What is the exact use of 'Day Balance' and 'Period Balance'??

Hi All,
Can any body give me a detail and exact description about 'Day Balance' and 'Period Balance' fields used under 'Base Emtitlement' subtree option of V_T559L.
Thanks,
Swapnil
PS : Points will be rewarded for helpful answers...!

1. First one has to understand that R3 is OLTP system purely used for transactin processing while BW is used for OLAP ie reporting purpose only. At a table level if we do not have a redundant second table the R3 system will be over loaded when the OLTP & the OLAP systems access the same table for their respective purposes. So we have to take data from the document table with a time lag and put into the statistical tables so that BW will get the data as and when required.
2. This question is related to 1 and the above answers both.
3. V3 is a generic process and is used for data extraction from the R3 transaction tables and can be used for any system as such.
4. Both the processes are independent of each other and there is no relationship.
Hope this helps
Cheers
Viva
Assign points if this helps.

Similar Messages

Doubt : What is the Exact use of Product/SWCV in an integration process?

Hi XI Gurus,
The XI Documentation(Regarding SWCV) says "All design work is organised By SWCV.This makes sense, as interface logically belongs to a Software component Version"
DOUBT 1 :
What is the Exact Use/Role of Product/SWCV in an integration process? - Is it ONLY for DOCUMENTATION purpose? ie., to just understand the underlying Software used ? OR DOES it have a Technical say in the way the Business System behaves ?.
DOUBT 2 :
What will happen if I create a junk Product(I mean something Meaningless), a junk SWCV BUT while creating a Technical System(I choose Type as WEB AS) BASED on the Junk Product/SWCV ,I give VALID hostname etc...I then create a Business System with data valid data .
Now i have created a TS & BS with Valid HOSTNAME & CLIENT etc. BUT based on the junk Product/Junk SWCV.
NOW in integration dir.,will i be able to configure this Business System as Service for Sending IDOCS/FILE(or anything for that matter)?
If It will work then That means The product/SWCV IS ONLY for documentation purpose.Please rply in detail !
DOUBT 3:
When I import the junk SWCV INTO the IntegrationRepository
& choose import of RFC/IDCOC & give valid connection details to a SAP System , Will it import the RFC Regardless of the Junk SWCV I am using ??
DOUBT 4 :
Business System A(Sender) : SAP R/3(For Example)
Business System B(Receiver) : APO (For Example)
ASSUMPTION : Business system A & B have DIFFERENT SWCV.
Now Which Business System's SWCV do I import in my Integration Repository ?The Sender's or Reciever's ?
and Why ??
It would be great if anyone can help me out.
Thanks,
Arun

hi arun..
>>>>>DOUBT 3:
When I import the junk SWCV INTO the IntegrationRepository
& choose import of RFC/IDCOC & give valid connection details to a SAP System , Will it import the RFC Regardless
yes....
>>>>DOUBT 4 :
Business System A(Sender) : SAP R/3(For Example)
Business System B(Receiver) : APO (For Example)
ASSUMPTION : Business system A & B have DIFFERENT SWCV.
Now Which Business System's SWCV do I import in my Integration Repository ?The Sender's or Reciever's ?
and Why ??
...generally, u import only ofr Sender business system cos tht is the system wher u have defined all the objects for the scenario...
and integration process for Receiver is defined..
>>>DOUBT 1 :
What is the Exact Use/Role of Product/SWCV in an integration process? - Is it ONLY for DOCUMENTATION purpose? ie., to just understand the underlying Software used ? OR DOES it have a Technical say in the way the Business System behaves
the product defines the name genaerllly, the SWCV definesd within the product...there can be many SWC in an product...so an SWC is the smallest component in an product...
>>>>>DOUBT 2 :
What will happen if I create a junk Product(I mean something Meaningless), a junk SWCV BUT while creating a Technical System(I choose Type as WEB AS) BASED on the Junk Product/SWCV ,I give VALID hostname etc...I then create a Business System with data valid data .
Now i have created a TS & BS with Valid HOSTNAME & CLIENT etc. BUT based on the junk Product/Junk SWCV.
NOW in integration dir.,will i be able to configure this Business System as Service for Sending IDOCS/FILE(or anything for that matter)?
If It will work then..
...YOU WILL BE ABLE TO.....
REGARDS...
hope it helps...
vishal

