What is the exact name of my ISP?

What is the name of my ISP? (for Macbook Pro)

Where are you seeing this is required? The ISP is the name of your internet service provider.

Similar Messages

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

I started downloading my Upgrade to Photoshop Elements Version 13 and received my upgrade confirmation and cannot locate the download on my PC running Windows 7,what is the exact name of the download and where should I find it?

I cannot locate the upgrade to Photoshop Elements 11 to Version 13, which I purchased today and started the download as per the Order Confirmation. My order No. is AD014117711. I am running Windows 7 on my PC and cannot locate the Download. How do I find it? What is the exact name of the Download?

EdWeidman by default the download will be saved to your Download folder. I do not know the exact name of the file which was provided to you.

What is the right name for Apple Maps.

What is the exact name for Apple Maps. I cannot find on in the app store written by Apple. I want to make sure i get the real thing or else I guess its Google!

Thanks Andy I did not know that. But how can I get it on an i-phone 5S. Turn by turn directions on a desktop of lap top are no good when you are driving.

What is the exact file name for Adobe Photoshop Elements application?

what is the exact file name for Adobe Photoshop Elements application?
I jsut downn laoded it and the alias does not work. in the support folder I have an application titled Adobe photoshop Elements Editor and it lauches ok but when I got to import a photo it only asks for a frame from a video.

You do not import anything to the editor. You just open things there using File>Open. Import is only for frame from video and for scanning if your scanner is compatible and you install the PSE twain plug-in.
If you wish to use PSE to keep track of your photos, launch Adobe Elements 11 Organizer instead of the editor.

What is the exact way of doing BDC ?????

I know when the input is minimal we have to use CALL TRANSACTION method in BDC and when we have batch of input files we have to use BDC Recording.
My question is what is the exact way of doing BDC.
Could any one please tell me the exact way of doing BDC Recording Process.
I appreciate your help.
Thanks for your Time.
Shiv.

