What is the highest sowfware that the I pod touch 4g gets?

Hi, I wanted to know what the highest sowfware that the I pod touch 4g gets. I am on Ios 6.1.6.

That is the highest. See:
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 7.1.x
iPhone 4S                                    iOS 7.1.x
iPhone 5                                      iOS 7.1.x
iPhone 5c                                     iOS 7.1.x
iPhone 5s                                     iOS 7.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 7.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 7.1.x
iPad 3                                          iOS 7.1.x
iPad 4                                          iOS 7.1.x
iPad Mini                                      iOS 7.1.x
iPad Air                                        iOS 7.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Similar Messages

I recently bought the i pod touch 4 and noticed that not all of my songs transferred over-The songs that didn't, say original file cannot be found. What should I do?

I recently bought the i pod touch 4 and noticed that not all of my songs transferred over from my i tunes library-The songs that didn't, say original file cannot be found, when clicked. What should I do? I tried using the tips on this site, but they weren't too helpful...I downloaded the songs from cd's and purchased them from i tunes.
Any help would be much appreciated! Thank you!

I doubt that your music files are gone. Do a spotlight search and look for The Cure. What likely happened is that for whatever reason, your iTunes lost track of the location of your songs.. which happens on occasion.
What you need to do is go to the folder where your music library is - where the song files are - and check to see if they are there. If so, then go into your iTunes preferences and in the 'Advanced' pane put in the location of the folder where it says 'iTunes Media folder location'. iTunes should then be able to 'see' the songs again.
Deb.

"File Browse" type item: at what point the fields mime_type, file_name, last_update_date get their values?

Hi there,
I have an issue with "File Browse" type item, my question is: at what point the fields mime_type, file_name, last_update_date get their values? I want to add them to the collection but if I try to do it in Process "On Submit - After Computations and Validations" the values in those fields are still null (that's for the insert, and for the update they have old values). Also I don't seem to be able to add blob to the collection ("File Browse" type item (which has the source as blob database column) can't be assigned as parameter p_blob001 of APEX_COLLECTION.ADD_MEMBER, error is: PLS-00306: wrong number or types of arguments in call to 'ADD_MEMBER').
What I am trying to do is this: I have parent table (TABLE1), and child table (TABLE2). In TABLE2 I store documents. I have a main page that is form on TABLE1, and on it I have button "Add documents" that opens popup window with form on TABLE2. On submit of popup page I want to avoid inserting document into TABLE2, instead I want to send data to the main page (using collection) and insert in only once the main page is submitted.
I would appreciate any advice on this...
Thanks,
Tanya

Hello Tanya,
Can you post your PL/SQL code which you are trying?
Regards,
Hari

What is the most effective way to get my imac 2 ghz intel core duo 2 10.4.11 to be able to run 10.5 and sync with my iphone 4s?

What is the most effective way to get my imac 2 ghz intel core duo 2 10.4.11 to be able to run 10.5 and sync with my iphone 4s?

As your Mac should run Snow Leopard provided it has at least 1GB memory, that would be a good deal easier and very much cheaper than trying to find a 10.5 install disc.
Snow Leopard costs $30 approx from the online Apple store (£26 if you're in UK)
You'll need to update Tiger to 10.4.11 with the combo installer first (unless you're just erasing the disc and starting fresh) You can then update SL from 10.6.3 to 10.6.8 with its combo installer.
For comparison, 10.5 Leopard is currently running about $130 from Apple (if still available) and more on Amazon etc.
This info for Leopard courtesy of TexasMacMan;
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update

What's the WMI class name to get Client Approval status

What's the WMI class name to get Client Approval status.
Unfortunately the below example with class "SMS_R_System" does not have the approval status
Get-WmiObject -Namespace "root\sms\site_LAB" -Class SMS_R_System | fl *
I listed all the available classes and... yeah It's going to take along time to go though all the possibilities.
Note: I'm running this in powershell on the primary first
If anyone knows it... I'd appreciate your help

This is all still in the testing phase so I'm not sure this is the best solution... but here's my problem and idea to resolve it.
Currently in our environment OSD can only be run against unknown computers and approved clients.
I currently automatically approve all clients in a trusted domain. So all systems that succeed OSD and auto join the domain are approved and I can always run OSD against those machines in the future.
Problem is with the systems that fail OSD for any reason and therefore do not automatically join the domain. They end up getting a SCCM record by the name of "Unknown" and therefore cannot run OSD again until the "Unknown" record
is deleted. "Unknown" records happen too frequently to manually delete and I'm not too comfortable with just deleting ALL of them on a scheduled basis.
Additionally there are way too many OU's in my environment to automatically join our OSD'd systems to the domain. So I have a script that checks using a prestart command to see if the system is already in AD, and if so then OSD continues and simply
joins the machine to the domain in it's current OU. If not the tech is given a nasty error message telling them to add the computer object in AD in the proper OU first.
I intend to check , with a Prestart Command if the current system already has a record in SCCM and delete it if found AND is not approved yet. This should resolve the "There are no task sequences available" error I get with
systems that have an "Unknown" SCCM record.
In this way the system will be essentially approved if the system was already prestaged in AD manually by a technician and any "unknown" record for that system will simply be deleted at the point of OSD.
Note: Although I can easily use the new SCCM Powershell cmdlettts and get the "Approved" status, I need to do all of this in WinPE without the cmdletts. If this property is not available via WMI, then I'm guessing this will not work.

What is the availablility and cost of getting the glass on my 3GS replaced?

What is the availablility and cost of getting the glass on my 3GS replaced?