What is the exact use of Sequence container

Hi all,
I am intermediate in SSIS package,i am not understanding what is the exact use of Sequence container ?
I am preparing for interview(3 years exp), if experts dont mind can you pls share some tips and questions to clear the interview ?
pls
thanks

Hi SelvakumarSubramaniam,
This blog delivers a good summary of the benefits we can get by using Sequence Container:
Easier debugging by allowing you to disable groups of tasks to focus package debugging on one subset of the package control flow.
Managing multiple tasks in one location by setting properties on a Sequence Container instead of setting properties on the individual tasks.
Provides scope for variables that a group of related tasks and containers use.
Create a transaction around all the components inside the container.
Here are some other good resources:
http://www.phpring.com/sequence-container-in-ssis/
http://sql-developers.blogspot.com/2010/06/sequence-container-in-ssis.html
Regards,
Mike Yin
TechNet Community Support

What is the exact use of statistical updates in V1,V2 and V3

Hi,
Can anyone answer me some questions.
1. what is the exact use of statistial update in V1,v2 and V3. If data is same in both document update and statistical update the why u need a second table with redundant data.
2. When BW extracts data is it recommended to extract from statistical tables or document updated tables.(i read that statistical updation is tailored for reporting)
3. Is V3 applicable only when BW extracts data from R/3.
4.In case of V3 the initialization of updates are done from BW side or R/3 side. i mean is there any relationship between scheduling of dataloading using an infopackage in BW and the V3 process taking place in R/3

1. First one has to understand that R3 is OLTP system purely used for transactin processing while BW is used for OLAP ie reporting purpose only. At a table level if we do not have a redundant second table the R3 system will be over loaded when the OLTP & the OLAP systems access the same table for their respective purposes. So we have to take data from the document table with a time lag and put into the statistical tables so that BW will get the data as and when required.
2. This question is related to 1 and the above answers both.
3. V3 is a generic process and is used for data extraction from the R3 transaction tables and can be used for any system as such.
4. Both the processes are independent of each other and there is no relationship.
Hope this helps
Cheers
Viva
Assign points if this helps.

What are dyanmic internal tables and what s the exact use of forall entries

what are dyanmic internal tables and what s the exact use of forall entries?

hi,
dynamic internal table.
http://searchsap.techtarget.com/tip/1,289483,sid21_gci912390,00.html
http://www.sap-img.com/ab030.htm

FOR ALL ENTRIES is an effective way of doing away with using JOIN on two tables.
You can check the below code -
SELECT BUKRS BELNR GJAHR AUGDT
FROM BSEG
INTO TABLE I_BSEG
WHERE BUKRS = ....
SELECT BUKRS BELNR BLART BLDAT
FROM BKPF
INTO TABLE I_BKPF
FOR ALL ENTRIES IN I_BSEG
WHERE BUKRS = I_BSEG-BUKRS
AND BELNR = I_BSEG-BELNR
AND BLDAT IN SO_BLDAT.
*******************************8
look another example
what is the use of FOR ALL ENTRIES
1. INNER JOIN
DBTAB1 <----
> DBTAB2
It is used to JOIN two DATABASE tables
having some COMMON fields.
2. Whereas
For All Entries,
DBTAB1 <----
> ITAB1
is not at all related to two DATABASE tables.
It is related to INTERNAL table.
3. If we want to fetch data
from some DBTABLE1
but we want to fetch
for only some records
which are contained in some internal table,
then we use for alll entries.
1. simple example of for all entries.
2. NOTE THAT
In for all entries,
it is NOT necessary to use TWO DBTABLES.
(as against JOIN)
3. use this program (just copy paste)
it will fetch data
from T001
FOR ONLY TWO COMPANIES (as mentioned in itab)
4
REPORT abc.
DATA : BEGIN OF itab OCCURS 0,
bukrs LIKE t001-bukrs,
END OF itab.
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
itab-bukrs = '1000'.
APPEND itab.
itab-bukrs = '1100'.
APPEND itab.
SELECT * FROM t001
INTO TABLE t001
FOR ALL ENTRIES IN itab
WHERE bukrs = itab-bukrs.
LOOP AT t001.
WRITE :/ t001-bukrs.
ENDLOOP.
Hope this helps!
Regards,
Anver

What is the exact purpose of Transaction NACE and NAST Table?

