What is the getcamera input format & output format?

when we get video from webcam by getcamera(), what is the input format?
output format should be the codec, like: VP6, H264, right?
thx

Hello,
Please refer to this Help document on getCamera method:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/Camera.html
Regards,
Suhas Yogin

Similar Messages

What are the video/movie formats that iBooks Author uses?

What are the video/movie formats that iBooks Author uses?

strange... when I click on it it goes to the correct page:
http://support.apple.com/kb/HT5065
http://support.apple.com/kb/HT5065

What are the differences in format options available for partition?

what is the differences in format options available for partition?

Select the drive in Disk Utility, click on the Erase or Partition tab, select the Format type: dropdown menu that will list your format options. For OS X the only option you should use is Mac OS Extended, Journaled. This is the standard format for OS X drives.
Then there are options for Windows - MSDOS (standard FAT format) or ExFAT (an advanced FAT system with most of the characteristics of NTFS.) OS X can read and write with either filesystem. NTFS is only readable, not writeable, by OS X.

What are the steps in formatting my iphone

what are the steps in formatting my iphone

"Formatting"? - it's not a hard disk, so formatting is not necessary.
If you mean you want to restore the phone to "factory defaults", see: http://support.apple.com/kb/HT1414

What is the best format to import images into iBA? How should I compress my images before importing? What is the best file format? PNG? Jpeg?

What is the best format to import images into iBA? How should I compress my images before importing? What is the best file format? PNG? Jpeg? I'm trying to figure out the best file format / compression for importing images into iBA. Also, does anyone know how iBA will compress the file? Are the assets attached (like a website) or flattened out? Does anyone know how iBA handles this? Many many thanks to anyone with insight into this.

This question is largely answered by the following thread...
https://discussions.apple.com/message/17805700#17805700

What is the best file format for photos?

Greetings.
I am going to be importing some photos into FCE 3.5.1 to do some effects and motion. What is the prefered file format form Photoshop for FCE? TIFF, JPEG, and PS format all import, but I'm just wondering if one is prefered over the other.
My images will be pretty big, 3000 pxels x xxx at 72dpi, so I can move in and out, and maybe pan.
Thanks.
Jonathan

PNG, PSD. Don't make the image larger than you need to.

What's the Best Audio Format?

I have been recording audio tracks as aiff format.
What's the best audio format... .aiff - .wav sdII or the newer .caf?
Considering:
- sound quality
- portablilty to other app's and platforms (protools - PC's etc.)
- other stuff.....

mp3...lol.
okay, well, it will really depend on what you're looking to interoperate with.
only logic, pt and dp support sdII...it's basically old school, and most likely on its way out.
caf is apple's new audio file format, which looks pretty intriguing. however, afaik, noone else supports it yet, and wintel machines probably never will. it's new, so i'm not sure of the ins and outs, really.
bwav is pretty much the standard on pc's now...and i think just about everything but dp supports this natively (you can import them into dp as of v5.1x, i believe. bwavs contain timestamps, so that when imported into a project, they can go where they are supposed to on the timeline.
for completely universal compatibility though, aiff is still the way to go. it is supported on both wintel and mac, and afaik, pretty much every daw can handle these.
kell

What is the best video format/codec?

Greeting Video Producers
Please tell me what is the best video format/codec overall? And please list them from best to worse.
MPEG 4
MPEG 2
AVI
DVI
QUICKTIME MOV
WMV
THANK YOU

DVI isn't a format or codec; it is a digital signal protocol used for video display. DVI = Digital Video Interface.
Please define what "best" means in your context ... "best" for what?
WMV is one of the best in terms of viewer compatibility for web video, but it is not any good for DVD delivery.
MPEG-2 is one of the best for broadcast server-based playback and is required for DVD-Video delivery, but it is one of the worst for editing.
MPEG-4 is a more efficient codec than MPEG-2, but isn't as compatible for web delivery as WMV or Flash.
AVI is a container.
MOV is a container.
-DH

For iPhone and Android, what is the best file format for watching videos?

For iPhone and Android, what is the best file format for watching videos?

You can try these setting. They are from CS5.5 but should work in CS4.
Make sure you check Use Max. Render Quality.

Data types used in a sub VI - selecting the correct input and output types?

data types used in a sub VI - selecting the correct input and output types?
I can never work out how to choose an input or output format for Subvi's.
I want to create a SubVI for the code in red. I needs an VI Server Reference compatible input and an output that goes to a waveform.
Thanks in advance.
Attachments:
data types.PNG ‏11 KB

GerdW,
I realise now I have taken us in the wrong direction. apologies for that.
History, this is not my code and I do not own the process and NOT my preferred method of using it. I was looking for a simple way to make subtle changes.
What we do - We use these programs to collect data from typically 6 pressures and 6 temperature probes and capture RS232 / USB VISA strings from sensors.
So every few weeks / months or up to a year we rearrange each sensor location to suit the new process. I did not write the code. I cannot change the procedure too much without resistance.
So headers in the CSV file have the DaqMX string passed through the code. Great.
Other data to the CSV file comes from calculations or extracted from the VISA string. Hence why we have headers with "Untitled 1 ()". These values also go to a History Chart.
So I was looking for a simple way to read the the local variable label as it is always linked to the front page indicator. People can cope with editing the indicator label, save the VI and hit run.
TL;DR - GerdW is now a psychologist.
Attachments:
data to csv and history chart.png ‏1043 KB

What's the best way to output a high quality ready to send to the printer PDF?

