What is the FAT file system and how can I format my LEXAR flash drive with it?

Recently, Apple support helped me download my songs form iTunes to a LEXAR flash drive. I connected it to the USB connector in my car. My car's display said
"unsupported". My other LEXAR usb plays music perfectly. What is wrong? My car's manual says that my audio system reads and plays audio files on the USB flash memory device in MP3, WMA, AAC formats. (AAC format files recorded with iTunes only.) How do I correct this problem?

Reformatting the drive will completely erase it so make sure you have copies of the files.
FAT format is an older non-Mac format but is still found on plenty of things such as flash drives. It's the one format that both Macs and Windows computers can fully use but it has limitations outside small-scale use. Your Apple person must have reformatted your drive to Mac format which wasn't very smart of the person since almost nothing except Apple products can work with Mac format. Are you sure you explained how you intended to use the drive, or did you just ask the person how to put files on there?

Similar Messages

What is the Weigh Bridge System and How to Implement

Hi All,
I have a requirement from a client to interface with Weigh Bridge systen and to generate the delivery order record.
Could someone explain to me what is the Weigh Bridge system and how it is being implemented in SAP.
Thank you!
Regards,
Yvonne

Hi,
this is to inform you that,
this weigh bridge concept is very simple its an interface with other or software which the company which is implementing SAP.
for EG:
my company is cement company in production plant you will be getting raw materials in tons and out going finished products will also be in tons.
in that plant there is weigh bridge where in flow of materials will be wieghed and if it matches to the paper which is getting along with then he ticks OK other wise NOT.
the above case applies to out going of goods in tons also.
regarsd,
balaja

What is the package mzm.stuhjljp and how can I re download it ?

What is the package mzm.stuhjljp and how can I re download it ?
I opened it and a Lion icon went to apps folder, then I deleted the
package folder and package,because I did not recognize what it
was and after I found out I need the whole package stored
someplace else beside my download folder.

Hi,
Thanks a lot for your help and providing this link. I'd actually already looked at that before, but I don't understand how it clarifies what the default identity store is. The relevant part is this, if I understand correctly:
OPSS initializes the identity store service with the LDAP authenticator chosen from the list of configured LDAP authenticators according to the following algorithm:
1.    Consider the subset of LDAP authenticators configured. Note that, since the context is assumed to contain at least one LDAP authenticator, this subset is not empty.
2.    Within that subset, consider those that have set the maximum flag. The flag ordering used to compute this subset is the following:
    REQUIRED > REQUISITE > SUFFICIENT > OPTIONAL
    Again, this subset (of LDAPs realizing the maximum flag) is not empty.
3.    Within that subset, consider the first configured in the context.Step (1) will match 2 external AD's and the built-in WLS LDAP, so 3 in total.
Step (2) will still match 3 in total, as they are all 'sufficient'. In my setup, I need them all to be 'sufficient'.
Step (3) is a step I don't understand. What is "the first configured in the context"? What context? Do they mean the one that was first created? In that case I can't change the default, right?
Or do they mean "the first in the list on the WLS Console"?
Best regards,
Ludovic

What is the normal file structure and how do I "cut"?

I just did a clean Yosemite install from a manually backed up external due to HDD issues. When I backed up the original drive I copied my user folder into a folder named"backup". When I did the new Yosemite install, I directed it it migrate my documents from that folder. Now when I click on the standard "documents" folder on the left, I get a sub folder named "backup". What should I see? My name folder myname/ or the sub folder under that like music/movies/etc.
also, how do I "cut" the folders to move them instead of copy? I tried dragging them but I have 1.8 TB used of a 3 TB drive so I get a messeage there is not enough room to copy. "Cut" is greed out when I select folders.
any input appreciated ....

How did you make the original backup?
Dragging items in the Finder is not a good way to backup - it can miss may important files and it can skip files (or fail mid process with cryptic errors).
Also how did you 'migrate' the folders back - did Migration Assistant do it for you or did you manually move the files?
Finder can 'move' items instead of copying them, but there is an inherent risk in this process if the move fails mid-way through.
Begin dragging files to another disk, the cursor will show a green plus , hold command & that green plus goes away - this will now move instead of copy. The behaviour varies depending on if you are copying onto another disk or not. press the modifiers to see what the cursor indicates (cmd, alt, will alter the behaviours).
To see a 'normal home' folder create a new user account in System preferences > Users & groups. Then login as that user. By default you have the following items in a user account…
Desktop
Documents
Downloads
Movies
Music
Pictures
Public
Sites (will not exist on newer installs)
I suspect it may be simplest to delete the current botched attempt & empty the trash, go back to the original disk & re-copy the items into the correct folders. You will need to be careful though Finder is not a good tool for large file copies, and permissions can get in a mess, ask if you wan't instructions on how to repair the user permissions after the account is back in order.
Note: Carbon Copy Cloner, SuperDuper! or even Disk Utility are better tools than Finder to use for backing up.

What is the default identity store - and how can I set it?

