What is the Fair Usage reset date?

I am close to going over my usage limit.
I want to know the date it gets reset, so then i can slow down on my internet surfing until that date.
But I cant seem to find this info anywhere.
Is the reset date a fixed date or the date u signed up?
Thanks in advance.
Solved!
Go to Solution.

I think it is the first day of every month. If it isn't i'd be interested aswell because I download ALOT.
Like this post? Give it a Star . If this post answers your question, please Mark it as the Accepted Solution.

Similar Messages

Extremely Unhappy With the Fair Usage Policy

Can someone please answer me this, what is the point of having a 20mbps unlimited connection when there is infact a cap of 100gb pm? It's such a rip off my blood is boiling!!!
I've gone over the limit apparently and had my internet connection butchered as a result. The assistant on the phone said it's a "slap on the wrist" I seriously thought what an unprofessional cow and wanted to tell her to f*** off if I'm honest. I don't expect such rudimentary terminology to be used on me when I'm a paying customer, it's outrageous.
Now I read the fair usage policy and find out why my BitTorrent speeds have been so terrible, even before the recent capping of my speed. On a well seeded torrent (2000+ seeders) in a fully port-forwarded uTorrent I am achieving 30KBPS. After midnight they improve but still only averaging around 300KBPS. They throttle P2P as part of the draconian policy! Use GLASNOST (google it) to see what horrible things they are doing with your P2P!
Can someone explain to me how you justify limiting a so called "unlimited" bandwidth at a rate that is only 60GB more than your capped packages? This is clearly false advertising and your fair usage policy is the worst I have ever encountered. Either this is resolved or you can forget it, I'm cancelling my subscription, you will not get another penny out of me, and you can take it up with my lawyer.

They say its not limited as you are only crippled during peak hours and can down as much as you like in the remaining hours **bleep**
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me

What are the settings for apn data and mms for iphone 4 on straight talk?

what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

What is the benefit of Using Data Adaptor

Hello
I wonder that What is the benefit of Using Data Adaptor ? I don't know TopLink Technology , inorder to using Data Adaptor I should know toplink but what is the advatages of using BPEL database adaptors in conditions thet I can make webservices by making plsql web services or exposing ADF application modules more easier?
I think that if I use Data Adaptor (based of Toplink) I can use JTA feature for transaction managment , am I thinking Correct?
for example I can invoke to webservice A and the B in BPEL process with two DB adaptores (by global transaction ) such that if A failes the process automatically roles back the B transaction without need that I manauly compensate the undo process
please help me ?

Thank you for your very useful comments about DB adapter
I tried again and I have Successfully deploy and test my DB adapter with using # for parameter.
But I have another question : We have ADF Application that using ADF bc for user data entry supporting in use case scenario , but we want to call web services (eg BPEL) in save operation instead of ADF application modules Normal commit !
If we want using Data adapter for persist the Data that user entered by UI , we must write a lot of Insert or Update statements in DB adapter because of lot of database entities.
How can we shorten this production scenario in our Project?

What's the maximum size of data a coherence cluster can hold?

What's the maximum size of data a coherence cluster can hold before it starts noticing a degradation in performance?
Assume a partitioned topology is used with only one backup for each partition.

Hi,
Coherence partitioned cache is designed for linear scalability and it does it quite well. I don't see any reasons of performance degrations with increase in data size given, you have enough cores and memory for processing the requests and managing the data.
Cheers,
_NJ

What are the ways to download data from ods?

Hi all,
what are the ways to download data from ods?
1. se11/se12
2. listcube
3. infospokes.
Apart from the above 3 is there any other way to download data from my ods.
I need to download around 90 fields from my ods to a flat file. But listcube doesnt allow me to select all the fields. So i used se11 to download the data from my ods. bUt still se12 doesnt allow me to download all the 90 fields it downloads only 40 fields.
Can anyone suggest me how to select all the 90 fields and download it to an excel sheet.
thanxs
haritha

Hi Haritha,
Go to Tcode SE16, give your ODS active Table name and give width of output list as 1023.
Now run transaction to see your data and then click Settings --> User parameters and Select ALV Grid Display.
Now you should see and Excel Icon on top, click on it then select Table , then
Microsoft Excel and it will open your data with all columns you want.
I just tried for 213 columns
Hope this helps.
Thanks
CK

What is the exact usage of synchronization?

What is the exact usage of synchronization?

thanks. I don't mean to be rude, but you're basically
asking "what is java?" bit by bit. it's too vague to
be answered in a forum, and almost certainly a waste
of time for anyone to answer it. where are your
questions coming from? do some reading, either on the
internet, or in books. they'll explain what eg.
synchronization is, much much better than any
explaination you'll get here!And then, if some point is not clear, feel free to post it along with your question aobut whatever you're not understanding.

What are the steps to reseting the administrator password with the mac os x installation dvd?

what are the steps to reseting teh administrator password with the mac os x installation dvd?

See OS X- Changing or resetting an account password.

What is the Sequence of Master data and Transaction data R/3 to APO

Hi guys,
What is the Sequence of Master data and Transaction data R/3 to APO through CIF?