Hello Sivaramu,
Call transcation can handle only one Trasaction(Tcode).
Session method can handle multiple transcations.
Before getting started with the Recording process...we have to know the transcation code. We do recording to record the screen number, screen values, Button values(OK codes) ...etc
For example...while recording we create a record using some t-code (Say MM01) ...Now, we will create a materail master record using the Recording process.
Let us see the process of recoding a single record with MM01 using SHDB(A tool used to record the details of T-code)
Go through these steps for recording by using SHDB.
How to use recording :
Go to SHDB
--> Click on New Recording
--> Provide any name in Recording , For ex: Z_CHAITU
--> Provide the Transaction name as MM01
--> Select the update mode as Synchrounous or Asynchrounus method
--> Click on Start Recording button.
--> It will display MM01 screen.type the appropriate
information in it.
--> Type the Material no as : 4567E (Any no, But there should b 1 Character in it)
--> Type Checmical Industry in INDUSTRY SECTOR
--> Type COUPONS in MATERIAL TYPE
--> Now click on Select Views button.
--> Select BASIC DATA 1
--> Click on Ok button
--> Under Basic data tab under Material, it will display the Material number.
--> Type the short description and Provide EA as Base Unit Of Measure
--> CLICK ON BACK AND IT WILL ASK U TO SAVE THE DATA, CLICK ON YES
--> Again click on Back, it will ask if u wish to save the changes to record entries.
-> Click on Yes
--> Now, u will be in Initial screen
--> Select the record and Click on Program button
--> Now, provide any program name
--> Now, select Transfer from recording
--> Click on Tick mark
--> Give some short description
--> Type as Executable
--> Click on Source Code button
--> Automatically the code will appear in SE 38 program.
U can try these steps with any T-code by knowing the Mandatory fields in it.
---> *Now by following all the above steps ur done with the recording process to create a single record in MAterail master (MM01). Now, we use the same recording process and put this recording under Loop in report program.*
So that, it will follow the same steps automatically to create materail master records from the flat file. If you have 10 records in flat file(Note pad) then it will do the same process for 10 times to upload 10 records from the flat file using the recoding process that we have done by using the SHDB
If you want then i will provide you with the sample program to upload the data for MK01 using Call transcation and Session method.
Call transcation method for MK01:
U can try these steps with any T-code by knowing the Mandatory fields in it.
& TITLE : BDC FOR MK01
*& DESCR : UPLOAD THE DATA THROUGH FLAT FILE
*& TRANSPORT : DOLK901203
*& VERSION : V1
*& DATE : 17th , JAN , 2008
report Z24_BDC_MK01
       no standard page heading line-size 255.
*& DECLARATIONS OF STRUCTURE FOR MK01
TYPES : BEGIN OF TY_MK01 ,
         KTOKK TYPE RF02K-KTOKK ,
         NAME1 TYPE LFA1-NAME1 ,
         SORTL TYPE LFA1-SORTL ,
         PSTLZ TYPE LFA1-PSTLZ ,
         LAND1 TYPE LFA1-LAND1 ,
         END OF TY_MK01 .
*& DECLARATION OF INTERNAL TABLE
DATA : T_MK01 TYPE STANDARD TABLE OF TY_MK01 INITIAL SIZE 0 ,
       T_BDCDATA TYPE STANDARD TABLE OF BDCDATA INITIAL SIZE 0 ,
       T_BDCMSGCOLL TYPE STANDARD TABLE OF BDCMSGCOLL INITIAL SIZE 0 ,
       T_ERROR TYPE STANDARD TABLE OF TY_MK01 INITIAL SIZE 0 ,
*& DECLARATION OF WORK AREA
       W_MK01 TYPE TY_MK01 ,
       W_BDCDATA TYPE BDCDATA ,
       W_BDCMSGCOLL TYPE BDCMSGCOLL .
*& DECLARATION OF SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME .
PARAMETERS : P_FILE TYPE FILENAME .
SELECTION-SCREEN END OF BLOCK B1 .
*& DECLARATION OF START-OF-SELECTION
START-OF-SELECTION .
PERFORM SUB_UPLOAD_DATA .
PERFORM SUB_POPULATE_BDC .
PERFORM SUB_ERROR_REC .
*include bdcrecx1.
*&      Form SUB_UPLOAD_DATA
      text
form SUB_UPLOAD_DATA .
DATA : L_FILE TYPE STRING .
     L_FILE = P_FILE .
CALL FUNCTION 'GUI_UPLOAD'
   EXPORTING
