What is the expected SWF to AVI file size ratio?

I have a 3.5 minute movie that is mainly stills and voice over. The published swf is 3.4 Mb.
When I publish it to AVI, it comes out at:
260 Mb using Cinepak codec
2,500 Mb using MJPEG compressor
3,000 Mb using Microsoft Video 1
Is this expected behavior?
Is there anyway to reduce these?
Thanks

From reading http://blogs.adobe.com/captivate/2009/03/tips_for_publish_to_avi_in_ado.html I discovered that the XviD Codec is one of the better ones. This results in a filesize of 60Mb (using the same Captivate project).
Hope this is of use to some people!

Similar Messages

What's the best way to decide file size to fit my large video on a DVD?

I have a video that's over 2 hours. What's the best way to figure out what bit rate to use for the audio/video tracks?
Thanks,
-------------S

Steve
You can use this online * Bitrate Calculator * and/or download [* BitBudget *|http://www.recipe4dvd.com>.
Don't forget to encode your audio to Dolby 2 (AC3).
Hope that helps !
Alberto
Message was edited by: Silal

What is the diff b/w flat file and legacy system?

Hi everyone,
when v say v r working on scenario FILE to FILE? which format of file r v usually working on? and what is the diff b/w flat file and legacy system?
thanx

Hi,
when v say v r working on scenario FILE to FILE? which format of file r v usually working on?
>>>Many a times it will be a Flat file with CSV format,Tab delimited format, fixedlength fields.
what is the diff b/w flat file and legacy system?
>>>We can not differeniate like this..
Flat file may come from any systems, it may be live system or legacy system.
Legacy system- is something like old, or past one. If you talk about SAP , then older versions of SAP can be called as a legacy system.
So it may be a file system, or any system which is old version but it doesnot mean it is not in use,
Regards,
Moorthy

What is the expected behavior in a zone after adding a new static route in Solaris 10....

Hi Folks,
I have a few Solaris 10 production machines here at work and had a strange thing happen. I added a new route to these machines using the "add route <destination > <gateway>" command and my web applications running in the zones on these machines froze up. The applications that froze had no reason to do this as they have never talked to the machine in this new route. Here is the old route table via netstat -rn:
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
172.23.248.0 172.23.248.24 U 1 6794 bge1
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.74 U 1 7980 bge0
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 34
172.28.0.0 172.23.248.100 UG 1 9
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 44
172.26.0.0 172.23.248.100 UG 1 934
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 82
172.23.0.0 172.23.248.100 UG 1 161975
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 82
10.0.0.0 172.23.248.100 UG 1 1766
224.0.0.0 204.154.129.74 U 1 0 bge0
default 204.154.129.1 UG 1 8411
127.0.0.1 127.0.0.1 UH 225713773 lo0
Here is the route table after I added my one additional route (note the top line):
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
204.154.129.209 172.23.248.100 UGH 1 5
172.23.248.0 172.23.248.28 U 1 5757 bge1:3
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.86 U 1 484 bge0:2
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 114
172.28.0.0 172.23.248.100 UG 1 2
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 43
172.26.0.0 172.23.248.100 UG 1 944
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 77
172.23.0.0 172.23.248.100 UG 1 160823
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 0
10.0.0.0 172.23.248.100 UG 1 183
224.0.0.0 204.154.129.86 U 1 0 bge0:2
default 204.154.129.1 UG 1 1850
127.0.0.1 127.0.0.1 UH 58 225894 lo0:3
My question is why did my application die and need to be restarted after this one simple route was added? What is the expected behavior in a zone after adding a new route to the root zone?
Thanks,
Tom Gellert
tom.gellert@tellabs.com

Greg- Dreamweaver CS4/Live View integration with BrowserLab allows you to send interactive states of a local site/design directly to BrowserLab (dynamic data, rollover/mouse interaction states, widget states, et al), and from behind firewalls no less- definitely a scenario we covered. You can get the extensions (which require Dreamweaver CS4, of course) up on the Labs site: http://labs.adobe.com/technologies/browserlab/

What is the exact problem with this file?

Hi all,
There is an old form , which was not in use from many days.
Now when we tried to run the form, i got the error saying "FRM-40734:Internal Error:Pl/SQL error occured.", in the login form.
When i tried to open the fmb file in Oracle Forms Builder 6i, i got the following error:
FRM-10102: Cannot attach PL/SQL library d2kwutil. This library attachment will be lost if the module is saved., but the fmb file got open.
The login button has the following code:
DECLARE
UNAME VARCHAR2(30);
--USER_ID PARAMLIST;
V_USER APUSERMA.USER_NAME%TYPE;
V_PASSWED APUSERMA.USER_PASSWD%TYPE;
BEGIN
select user_CD INTO :GLOBAL.USER_ID from apuserma
where user_CD = :TI_USER_NAME AND user_PASSWD = :IT_USER_PASSWD
AND SYSDATE BETWEEN USER_VALID_FRM AND USER_VALID_TO;
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
:global.compname := :compname;
compnm(:compname);
--USER_ID := CREATE_PARAMETER_LIST('USER_id_NAME');
call_form('Forms\MAIN_SCREEN',hide,DO_REPLACE);
exception
when no_data_found then
MESSAGE('Incorrect Username or Password. Please Re-Enter');
message(' ');
RAISE FORM_TRIGGER_FAILURE;
END;
EXIT_FORM;
When i tried to compile, i got error saying ,
Error 201 at line 10, column 28
identifier 'WIN_API_ENVIRONMENT.READ_REGISTRY' must be declared.
I am not getting to know What is the exact problem with this file?
Help me with this please.
Thank You.
Oracle forms builder 6i.
Oracle 9i.

