WRITE_FIELD_SEPARATOR           = 'X'
tables
    data_tab                        = T_ERROR .
endform.                    " SUB_ERROR_REC
Session Method for MK01:
*& PURPOSE : This BDC report is used to upload all the vendor master
*&           data in to SAP using SESSION METHOD with handling the errors
report Y035_SESSION_METHOD
       no standard page heading line-size 255.
*& Structure declaration
*Structure Declaration for source internal table
TYPES : BEGIN OF TY_UPLOAD,
          LIFNR TYPE RF02K-LIFNR,
          EKORG TYPE RF02K-EKORG,
          KTOKK TYPE RF02K-KTOKK,
          NAME1 TYPE LFA1-NAME1,
          SORTL TYPE LFA1-SORTL,
          LAND1 TYPE LFA1-LAND1,
          SPRAS TYPE LFA1-SPRAS,
          WAERS TYPE LFM1-WAERS,
        END OF TY_UPLOAD.
*& Internal Table declaration
*Internal Table Declaration for source table
DATA : T_UPLOAD TYPE STANDARD TABLE OF TY_UPLOAD INITIAL SIZE 0,
*Internal Table Declaration for bdcdata
       T_BDCDATA TYPE STANDARD TABLE OF BDCDATA INITIAL SIZE 0,
*Internal table declaration for BDCMSGCOLL (To handle the errors)
       T_BDCMSG TYPE STANDARD TABLE OF BDCMSGCOLL,
*Internal table declaration for reprocess the errors
       T_ERRORS TYPE STANDARD TABLE OF TY_UPLOAD INITIAL SIZE 0,
*& Workarea declaration
*Work area delaration for source table
       W_UPLOAD TYPE TY_UPLOAD,
*Work area delaration for bdcdata
       W_BDCDATA TYPE BDCDATA,
*Work area delaration for BDCMSGCOLL
       W_BDCMSG TYPE BDCMSGCOLL.
*& Selection screen declaration
*Selection Screen declaration
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS : P_FLNAME TYPE FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
*& Start of selection declaration
*Start of selection declaration
START-OF-SELECTION.
*Upload the data
PERFORM SUB_UPLOAD_DATA.
*Populate the BDC data
PERFORM SUB_POPULATE_BDC.
*Process the error records
PERFORM SUB_ERROR_RECORD.
*include bdcrecx1.
*&      Form SUB_UPLOAD_DATA
      This subroutine is used to upload the data
FORM SUB_UPLOAD_DATA .
DATA : L_FLNAME TYPE STRING.
L_FLNAME = P_FLNAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = L_FLNAME
FILETYPE                      = 'ASC'
    HAS_FIELD_SEPARATOR           = 'X'
TABLES
    DATA_TAB                      = T_UPLOAD.
ENDFORM.                    " SUB_UPLOAD_DATA
*&      Form SUB_POPULATE_BDC
      This subroutine is used to populate the BDC data
FORM SUB_POPULATE_BDC .
DATA : L_MSG TYPE STRING.
*To oper a sesion in SE35
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
   CLIENT                    = SY-MANDT
   GROUP                     = 'MAMA_SESSION'
   USER                      = SY-UNAME
   KEEP                      = 'X'
   HOLDDATE                 = '20080129'
   PROG                      = SY-CPROG.
LOOP AT T_UPLOAD INTO W_UPLOAD.
REFRESH T_BDCDATA.
perform bdc_dynpro      using 'SAPMF02K'         '0107'.
perform bdc_field       using 'BDC_CURSOR'       'RF02K-KTOKK'.
perform bdc_field       using 'BDC_OKCODE'       '/00'.
perform bdc_field       using 'RF02K-LIFNR'      W_UPLOAD-LIFNR.
perform bdc_field       using 'RF02K-EKORG'      W_UPLOAD-EKORG.
perform bdc_field       using 'RF02K-KTOKK'      W_UPLOAD-KTOKK.
perform bdc_dynpro      using 'SAPMF02K'         '0110'.
perform bdc_field       using 'BDC_CURSOR'       'LFA1-SPRAS'.
perform bdc_field       using 'BDC_OKCODE'       '/00'.
perform bdc_field       using 'LFA1-NAME1'       W_UPLOAD-NAME1.
perform bdc_field       using 'LFA1-SORTL'       W_UPLOAD-SORTL.
perform bdc_field       using 'LFA1-LAND1'       W_UPLOAD-LAND1.
perform bdc_field       using 'LFA1-SPRAS'       W_UPLOAD-SPRAS.
perform bdc_dynpro      using 'SAPMF02K'         '0120'.
perform bdc_field       using 'BDC_CURSOR'       'LFA1-KUNNR'.
perform bdc_field       using 'BDC_OKCODE'       '/00'.
perform bdc_dynpro      using 'SAPMF02K'         '0310'.
perform bdc_field       using 'BDC_CURSOR'       'LFM1-WAERS'.
perform bdc_field       using 'BDC_OKCODE'       '/00'.
perform bdc_field       using 'LFM1-WAERS'       W_UPLOAD-WAERS.
perform bdc_dynpro      using 'SAPMF02K'         '0320'.
perform bdc_field       using 'BDC_CURSOR'       'RF02K-LIFNR'.
perform bdc_field       using 'BDC_OKCODE'       '=ENTR'.
perform bdc_dynpro      using 'SAPLSPO1'         '0300'.
perform bdc_field       using 'BDC_OKCODE'       '=YES'.
*Transfer data to the session
CALL FUNCTION 'BDC_INSERT'
EXPORTING
   TCODE                  = 'MK01'
TABLES
    dynprotab              = T_BDCDATA.
ENDLOOP.
*To close the session
CALL FUNCTION 'BDC_CLOSE_GROUP'.
ENDFORM.                    " SUB_POPULATE_BDC
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR W_BDCDATA.
W_BDCDATA-PROGRAM = PROGRAM.
W_BDCDATA-DYNPRO   = DYNPRO.
W_BDCDATA-DYNBEGIN = 'X'.
APPEND W_BDCDATA TO T_BDCDATA.
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
    CLEAR W_BDCDATA.
    W_BDCDATA-FNAM = FNAM.
    W_BDCDATA-FVAL = FVAL.
    APPEND W_BDCDATA TO T_BDCDATA.
ENDFORM.
*&      Form SUB_ERROR_RECORD
     This subroutine is used to process the error records
         in to a file T_ERRORS
FORM SUB_ERROR_RECORD .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME                        = 'C:\MAMA_ERRORS.TXT'
   WRITE_FIELD_SEPARATOR           = 'X'
TABLES
    DATA_TAB                        = T_ERRORS.
ENDFORM.                    " SUB_ERROR_RECORD
Hope the Explonation and information I had provided will resolve your issue.
Reward points if information is very Helpful.
Have a great day!
Regards,
Krishna Chaitanya
Edited by: Krishna Chaitanya on Apr 7, 2008 4:59 AM