     filename                      = L_FILE
     HAS_FIELD_SEPARATOR           = 'X'
   tables
     data_tab                      = T_MK01 .
endform.                    " SUB_UPLOAD_DATA
*&      Form SUB_POPULATE_BDC
      text
form SUB_POPULATE_BDC .
LOOP AT T_MK01 INTO W_MK01 .
DATA : L_MSG TYPE STRING .
REFRESH T_BDCDATA .
perform bdc_dynpro      using 'SAPMF02K' '0107'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-KTOKK'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-KTOKK'
                               W_MK01-KTOKK.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-LAND1'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFA1-NAME1'
                               W_MK01-NAME1.
perform bdc_field       using 'LFA1-SORTL'
                               W_MK01-SORTL.
perform bdc_field       using 'LFA1-PSTLZ'
                               W_MK01-PSTLZ.
perform bdc_field       using 'LFA1-LAND1'
                               W_MK01-LAND1.
perform bdc_dynpro      using 'SAPMF02K' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-KUNNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-LIFNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
CALL TRANSACTION 'MK01' USING T_BDCDATA MODE 'N' MESSAGES INTO T_BDCMSGCOLL .
IF SY-SUBRC <> 0 .
APPEND W_MK01 TO T_ERROR .
ENDIF .
CLEAR W_BDCMSGCOLL .
READ TABLE T_BDCMSGCOLL INTO W_BDCMSGCOLL INDEX 1 .
CLEAR L_MSG .
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
   ID              = W_BDCMSGCOLL-MSGID
   LANG            = SY-LANGU
   NO              = W_BDCMSGCOLL-MSGNR
   V1              = W_BDCMSGCOLL-MSGV1
   V2              = W_BDCMSGCOLL-MSGV2
   V3              = W_BDCMSGCOLL-MSGV3
   V4              = W_BDCMSGCOLL-MSGV4
IMPORTING
   MSG             = L_MSG
EXCEPTIONS
   NOT_FOUND       = 1
   OTHERS          = 2
IF sy-subrc = 0.
WRITE : / 'MESSAGE FOR ' , W_MK01-KTOKK ,'-------' , L_MSG .
ENDIF.
ENDLOOP .
endform.                    " SUB_POPULATE_BDC
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR W_BDCDATA.
W_BDCDATA-PROGRAM = PROGRAM.
W_BDCDATA-DYNPRO   = DYNPRO.
W_BDCDATA-DYNBEGIN = 'X'.
APPEND W_BDCDATA TO T_BDCDATA .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
    CLEAR W_BDCDATA.
    W_BDCDATA-FNAM = FNAM.
    W_BDCDATA-FVAL = FVAL.
    APPEND W_BDCDATA TO T_BDCDATA .
ENDFORM.
*&      Form SUB_ERROR_REC
      text
--> p1        text
<-- p2        text
form SUB_ERROR_REC .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename                        = 'C:/ERRORS OF MK01.TXT'
   WRITE_FIELD_SEPARATOR           = 'X'
tables
    data_tab                        = T_ERROR .
endform.                    " SUB_ERROR_REC
Session Method for MK01:
*& PURPOSE : This BDC report is used to upload all the vendor master
*&           data in to SAP using SESSION METHOD with handling the errors
report Y035_SESSION_METHOD
       no standard page heading line-size 255.
*& Structure declaration
*Structure Declaration for source internal table
TYPES : BEGIN OF TY_UPLOAD,
          LIFNR TYPE RF02K-LIFNR,
          EKORG TYPE RF02K-EKORG,
          KTOKK TYPE RF02K-KTOKK,
          NAME1 TYPE LFA1-NAME1,
          SORTL TYPE LFA1-SORTL,
          LAND1 TYPE LFA1-LAND1,
          SPRAS TYPE LFA1-SPRAS,
          WAERS TYPE LFM1-WAERS,
        END OF TY_UPLOAD.
*& Internal Table declaration
*Internal Table Declaration for source table
DATA : T_UPLOAD TYPE STANDARD TABLE OF TY_UPLOAD INITIAL SIZE 0,
*Internal Table Declaration for bdcdata
       T_BDCDATA TYPE STANDARD TABLE OF BDCDATA INITIAL SIZE 0,
*Internal table declaration for BDCMSGCOLL (To handle the errors)
       T_BDCMSG TYPE STANDARD TABLE OF BDCMSGCOLL,
*Internal table declaration for reprocess the errors
       T_ERRORS TYPE STANDARD TABLE OF TY_UPLOAD INITIAL SIZE 0,
*& Workarea declaration
*Work area delaration for source table
       W_UPLOAD TYPE TY_UPLOAD,
*Work area delaration for bdcdata
       W_BDCDATA TYPE BDCDATA,
*Work area delaration for BDCMSGCOLL
       W_BDCMSG TYPE BDCMSGCOLL.
*& Selection screen declaration