Vijetha wrote:
I also want to know what is the use of win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername') ??
What does it do??
If i comment the following line , will it be a problem??
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
Because i commented the above line & compiled, so it is not giving any error now.
So please tell me what win_api_environment.read_registry does??
it's read windows registry value. So, no problem if you comment it.
Thanks

What are the limitations in terms of data size or performance while using csv or text file as datasource?

Also what are the limitations in terms of data size or performance related issues while using csv or text file?Is it the best practice to use csv , text file to use as a datasource to improve performance?Please Advice....  

Hi,Create Same Data Input for CSV and Text File ,Create 2 different reports one for CSV and One for Text ,run them one you have done that.Go to Report Menu and Select Performance Information .Use the Data in that to check which one is good datasource to improve performanceCheersRahul

How to increase the speed of video (avi file) using labview

How to increase the speed of video (.avi file) using labview? I have tried this by skiping alternate frames. also I have used minimum time delay.Is there any other option for which i can go?
please suggest me...........

Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

What is the best way to transfer files from a Power PC G4 that has NO power? Thanks.

What is the best way to transfer files from a Power PC G4 that has NO power? I have a newer iMac. Thanks.

Remove the hard drive and get one of these USB hard drive adapters. http://tinyurl.com/a5l2htj Then plug the adapter into your iMac to see/retrieve the files.
 Cheers, Tom

What is the Maximum Data can a file adapter can send at a time.

Hi ,
What is the Maximum Data can a file adapter can send at a time.Is there any maximum limit data can adapters will send.
can any one help on this.
regrads
Raghu

Hi Reddy,
I have raised the same question and I got correct answer.
Refer the below thread which will give u information.
Wat is the maximu size of data XI can handle
Thnx
Chirag

What is the expected behavior in iOS 7 when hitting send on an email with no wifi or cell connection being present?

What is the expected behavior in iOS 7.x when hitting send on an email with no wifi or cell connection being present? Also is the behavior designed to be any different if the user intiates airplane mode ahead of time?
We have a couple of users that claim in this situation the email will act like it sent in which they expect it will go out once a network connection is restored. They then come to find the recipient never recieved it and that it does not show in sent email. Its merely lost and they claim its also not in drafts.
I would hope the expected behavior would be that it would either retry sending once network connectivity is restored or at least warn that it needs to be saved as a draft since no connection is present.

It should show "X unsent messages" at the bottom of the mail app.
It also should create an outbox where the unsent emails will queue up, but this could also vary on the email provider.
Once you re connect to a network, it should just send the messages

We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize. We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process i

Hi
We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize.
We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process in captivate 6. so we request you to create a plugin or give a best option which have batch render quality and optimize in file size,

Captivate is e-learning development software not a dedicated video convertor, you are better off trying something like Adobe Media Encoder or Super.

What is the absolute path of my file?

Suppose my file is at the location
C:\oc4j\j2ee\home\applications\r1\r1\WEB-INF\lib\us-english-v2-whole.dict
what is the absolute path of this file.

Congrats on 20k warner.
Of course, if you're going to try to use that path in a String literal, you'll have to escape the backslashes
String absPath = "C:\\blah...";In Java, most File I/O classes are smart enough to translate a path into one that works with your platform. So when using paths in say a File object, you can just use forward-slashes to be consistent and not have to escape them.

If JailbreakDetectionRequirements are set on a PlayRight, what is the expected outcome on a PC/Mac?

I'm curious if I need to make our license server look at the incoming client information and conditionally turn this on.
If a license with jail break detection turned on is sent to a PC or Mac, what is the expected behavior? I assume that you'd allow playback since those devices can't really be 'jailbroken', but it would be great to have some clarification.

The jailbreak detection won't do anything for PC and Mac. It's just for mobile devices, like iOS and Android devices.
Thanks,
-- Hiroshi

What is the expected release date for Adobe Media Server 5.0 and Adobe Access 4.0 ?

What is the expected release date for Adobe Media Server 5.0 and Adobe Access 4.0 ?

you should be on the same subnet as the server in order to receive multicast.

What is the advantage of a JAR file?

what are the advantages of a JAR file?
is it faster to compile?
tell me why it does exist...
thanks

There should be lots. From the top of my head:
1) Compressed jar files are faster to download.
2) Browser only needs to open a single connection to download one jar files instead of multiple class files.
3) All class files are present at execution instead of being downloaded on a needs-basis which usually causes delays in the applet.
4) Jar files can be signed.
5) User doesn't need to juggle around several files at once nor do they need to deal with folders.
Of course there are disadvantages as well so you should weigh your options before diving in.

What is the expected SWF to AVI file size ratio?

Similar Messages

Maybe you are looking for