What is the expected behavior in a zone after adding a new static route in Solaris 10....

Hi Folks,
I have a few Solaris 10 production machines here at work and had a strange thing happen. I added a new route to these machines using the "add route <destination > <gateway>" command and my web applications running in the zones on these machines froze up. The applications that froze had no reason to do this as they have never talked to the machine in this new route. Here is the old route table via netstat -rn:
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
172.23.248.0 172.23.248.24 U 1 6794 bge1
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.74 U 1 7980 bge0
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 34
172.28.0.0 172.23.248.100 UG 1 9
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 44
172.26.0.0 172.23.248.100 UG 1 934
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 82
172.23.0.0 172.23.248.100 UG 1 161975
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 82
10.0.0.0 172.23.248.100 UG 1 1766
224.0.0.0 204.154.129.74 U 1 0 bge0
default 204.154.129.1 UG 1 8411
127.0.0.1 127.0.0.1 UH 225713773 lo0
Here is the route table after I added my one additional route (note the top line):
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
204.154.129.209 172.23.248.100 UGH 1 5
172.23.248.0 172.23.248.28 U 1 5757 bge1:3
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.86 U 1 484 bge0:2
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 114
172.28.0.0 172.23.248.100 UG 1 2
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 43
172.26.0.0 172.23.248.100 UG 1 944
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 77
172.23.0.0 172.23.248.100 UG 1 160823
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 0
10.0.0.0 172.23.248.100 UG 1 183
224.0.0.0 204.154.129.86 U 1 0 bge0:2
default 204.154.129.1 UG 1 1850
127.0.0.1 127.0.0.1 UH 58 225894 lo0:3
My question is why did my application die and need to be restarted after this one simple route was added? What is the expected behavior in a zone after adding a new route to the root zone?
Thanks,
Tom Gellert
tom.gellert&#64;tellabs.com

Greg- Dreamweaver CS4/Live View integration with BrowserLab allows you to send interactive states of a local site/design directly to BrowserLab (dynamic data, rollover/mouse interaction states, widget states, et al), and from behind firewalls no less- definitely a scenario we covered.  You can get the extensions (which require Dreamweaver CS4, of course) up on the Labs site: http://labs.adobe.com/technologies/browserlab/

Similar Messages

  • What is the expected behavior in iOS 7 when hitting send on an email with no wifi or cell connection being present?

    What is the expected behavior in iOS 7.x when hitting send on an email with no wifi or cell connection being present? Also is the behavior designed to be any different if the user intiates airplane mode ahead of time?
    We have a couple of users that claim in this situation the email will act like it sent in which they expect it will go out once a network connection is restored.  They then come to find the recipient never recieved it and that it does not show in sent email.  Its merely lost and they claim its also not in drafts.
    I would hope the expected behavior would be that it would either retry sending once network connectivity is restored or at least warn that it needs to be saved as a draft since no connection is present.

    It should show "X unsent messages" at the bottom of the mail app.
    It also should create an outbox where the unsent emails will queue up, but this could also vary on the email provider.
    Once you re connect to a network, it should just send the messages

  • What is the expected behavior of IDM, if crashes during Workflow processing

    hi, We have a Task to nightly export of all the IDM users. We noticed that if the server dies halfway through the process, the Task is not picked off from where it left. How do we deal with such situations. We wanted it to restart the export process and not wait for next nights schedule. Is there a programmatic way to do it in IDM?

    It should show "X unsent messages" at the bottom of the mail app.
    It also should create an outbox where the unsent emails will queue up, but this could also vary on the email provider.
    Once you re connect to a network, it should just send the messages

  • If JailbreakDetectionRequirements are set on a PlayRight, what is the expected outcome on a PC/Mac?

    I'm curious if I need to make our license server look at the incoming client information and conditionally turn this on.
    If a license with jail break detection turned on is sent to a PC or Mac, what is the expected behavior? I assume that you'd allow playback since those devices can't really be 'jailbroken', but it would be great to have some clarification.

    The jailbreak detection won't do anything for PC and Mac. It's just for mobile devices, like iOS and Android devices.
    Thanks,
    -- Hiroshi

  • What is the expected Passbook behavior?

    What should Passbook do when you open it?
    I do not get errors like I saw in some of the other posts, but given all the marketing it received, I am left wondering if it works properly.
    Perhaps nothing happens until I actually make a ticket purchase or store a coupon?
    Here is what I see when I try to use it:
    1) I open the Passbook app.
    2) I see an info page that basically just describes what Passbook is for, and has an "App Store" button at the bottom.
    3) I click "App Store" and see a handful of Apps, of which I've downloaded 4-5.
    ** The apps just installed on to my phone like any other app... nothing obvious stands out as Passbook specific.
    4) I go back to Passbook, and it looks exactly the same as before... an info page with an App Store button.
    Alright, well I assume it's not as broken as it feels and that purchasing a ticket will cause something to change in the Passbook UI.
    So am I right about that?
    I really think there should be a help button, or that I should be able to slide over to some explanation page describing the expected behavior.
    Or maybe something simple like: "You have no tickets", to clue me into what the deal is. 
    (unless it really is just broken)
    -Brian

    Thanks, I downloaded the Target App to test out your suggestion and it worked like you described.
    The other apps I installed did not have coupons or anything for me too see an "Add to Passbok" option and understand the intent.

  • What is the expected release date for Adobe Media Server 5.0 and Adobe Access 4.0 ?

    What is the expected release date for Adobe Media Server 5.0 and Adobe Access 4.0 ?

    you should be on the same subnet as the server in order to receive multicast.

  • What is the expected battery life of a macbook air?

    What is the expected battery life in hours of a Macbook Air?   I have a 2012 model and it is only about 1 1/2 hours. 