*Selection Screen declaration
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS : P_FLNAME TYPE FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
*& Start of selection declaration
*Start of selection declaration
START-OF-SELECTION.
*Upload the data
PERFORM SUB_UPLOAD_DATA.
*Populate the BDC data
PERFORM SUB_POPULATE_BDC.
*Process the error records
PERFORM SUB_ERROR_RECORD.
*include bdcrecx1.
*&      Form SUB_UPLOAD_DATA
      This subroutine is used to upload the data
FORM SUB_UPLOAD_DATA .
DATA : L_FLNAME TYPE STRING.
L_FLNAME = P_FLNAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = L_FLNAME
FILETYPE                      = 'ASC'
    HAS_FIELD_SEPARATOR           = 'X'
TABLES
    DATA_TAB                      = T_UPLOAD.
ENDFORM.                    " SUB_UPLOAD_DATA
*&      Form SUB_POPULATE_BDC
      This subroutine is used to populate the BDC data
FORM SUB_POPULATE_BDC .
DATA : L_MSG TYPE STRING.
*To oper a sesion in SE35
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
   CLIENT                    = SY-MANDT
   GROUP                     = 'MAMA_SESSION'
   USER                      = SY-UNAME
   KEEP                      = 'X'
   HOLDDATE                 = '20080129'
   PROG                      = SY-CPROG.
LOOP AT T_UPLOAD INTO W_UPLOAD.
REFRESH T_BDCDATA.
perform bdc_dynpro      using 'SAPMF02K'         '0107'.
perform bdc_field       using 'BDC_CURSOR'       'RF02K-KTOKK'.
perform bdc_field       using 'BDC_OKCODE'       '/00'.
perform bdc_field       using 'RF02K-LIFNR'      W_UPLOAD-LIFNR.
perform bdc_field       using 'RF02K-EKORG'      W_UPLOAD-EKORG.
perform bdc_field       using 'RF02K-KTOKK'      W_UPLOAD-KTOKK.
perform bdc_dynpro      using 'SAPMF02K'         '0110'.
perform bdc_field       using 'BDC_CURSOR'       'LFA1-SPRAS'.
perform bdc_field       using 'BDC_OKCODE'       '/00'.
perform bdc_field       using 'LFA1-NAME1'       W_UPLOAD-NAME1.
perform bdc_field       using 'LFA1-SORTL'       W_UPLOAD-SORTL.
perform bdc_field       using 'LFA1-LAND1'       W_UPLOAD-LAND1.
perform bdc_field       using 'LFA1-SPRAS'       W_UPLOAD-SPRAS.
perform bdc_dynpro      using 'SAPMF02K'         '0120'.
perform bdc_field       using 'BDC_CURSOR'       'LFA1-KUNNR'.
perform bdc_field       using 'BDC_OKCODE'       '/00'.
perform bdc_dynpro      using 'SAPMF02K'         '0310'.
perform bdc_field       using 'BDC_CURSOR'       'LFM1-WAERS'.
perform bdc_field       using 'BDC_OKCODE'       '/00'.
perform bdc_field       using 'LFM1-WAERS'       W_UPLOAD-WAERS.
perform bdc_dynpro      using 'SAPMF02K'         '0320'.
perform bdc_field       using 'BDC_CURSOR'       'RF02K-LIFNR'.
perform bdc_field       using 'BDC_OKCODE'       '=ENTR'.
perform bdc_dynpro      using 'SAPLSPO1'         '0300'.
perform bdc_field       using 'BDC_OKCODE'       '=YES'.
*Transfer data to the session
CALL FUNCTION 'BDC_INSERT'
EXPORTING
   TCODE                  = 'MK01'
TABLES
    dynprotab              = T_BDCDATA.
ENDLOOP.
*To close the session
CALL FUNCTION 'BDC_CLOSE_GROUP'.
ENDFORM.                    " SUB_POPULATE_BDC
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR W_BDCDATA.
W_BDCDATA-PROGRAM = PROGRAM.
W_BDCDATA-DYNPRO   = DYNPRO.
W_BDCDATA-DYNBEGIN = 'X'.
APPEND W_BDCDATA TO T_BDCDATA.
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
    CLEAR W_BDCDATA.
    W_BDCDATA-FNAM = FNAM.
    W_BDCDATA-FVAL = FVAL.
    APPEND W_BDCDATA TO T_BDCDATA.
ENDFORM.
*&      Form SUB_ERROR_RECORD
     This subroutine is used to process the error records
         in to a file T_ERRORS
FORM SUB_ERROR_RECORD .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME                        = 'C:\MAMA_ERRORS.TXT'
   WRITE_FIELD_SEPARATOR           = 'X'
TABLES
    DATA_TAB                        = T_ERRORS.
ENDFORM.                    " SUB_ERROR_RECORD
Hope the Explonation and information I had provided will resolve your issue.
Reward points if information is very Helpful.
Have a great day!
Regards,
Krishna Chaitanya
Edited by: Krishna Chaitanya on Apr 7, 2008 4:59 AM

