What is the field "INFTY" in the structure P0006 used for?
Hi HR Experts,
The PSKEY vs PAKEY is the field INFTY. So what is the field INFTY in the structure P0006 used for?
Thanks!
Anthony
The PSKEY is related to teh PSNNNN structure that is associated with the data of a given info type. the PSKEY holds INFTY for processing info type data genericaly in background programs through generic structures, IE: pass any info type structure to a FM. This INFTY field allowed the programs to know which info type structure is being processed unlike the PAKEY which is used to save infotype data in the back end system at the DB level.
thanks.
JB
Similar Messages
-
Risks of changing the field length of data structure of a Cluster Table
Hello,
We are on ECC 604 and had implemented HR & Travel Management. Reporting on these applications is done in BI. We use ESS and & Mobile Travel for time, travel expenses, etc and use PCLn clusters.
There is business need to change the length of a field from 20 to 40 for the data structure PTK** of cluster table PCL1.
We are exploring various options to avoid core modifications.
We are also assessing the risks associated with changing the field length.
I am asking you for your opinion about the risks associated with changing the field length of a data structure of cluster table.
Thanks & Regards,
Manoj K PingaliRecently, we came across the same situation where we had to change the length of a field. Let me explain you what precautions we had taken during that time.
1. Apply the where use list of that table/ Field and check whether it has been used in some program and FM or not. If yes then check one more thing that check the TYPE of another variables on which system has populating data (move, write or in FM parameters). if you will not consider this then you can land you in big trouble. (Conversion dump)
2. Ask the basis to take a dump of the production, quality and data for the safer side if something does not go right.
Now, you can do the changes in your development system and then adjust the database and see the impact of it.
Hopefully, you will not come across any difficult situation in this changes.
Thanks.
Anurag -
What are all the fields covered in the Raw file received from the Card Co
Hi Experts,
I want to know what are all the fields covered in the Raw file received from the credit card company say AMEX before uploading the data into ASP system i.e. CCD format file to be uploaded in T-Code PRCC
Some of the fields I know:
1. Name of the Employee
2. Company ID
3. Credit card number
4. Currency
5. Amount
6. Exchange rate
7. Date of Transaction
8. Description
9. Document no.
10. Expense type
11. Expenses paid by company
Waiting for a positive response from your side
Regards,Hi
The below mention is the possible values/records will be received from Banks regarding credit card expenses
ORGANIZATION / HIERARCHY HEADER RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY NAME
COMPANY ID
SUB COMPANY ID
EFFECTIVE / FILE DATE
CCF VERSION
COMPANY NUMBER
TRANSACTION POSTING DATE START
TRANSACTION POSTING DATE END
FILLER
TRX CONTROL DATA
ORGANIZATION / HIERARCHY DETAIL RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
CORP PARENT NODE
CORP CHILD NODE
PAST DUE BUCKETS RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
STATEMENT DATE
AMOUNT PAST DUE
30 DAYS PAST DUE
60 DAYS PAST DUE
90 DAYS PAST DUE
120 DAYS PAST DUE
150 DAYS PAST DUE
180 DAYS PAST DUE
180 PLUS DAYS PAST DUE
PREVIOUS BALANCE
FILLER
TRX CONTROL DATA
CARDHOLDER HIERARCHY RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
NODE ID
ACCOUNT NUMBER
FILLER
TRX CONTROL DATA
ACCOUNT HEADER RECORD 1
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
PROCESSOR
ACCOUNT NUMBER
ACCOUNT TYPE
LAST NAME
CARDH FIRST NAME
CARDH MIDDLE NAME
ADDRESS LINE1
ADDRESS LINE2
ADDRESS LINE3
ADDRESS LINE4
ADDRESS LINE5
CITY
STATE / COUNTY/ PROVINCE
POSTAL CODE
COUNTRY
NATIONAL ID
TELEPHONE NUMBER
WORK PHONE NUM
ID VERIFICATION CODE
DATE OF BIRTH
CYCLE CODE
FAX NUMBER
E MAIL ADDRESS
EMPLOYEE ID
CLIENT ID / CUSTOMER NUMBER
CUSTOMER VAT NUMBER
TITLE
STMT DATE
GENDER
FILLER
TRX CONTROL DATA
MAIN TRANSACTION RECORD
FIELD NAME
RECORD TYPE
TYPE INDICATOR
COMPANY ID
SUB COMPANY ID
CBS TR RUN DATE
ACCOUNT NUMBER
TRANS DATE
TRANS TIME