Doubt : What is the Exact use of Product/SWCV in an integration process?

Hi XI Gurus,
The XI Documentation(Regarding SWCV) says "All design work is organised By SWCV.This makes sense, as interface logically belongs to a Software component Version"
DOUBT 1 :
What is the Exact Use/Role of Product/SWCV in an integration process? - Is it ONLY for DOCUMENTATION purpose? ie., to just understand the underlying Software used ? OR DOES it have a Technical say in the way the Business System behaves ?.
DOUBT 2 :
What will happen if I create a junk Product(I mean something Meaningless), a junk SWCV BUT while creating a Technical System(I choose Type as WEB AS) BASED on the Junk Product/SWCV ,I give VALID hostname etc...I then create a Business System with data valid data .
Now i have created a TS & BS with Valid HOSTNAME & CLIENT etc. BUT based on the junk Product/Junk SWCV.
NOW in integration dir.,will i be able to configure this Business System as Service for Sending IDOCS/FILE(or anything for that matter)?
If It will work then That means The product/SWCV IS ONLY for documentation purpose.Please rply in detail !
DOUBT 3:
When I import the junk SWCV INTO the IntegrationRepository
& choose import of RFC/IDCOC & give valid connection details to a SAP System , Will it import the RFC Regardless of the Junk SWCV I am using ??
DOUBT 4 :
Business System A(Sender) : SAP R/3(For Example)
Business System B(Receiver) : APO (For Example)
ASSUMPTION : Business system A & B have DIFFERENT SWCV.
Now Which Business System's SWCV do I import in my Integration Repository ?The Sender's or Reciever's ?
and Why ??
It would be great if anyone can help me out.
Thanks,
Arun

