What is the fastest way to remove blacklisted IP from Exchange Online Protection Services?

Hello,
We have recently added new ISP and unfortunately, if we try to send an email to any customer who is using Microsoft Online Protection Services the email is bouncing back indicating that our new IP is blacklisted by Microsoft. In order to remove, we have
to send an email to
[email protected]
Is there any telephone number I can reach their support?
Thanks,

I have probably bad news, this e-mail is only valid option to delist currently without direct support contract with Microsoft (when using Office 365 or so).
Sent e-mail to this contact and also check mxtoolbox.com if your ISP is also not blocked somewhere else and why.

Similar Messages

  • What is the best way to remove all info from a MacBook Pro before passing it along to someone else?          passing it on to someone?

    What is the best way to remove all info from a MacBook Pro before passing it on to someone else?

    Read this: http://www.tuaw.com/2010/09/24/mac-101-preparing-your-old-mac-for-sale-or-recycl ing/

  • What is the best way to remove crayon writing from my Ipad?

    What is the best way to remove crayon writing from my Ipad?

    All Apple recommends is a damp cloth.
    Depending on how much and thick it is, I'd use a dry papertowel or your fingernail to scrape the bulk of it off (I suggest fingernail so that you use something that can't really scratch the iPad)
    Once you get most of it, then use a damp, not wet, cloth, maybe one that you moistened with warm water to help cut through the waxy nature of the crayon.
    What you don't want to do is use chemicals or anything like a scrubby pad because you don't want to scratch the surface in your efforts to clean it.

  • HT5922 I have some devices that i no longer use with AirPlay. What's the best way to remove those devices from the AirPlay List?

    Bonjour,
    I have some devices that i no longer use with AirPlay. What's the best way to remove those devices from the AirPlay List?

    In article <e35sc3$ru1$[email protected]>,
    "-->dan mode" <[email protected]> wrote:
    > > All
    > > I have a website I would like to remove from the
    internet, However I am
    > > planning on keeping the IP for a development
    location and would like to
    > > put
    > > a page up that says this site is no longer
    available. Is this how you do
    > > it
    > > or are there other pages to display when a site is
    removed.
    > > Thanks
    > > Dave
    Depending on how long the site has been active, it may be
    already
    spidered by search engines and cached. However, for the most
    part, I
    usually use my FTP program OR even Dreamweaver itself (now
    that I can)
    to delete files on the server just as I do locally. Hit the
    delete and
    confirm

  • What is the best way to remove personal data from the hard drive in preparation for selling my old Mac?

    I am going to sell or perhaps donate my old Power Mac G5.  Is there an easier, yet comprehensive way to remove my data from the hard-drive?  My best approach is dumping anything I do not want found into the trash.
    I am running Mac OS 10.5.8 on the powermac G5

    For better security than the simple Erase (which does not actually over-write the data blocks, only clears the directory), choose Security Options, and Zero all data, one pass.
    After a Zero all data, the only way to recover the data is to dis-assemble the drive in a clean room and use expensive test gear to recover a little of the data. That is good for all but Military Secrets.
    If you really trust no one under any circumstances, remove the drive and beat it to death with a hammer.

  • What is the FASTEST way to present an image from disk?

    I am currently using the standard read *jpeg file to display an image from disk to a picture control. My question is what is the most efficient method of getting an image ot the front panel, whether it is with this control, IMAQ, etc. At the end of the day, timing is crucial, and I would like to sync a trigger with the onset of an image.
    Thanks in advance.

    > I am currently using the standard read *jpeg file to display an image
    > from disk to a picture control. My question is what is the most
    > efficient method of getting an image ot the front panel, whether it is
    > with this control, IMAQ, etc. At the end of the day, timing is
    > crucial, and I would like to sync a trigger with the onset of an
    > image.
    >
    FASTEST will be imaq, and both the intensity graph and the picture
    control will be a bit slower since they are both better suited to other
    tasks.
    First, if you only have a small number of jpegs, you might preload them.
    You could even go so far as to draw them to a hidden picture control
    and simply show it when your event occurs.
    The differences here are roughly that IMAQ will already have the image
    data
    placed into their image and will simply need to draw it, similar to
    showing a LV control. The picture control data is a flattened version
    of the image that needs to be interpreted somewhat and placed into a
    system image, then drawn. The intensity graph assumes that is is false
    coloring an intensity map and is zooming or stretching the data as well.
    Therefore it also constructs a bitmap from the data and takes a bit
    longer to do it as it decimates and stretches the data as necessary.
    Greg McKaskle

  • What is the best way to remove unwanted software from my mac

    I was told that I have unwanted software on my MacBook. The software cannot be seen in the Applications folder, but it is there and it needs to be removed or files and network connections will be damaged. I know there are free downloads to help resolve the situation, like AppZapper. I am wondering what is the best free download available.