POST DATE
FILLER
AUTH REQUIRED
AUTH ID
CONVERS DATE
POS ENTRY
POS COND CODE
ACQUIRER ID
REFERENCE NUM
TRACE NUMBER
FILLER
TRANS ID
MCC
MCC INFO DATA
MERCH ACCEPTOR ID
MERCH DESCRIPTION
MERCHANT CITY
MERCHANT STATE / PROVINCE
MERCHANT POSTAL CODE
MERCH COUNTRY
MERCHANT VAT NUMBER
MERCH DESC FLAG
MERCHANT REFERENCE NUMBER
SOURCE CURRENCY
SOURCE AMOUNT
BILLING CURRENCY
BILLING AMOUNT
SETTLEM CURRENCY
SETTLEM AMOUNT
US DOLLAR CURR
US DOLLAR AMT
GB POUND CURR
GB POUND AMT
EURO CURRENCY
EURO AMOUNT
ASIA YEN CURR
ASIA YEN AMT
SWED KRON CURR
SWED KRON AMT
CANADIAN CURR
CANADIAN AMT
CONVERSION RATE
DB CR FLAG
MEMO FLAG
CORP ACCT NO
SALES TAX
SALES TAX FLAG
VAT TAX
VAT TAX FLAG
PURCHASE ID
PURCH ID FLAG
TRAN TYPE
NO OF ADDENDUMS
VISA_MCI TRAN CODE
ADDENDUM KEY
TICKET NUMBER
MSG TYPE
FILLER
VAT EVIDENCE FLAG
CUSTOMER REFERENCE NUMBER
DISCOUNT AMOUNT
MESSAGE ID
SUMMARY COMMODITY CODE
CUSTOMER VAT NUMBER
FILLER
TRX CONTROL DATA
The above mentioned is Just 50% of data will be received form the banks. Still footer details have to added.
Thanks,
Nandagopal C
Edited by: Nandagopal Chiranjeevi on Feb 6, 2009 5:40 AM -
What does the field "Version of the Reporting Component" in the table RSZC
Hi Experts,
Was wondering if any of you have the answer to the following:
The table RSZCOMPDIR stores details of the queries.
Now the field "Version of the Reporting Component" in this table contains many different values viz. 0, 11, 13, 15, 100, 101, 102 etc.)
However, am not sure if this field denotes the object type....for e.g. bot calculated & restricted key figues may have version 15 etc.
So, in a nutshell, what does the field "Version of the Reporting Component" in the table RSZCOMPDIR signify?
Thanks,
BalaI have not seen this done for CVI but I believe for all Microsoft functions such as this you would use ActiveX to call the Word, Excel, and possibly powerpoint ActiveX classes.
Ian M.
National Instruments -
Highlighting TEXT - not the field - and clearing the set value for a new one
I have a form in which various text fields are set with a message to inform the user as to what kind of information I want typed in. My goals are:
1. Have the text get highlighted so when the user starts typing, the "old" value gets replaced with the "new"
2. Or, when the user tabs or clicks in the field all of the "old" value is deleted and they can start typing the "new" value from the beginning of the field.
I am trying to eliminate having to manually highlight the field in order to type in the needed information. But each field needs to start with a value so the user knows what kind of information I am looking for.
Does this make sense? By the way, I have no JavaScript experience...uh oh!Use the Media Manager (under the File menu bar item).
Link:
What Can You Do with the Media Manager? -
How to find where the coding of the fields displayed in the standard transactions is written.FOr example In XD0l if I want to find out where the 'key term' is coded in the stadard programe of the transaction XD01.When I go into sytem--->status,I will get to see a window showing the details,In that we can see 3 PRAGRAMS-PROGRAM(SCREEN),PROGRAM(SUB SCREEN) AND PROGRAM (GUI).Can nay one explain the significance of these 3 programs.
Hi Henry,
I don't think this is the easiest way to look at the code around a particular field on the screen. Debugging standard programs also can be very tedious, if not impossbile. So, instead of this question, I would like to find out exactly what you want to do if you know the code.
If you are in a transaction and you want to know where the code of a particular field is, the fastest way to get to it is by pressing the F1 key on the field and then press the Technical info button on the help screen. In here you will typically see the same kind of information but it is very specific to the field you selected.
PROGRAM(SCREEN) tells you which program is manipulating the main screen, in which your field is embedded. Remember your field may be included in a sub-screen and that subscreen may be the one included in the main screen.
PROGRAM(SUB SCREEN) tells you which program is directly responsible for the field on the subscreen it is included in. This is where you should find the code most appropriate for the field, but not necessarily.
