What is the harddrive's RPM on most recent macmini?

I would like to get back into circulation having been away from computing for almost a year. I bought a "new" macmini in May'2005 and believe the speed of the HD is 45RPM. Was wondering if the newest mini has a faster HD.
Thank you.

Intel minis are all specified as 5400rpm units.
G4 minis did not have a drive speed specified, and it was not at all clear which drive speeds were actually used since it depended on which drives Apple sourced at various times during the production run.
However, many G4 minis also had (or appear to have) 5400rpm drives, including at least some of the original 1.25 model. The difference between the slower and faster drives used in these models was not as significant however as the difference between 5400rpm and the current 7200rpm drives.
If drive speed is of concern to you, and you don't want to open up the mini and upgrade to a faster drive internally, you could always buy an external drive - preferably a Firewire device for better data speed) and use that as the mini's boot device. That would give you a reasonable boost in performance, even with your existing system.

Similar Messages

  • What is the Keyboard shortcut to go back to the previous tab (I mean most recent tab)?

    I normally work on Firefox with more tabs than one open. I want to switch between two open tabs frequently. Is there any shortcut to do so? eg. "Alt+Tab" to open most recent window on Windows OS.

    * '''CTRL + Tab key''' -> for Switching to Next tab
    * '''CTRL + SHIFT + Tab key''' -> for Switching Back to Previous Tab
    Check and tell if its working.

  • I have always been able to connect my Ipad to the tv with the HDMI adapter but since most recent software update it does not work.  Is it me or has others expeirenced this?

    I have tried to stream movies and live TV using my HDMI adapter and cable .  I have always had it work but with the most recent update it no longer will connect.  I hope someone has a good solution.

    It still works for me.
    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

  • What is the best way to restore very recently deleted partition ?, What is the best way to restore very recently deleted partition ?

    Can anyone please advise the best course of action here:
    I time machined what I thought to be my Mac Pro 1,1 but actually backed up my Macbook Pro 3,1
    I was having problems with main hdd and repair was not working so i deleted partition... and when i ran time machine realised i had not backed up from march.
    Is there anyway to revert to that partitioning or restore it? Any programs?
    Or do I just have to recover the lost files ?

    If the lost data is of high value to you, consider sending the drive to a professional recovery service such as DriveSavers. Otherwise, there's little hope, but some have had at least partial success with a product called "Data Rescue."

  • Is there any fix for the bluetooth connectivity issue after most recent OS update?

    Seems to be a common problem particularly with bluetooth headseat connectivity. Any ideas?

    There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
    I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
    If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you.

  • When the Firefox updated to its most recent version (5.0), it did not recognize AVG's Online Shield as a compatible component and so disabled it during the upgrade.

    The Shield shows as active in AVG settings, however the Page Status in the browser now always shows as if it is searching, with a little clock icon, but is unable to determine and display a status. Attempts to disable, restart, re-enable and restart have not been successful.

    AVG recently updated both its paid and free versions to make the "Safe Search" add-on compatible with Firefox 5.
    FREE Release Notes:<br>
    http://forums.avg.com/ww-en/avg-free-forum?sec=thread&act=show&id=110701 - "10.0.1388"
    PAID Release Notes:<br>
    http://www.avg.com/ww-en/avg-release-notes - "2011.1388 Hotfix 2011-07 "
    Does that repair the "Online Shield" as well?

  • What is the model number for the most recent Apple TV devise ???

    What is the model number fo rthe most recent Apple TV devise ???

    Apple TV 3 (A1469 - AppleTV3,2 - MD199LL/A)

  • My iPad drops in all apps regurarly down. What is the problem?

    iPad is drop down all the time in all apps. What is the problem?

    This helps most of the time:
    hold the Power button AND the Home button at the same time, keep holding,
    ignore everything on the screen, keep holding until you see the white Apple logo, then let go and let the iPad start fully.