How to check what is the full name of the installer is used?

Hi,
how to check what is the full name of the installer is used?
Thanks,

Very nice, but assuming you did deliberately fire the installer, don't you remember the command? Apart from that your question has (as usual) no version and no platform and no context. If you are still in the installer and using any variant of Unix you can very easily run 'ps' to see the exact command.
You would have needed to provide platform and version information when submitting the SR. Can you explain why you have this forum guess at it?
Sybrand Bakker
Senior Oracle DBA

Doubt : What is the Exact use of Product/SWCV in an integration process?

Hi XI Gurus,
The XI Documentation(Regarding SWCV) says "All design work is organised By SWCV.This makes sense, as interface logically belongs to a Software component Version"
DOUBT 1 :
What is the Exact Use/Role of Product/SWCV in an integration process? - Is it ONLY for DOCUMENTATION purpose? ie., to just understand the underlying Software used ? OR DOES it have a Technical say in the way the Business System behaves ?.
DOUBT 2 :
What will happen if I create a junk Product(I mean something Meaningless), a junk SWCV BUT while creating a Technical System(I choose Type as WEB AS) BASED on the Junk Product/SWCV ,I give VALID hostname etc...I then create a Business System with data valid data .
Now i have created a TS & BS with Valid HOSTNAME & CLIENT etc. BUT based on the junk Product/Junk SWCV.
NOW in integration dir.,will i be able to configure this Business System as Service for Sending IDOCS/FILE(or anything for that matter)?
If It will work then That means The product/SWCV IS ONLY for documentation purpose.Please rply in detail !
DOUBT 3:
When I import the junk SWCV INTO the IntegrationRepository
& choose import of RFC/IDCOC & give valid connection details to a SAP System , Will it import the RFC Regardless of the Junk SWCV I am using ??
DOUBT 4 :
Business System A(Sender) : SAP R/3(For Example)
Business System B(Receiver) : APO (For Example)
ASSUMPTION : Business system A & B have DIFFERENT SWCV.
Now Which Business System's SWCV do I import in my Integration Repository ?The Sender's or Reciever's ?
and Why ??
It would be great if anyone can help me out.
Thanks,
Arun