Hi All,
What is the exact purpose of Transaction NACE and NAST Table?
Pls help me
Akshitha.

Hi
When a Output type in an apllication doc is configured with a Medium, Partner, Lang and other communication paramters an entry is created in NAST table
so to trigger the output an entry in NAST is compulsory
Output is a link between the Driver Program and the Sapscript,
An output type summarizes messages of the same meaning. It contains parameters that are valid for all its assigned messages, for example appropriate partner functions.
Transmission medium is a medium which the layout will be come out, this may be printout, Fax or Mail
Check this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/19884743b111d1896f0000e8322d00/content.htm
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
Reward points for useful Answers

What is the exact diff between At New and On Chnage

hello all
what is the exact diff between At New and On Chnage in control breaks statements. and when shall we go for At new & when shall we go for On change on events.
Plz tell with with some code.

Hi ,
Using at new
Each time the value of c changes, the lines of code between at new and endat are executed. This block is also executed during the first loop pass or if any fields to the left of c change. Between at and endat, the numeric fields to the right of c are set to zero. The non-numeric fields are filled with asterisks (*). If there are multiple occurrences of at new, they are all executed. at end of behaves in a similar fashion.
Using the on change of Statement
Another statement you can use to perform control break processing is on change of. It behaves in a manner similar to at new.
The following points apply:
u2022     If the value of any of the variables (v1, v2, and so on) changes from one test to the next, the statements following on change of are executed.
u2022     If no change is detected and else is specified, the statements following else are executed.
on change of differs from at new in the following respects:
u2022     It can be used in any loop construct, not just loop at. For example, it can be used within select and endselect, do and enddo, or while and endwhile, as well as inside get events.
u2022     A single on change of can be triggered by a change within one or more fields named after of and separated by or. These fields can be elementary fields or field strings. If you are within a loop, these fields do not have to belong to the loop.
u2022     When used within a loop, a change in a field to the left of the control level does not trigger a control break.
u2022     When used within a loop, fields to the right still contain their original values; they are not changed to contain zeros or asterisks.
u2022     You can use else between on change of and endon.
u2022     You can use it with loop at it where . . ..
u2022     You can use sum with on change of. It sums all numeric fields except the one(s) named after of.
u2022     Any values changed within on change of remain changed after endon. The contents of the header line are not restored as they are for at and endat.
Regards,
KV

What is the exact difference between Purchse order and purchase requisition

Hi all,
What is the exact difference between Purchse order and purchase requisition.
Thx

Hi,
Purchase Requisition-> Staff in an orgn places Pur requisition for want of some goods/products - ME51
Related Table EBAN
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
Purchase Order(PO)-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Tables:EKKO,EKPO
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Vendor, Material ,Qty are mandatory for PO.
Regards,
Padmam.

What is the main use of pooled talbe and where are they use?

Hi gus:
         Can somebody tell me what is the main use of pooled table and where are they use,thanks!
        Regards
         Jerry
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Sep 1, 2009 9:11 AM

Hi,
Table pools are special table types in the ABAP Dictionary. The data from several different tables can be stored together in a table pool or table cluster. Tables assigned to a table pool or table cluster are referred to as pooled tables or cluster tables.
This table are similar to the CLUSTER table types but these work on "LINEAR SEARCH" while CLUSTER TABLE uses "BINARY SEARCH to retrieve the data from the various tables and thsi is mainly used in the logical databases "LDB's" used in HR or ABAP-HR.
A table in the database in which all records from the pooled tables assigned to the table pool are stored corresponds to a table pool.
The definition of a pool consists essentially of two key fields (Tabname and Varkey) and a long argument field (Vardata).
Table Clusters Several logical data records from different cluster tables can be stored together in one physical
record in a table cluster.
A cluster key consists of a series of freely definable key fields and a field (Pageno) for distinguishing continuation records. A cluster also contains a long field (Vardata) that contains the contents of the data fields of the cluster tables for this key. If the data does not fit into the long field, continuation records are created. Control information on the structure of the data string is still written at the beginning of the Vardata field.
Regards,
Samad.

What is the exact difference between Database Cloning and Database Refresh?

Hi,
Can anybody tel me the exact difference between Database Cloning and Database Refresh?
I Have some conflicts in these topics.
Thanks
Rajesh

Refresh is what it says, "refresh" . You have a main site which would always have the data being inserted into it. There would be another site which would remain some where else . This site needs to be refreshed with the primary site. So you need to do export from the primary, push it to the secondary site and done!
HTH
Aman....