Apple doe snot do this.
You can buy an out of warranty replacement:
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
A $6.95 shipping fee will be added if you arrange service online or by calling Apple Technical Support. All fees are in U.S. dollars and are subject to local tax.
When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above. This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details."
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

What are the common errors we wil get in BDC?

what are the common errors we wil get in BDC?

hi sunil
BDC errors are similar to what you get in online transaction. Suppose you enter an invalid material number in online ME21N ( create Po ) system will throw an error and you have to correct it by chnaging a valid material number . Same error you can get in BDC as well. It is very difficult to generalize types of error as errors will depend on the transacation you are doing.
However some of the common BDC errors are ( Data for Screen Not Found, Field Not available in Screen ). These again are transaction specific and you have to analyze it by calling the transacion in display ALL mode.
The errors you get depends upon the transaction you are
running.
This is how you handle:
Let's consider you are recording for the transction CJ40
(Messages table declaration )
DATA :BEGIN of t_msg occurs 0.
include structure BDCMSGCOLL.
DATA END of t_msg.
Handling it :
CALL TRANSACTION 'CJ40' using T_BDCDATA MODE 'N' UPDATE 'S' MESSAGES INTO t_msg.
commit work.
If you want to display the errors in the screen you can use a function module named 'RPY_MESSAGE_COMPOSE'
This gives you the corresponding message for the message number that you input.
Below is the sample code
Loop at t_msg. " Messages internal table
w_msgid = t_msg-msgid.
w_msgno = t_msg-msgnr.
w_msgv1 = t_msg-msgv1.
w_msgv2 = t_msg-msgv2.
w_msgv3 = t_msg-msgv3.
w_msgv4 = t_msg-msgv4.
CALL FUNCTION 'RPY_MESSAGE_COMPOSE'
EXPORTING
LANGUAGE = SY-LANGU
MESSAGE_ID = w_msgid
MESSAGE_NUMBER = w_msgno
MESSAGE_VAR1 = w_msgv1
MESSAGE_VAR2 = w_msgv2
MESSAGE_VAR3 = w_msgv3
MESSAGE_VAR4 = w_msgv4
IMPORTING
MESSAGE_TEXT = t_text-text.
TABLES
LONGTEXT =
EXCEPTIONS
MESSAGE_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MESSAGE_TEXT contains the message.
Please reward points if this explanation useful.
Regards,
navjot
reward points

I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?

I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?

Maximum Memory 16 GB (Actual) 8 GB (Apple)
Memory Slots 2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

IPad 2 has slow playback. What is the fix? Aside from getting Galaxy Tab...

iPad 2 has slow playback. What is the fix? Aside from getting Galaxy Tab...

Playback quality/responsiveness is a function of network speed. If you have slow playback you need to checkout your network (ISP) and the characteristics and configuration of your networking equipment (WiFi router, etc.)
YouTube performance is excellent on my iPad connected through a high-speed cable modem. What kind of network do you have?

Just Purchased a MacBook Pro. What it the best Adobe product to get to be able to view PDFs?

Just Purchased a MacBook Pro. What it the best Adobe product to get to be able to view PDFs?

Yes, Mountain Lion has a convoluted method to do a "Save as", but try this. Open the applicable PDF, from the "File" menu select "Duplicate". This will create a copy of the PDF file and highlight the name at the top of the page. Here you can type in a new name, and a gain from the "File" menu select "Move To" or "Save" to save the resultant, newly named PDF.

No credit, what is the easiest credit card to get??

Hello everyone, I am 18 about to be 19 and new to credit, i have no credit history whatsoever. I need help figuring out what is the easiest credit card to get with no history. I am currently a student at a university and dont have a job and have a savings account with bank of america. My parents have bad credit so i dont know what to do. I need advice as to what kind of credit card i should be going for in my situation and what should be the easiest to abtain. Any other advice is also welcomed! Thanks!

dzemene wrote:
Hello everyone, I am 18 about to be 19 and new to credit, i have no credit history whatsoever. I need help figuring out what is the easiest credit card to get with no history. I am currently a student at a university and dont have a job and have a savings account with bank of america. My parents have bad credit so i dont know what to do. I need advice as to what kind of credit card i should be going for in my situation and what should be the easiest to abtain. Any other advice is also welcomed! Thanks!I'm sorry but if you have no job or other source of income and no credit you won't be able to obtain a credit card. You need to find employment and then look for a secured credit card to establish some credit.

App store icon gone what's the best/ easiest way to get it back?

App store icon is gone what's the best / easiest way to get it back?

Sophia,
Be sure to look closely for the app in all of your user created folders.

What's the multi colored pinwheel I get when I work on my mac book pro?

What's the multi colored pinwheel I get when I work on my mac book pro?

Zyriab wrote:
it means the system is busy and you have to wait before it will respond to mouse clicks or key presses by you.
Sligh correction here. Sometimes it is the system; but sometimes it is just a specific app, while the system will continue to accept user input, and you may switch to a different app.
The 'official' name is the spinning wait cursor. Go to
<http://www.thexlab.com/faqs/sbbod.html>
for a few more details and troubleshooting techniques (if necessary).

Is the I-Pod Touch 4th generation bluetooth compatible with Nokia E72

Is the I-Pod Touch 4th generation bluetooth compatible with Nokia E72

No. That type of profile is not supported by your iPod Touch. See this article for a list of profiles that are supported.
iOS: Supported Bluetooth profiles
B-rock

HT4972 How do I adjust the clock on the I-pod touch?

How do I adjust the clock on the i-pod touch?

Go to Settings > General > Date & Time
EDIT: If your mean the black Clock app on your screen, you can't set that.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

What is the highest sowfware that the I pod touch 4g gets?

Similar Messages

Maybe you are looking for