hi arun..
>>>>>DOUBT 3:
When I import the junk SWCV INTO the IntegrationRepository
& choose import of RFC/IDCOC & give valid connection details to a SAP System , Will it import the RFC Regardless
yes....
>>>>DOUBT 4 :
Business System A(Sender) : SAP R/3(For Example)
Business System B(Receiver) : APO (For Example)
ASSUMPTION : Business system A & B have DIFFERENT SWCV.
Now Which Business System's SWCV do I import in my Integration Repository ?The Sender's or Reciever's ?
and Why ??
...generally, u import only ofr Sender business system cos tht is the system wher u have defined all the objects for the scenario...
and integration process for Receiver is defined..
>>>DOUBT 1 :
What is the Exact Use/Role of Product/SWCV in an integration process? - Is it ONLY for DOCUMENTATION purpose? ie., to just understand the underlying Software used ? OR DOES it have a Technical say in the way the Business System behaves
the product defines the name genaerllly, the SWCV definesd within the product...there can be many SWC in an product...so an SWC is the smallest component in an product...
>>>>>DOUBT 2 :
What will happen if I create a junk Product(I mean something Meaningless), a junk SWCV BUT while creating a Technical System(I choose Type as WEB AS) BASED on the Junk Product/SWCV ,I give VALID hostname etc...I then create a Business System with data valid data .
Now i have created a TS & BS with Valid HOSTNAME & CLIENT etc. BUT based on the junk Product/Junk SWCV.
NOW in integration dir.,will i be able to configure this Business System as Service for Sending IDOCS/FILE(or anything for that matter)?
If It will work then..
...YOU WILL BE ABLE TO.....
REGARDS...
hope it helps...
vishal

What is the exact purpose of Transaction NACE and NAST Table?

Hi All,
What is the exact purpose of Transaction NACE and NAST Table?
Pls help me
Akshitha.

Hi
When a Output type in an apllication doc is configured with a Medium, Partner, Lang and other communication paramters an entry is created in NAST table
so to trigger the output an entry in NAST is compulsory
Output is a link between the Driver Program and the Sapscript,
An output type summarizes messages of the same meaning. It contains parameters that are valid for all its assigned messages, for example appropriate partner functions.
Transmission medium is a medium which the layout will be come out, this may be printout, Fax or Mail
Check this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/19884743b111d1896f0000e8322d00/content.htm
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
Reward points for useful Answers

What is the exact purpose of At New Commanad

What is the exact purpose of At New Commanad.
Ex: At New VBELN
Thanx in Advance.
Akshitha.

Hi Akshitha,
Variant 1
AT NEW f.
Variant 2
AT END OF f.
Effect
f is a field from the field group HEADER . The enclosed sequence of statements is executed if
the field f occurs in the sort key of the extract dataset (and thus also in the field group HEADER ) and
the field f or a superior sort criterion has a different value in the current LOOP line than in the prceding ( AT NEW ) or subsequent ( AT END OF ) record of the extract dataset.
Example
DATA: NAME(30),
      SALES TYPE I.
FIELD-GROUPS: HEADER, INFOS.
INSERT: NAME INTO HEADER,
        SALES INTO INFOS.
LOOP.
AT NEW NAME.
    NEW-PAGE.
ENDAT.
AT END OF NAME.
    WRITE: / NAME, SUM(SALES).
ENDAT.
ENDLOOP.
Notes
If the extract dataset is not sorted before processing with LOOP , no control level structure is defined and the statements following AT NEW or AT END OF are not executed.
Fields which stand at hex zero are ignored by the control break check with AT NEW or AT END OF . This corresponds to the behavior of the SORT statement, which always places unoccupied fields (i.e. fields which stand at hex zero) before all occupied fields when sorting extract datasets, regardless of whether the sort sequence is in ascending or descending order.

What is the domain name setting under internet tcp/ip?

In the airport utility > Internet > TCP/IP panel, what is the 'Domain Name' field used for?

The Domain Name setting would be that of your ISP. For example, I have Cox as my ISP. My Domain Name setting is: cox.net
This field is not mandatory and is used to establish the appropriate domain that your Public IP address is located to assist DNS in directing requests.

Does anyone know what is the exact HDD model and specs for MacBook Pro (15-inch, Mid 2012)? Thanks

Does anyone know what is the exact HDD model and specs for MacBook Pro (15-inch, Mid 2012)? Thanks.

Thanks for responding me,
I just got this info from the link that you provided me but is there any model name or model number for it?
or any 2.5 would be work?
Thanks again.

What is the exact syntax for calling remote function module.