What's the exact use of GNS(Grid Naming Server) ???

Hi,
I have doubt that what's the use of GNS ? What's the logic behind GNS ? Can we use DNS in stead of GNS ( I assume that probably we can use DNS in place of GNS as GNS is sub domain of DNS ). The last question : Can we use GPNP without GNS ?
Regards,
Dheeraj Vaish

It means that GNS is sub-domain of DNS and DNS delegates the request to GNS. Now As per me :
1. We can directly use DNS (if we don't want to use GPnP and only want to use SCAN using DHCP and DNS), what would be drawback (cons) in this method for not using GNS .
2. We can not use GPnP withous setting us GNS (Please correct me if I am wrong). So DHCP, DNS,GNS all are mandatory for GPnP .
Kindly suggest.
Regards,
Dheeraj vaish

What does the text used for in Sales and Distribution?

In Sales and Distribution, we enter the text for customer master, sales order, delivery document, billing document. what is the main purpose of the text? Where can it be displayed?

Hi Lili,
For the fallowing purpose you can use the text.
-->Shipping Instructions
-->Warrenties
-->Terms of delivery
-->Order conformation details
-->Product ctelogs
-->Handling details
-->Packing details
-->LR no details.
-->Transaporter details.
Some data if you want in the output of the sales documents you can maintain in text tab then you can capture that in to output.
I hope it will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Jul 7, 2008 6:32 AM

What is the exact use of STRUTS frame work??

Hi every one,
I'm new to this STRUTS frame work. Can any one explain me in detail (if possible with an example) about,, why we need to use STRUTS framework as we have already JSP's.
For example if we want to move from one JSP to another JSP, it is quite easy to move to the page with out any other extra logic. Where as comes to the point of STRUTS, we need to write, JSP form, Form-bean class, Action Class, configure our STRUTS XML file, if validation needed validation xml files. Is it not looking cumbersome to process?
Please help me to recover from this...
Expecting reply from many of you..
Thanx in advance.
Sriram

meetshriram wrote:
Hi every one,
I'm new to this STRUTS frame work. Can any one explain me in detail (if possible with an example) about,, why we need to use STRUTS framework as we have already JSP's. Struts is a web MVC-2 framework.
For example if we want to move from one JSP to another JSP, it is quite easy to move to the page with out any other extra logic. No, there's logic, and it's embedded into the page.
It's fine for one page to another, but when you have a substantial application that has tens or hundreds of JSPs it's much harder to manage.
Where as comes to the point of STRUTS, we need to write, JSP form, Form-bean class, Action Class, configure our STRUTS XML file, if validation needed validation xml files. Is it not looking cumbersome to process?
Extra complexity does cost you something. Ask yourself what it's buying you: better layering, more configuration and less code, validation, etc.
%

PCI 6036E/SC 2075, can read only from ch 2,what are the ports used for ch 1 and ch 2

in VB, using measurement studio. I am using CWAI. how to specify which channel to read from. right now, it is reading from ch 2 without me specifying it. thanks

Benje001,
Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
Hope that helps!
Regards,
Shannon R.
Applications Engineer
National Instruments

What is the exact procedure of SNOTE implementation(step by step)

Hello Friends,
I have 2 system landscape (DEV/QAS and PRD)
DEV.100/QAS.200 are in one system and PRD is as separate system..
Now want to implement SNOTE in two system landscape.
If you implement SNOTE, is it implemented in all clients..????
Above two systems are Solution Manager 4.0. SP16.
Please give me step by step...
regards,
gandalf.

If i want to implement SNOTE, i need SAP transport layer ..????
Because my DEV/QAS are in same system and PRD is separate system....
If DEV client /QAS client are in same system and PRD is separate system, you need SAP transport layer. for this two system landscape ??????????????????????
What is the exact use SAP transport layer
( i know that SAP transport layer is used only for SAP standard objects and also it is configured between DEV system and QAS system, if both systems are different)
IF DEV/QAS are in same system there is no need of configuring SAP transport layer between DEV client and QAS client.
Please advice.
regards,
gandalf.

What is the exact use of 'Day Balance' and 'Period Balance'??

Similar Messages

Maybe you are looking for