Hi,
Master data,
Material Indipendent data can be sent without any dependency.
Material Dependent data sequence is as follow.
Plant,
MRP areas,
Supply area,
Material,
MRP area material,
planning material,
ATP check,
Purchase info recards,
schedule agg,
PPM or PDS (But before PPM or PDS work center should send to apo) If PDS is sending then BOM should send before PDS.
Transaction data.
As per the business requirement what is planning in apo.
Regards,
Kishore Reddy.

What is the use of inverted date format

In table TCURR - Exchange rates, the field GDATU - Date As of Which the Exchange Rate Is Effective is stored as an inverted date. So 01/01/2008 is actually stored as 79919898.
What is the use of inverted dates. Why does SAP use them. Why not just use normal date format? If I want the latest record from the table, instead of sorting by descending, I actually have to sort by ascending because the date is stored in inverted format.

Hi,
Inverted date is a old concept which helps in soring the dates sometimes. but now ASCENDING and DESCENDING sorting is more easy and quick. Check this application help. maybe useful for you
1. CONVERT DATE f1 INTO INVERTED-DATE f2.
2. CONVERT INVERTED-DATE f1 INTO DATE f2.
Effect
Calculates the nine's complement of the internal date format (YYYYMMDD - for more information about internal display, meaning and initial values of types, see TYPES) and places it in the field f2. For example, 19950511 becomes 80049488 and 80049488 becomes 19950511.
In the inverse date format, the most recent date has the numerically smallest value. You can make use of this effect when sorting dates.
Note
The technique of manipulating the sort sequence of dates by inverting the internal date format is now rarely used. You can sort internal tables in order of ascending or descending date values much more efficiently using the ... ASCENDING or ... DESCENDING additions to the SORT statement.
Example
DATA DATE_INV LIKE SY-DATUM.
CONVERT DATE SY-DATUM INTO INVERTED-DATE DATE_INV.
Suppose, for example, SY-DATUM contains the date 11.05.1995 in its internal format 19950511. After execution of the CONVERT statement, DATE_INV would contain the internal format 80049488.
//Kothand

I have a problem that my phone only vibrates but does NOT ring any more. No matter what I try to do with settings turning off "silent" or whatever nothing helps. Do I need to reset. what are the consequences of resetting?

I have a problem that my phone only vibrates but does NOT ring any more. No matter what I try to do with settings turning off "silent" or whatever nothing helps. Do I need to reset. what are the consequences of resetting?

What a numpty! Yes of course you're right.
Couldn't find the answer when searching the forum but then came accross this.
Next dumb question coming up! :-(

Is the Fair Usage Policy still 300gb?

Is the Fair Usage Policy still 300gb?
The reason I ask is that I've just checked and I'm at 294gb up until 23:59 on the 27th yet I haven't received any speed restriction warning emails this month when you usually get a mail at 240gb.
Solved!
Go to Solution.

Confirming Infinitechris reply.
If you are a P2P user note the part I have highlighted in Bold.
Quote below is from KerryG message #18 in THIS THREAD.-
Re: BT TO SCRAP 300GB LIMIT!.
on 08-03-2011 16h27
Hi everyone
Yes, this is true! BT Total Broadband and BT Infinity customers will benefit from the removal of Fair Usage Policy (FUP) controls when they begin to be removed from April 2011. Once removed, heavy user customers will be able to download/stream as much as they wish without having their speeds restricted.
BT will remove the FUP controls currently applied to customers with ‘atypical’ usage. Today atypical users are restricted at 300GB usage and account for less than 0.5% of the BT customer base. BT will not target any individuals with restrictions based on usage levels. However, we still have traffic management policies that will restrict certain applications / protocols, such as P2P, when the network is busy.
As BT continues to invest in the network and network bandwidth we can now remove these restrictions and ensure the experience of the wider customer base.
(Note that charges will still apply for going over limits on BT Total Broadband Options 1&2 and BT Infinity Option 1 but traffic will not be managed.)
Thx
Kerry
BTCare Community Manager
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

What's the most up-to-date OS my iMac can run?

What's the most up-to-date OS my iMac can run?
I have an early 2008 iMac 8.1 Intel Core Duo 2.8GHZ 320GB Hard Drive.
I'm currently running 10.5.8 — could you advise the most advanced OS it can handle?
Thanks

http://www.everymac.com/systems/apple/imac/specs/imac-core-2-duo-2.8-24-inch-alu minum-early-2008-penryn-specs.html
You should be able to run the latest Mountain Lion - make sure to up your RAM (ML is a bit of a memory hog).

What are the idoc to send data from sap hr to sap fi

what are the idoc to send data from sap hr to sap fi

Message type of IDoc depends on the data you wish to send.
please detail on the data that you need to send in the IDocs.
regards,
Nitin

TS1398 what is the password to reset network settings

what is the password to reset network settings?

It's not just any old password. It should be the passphase used to get into your device from the lock screen.

What is the Fair Usage reset date?

Similar Messages

Maybe you are looking for