What is the file name of the Profile file containing past e-mails etc

I backup to an external drive in uncompressed plain language format. My e-mails beyond 2014 have been lost from my C Drive but still exist on my external hard drive. But I can't find them as I don't know the Profile file name

Does the backup contain your Thunderbird profile at all?

Similar Messages

  • What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro?  I need to transfer files from the old hard drive to the new computer.

    What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro?  I need to transfere files from the old hard drive to the new computer.

    No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
    I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
    I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
    synghem wrote:
    Thank you LowLuster,
    At the apple store they said I needed an esata to usb wire.  But looking at wires on line has been confusing.  Is sata the same as esata?  How do I know if I need a usb 3 or usb 2?

  • What is the default name of the folder where the cache (i.e. Firefox's temporary internet files) is stored?

    What is the default name of the folder where the cache (i.e. Firefox's temporary internet files) is stored? Basically, what folder is Firefox's equivalent of Temporary Internet Files?

    You can find the location of the cache on the about:cache page (open that page via the location bar like a website).
    Only large image and media files are stored as individual files on disk.<br />
    Other files are stored in a few large container files (_CACHE_XXX_) in the cache folder and not as separate files on disk.<br />
    The individual files on disk have random names without a file extension for security reasons: you can't open an application or start a downloaded virus inadvertently by clicking a file in the cache folder.<br />
    You can look at this extension for easier access to files in the cache.
    * Cache Viewer: https://addons.mozilla.org/firefox/addon/2489

  • What is the file name of the thunderbolt driver?

    Does anybody know the file name of the thunderbolt driver that will allow me to access a thunderbolt drive from Windows? The BIOS see's the Promise controller/drive, but device manager doesn't see it. The boot camp support files from Apple are not installing automatically - it fails with no specific error except try again. I'd like to try and load the thunderbolt driver manually. Does anybody know the file name and folder this driver would be in?
    Thanks.
    Stephen
    27" iMac purchased from Apple in August 2013
    32GB RAM
    OS X 10.8.5
    Promise R6 12TB
    Windows 7 Pro

    scroll down they have a special faq for thunderbolt in windows
    http://support.apple.com/kb/HT5219
    found using this google search if you want other sources
    https://www.google.dk/search?client=opera&q=name+of+the+mac+thunberbold+driver+i n+windows&sourceid=opera&ie=UTF-8&oe=UTF-8#q=thunderbolt+driver+in+windows&spell =1

  • I started downloading my Upgrade to Photoshop Elements Version 13 and received my upgrade confirmation and cannot locate the download on my PC running Windows 7,what is the exact name of the download and where should I find it?

    I cannot locate the upgrade to Photoshop Elements 11 to Version 13, which I purchased today and started the download as per the Order Confirmation. My order No. is AD014117711. I am running Windows 7 on my PC and cannot locate the Download. How do I find it? What is the exact name of the Download?

    EdWeidman by default the download will be saved to your Download folder.  I do not know the exact name of the file which was provided to you.

  • The File name property is not valid. The file name is a device or contains invalid characters

    I have an SSIS task that has run successfully for years. They just moved the dtsx to a new server and now it is failing. 
    Issue:
    The task has a data flow that writes a raw file destination. It then has a subsequent data flow that reads the raw file destination. 
    The path and name of the raw file is passed to each of the data flows via the same variable. 
    The raw file resides in a folder on the server in the same path that the dtsx resides in. 
    The task fails with the "The File name property is not valid. The file name is a device or contains invalid characters" error when trying to access the raw file.
    What we have done to troubleshoot:
    1. I ran the task successfully on my local machine so it is definitely a server issue.
    2. The first thing we were seeing was that it failed trying to write to the raw file. The task is set to "Create Always". 
    3. We saw that the dba's copied over the entire directory structure from the old server which included a previously created raw file, so we deleted the raw file.
    4. We reran the task and it successfully wrote a new raw file but then failed on reading the raw file with the same error as above.
    5. We reran the task AGAIN and this time it failed trying to write the raw file throwing the same error as above.
    6. The dba looked at the directory and the account that performs the task has full control.
    7. The dba looked at the raw file that was created and verified that the account that performs the task has full control of the file and that it is the owner of the file.
    Summary:
    The task fails when trying to access the file EXCEPT when the file does not exist. In that situation it can write the file but subsequently fails in accessing it again.

    Hi Whalensdad,
    Based on my research, the issue can be caused by the following reasons:
    There are some invalid characters in the File name at package runtime. In this scenario, just as Russ said, could you please post the value that is in the File name variable? Also use a Script Task with Messagebox.show to show the variable values at runtime.
    May be it changes to others at run time.
    The account runs the package not having access to all the folders in the path. Since you are moving the dtsx file from one server to the current server, do you also move the raw file to the same folder in the current server? Does the user runs the package
    have access to all the folders in the path? To solve this, please ensure that the user has access to all folders and the raw file in the path on the current server.
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support
    Please see the response above. I can't use a message box on a server so I logged the values to the database. The resource account has full control to the folder. I haven't been able to get the DBA to check the SQL Agents permissions, but I was always under
    the impression that if you use "Run As" on the task, it will not use the SQL Agent but the account you identify it to "Run As". The "Run As" account has full control on the folder and file.