Hi to all
1.....what is the exact syntax for calling remote function module.?
Thanks and regards,
k.swaminath reddy

hi
good
Lets do simple example where you will first create a RFC in one server (say A) and create normal program in othere server (say B). Finally you will call the RFC in A from B.
Do the following steps for creating RFC in server A.
1. log on to server A
2. go to se37
3. Edit -> function groups-> create function group and give the function group name (say ZGRP).
4. create a FM ( say Z_TEST_RFC) in se37 providing the function group which is created just now.
5. go to attribute tab -> choose remote-enabled module from processing type.
so that your FM will become RFC.
6. provide the import parameter in import tab.
we will provide only two import parameters.
- parameter name : P_NUM1, typing: TYPE, associated type : I & check the pass value (all the parameters of RFC must pass by value).
- parameter name : P_NUM2, typing: TYPE, associated type : I & check the pass value
7. provide the export parameter in export tab.
parameter name : P_SUM, typing: TYPE, associated type : I & check the pass value
8. write the given simple code in source code tab.
FUNCTION Z_TEST_RFC.
P_TOT = P_NUM1 + P_NUM2.
ENDFUNCTION.
Do the following steps for creating ABAP program which will call the RFC in server B.
1. se38 - > creat a program.
2. write the given simple code.
data tot type i.
call function 'Z_TEST_RFC' destination 'XXXXXX'
exporting
p_num1 = 10
p_num2 = 15
importing
p_tot = tot.
write tot.
please note that XXXXXX is RFC connection which is avialable in sm59 transaction in server A.
-go to sm59 - > abap connection (list of RFC connection configurations are avialable). choose server B connection and replace it of XXXXXX in the code.
finally you can execute the normal abap program that will call the RFC and display the result.
reward point if helpful.
thanks
mrutyun^

What are the field names for below mentioned

Hello Friends
What are the fields names for below tables
in EKKO
Purchase Document Date
Net Value of the purchase document.
In EKPO
Item Description
From which place We bought it. (It means in Sales Items there we can know from which plant we sold the goods, like in EKPO, there is any field like this)
Please let we are defining the report to find out the stock availability for perticular storage location using select Options plant, company code, material no.
How many tables involve her to build this report. and also field names, they come under which table.
Please send me this information ASAP. PLz Plz Plz..........
Regards
Praveen

You can check the fields of these tables via SE11
Purchase Document Date - EKKO-BEDAT
Item Description - EKPO-TXZ01
Net price per item - EKPO-NETPR.
Regards,
Rich Heilman

What Are the Exact Basic rules for Replying a Thread...... -:) @};-

Hi Experts,
After Looking into the forums many days I had a small conclusion about forums,
SAP Forums are better place I have seen for getting a goo dhelp & Knowledge...
Why can't we make it a BEST Place.
This is just a small doubt which I would like to clear myself first,
I have seen many users In the forums asking for a Basic Questions
When cleared, But still they want to have a Spoon feeding with a Sample Code.
When Sample Code Given they will provide the original code and requests for Modifications.
These always looks to me as crazy.
I have seen somelong time agin by moderators posting that In SCN there will be no SPOON FEEDING.
I am not sure whether if still this Rule AVAILABLE or NOT.
Ok if the task is really difficult let them ask again and again,
And it was not replied, let them repost, I agree with them.
And How about a User Registered in SDN very long back and asking for a silly question in below thread,
[Sendin Email to the recipent list -Need correct FM |Getting the address from shipto partner of Bil. item not directly from C.ma]
This is one more example, really funny, The thread poster needs the solution at any cost, he doesn't require and Suggetions,,, {He Only needs Solution}
[Radio Buttons |Radio Buttons;
[Turning Off Debugger |Turning Off Debugger;
[Regarding Amount in words|Regarding Amount in words;
There are 100's of threads like this....Everyone knows this facts.
Check this who answered this one and who replied correct answer, who copied, finally who was rewarded...!
[how to validate POsting period |Re: how to validate POsting period]
Now My Real Problem is....!
User is always intelligent, Only the weakness is in Contributor, trying to help them,..,
And I openly say that Someone requesting for basic help is not DUMB, But the Contributor replying forgets
the basic rules " Why Contributing ?"
According to me It's not the Requestor to see Rules & Requlations before posting the threads,
But its responsibilty for the Contributing person to see th Rules & Requlations before replying the threads,
If we follow the rules and stand on a single word or rule or anything there will be Good Result.
Major Problem is in US not anyone else.
Example Some one saying search in the forum,,, then please no replies after that...
But we are very pity hearted again we post the solution,,,
But it is not at all enough(for cintribtor's)... they will copy the solution and post again by slight Modifications,
And Some users are having 500,600,700,800 Posts with 0 points, registered long long back.
They are completly dependent on forums,,, As they goto office and as they eat, The same they open forums and ask Queries...
They will never realize what they are doing,, and we will never let them improve better...
Finally Lets Discuss About this and Correct & Suggest me if I am wrong,
Is my thoughts are going in the right way or not I am not even sure... Please Aslo Correct me if I did any mistakes.
Thanks & regards,
Dileep .C
Edited by: Dileep Kumar Chinnaiah on Apr 29, 2009 12:33 PM
Title Changed Form
"What to do when someone asking for Basic Questions" to "What Are the Exact Basic rules for Replying a Threads...... "