I'm designing a photo book for a friend and we're having output issues. We're working with a professional printer but for some reason our prints keep coming out soft or pixelated. The images are 300 dpi and formatted correctly for an InDesign document so the issue is likely output.
What's the best way to output the HIGHEST quality PDF you can out of InDesign? Everyone seems to have different answers.
Thanks in advance!

Check a couple things.
One would be for broken links. If there are broken links then ID will use the preview image instead of the linked image.
Another would be to select an image that prints poorly in the Links Panel and check the effective resolution. If it is below your stated 300 dpi then the image has been enlarged greater than 100%.
Then just use the PDF/X-4 profile for your PDF.
Mike

Invoice list: What is the standard setting for output type LR00 ?

Hello all,
They have messed up our system. What are the standard settings for output type LR00 ?
Program RVADIL01,
Form ??
Thanks
Rad

Dear Rad,
> Program RVADIL01,
> Form - SD_INVOICE_LIST
Thanks,
Raja

What's the voltage input needed to run and charge the iPad 4?

What's the voltage input needed to run and charge the iPad 4?

As long as the charger is rated for at least 10 watts or 2 amps it well charge the iPad just fine. A higher rated charger such as the 12 watt 2.4 amp charger will also charge the iPad, possibly a little faster, but it will not damage it. Chargers rated at 5 watts or 1 amp may charge an iPad very slowly if not at all.
Just be aware some cheaper dual port USB chargers share the 2 amps. It will charge an iPad in one port but adding another will reduce the current to both ports to 1 amp. An iPhone may charge fine but the power would be reduced to the lower level and slow an iPad charging on the other port. The one you link to will work fine although it looks as though one port is 5 watt/1 amp and the other is 10 watt/2 amp. There are many adapter's available that will supply 10 or 12 watts to both ports to future proof the charger giving you the capability to charge 2 iPads or other more demanding smart phones with larger batteries. I like Scosche reVolt chargers, they cost a little more but they are a quality product. If you want the best option go with a 12 watt charger which can speed up charging on many products a little more than a 10 watt can.

I have a 2007 iMac connected via WiFi. It has been working fine until I turned it on after a recent vacation. Network preferences indicates that it is correctly connected to my WiFI system but the data input and output rate is virtually zero. I know that

I have a 2007 iMac connected via WiFi. It has been working fine until I turned it on after a recent vacation. Network Preferences indicates that it is correctly connected to my WiFI system but the data input and output rate is virtually zero. I know that the WiFI signal is reaching the iMac since both my iPhone and iPad are working perfectly at that location. I have rebooted the router and the iMac to no avail. Any suggestions would be greatly appreciated. Thank you very much. Geoff

Hi Geoff,
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

What is the best video format for 50+ year movie storage?

Objective: In what video format should I store my family movies on an external drive? I want these family movies to be viewable by future generations in 50 - 70 years, so what video format / type is recommended?
Background: I have an iMac, OS X 10.7.5. I use IMovie '11, version 9.0.8. My iMac has an internal DVD player and burner and iDVD is installed.
I have dozens of family movies (total 80+ hours) dating back nearly 70 years. All these films have been digitized and I have imported many of them into iMove as events, then I edit them with title pages, transitions, music, etc. When a "project" is completed (Between 1.5 - 2.0 hours or less) I share the project to iDVD where I burn it to a DVD. Within iMovie I save each of these projects (on the internal Mac HD, which consumes very little space) and on an external drive I save for each project:
- a disc image (DVD.img) whose size is about 4.5 GB
- a copy of the iMovie project, whose size is about 60 MB (the original project is in iMovie, in the Mac internal drive)
- the original digitized raw movies imported into iMovie as events and are formatted as .mov (these are large size at 8 GB - 20 GB each)
- the finalized and fully edited iDVD which is formatted as DVD.dvdproj (these are very large size at 20 - 24 GB each)
As you can see with all these disc images, projects, events and DVD projects stored on my external drive I am at nearly 1 TB of storage, on my way to 1.75 before I comple editing all movies.
While I manage pretty well the editing my movies within iMovie, and how to create an iDVD project and then burn a DVD, I have no understanding of the technical aspects of the multitude of different movie formats in the market nor of Quick Time and its format.
I am told that DVDs will only last 10 - 15 years and then begin to deteriorate. And iMovie '11 won't be arond 50 years from now. Nor will the current / recent versions of iDVD. Thus, for posterity:
1. In what format should I store my family movies on an external drive so they can be viewed by family members 50 - 70 years from now? (best chance for viewing, since we don't know what formats they will have then)
2. How do I convert from what I have (disc image, iMovie project, DVD project) to your recommended format?
Thank you,
HDP

There is no such format for movies or even Photographs. Frankly we can't guarantee the persistence of any format past the next 10 years, not to mind 50 - 70.
Codecs are being improved and created all the time, and this process will continue. In 50 years time we may still have .mov and .avi files, but the codecs that create the movies within will have changed.
One thing is reasonably sure: DVD will be as deader than floppy disks are now. Ditto Blue Ray. They're on the way out now, and in 10 years they'll be curiosities.
So, what's the solution:
Best I can suggest is to keep your movies on volatile media like Hard Disks (with back ups on other disks, or course). Progress will be evolutionary - as new formats come along there will be the option to migrate older data to these newer formats, and that's the trick. As always, when it comes to migration, the more data available the better the likely result, so keeping your movies in the least compressed versions possible seems a good approach.
That and a dollar will get you a cup of coffee someplaces, but nowhere fashionable.
Regards
TD

What is the getcamera input format & output format?

Similar Messages

Maybe you are looking for