  • I forget my psscood what is the sulution? please help me

    i forget my psscood what is the sulution? please help me

    You will need to restore your iPhone from the same computer that you most recently synced to.
    Read this: http://support.apple.com/kb/ht1212
    If you can't sync then you will need to try recovery mode.
    Read this: http://support.apple.com/kb/ht4097

  • What is the restriction

    hi
    when i go to setting<general<restriction
    what is it?
    what is the restriction??

    You will need to restore your iPad from the same computer that you most recently synced to.
    Read this: http://support.apple.com/kb/ht1212
    If you can't do the restore then you will need to try recovery mode.
    Read this: http://support.apple.com/kb/ht4097

  • What is  the best, set up for beginers?

    What is the best  set up ,for most , older people?

    What Adobe program are you asking about?
    Also, what is your operating system (Windows, Mac OS, ...)?

  • What are the services in KM repostory?

    Hi Gurus,
    What are services available in KM Repository?
    Thanks in Advance,
    Dharani

    HI
    refer to this
    http://help.sap.com/saphelp_nw70/helpdata/EN/c1/c87d3cf8ff3934e10000000a11405a/frameset.htm
    dharani wrote :
    what are the services in KM repostory
    most  of the basic question u can find information in help.sap.com
    its better to work on search engine and then u can post here
    just type what u typed in this thread in the above mentioned website.
    regards,
    vijay.

  • What is the default passcode?

    I upgraded phones recently, but have kept the old phone in use as my bedside alarm and for music...it ensures I have plenty of battery for talking on my new phone. I updated the software on the old phone (iPhone 4) last night and woke this morning to find that with the update, a passcode has been added that prevents me from accessing the phone at all. Anyone know what that passcode is?
    I read an old thread where people were taking guesses ... telling the person asking that they must have set a passcode (I didn't), or that they must have stolen the phone (I bought this phone new from ATT). This passcode was added by the iTunes update last night. There is no other way it got in there. The question is what is the passcode that iTunes is putting in the phone with the most recent software update?

    iTunes does not add a passcode during an update so there is no 'default' passcode.
    If there is a passcode present now you will have to take the normal actions for a forgotten passcode.
    You will need to restore your iPad from the same computer that you most recently synced to.
    Read this: http://support.apple.com/kb/ht1212
    If you can't do the restore then you will need to try recovery mode.
    Read this: http://support.apple.com/kb/ht4097

  • What is the cause of unpredictable and frequent crashing?

    My firefox is crashing quite frequently and I haven't been able to determine the cause or how to fix it. I've uninstalled and reinstalled, removed all the addons and plugins and updated them, and updated my graphics drivers.
    Below is the crash log from my most recent adventure in crashing. If anyone can offer some insight, I would certainly appreciate it!
    AdapterDeviceID: 0x6810
    AdapterDriverVersion: 14.501.1003.0
    AdapterSubsysID: 04a11043
    AdapterVendorID: 0x1002
    Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:36.0,%7Bd10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d%7D:2.6.7
    AvailablePageFile: 3535675392
    AvailablePhysicalMemory: 4189724672
    AvailableVirtualMemory: 3325460480
    BIOS_Manufacturer: American Megatrends Inc.
    BlockedDllList:
    BreakpadReserveAddress: 45416448
    BreakpadReserveSize: 67108864
    BuildID: 20150222232811
    CrashTime: 1425256165
    EMCheckCompatibility: true
    Email: [email protected]
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1424907853
    IsGarbageCollecting: 1
    Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x6810, AdapterSubsysID: 04a11043, AdapterDriverVersion: 14.501.1003.0
    ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 1131
    StartupTime: 1425255036
    SystemMemoryUsePercentage: 51
    Theme: classic/1.0
    Throttleable: 1
    TotalPageFile: 8587304960
    TotalPhysicalMemory: 8589205504
    TotalVirtualMemory: 4294836224
    Vendor: Mozilla
    Version: 36.0
    Winsock_LSP: MSAFD Tcpip [TCP/IPv6] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [UDP/IPv6] : 2 : 2 :
    MSAFD Tcpip [RAW/IPv6] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
    MSAFD RfComm [Bluetooth] : 2 : 1 :
    MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [UDP/IP] : 2 : 2 :
    MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
    RSVP TCPv6 Service Provider : 2 : 1 :
    RSVP TCP Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    RSVP UDPv6 Service Provider : 2 : 2 :
    RSVP UDP Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    useragent_locale: en-US
    This report also contains technical information about the state of the application when it crashed.