Hi Stephen,
Very useful Information,
First tell me a little something about my self...
After completion of my certification(as a fresher) I was down the streets hunting the job,
with the insufficient knowledge and being a non-experienced person, I never got one.
And mean while when I got my "S-UserID", I used to be proud, To say frankly, I registerd in SDN & SAP all at a time, without even knowing what I can do there..,
When I got a job afterwords I was doing the job and never seen SDN page for many months,
when I came to know that of we have doubts we can post at SDN. then started requesting help,
I posted only a little, I didnot got the proper response. on that day I decided,
still there are some places where we cannot get help on time and there will be people waiting to get help,
Why cant I put some of my efforts to help others.
Then I searched some topic by Topic in SDN topic by Topic I used to read threads just for knowledge.
when I feel my self comfort for contributing, I started contibuting...!
If you haven't read it, take a look first, so you can understand where things are now.
I dont know where things are now. But these in this thread I mentioned clearly what I seen from the day I started contributing.
I searched with the terms of 'Rules for replying', The results are not as I expected, and this link has subject as
"O SDN, where art thou?" So it dosent hit my in the list.
Like everybody until a certain stage I am also rushing for points.
But I most cases I never tried to copy paste answers. If I done some then that is just to point it myself some day,
I have no hopes or no intrest on the points...! This was discussed with Rob & Matt, at my inital contribution where my points are 36.
From that day till date I have changed a lot to myself.
Everyone cannot change like me because they are not like me & And I dont even expect that...!
I will be online almost 6-8Hrs a day, Not even getting intrest to see the forums just because of the co-contributors.
My only point is I am just requesting to a co-contributor,
Clearly In a example : Lets say contributor has replied to a thread, and if you know that is a correct solution,
please dont reply any more, If you have a better solution than that, then only reply,
Even there is one reply in the thread not a matter, if correct answer leave that query.
If still error persists, Show up with your Idea's...
Dont let down the contributor, by copying his reply and editing and pasting(edit only if incorrect).
I am just looking for this one exactly to circulate between ourselfs.
For this we a little support from moderators to circulate(may be as a rule or may be as a mail to them)
You may say again how many mails we have to send, It dosent matter, one mail to one person one time,
and +ve factors will show up definetly.
A real contributor always understand what I am talking about, but some one who hunts for points will never.
I am really sorry if I am troubling with my doubts & requests,
If so, Pleae forgive me,,
Thanks & regards,
Dileep .C

What is the exact name of my ISP?

Similar Messages

Maybe you are looking for