PROGRAM(GUI) controls how your push buttons and the menu options in the screen behave and controlled.
Srinivas -
I wish to modify the name of one of the field name in the sales order.
HELLO GURRRUS,
i wish to modify teh name of one of the field name in the sales ordder.
what is the procdure,path and steps involved in that.it would be of great help of me if u take some time and suggest me.
bye take care hav a happy and peaceful lifeHi Sameer,
If you want to change the name or description of the field in the Sales order,
you have to use the userexit MV45AFZZ and use the Form USEREXIT_FIELD_MODIFICATION.
Get the help of the ABAPer and decide where do you want to make the change in the Header or the Line items. Accordingly give the requirements to the ABAPer.
He will do it.
Thanks
Augustine Ponraj -
Problem with READ Statement in the field routine of the Transformation
Hi,
I have problem with read statement with binary search in the field routine of the transformation.
read statement is working well when i was checked in the debugging mode, it's not working properly for the bulk load in the background. below are the steps i have implemented in my requirement.
1. I selected the record from the lookuo DSO into one internal table for all entried in source_packeage.
2.i have read same internal table in the field routine for each source_package entry and i am setting the flag for that field .
Code in the start routine
select source accno end_dt acctp from zcam_o11
into table it_zcam
for all entries in source_package
where source = source_package-source
and accno = source_package-accno.
if sy-subrc = 0.
delete it_zcam where acctp <> 3.
delete it_zcam where end_dt initial.
sort it_zcam by surce accno.
endif.
field routine code:
read table it_zcam with key source = source_package-source
accno = source_package-accno
binary search
transportin no fields.
if sy-subrc = 0.
RESULT = 'Y'.
else.
RESULT = 'N'.
endif.
this piece of code exist in the other model there its working fine.when comes to my code it's not working properly, but when i debug the transformation it's working fine for those accno.
the problem is when i do full load the code is not working properly and populating the wrong value in the RESULT field.
this field i am using in the report filter.
please let me know if anybody has the soluton or reason for this strage behaviour.
thanks,
Rahim.i suppose the below is not the actual code. active table of dso would be /bic/azcam_o1100...
1. is the key of zcam_o11 source and accno ?
2. you need to get the sortout of if endif (see code below)
select source accno end_dt acctp from zcam_o11
into table it_zcam
for all entries in source_package
where source = source_package-source
and accno = source_package-accno.
if sy-subrc = 0.
delete it_zcam where acctp 3.
delete it_zcam where end_dt initial.
endif.
sort it_zcam by surce accno.
field routine code:
read table it_zcam with key source = source_package-source
accno = source_package-accno
binary search
transportin no fields.
if sy-subrc = 0.
RESULT = 'Y'.
else.
RESULT = 'N'.
endif. -
Change the field description in the query report
Dear All,
I have created a querry using SQVI,It is working fine Now i want to change the field description in the querry report,Please suggest on this.Hi,
follow below steps
SQVI -> Enter Report name -> Change -> click on layout mode - > Expand tables - > double click on filed names - >
coming right side you are able see list of output fields .
Just double click on the field then going to the editable mode Description.
Thanks
Balakrishna -
Problems with extended features. I can no longer fill out my documents in the fields provided. The error message I get is "This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available. Please contact the author for original version of this document."
Yes. I don't have the version you pay for. I also tried the free version
of EchoSign. Maybe that caused the problem.
Any more suggestions would be greatly appreciated.
Estelle Oliansky
Estelle OlianskyRealtor, SRESCell (734) 748-2329
*3DX Real Estate *| www.3dxonline.com* | (v) 888.304.1447 ext.
102 | (f) 888.304.1456 | 42705 Grand River Ave. Ste. 201 | Novi, MI 48375*
P Please consider the environment before printing this e-mail
This electronic mail message and any attachments contain information
that(a) is or may be LEGALLY PRIVILEGED, CONFIDENTIAL, PROPRIETARY IN
NATURE, OR OTHERWISE PROTECTED BY LAW FROM DISCLOSURE, and (b) is intended
only for the use of the Addressee(s) named herein. If you are not the
intended recipient, an addressee, you are hereby notified that reading,
using, copying, or distributing any part of this message or any information
transmitted herewith is strictly prohibited. If you have received this
electronic mail message in error, please contact us immediately and take
the steps necessary to delete the message completely from your computer
system. -
Rename the Field Label in the sales order application.
Hi,
Please suggest me how to rename one of the field name in the sales order application.