    You have a lot of plugins I don't recognize, such as "Wizvera Mozilla Browser Control (1026)" and "npxwebplugin" (SoftForum XecureWeb Control?). These may be part of a bundle of unknown/unwanted software.
    Here's my suggested procedure for tracking down and cleaning up '''bad add-ons'''. Sorry for the length -- it's not as bad as it sounds:
    (1) Open the Windows '''Control Panel''', Uninstall a Program. After the list loads, click the "Installed on" column heading to group the infections, I mean, additions, by date. This can help in smoking out undisclosed bundle items that snuck in with some software you agreed to install. Take out as much trash as possible here.
    (2) Open Firefox's '''Add-ons page''' using either:
    * Ctrl+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click '''Plugins'''. Set nonessential and unrecognized plugins to "Never Activate".
    In the left column, click '''Extensions'''. Then, if in doubt, disable (or Remove, if possible) unrecognized and unwanted extensions.
    Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
    Any improvement?
    (3) You can search for remaining issues with the '''scanning/cleaning tools''' listed in our support article: [[Troubleshoot Firefox issues caused by malware]]. These on-demand scanners are free and take considerable time to run. If they finish quickly and especially if they require payment, you may have a serious infection. I suggest the specialized forums listed in the article in that case.
    Success?

  • Choosing most recent records from multiple tables?

    Let's say that you have two tables; one contains news
    articles with the fields TITLE, ARTICLE, and a timestamp DATE and
    the other contains different news articles with the fields TITLE,
    DESCRIPTION, and a timestamp DATEPOSTED.
    How would you go about selecting the (let's say) five most
    recent articles with the corresponding fields? I'm relatively new
    to CF but even the experienced guy in our office can't figure it
    out. The following code is what we were working with -- which
    doesn't quite work the way it should anyway -- but I'm thinking
    there
    must be an easier (or at least less convoluted) way.

    Thank you so much! Azadi hit the nail on the head; I hadn't
    known the terms to look for so Google hadn't been any help, but
    UNION was just the trick for this MySQL query. I had to add a field
    to each table in order to tell the link which page to go to since
    there's a different one depending on which table the record came
    from, but here's the code that works (just in case anyone else does
    a search for this problem):

Maybe you are looking for

  • I pod isnt found by windows xp anymore

    Went to put i pod as enable disk mode for date transfer. Now i want to update my i tunes music onto it. Problem now is computer thinks its usb storage device. So go to restore it like ive beent told to factory settings. Nothing it didnt work. EDit pr

  • Laptop cooling fan not working properly

    i have a hp g62-457dx laptop and when i turn it on, it states the fan is not working correctly, then shuts down after 15 seconds or continues to windows if you press enter.  I cleaned all the air vent with compressed air and still get same mesage whe

  • OBPM : fuego.papi.exception.NoPermissionException

    Scenario: 2.     Logged in as A 3.     Create a new Instance (X) - 4.     Logged out as Sales Agent. 5.     Logged in as Another user B to whom OBPM assigned automatically. 6.     Selected X in B's worklist. 7.     Assigned back to A. 8.     Technica

  • Data filtering

    I have created a reprot using command (SQL query) which retrieves all the employee details.Now i need to filter the data based on the conditions, 1) Employees joined in the Week numbers will be selected (example: 13,15,19) and the data should be filt

  • Move iCloud mail to mac

    How do I clean out my iCloud mail and move it to mac? Thanks DISREGARD this message, please. Figured it out.