  • How to pass the local file name to the workflow in TC OAWD

    Hi everybody!
    I have to pass the local file name of the image as a parameter to a workflow in TC OAWD.
    By debugging I found the FM which starts the workflow -  'ARCHIV_PROCESS_FAXINPUT' . It has two importing parameters : FRONTENDPATH and BASICFILENAME, but they are not used by calling the FM.
    Do you have an idea if there is a DDIC table, which contains the local file name or another way to solve the issue.
    Thank you in advance.

    Hi,
    Not sure of what you want.
    Have a look at v$session view. Machine column is maybe what you're looking for.
    If you want to retrieve the local host executing remote desktop, it's actually not possible natievely, since it's still remote host that is connecting to the database.
    Hope it helps.

  • Dynamic File Name - Suppress the Substitue varible

    Hi All,
    I am doing the scenarios like File name at the recevier end would be dynamic for that i take an extra field NAME mapped with UDF which return the file name dynamically. It is working fine and doing good. But the problem here is , this field is the first field in my target structure so i am getting an empty line in the target file.
    So My structure as follows:
    <b>MT_BNK01           1..1
      NAME                1..1
      RECORD             0..Unbound
          --Record_data  0..Unbound</b>
    So in the recever side i written as follows
    Recordset Structure:: RECORD
    <b>RECORD.fieldSeparator = 'nl'
    RECORD.endSeparator = 'nl'</b>
    But according to this weblog i can suppress the empty line but it is not working
    /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
    means, NAME is also in the same level of RECORD in the Structure. So How can i pass the structure as ??
    I tried to pass the RecordSet Structure: NAME,RECORD
    and following parameters, it is not working
    <b>NAME.fieldFixedLength =0
    NAME.fieldLengthTooShortHandling = Cut</b>
    Can you please  suggest me what could be the reason. Tell me what information i need to pass the RecordSet Structure and attrubute information also.
    One more thing like, My sender side it is not picking the empty lines. What could be the reason. I given fieldSeparator and endSeparator as 'nl'. So to catch the empty line what i need to do???
    Thanks in Advance,
    Best Regards,
    Vijay

    Hi Vijaya,
    This can be solved. Actually i had the same scenario where i was getting blank line for the header. Suppose Header was carrying the file name after i cut the value i would get a blank line in file.
    So i added in content conversion parameter the following line
    Header.endSeparator - '0'
    then the first line was not blank.
    Try this, i think your issue will be solved
    Regards,
    Ramesh P
    Message was edited by:
            Ramesh Parashivamurthy

  • Add file name to the element in target message

    Hi all!
    I try to configure scenario:
    Get all files from directory (it will not be the same number of file every time) and mapping this file to the ERP system. I use File adapter to do this. But what Is necessary I need to mapp the file name to the element in target message.
    I mean: When I have got the RFC structure imprted from ERP and there I have got the element "filename". I would like to put the file name of file which I mapping to this element. Next put the all file contents with file name to the ERP table.
    It is possible to do that??
    I found in sap help that I can keep file name in the message header to get the same target file name, but I wont to put file contents (with file name) to the ERP table not to another file.
    THX for all your opinions.

    The DynamicConfiguration fin inbound message:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Inbound Message
      -->
    - <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="Directory">/usr/sap/PXD/put/archive</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileEncoding">ISO646-US</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileTimestamp">20061212T121622Z</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileType">txt</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">200610.TXT</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileSize">124</SAP:Record>
      </SAP:DynamicConfiguration>
    and for Response:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Response
      -->
    - <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileSize">124</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileType">txt</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileTimestamp">20061212T121622Z</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileEncoding">ISO646-US</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">200610.TXT</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="Directory">/usr/sap/PXD/put/archive</SAP:Record>
      </SAP:DynamicConfiguration>

  • Get File name of the inbound file during mapping

    Scenario: to read the file name of the inbound file (which has date required for the mapping) during runtime.
    The requirement is to read the date of the inbound file (passed to the XI pipline by the file adapter) and populate the same in the outbound mapping structure.
    Any idea about how to do this?
    (I went through few options of using java.util.map. not successful yet)

    Hi Anand,
    I posted the same question a time ago, without any help....
    Can I find out the full filename of input file in message mapping?
    Posted: Nov 23, 2004 1:00 PM
    I have in XI 2.0 the following scenario :
    In the inbound fileadapter I read my input file. The filename of the input file is part fixed, part variable (Like INDATA01.txt, INDATA03.txt, etc).
    So in my Adapterconfiguration, I specify the filename with a wildcard (INDATA*.txt).
    What I now want to do, is in my Message Mapping use the full filename , so I can do something different for every filenumber. Is there a way where I can get the full filename available in my message mapping (I did not find the filename in the XML in the message trace).