    Who told you that you have unwanted software on your Mac?
    How did they find out that this was the case?
    Did you allow someone to remotely connect to your Mac?
    What is the name of this software?
    Only after we know the validity of this information will it be time to do something about it.
    At the present time I would not load any crapware on your Mac such as AppZapper. It is never needed for any reason on a Mac.

  • What's the quickest way to remove "compilations" setting from all albums?

    I noticed that a lot of albums of mine are stored in the Compilations folder, however, this must have been a default setting when ripped as they aren't compilations, just regular releases. I want to put all these albums into the correct artist folders and want to know the best way to do this to not lose the links between them and iTunes.
    I was thinking if it was possible to go into itunes, choose view-compilations, filter to show all compilations, then select them all, right click get info, and check and uncheck the compilations section - would this work? Has anyone else had success putting "compilations" back to individual artists?

    Hi,
    See attached screen shot
    You will now see Compilations under Artist. This will help you to identify true compilations as well as those mislabelled.
    Jim

  • What is the best way to remove elements 10 from one pc and install it on another?

    What steps need to be taken to remove Adobe Elements 10 from one pc and install it on another?

    Use back up and restore from the Organizer menu. You are permitted two activations so no real need to deactivate the old copy unless you have installed it previously on another machine.
    See these instructions for PSE6 and above.
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

  • What is the safest way to remove a virus from a Mac?

    Hello!
    I just ran a virus check using ClamXav and a virus popped up. The information for the virus is as follows:
    File name: 32294 . emlx
    Infection name: Heuristics. Phishing. Email. Spoofed Domain
    (There are no spaces before or after the periods.)
    I've never had a virus on here before and I always try to be safe, but sometimes others use the computer as well.
    If anyone has any tips or information about this horrible thing I would truly appreciate it!
    Thank you for stopping by :-)

    That is not actually a virus, it's just an e-mail message that ClamXav suspects may be a phishing e-mail. The key phrase there is "may be." ClamXav uses some heuristic rules to try to identify potential phishing e-mails, but those rules are far from reliable.
    Control-click on each item in the list of malware ClamXav has detected, and choose Reveal in Finder. This will show the problem e-mail message file (named using a number followed by ".emlx"). Double-click that file (don't worry, this is perfectly safe) to open it in Mail. You can then delete the message from there, if it is actually a phishing e-mail.
    Never allow ClamXav to delete e-mail messages. That can corrupt the index of the mailbox the message is in, and it does not remove the message from the server (if it's still stored on the server), so you may end up with the bad message showing back up again.

  • What is the fastest way to bulk load data from AS/400 to Oracle?

    I have been asked to move data from AS/400 to Oracle11gR2 as fast as ODI possibly can. Just straight mapping, no transformation, no joining.
    An ODI11g agent is started on the target Oracle machine but, being new to ODI, I only know how to use SQL to Oracle LKM to load to staging and then Oracle Incremental Update IKM to move from staging to target table.
    It took 50 minutes to move around 4 million records. I need to get this down to around 10 minutes. So guys, if there is a best practice to do this, please let me know, but right now I'll try any suggestion that you could think of.
    Thank you in advance.

    Create a new FILE dataserver - the put the IP address in the 'Host', complete the user and password fields. Create a new 'physical schema' - badly named I know as there is no such thing. The Physical schema 'Data Schema' would point to the directory that you require. /usr/etc/data/ for example. set your work as well.
    create a logical, link the two together via the context etc etc
    Basically the same as a db topology object. You can also refer this in the API OdiRef.getSchemaName() as you can with any other db logical.
    Cheers
    Bos

  • What is the best way to remove footage from the middle of a clip?

    What is the best way to remove unwanted footage from the middle of a clip? I have a clip that I've trimmed from the start and finsih, but I need to remove "boring" footage from inbetween.

