What is the file or registry in mozilla app that gets launch to create the APPData\Roaming\Mozilla
I do like to know what is the file that triggers when you launch the Mozilla Firefox for the first time to create the folder under AppData either Local or Roaming because i want to change it to a different name since i want to have 2 versions of mozilla in the same computer and the old version i want it to customize for my company web application only.
I have open all the files with extension *.JS but none of them have the parameter to create the folder I have also look into every INI file inside mozilla firefox application but no info was found as well.
I have use the ORCA MSI editor to reveal the registry keys but I am not sure since many of them leads to the Mozilla folder but none to the Appdata either Roaming or Local.
Please let me know if you have some hints or files that i need to edit to modify that name to perhaps MOZ2015
Thank you in advance for your reply
The KDAoracle.exe is the same as firefox .exe but i change it since i am customizing the mozilla to fit my internal in house application that is the reason why i would like to change the name from
Mozilla to ====> KDAORA when it gets create for the first time but i need to know where does the system gets the name MOZILLA to be written or created for the first time under APPData Roaming or Local
in essence there is a file that the system look inside the mozilla firefox program files maybe a dll or extension db i have no idea what is the file that provide with the name each time the mozilla firefox is launched for the FIRST time ONLY
So once mozilla is installed you look under AppData either local or roaming there is no MOZILLA folder there but once you launch mozilla a forlder gets created there (( I want to know where does the system pick the name MOZILLA )) for the screen shot it seems like it looks inside the firefox program files but it is not clear what file gets read to create the folder))
I do like to thank you all for looking into this and giving me all the hints I want but once i get my hands on the file that gets read to provide the name i will modify and remane the name from Mozilla to the name I would like to
Thanks and regards to all
Similar Messages
-
I have tried to update the operating system on my ipad several times without success. Each time it reaches 353.2mb of 353.3mb and starts to process the file. Nothing happens and then I get a message saying the network connection has timed out. The network is still connected.
Have you tried temporarily turning off your firewall and antivirus software whilst the download is happening ? A number of people on here have had success downloading it after doing so.
-
New Panasonic Lumix DMC-FZ150 produces .RW2 RAW files, and we are dead in the water with Aperture. Dying to see what this camera can do, but have to shoot jpgs for now. Have tried to encourage Apple and Panasonic to get together:)
I don't understand this. I have GF2 but I assume RW2 files will be the same & they load into Aperture 3.2.1 & I can do everything with them. Just returned for 9 National Parks with 1000's & working on them no problem.
Are you running latest Aperture?
There are quite a few posts about no support in Aperture for RW2 files but I have been importing every RAW I shoot on Nikon & Lumix. I noticed one for the G3, but people in our camera club are inporting RAW in to Aperture from this camera. I will need to check if they do as I do.
In the Import screen I have Both(as separate Masters) clicked, no probs -
Getting error while creating the variable of Schema Element type
Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho -
I just installed iTunes on my new laptop. When I click on the desktop icon I receive a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes". I have no idea what this means or what to do about it. I can't even find a file on my computer like the one referred to in the pop up. I am currently considering keeping my old laptop if it is the only way for me to continue to access iTunes. What should I do to fix this?
What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future. -
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
I get a message "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." Please advise what I need to do to get around this issue - at the moment iTunes wont open up!
Hi did you ever get a solution to this problem? Having the same issue myself!
-
I had to reinstall iTunes cause during update it was shut off by mistake, now it won't come up and says,"The file "iTunes Library .itl" cannot be read because it was created by a newer version of iTunes", what do I do?
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
When I plug in my iPad 2 to my laptop to sync, it says "the file iTunes library itl" cannot be read because it was created by a newer version of iTunes. Can someone please tell me what this means? How do I correct it? Thanks!
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
itunes tod me i needed to re-install it, so i did but everytime i click on itunes on my desktop it comes up with "the file itunes litbrary.itl cannot be read because it was created by a newer version of itunes" what do i do now?
If you've already installed the latest version then the message may be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
tt2 -
Whenever I click on the Itunes icon, a window pops up saying that `The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes`. I then click ok and the pop up vanishes. Any ideas as to what I should do?
What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future. -
I updated to the newest version of iTunes and now I can not open the program. I get the message "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes". What now? I'm using Windows Vista.
Had same problem and solved it without having to reinstore any music or movies:
1. Delete old Library file
2. Go to the 'Previous iTunes Libraries' folder and copy one of the earlier files - note, they have a date extension, e.g. 'iTunes Library 2011-11-01'.
3. Paste this file in your iTuners folder and rename file by removing the date extension - 'iTunes Library'
You should have all your music and paylists in tact, unless it was a really old previous file. -
i've tried multiply times to update itunes 10.5 but it keeps saying that it can't find the file and i can't reinstall itunes because it will delete the 100 gigabites of info on it what can i do
I've had all kinds of trouble keeping my iTunes software current over the past year, but have found the easiest way to remedy the issue is to simply download the latest version of iTunes as though I am a first-time user and then just install it into the directory my current version of iTunes is using. Doing this has allowed me to update my software without losing any of my media/data. Hope this helps! Best of luck!!!
-
I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?
I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
Edit: I just removed every project I have from the Media Browser. Still no luck. -
Help me, please. I uninstalled old iTunes because of troubleshootings. I have downloaded and installed new one. Now it says: The file "iTunes Liberary.itl" cannot be read because it was created by a newer version of iTunes." What can I do?
Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario
Maybe you are looking for
-
Installing Yosemite on MacBook Pro didn't succeed.
With my Macbook Pro running smoothly under OSX Mavericks, I tried to upgrade to OSX Yosemite with a clean installation by an Install OSX Yosemite USB stick. But after about 8 minutes of installation I got an message on my display that there are probl
-
Quantization. I am at a loss to understand it
I know it snaps the timing to the nearest beat but I havent really moved on from there. I beleive its a fundamental of any DAW user to grasp. I subscribe to many video tutorials including MacProVideo, Groove3, MacforMusicians and AskAudio. I learn "b
-
Connection and reconnection taking a lot of time
Hi ppl. I am on a POC with 5 machines plus the Active Directory on a Win 2003 server, the vdi hosts and the storage server each of them reside on a LDOM (four in total) created on one sparc blade on a sun blade 6000, each vdi has 4 gb of memory and t
-
Give condition for date.
dear all, if i hve to give condition for some system date that it hould be valid for some limited period ,like for any festivel.in a range.but presently i m taking any date input. with which condition i shld compare and wht will be syntax. thanx.
-
Hi all friend and Laxmi I have a problem that how to calculate that where a price in including the tex amount e.g Amount 100 (including tax) Tax 4% then how to calculate Net value (Amount- Taxes) Hope you all understand is there any alt cal ty