  • Should the web page address be included in the file name in the meta data dialog box?

    In the page properties > meta data > below is a field with the label file name: (the the area to type in the field), after the field, it is labeled .html.
    I have 2 questions here.
    1. If I type in http//:www (my page url), do I include .html at the end? I didn't know if this is automatically added because it is off to the side of the field?
    2. If I type in the entire URL address: http//:www (etc, etc).html,    after closing the page properties dialog box, I make it a habit to double check my work. What happens is the http//:www.xxx changes to (htttpwww.xxx). It drops the //: on the URL.
    So would it be better to just type in www.xxx (without the http//:www.xxx)
    and do you type in the .html at the end?
    I am assuming this will help with SEO page ranking or at least makes it easier for the search engines to crawl your site??
    I hope this makes sense.
    Advise would be very helpful.
    Ben

    You are absolutely correct with the URL Ben. Taking your above example, you just need to type in "Services" in the file name and the webpage will be exported as services.html and the URl will be  www.xyz.com/services.html.
    All the webpages (be it parent page or child page) gets physically saved at the root directory of your website on the server (where your website resides).
    This name is just the name of the file using which it is physically stored and called from the server. It does not help search Engines to crawl deeper inside the website.
    As I explained, "name which you wants the .html file to be stored with" here means the name of the physical file which is getting saved on the server.
    Most users leave the file name same as Page name. If you have it different from page name then this will be the workflow :
    Page Name : About
    File Name : test
    domain : www.mysite.com
    Now if you are  using a Menu Widget, it will list "About" in the Menu. And when end user will click on "About" then it will call the file named "test.html" from the server location (where all the files of your website are stored).
    And it will open a page with address "www.mysite.com/test.html"
    Hope I am able to explain the concept of File Name here. Please let us know if you have further queries on this.
    Regards,
    Sachin

  • How to specify file names for the generated code in wscompile

    Hi,
    We want to follow a certain file naming conventions for the artifacts generated by wscompile.
    How is it possible to set the name for the service interface file, service implementation file etc....
    This is possible in AXIS ant task Wsdl2Java. How do we do it for wscompile.
    thanx

    Thanks Chris and c. Under Description I'm presented with three Names for the profile: ASCII, UniCode and Mac Script. ASCII and Mac Script are the same name for the profile, with nothing being in the UniCode Name box. Which do I change -- both?
    Am I going to screw things up in Photoshop if I change these names to something I can comprehend? Looks like I may just have to make a sticky-note list of the cryptic profile names with my own descriptive name as a reference. Thanks.

  • File Name in the Send Port with PGP Encryption

    Hello,
    The File Name in the Send Port should be set with the mask like ABC.txt.pgp. Since I have used the PGP Encryption Component it is generating the File name like ABC.pgp.txt.pgp. But what I need is just the ABC.txt.pgp. How can be this be done. Any help is
    greatly appreciated.
    Thanks

    What you are seeing is the expected behavior.  If you are referring to this:
    https://code.msdn.microsoft.com/windowsdesktop/BizTalk-Sample-PGP-ebcbc8b2
    or one of it's derivatives, it will internally modify FILE.ReceivedFileName to append .pgp if that property is set.
    So, if you use just %SourceFileName%, you will likely get the desired result.  Otherwise, you will have to explicitly set FILE.ReceivedFileName to ABC.txt somewhere before the PGP component.
    You can also modify the source code to remove this behavior.

  • Not to display the file name in the browser bar.

    Hello,
    Merry Christmas to all,
    Is it possible not to display the file name in the browser bar?
    Like say, when we write www.rediff.com, the index page name is not displayed.
    Likewise is it possible for any other page too.
    What I want is not to display any of the page name for the whole application.
    Whichever page is requested the page name should not appear in the address bar of the browser.
    How will I do that, what logics should I apply?
    Please suggest,
    Thanks,

    first, what does this have to do with Java?
    second, no; in order to display something, the browser needs to know where it is. and if it knows, then a user can find out too. maybe you can make it not show up in an address bar sometimes, but that really achieves nothing

  • How to not append '.PART' to the file name of the currently downloading file, and just download the file with its normal filename

    In Windows, when Firefox (I'm currently using 7.0) downloads a file, it appends ''.PART'' to the file name of the currently downloading file and just renames it to its original file name after it finishes downloading.
    I sometimes like to watch a currently downloading video file, so it will be better if Firefox just downloads the file to its actual filename (like what Opera does), so I can easily double click the incompletely downloaded file and watch it with the video player assigned to that file extension, rather than the awkward ''Right click -> Open With -> Choose Default Program'' route with .part files.
    Does anyone know how to set Firefox to do this?

    It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox and prevents Firefox from renaming the .part file.
    Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
    See "Disable virus scanning in Firefox preferences - Windows"
    * http://kb.mozillazine.org/Unable_to_save_or_download_files

Maybe you are looking for