I have add a new field called YOUR_REF_SHIP and simultaneously have to rename it from your reference to Carrier Account No. this field is available in the filed group SLO_DETAILS_GENERAL1.
This field is located in the General data tab of the sales order application.
I have created the Text Key in the Define Interface Texts and used the same text key in the Rename Field Label, but it is not working.
and i dont want to change it with the CMOD transaction.
Please suggest me where i have went wrong.
Thanks.
AnilkumarHello Anil,
The field groups are to be regenerated.
However, I have done a similar thing and in the past, the layout generation helped me. In the recent example, the name is not reflected as per the interface text.
Let me know if you find anything on this.
Regards
Priyanka -
How to display the field "Country" in the Address Book UI ?
How to display the field "Country" in the Address Book UI ?
Using an add-on, MoreFunctionsForAddressBook gives you that opportunity.
-
Is there any way to read the field name,through the property binded to it.
Hi
I want to know that,is there any method exits with which i can find the field names of the screen,if i have the property attribute with me.
as my req is to make the validation for the property attr,& check how many fields are binded with the single property attr,i have read the property attr dynamically,now need to find the fields linked,& need to check how many fields have not field value,& through the error msg.just read the attribute binded to properties using code wizard ( Control + F7).
Code generalted will be like :
DATA lo_nd_cn_check TYPE REF TO if_wd_context_node.
DATA lo_el_cn_check TYPE REF TO if_wd_context_element.
DATA ls_cn_check TYPE wd_this->element_cn_check.
DATA lv_ca_check LIKE ls_cn_check-ca_check.
navigate from <CONTEXT> to <CN_CHECK> via lead selection
lo_nd_cn_check = wd_context->get_child_node( name = wd_this->wdctx_cn_check ).
get element via lead selection
lo_el_cn_check = lo_nd_cn_check->get_element( ).
get single attribute
lo_el_cn_check->get_attribute(
EXPORTING
name = `CA_CHECK`
IMPORTING
value = lv_ca_check ).
Here i have read attribute CA_CHECK. -
How to dynamically hide the Field Label in the overview page's form view?
Hi Experts,
How to dynamically hide, for certain condition, the Field Label in the overview page's form view?
Please reply me.
Regards,
VishalHi Vishal,
It is not possible to dynamically hide/display fields if the UI is build using configurations.
The work around is to have multiple configurations, and based on the condition, load the
corresponding configuration at runtime.
The other approach is to code the complete htm view(htm coding) without using the configuration provided by the framework.
Regards,
Leon -
Can the fields grow with the section expanding?
Post Author: KennyG
CA Forum: General
Can the fields grow with the section expanding?There are several fields in one section of my report, all the fields are formatted with "Can Grow" checked and bottom border showed. In design mode, all the bottom borders stick to the bottom of the section. However, when print, the section may expand as some fields grow, but the rest fields can not expand automaticly with the section, so the bottom borders will not be at the same height as before. How can I deal with it? Is there any option about this?
Any suggestion would be greatly appreciatedPost Author: MikeA-ICE
CA Forum: General
One thought I have is to insert another section just below the one where the growing fields are and put a single line or individual lines under those fields. Move it up to the top of that new section and move the break between the existing section and the newly added one tight up against the bottom of the 'can grow' fields.
Another possiblity lies in the fact that the "Can Grow" option has a formula attached to it. I don't know if it will work or not but maybe an If/Then formula could tell field B to grow if field A grows. I've never tried that but it may be possible. I'd think the first suggestion would be the one to try first.
Mike
Maybe you are looking for
-
How do i remove my linked in contacts from my iphone
how do i remove my linkedin contacts from my iphone?
-
Hello all, I plan on upgrading my Powermac G4 AGP to a 1GHZ Processor. Now, I could get an MDD for about the same price, but with some of the upgrades I put into the machine, it is a bit safer of a choice to just keep it. Does anybody have a Sonnet p
-
Date should be in this format DD-MON-YYYY HH:MI:SS
Hi All, I am having a column date data type ,in that i am using SYSDATE and formating as DD-MON-YYYY HH:MI:SS but result iam not getting in this format,any one please help me regarding this.. Thanks in Advance.. Edited by: 30021986 on Oct 14, 2012 1:
-
Dear SAP Gurus, We are getting the following error in Check Database in DB13 BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, value: 14254080 (>< 4096,512 KB) The current Parameter : 14254080 We have change the parameter as per
-
Hey, I'am actually using navigation targets through the column properties. I hve 5 targets on it. Everything is fine but I would like it to open in a new window. Is that possible? Thanks!