    About 1,000 full charge cycles. Mac notebooks- Determining battery cycle count - Apple Support.

  • What's the correct behavior in Win8.1/Win10, when VOIP is conecting and then press Power to enter into connect standby?

    what's the correct behavior in Win8.1/Win10, when VOIP is conecting -> then press Power to enter into connect standby? does VOIP need disconnect after press power key?
    test steps is :
    1). Start VOIP call with Metro Skype in win8.1 or win10.
    2). System enter Connect standby (by press power button)during VOIP establish by Skype or LYNC.
    does VOIP need disconnect or still in connection? what's the correct behavior in win8.1/win10.

    Hi wangjingz,
    From your post, it would be better ask this to the WDK and driver development forum. This forum discuss  application compatibility testing, common compatibility issues, and best practices for creating Windows-based applications. So your post is off
    topic here. Thanks for your understanding.
    Best regards,
    Shu Hu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Laserjet 42x0/43x0 printers: what is the expected life span by page count for these models?

    Laserjet 42x0/43x0 printers: what is the expected life span by page count for these models?

    The document here lists the monthly duty cycle at 125,000 to 200,000 pages per month and the devices typically have a one year warranty.  Based on this I would expect at least 1.4 - 2.4 million pages for printer life with appropriate maintenance.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • What is the expected service life of our HP Color LaserJet 2840?

    What is the expected service life of our HP Color LaserJet 2840? Currently it's been running well however I'd like to know how long we should expect it to operate.
    We intend to use this printer as long as it's serviceable before we consider a replacement machine. Please, no sales answers!
    Thank you in advance for your reply.

    Has your son been calibrating the battery per the user manual schedule?  Has he been using the computer properly? According to the user manual it states in part:"Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings."
    MacBook Pro: Care, Use, and Safety Information
    "Do not place your MacBook Pro on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn."
    Apple notebook batteries – maintenance and troubleshooting
    http://support.apple.com/kb/HT1446 Apple Portables: Tips for maximizing your battery charge
    http://support.apple.com/kb/HT1490 Apple Portables: Calibrating your computer's battery for best performance
    Maximize the battery life

  • What is the expected useful life of a new iMac?

    What is the expected useful life of a new iMac?

    There are few if any life-limited components in new Macs.
    In very approximate terms Macs become unsupported after about five years and functionally obsolete in about seven years. This has held true since about 1984 (my first Mac still works). Buy as much RAM as you can afford.

  • What is the first step of an abaper after getting the FDS

    what is the first step of an abaper after getting the Functional Document ?what we have to do? how to analyze it , and how to face such interview questions on FDS TDS . any resource available.

    Hi,
    After getting the FDS , first understand the functionality of the requirment or take the help of the functional consultant and then start preparing TS ( TEchnical Specification) and do coding  and get your doe reveirewed and prepare test cases and do testign in sand box and quality environment and after having got the confrimation that the requirment is met then port it to production.
    Regards,
    Irfan
    Note: Please award helpful answers.

  • What is the best way to migrate PSE6 Catalog (Wxp) to new computer W7, PSE11?

    What is the best way to migrate PSE6 Catalog (Wxp) to new computer W7, PSE11?  Previous PSE6 recovery (Wxp) after a failed HD resulted in pictures showing but not opening due to connection issues.  Had to restore pictures from backup and rebuild the catalog and albums.  Found a third party fix afterwards that has no support past PSE8.  Trying to make this migration to PSE11 painless.

    William47 wrote:
    What is the best way to migrate PSE6 Catalog (Wxp) to new computer W7, PSE11?  Previous PSE6 recovery (Wxp) after a failed HD resulted in pictures showing but not opening due to connection issues.  Had to restore pictures from backup and rebuild the catalog and albums.  Found a third party fix afterwards that has no support past PSE8.  Trying to make this migration to PSE11 painless.
    That's a very common and classical situation :
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html
    Just make sure that your backup to the external drive is ok : you should find a 'backup.tly' file in the folder.
    Use the PSE11 organizer to restore from the PSE7 backup : the first step restores all your media files, the second automatically does a catalog conversion to the PSE11 format.
    Read the note in the above link about restoring from XP to ulterior Win OS. You can also restore to a 'custom' location. For instance in a 'C:\My new library' folder. Make sure that master folder is accessible to all users, and if you want, you can move the catalog (database) itself from that location to the default location : catalog manager, option to move catalogs to location accessible to all users.

  • What is the proper way to reinstall iTunes after error 42404 without losing all my music?

    What is the proper way to reinstall iTunes after error 42404 without losing all my music?

    Here's what I do when I have iTunes problems and it works 9 out of 10 times.  I have Ccleaner; It's a wonderful tool to have.  If you don't have it, google it and install it, just the free version.  You'll see the list of all of your installed programs in there to unstall (among of a host of other things you could do with that program) but anyway, right click on Apple Software first to repair, when done then right click on Apple Application Support to repair, then when done with that, right click on iTunes to repair that and all should be well after that.  No uninstall should be necessary at all when you do all that.

  • Hi sir / madam  i have done my b.tech in mechanical and automation. now i am planning to join sap mm module. tell me it will help me to groom my future. what are the job opportunites as in fresher after doing this course. from where should i do it

    i have done my b.tech in mechanical and automation. now i am planning to join sap mm module. tell me it will help me to groom my future???
    what are the job opportunites as in fresher after doing this course.  which is the best insititute for this course??

    Hi Nishant,
    Welcome to SCN.
    Questions like these have been asked many times in these forums. I suggest you search for relevant information and if you are not satisfied, then post a specific question.
    Also, spend some time reading the The SCN Rules of Engagement
    pk

Maybe you are looking for