    Thank you for your replies. I tried the blade tool followed by select and delete but it did not seem very precise. I had better success with this aproach at the ends rather than in the middle. I watched a tutorial video on using the precision editor, but the video was small so I had a difficult time following where the person clicked, etc. Any info on using the precision editor would be greatly appreciated. I need to make precise cuts to avoid creating unatural motion for the subject. So far, close but no cigar.
    Regards,
    Michael

  • What is the simplest way to remove duplicates on both iMac and iPad2?

    What is the simplest way to remove duplicate photos from both iMac &amp; iPad2?

    The implication here is that your music is only on the iPod, for if it is in iTunes, you need only do the restore. So you are really asking how you move the music from your iPod back into iTunes, so that when you restore it will go back to the iPod. Take a look at Para. 8 in this summary post I worked up.

  • What's the best way to removed unwanted files?

    I have an iMac G4 running OS X 10.4.11 with 1GB of DDR SDRAM. I'm wondering what's the best way to remove unwanted files from the RAM, if it's even possible. There are apps and other files I no longer need. If I can dump the unused files will it help the computer run a little faster? Can I eliminate the unwanted files some how by myself or do I need a program that does it? Thanks

    bad dad wrote:
    I have an iMac G4 running OS X 10.4.11 with 1GB of DDR SDRAM. I'm wondering what's the best way to remove unwanted files from the RAM, if it's even possible. There are apps and other files I no longer need. If I can dump the unused files will it help the computer run a little faster? Can I eliminate the unwanted files some how by myself or do I need a program that does it? Thanks
    Applications are stored perminately on the harddrive [ Macintosh HD ]. When applications are running that is when they appear in a window, they take up RAM. You see your running applications by using activity monitor:
    Macintosh-HD -> Applications -> Utilities -> Activity Monitor
    Application when they are not running, they do not take up RAM.  You will not see any performance improvement when you delete an application from your Harddrive.  [ unless you have filled up your harddrive ]
    Best to have greater than 2gig of free space on your Harddrive.  Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
    Most applications do not take up much space on the Harddrive.  I copy my unused application to a folder named additional applications.
    (0)
    Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
    Go after large files that you have created & know what they are.  Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
    (1)
    Run
    OmniDiskSweeper
    "The simple, fast way to save disk space"
    OmniDiskSweeper is now free!
    http://www.omnigroup.com/applications/omnidisksweeper/download/
    This will give you a list of files and folders sorted by size. Go after things you know that are big.
    (2)
    This will save you a gig of space.
    Monolingual is a program for removing unnecessary language resources from Mac OS X,in order to reclaim several hundred megabytes of disk space. It requires at least Mac OS X 10.3.9 (Panther) and also works on Mac OS X 10.4 (Tiger). It worked for me on 10.4
    http://monolingual.sourceforge.net/
    A detailed write-up on how to use Monolingual:
    http://www.jklstudios.com/misc/monolingual.html
    (3)
    These pages have some hints on freeing up space:
    http://thexlab.com/faqs/freeingspace.html
    http://www.macmaps.com/diskfull.html
    (4)
    Buy an external firewire harddrive.
    (5)
    Buy a flash card.

  • What is The correct way to remove duplicates from the iTunes library?

    I have a 300GB external drive which over the last 5 years has got bloated with duplicate tracks.
    If I use the show duplicates option, I see 10,479 songs totalling over 50GB. Now, those songs that are shown, do they include the original that they are a duplicate of, or are they JUST the duplicates?
    I have been sorely tempted to select all and delete to the trash, but I want to be 100% sure I don't delete any originals. Also, there are some duplicate tracks that are genuine dupes, for example, I have an original LP with a particular track on it, but then that exact track appears on a compilation LP, so I don't want to remove the compilation LP tracks as then the compilation is incomplete.
    I have Tidy Up installed, but I'm a bit wary to use it as I want to be 10% sure I do the right thing, it's a lot of money to lose, and I'm a DJ, so this is thousands of conversions from my vinyl collection and stuff purchased and ripped from CD.
    I see many methods of getting rid of duplicates but no definitive answer for someone in my position.
    Many thanks all!

    Akuwa wrote:
    This is supposed to be a fix to the result from SQL. Currently no access to the SQL code so we have to fix in he Java code...Then really, whoever said you couldn't change the SQL has absolutely no right to turn around and demand the fastest way to remove the duplicates in Java. It's almost certain that the fastest way to remove the duplicates would be for the SQL not to select them in the first place, so if you don't permit changing the SQL then it's clear you aren't interested in the fastest way.

Maybe you are looking for