hi arun..
>>>>>DOUBT 3:
When I import the junk SWCV INTO the IntegrationRepository
& choose import of RFC/IDCOC & give valid connection details to a SAP System , Will it import the RFC Regardless
yes....
>>>>DOUBT 4 :
Business System A(Sender) : SAP R/3(For Example)
Business System B(Receiver) : APO (For Example)
ASSUMPTION : Business system A & B have DIFFERENT SWCV.
Now Which Business System's SWCV do I import in my Integration Repository ?The Sender's or Reciever's ?
and Why ??
...generally, u import only ofr Sender business system cos tht is the system wher u have defined all the objects for the scenario...
and integration process for Receiver is defined..
>>>DOUBT 1 :
What is the Exact Use/Role of Product/SWCV in an integration process? - Is it ONLY for DOCUMENTATION purpose? ie., to just understand the underlying Software used ? OR DOES it have a Technical say in the way the Business System behaves
the product defines the name genaerllly, the SWCV definesd within the product...there can be many SWC in an product...so an SWC is the smallest component in an product...
>>>>>DOUBT 2 :
What will happen if I create a junk Product(I mean something Meaningless), a junk SWCV BUT while creating a Technical System(I choose Type as WEB AS) BASED on the Junk Product/SWCV ,I give VALID hostname etc...I then create a Business System with data valid data .
Now i have created a TS & BS with Valid HOSTNAME & CLIENT etc. BUT based on the junk Product/Junk SWCV.
NOW in integration dir.,will i be able to configure this Business System as Service for Sending IDOCS/FILE(or anything for that matter)?
If It will work then..
...YOU WILL BE ABLE TO.....
REGARDS...
hope it helps...
vishal

What is the exact definition of PO status "Changes transmitted" ?

Hi'
Can any one tel me what is the exact definition of PO status "Changes transmitted" ?
We are using a SRM05 system.
Thanks.

Hi Yaron,
Changes transmitted status u2013 is related to POs for which the output is generated and processed (sent to vendor).
BBP_PO_ACTION_DEF> BBP_PD_PO> Go to action definition -->
Processing time -->
*_u2018Processing using Selection reportu2019_* -- Output is generated but not
processed manually we have to process it.
How to process the PO output manually?
Goto bbp_ppf / 'Issue Purchase Order' --> Enter PO number in
"Application Key" field --> remove the "Time frame" -->
Process the output (click on 'Output' Push button)
Processing when saving document --> Output is generated when you
ORDER the PO.
Please check the output definition maintained in your system. Also you can check this by processing the PO output manually. Once the PO output
is processed successfully, the PO will appear in "Changes Transmitted" status search result.
Hope this information would clarify your query.
Regards,
Amudha R V

What is the exact use of statistical updates in V1,V2 and V3

Hi,
Can anyone answer me some questions.
1. what is the exact use of statistial update in V1,v2 and V3. If data is same in both document update and statistical update the why u need a second table with redundant data.
2. When BW extracts data is it recommended to extract from statistical tables or document updated tables.(i read that statistical updation is tailored for reporting)
3. Is V3 applicable only when BW extracts data from R/3.
4.In case of V3 the initialization of updates are done from BW side or R/3 side. i mean is there any relationship between scheduling of dataloading using an infopackage in BW and the V3 process taking place in R/3

1. First one has to understand that R3 is OLTP system purely used for transactin processing while BW is used for OLAP ie reporting purpose only. At a table level if we do not have a redundant second table the R3 system will be over loaded when the OLTP & the OLAP systems access the same table for their respective purposes. So we have to take data from the document table with a time lag and put into the statistical tables so that BW will get the data as and when required.
2. This question is related to 1 and the above answers both.
3. V3 is a generic process and is used for data extraction from the R3 transaction tables and can be used for any system as such.
4. Both the processes are independent of each other and there is no relationship.
Hope this helps
Cheers
Viva
Assign points if this helps.

What is the use of command and alternate in flowlogic

what is the use of command and alternate in flowlogic in SMARTFORMS?

Yes, but you have no way of knowing whether what you find on Google is right or not.We can say its right as long google places oracle docs at the top when you type some thing related to oracle.
I aways see something else on the top. I dont believe people stopped hitting or reading or searching oracle docs.
Regards,
G.

What is the exact GPIB command sequence when calling viclear

Similar Messages

Maybe you are looking for