Hi,
I'm running Webcenter on WLS, and using WLS and JPS for the authentication of users. On the WLS Console, if I go to Security Realms -> myrealm -> Providers, I have a list of four different providers.
If I understand correctly, these four providers are my identity stores. How can I set one as the 'default' identity store? Or see which one is currently the default?
The reason I'm asking is I have the following code in Webcenter to create a new user in the Active Directory:
      // Get the default identity store
      IdentityStore idStore = WCSecurityUtility.getDefaultIdentityStore();
      // Get the user manager object
      UserManager usermgr = idStore.getUserManager();
      usermgr.createUser(loginName, password.toCharArray(), propertySet);So I have a utility Java class which gives me the "default identity store". Now I want to change the WLS configuration so that the Active Directory in which I want to create new users is the "default" identity store.
Thanks in advance for any help,
Ludovic

Hi,
Thanks a lot for your help and providing this link. I'd actually already looked at that before, but I don't understand how it clarifies what the default identity store is. The relevant part is this, if I understand correctly:
OPSS initializes the identity store service with the LDAP authenticator chosen from the list of configured LDAP authenticators according to the following algorithm:
1.    Consider the subset of LDAP authenticators configured. Note that, since the context is assumed to contain at least one LDAP authenticator, this subset is not empty.
2.    Within that subset, consider those that have set the maximum flag. The flag ordering used to compute this subset is the following:
    REQUIRED > REQUISITE > SUFFICIENT > OPTIONAL
    Again, this subset (of LDAPs realizing the maximum flag) is not empty.
3.    Within that subset, consider the first configured in the context.Step (1) will match 2 external AD's and the built-in WLS LDAP, so 3 in total.
Step (2) will still match 3 in total, as they are all 'sufficient'. In my setup, I need them all to be 'sufficient'.
Step (3) is a step I don't understand. What is "the first configured in the context"? What context? Do they mean the one that was first created? In that case I can't change the default, right?
Or do they mean "the first in the list on the WLS Console"?
Best regards,
Ludovic

What's the Commitment item? And how to use it?

When I create a G/L account by FS00 I need to input a Commitment item.
But I don't know how to use it.
Can you tell me what's the Commitment item? And how to use it?
Thank you very much.
Moderator: Try pressing F1 or going to help.sap.com

>>In SAP XI / PI, WS adapter is not thier frm standard SAP.
Are you sure about this?
WS is a standard adapter shipped along with PI 7.1 installation.
Quote from help.sap.com
Using the WS adapter you can configure the communication of systems, which communicate with each other using the Web service runtime either directly (point-to-point) or using the Integration Server
Refer:
http://help.sap.com/saphelp_nwpi71/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/45/37d73b80554c2ce10000000a1553f6/frameset.htm
If you are not sure about what you are saying, it is better not to say it.

Why does the new version not have back-up disc in the library file? And how do I fix it?

Why does the new version of i-tunes not have back-up to disc in the library file? And how do I fix it?

Fast backup for iTunes library (Windows)
Grab SyncToy 2.1, a free tool from MS. This can be used to copy your entire iTunes library (& other important data folders) onto another hard drive or network share. You can then use SyncToy periodically to synchronise or echo your library to the backup. A preview will show which files need to be updated giving you a chance to spot unexpected changes and during the run only the new or updated files will be copied saving lots of time.
If your media is all organised below the main iTunes folder then you should also be able to open the backup library on any system running the same version of iTunes, regardless of the drive letter or path it appears on.
Step-by-step guide to using SyncToy.
tt2

What's the FPGA step size and how to calculate it?

Hi there,
I inherited an vi with problem in it. It's basically reading the binary file then display it. So the vi reads the binary file by using Read From Binary File, the output data from this function then sends to FPGA after multiply a number (32767/10). But unfortunately I got a wrong output. The final output value for some reasons looks got attenuated. People told me maybe it's related to the FPGA step size, so I want to know what is the FPGA step size and how to calculate it. Can someone answer my questions here?
Thanks in advanced!!!

Hi Weny,
It sounds like you are trying to find out the output resolution of your FPGA module. It would be helpful if you provided what FPGA module you are using in your tests so we know what information to provide. For instance, the R Series Manual provides information on how to calculate the required DAC output code to generate the desired output voltage. You should also try to keep the accuracy of your device in mind. The analog output signal you are generating will be subject to gain, offset, and noise errors. You can use the specifications sheet (such as the R Series Specifications) of your device to determine what accuracy your board will have. The specs also provide information on the resolution of the board. You can search ni.com for the manual and specifications for your particular device if you are not using R Series.
Regards,
Browning G
FlexRIO R&D

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

The battery is fully charged so it is not the problem.
What happens when you use the MagSafe?

TS1436 I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?

I received this message twice on 2 new & separate attempts to burn a playlist to a NEW cd: "The attempt to burn a disc failed. The burn failed because of a medium write error." What is a "medium write error" and how can I deal with this?

Hello Pat,
The following article provides troublehsooting steps and information that can help get iTunes burning discs again.
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
Cheers,
Allen

What is the latest operating system that I can install on my macmini 1,1? it has an intel core duo and 2gb memory.

what is the latest operating system that I can install on my mac mini 1,1? it has an intel core duo and 2gb memory. Current osx is 10.4.11.

Mac OS X 10.6.8.
(63055)

Hi,I have problem with my mac's storage. I deleted some documents,but the storage involves 34Gb other,what does the other consist of? how can I do my mac's storage specially other free?

Hi,I have problem with my mac's storage. I deleted some documents,but the storage involves 34Gb other,what does the other consist of? how can I do my mac's storage specially other free?

1. Empty Trash.
    http://support.apple.com/kb/PH10677
2. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
3. Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
4. Disk space / Time Machine ?/ Local Snapshots
   http://support.apple.com/kb/ht4878
5. Re-index Macintosh HD
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409

Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

You cannot use iCloud Storage to suppliment your iPad. They are mainly used to backup iPad.
Free up space on iPad
Settings>General>Usage>Storage>Delete what is not needed to free up space on iPad.

Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

Question
better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
Details

As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
(3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
Flash Player \ #SharedObjects
If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
If the value is blank, you could try inserting a sensible value and see whether that helps.
Any luck?

How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?

How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
Someone, Please help

Hi Allen,
Is there any way to store the back up to Mac and restore after formating?

What is the FAT file system and how can I format my LEXAR flash drive with it?

Similar Messages

Maybe you are looking for