What is the HP Digital Imaging Monitor? Does it apply to my OS, Windows 7?

What is the HP Digital Imaging Monitor? Does it apply to my OS, Windows 7? I want to delete the icon from the task tray (tool bar in lower right hand corner of screen) as I never use it.
This question was solved.
View Solution.

Hi,
Digital imaging monitor is a part of the HP software that communicates with your HP printer. This program enables you to read the inklevels, get an out of paper message, scan from the unit to the comuter and so on. Its not neccesary, but it will limit the printers use if you remove it.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • Digital Imaging Monitor fails to open

    Using officejet 1315 all-in-one with newer PC and just upgraded to Windows 7 drivers. Performed complete install with current program from the HP site. I can print and scan from the printer dialog box.
    However the digital imaging monitor does not start. It appears in the task bar but when I click on  launch/show monitor, I get a Window default beep and nothing further happens. I've tried as administrator and ensured permissions are set. Any idea what is preventing the imaging monitor from launching?
    Thanks.

    Hello Ross-WM,
    Welcome to the HP Support Forums! I understand the HP digital imaging monitor does not start, you are still able to print and scan with your PSC 1315.
    Did you ever have another HP printer installed on this computer, do you get any error messages on the computer regarding the HP digital imaging monitor?
     I would like you to start here and run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP Digital Imaging Monitor not seeing Photosmart C6280 on network.

    I have put my Photosmart C6280 All-in-One printer on my wired network, and the HP Digital Imaging Monitor does not see the printer any longer.  Why?

    Hello! Could you please provide more information regarding the issue, such as which operating system you are using? Any additional information will be helpful in resolving your issue. Thanks!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • HP Digital Imaging Monitor Continually Pops Up

    It's getting real annoying. The HP Digital Imaging Monitor continually pops up when the wireless c4385 printer is turned on saying "...is connected....is disconnected...is connected...." I've tried changing the power saving settings in Windows/System for the Root USB hub, didn't help. Tried shutting down the HP services in services, no help. Finally I just turned off the printer and then next time my mouse went over the tray icon it finally turned off and disappeared. What's going on here?

    I have a similiar problem running ... Vista Home premium ..... I find when it appears that it is my startup menu  .... remove from the startup menu.....In my case it wants to install the fax software for my all in on L7500 ..... Removing it from the start will only work if you go and install the fax  software and leave the fax printer in your selections .... if you remove the sucker from your installrd printers because you do not want it or need it ... the message reappears ... in my case install the unwanted fax software then remove from startup quick start menu. Hope this helps. 
    Drypowder

  • HP Digital Imaging Monitor gone

    My HP Digital Imaging Monitor is gone. 
    I tried reinstalling the printer using the CD but it didnt install the HPDigital Imaging Monitor.  How do I reinstall it?

    Problem solved. Clicking on the HP Digital Imaging Monitor icon on the task bar previously launched HP Digital Imaging Monitor, which I expected; but it didn't see the 6500. However, clicking the same icon now launches HP Solution Center without overtly updating or loading anything else. HP Solution Center does see  the 6500, and I can scan and save in PDF as before. I suspect  HP Solution Center was being launched in the past vice HP Digital Imaging Monitor. Before posting the original post, I rebooted my PC several times, checked for Windows and HP updates (there were none), disconnected power from the 6500, and searched specifically for Win 10 version of HP Digital Imaging Monitor all to no avail. 

  • What are the best apps to monitor tests and emails on childs phone

    what are the best apps to monitor tests and emails on childs phone?

    You could simply log into your child's email with the password that the two of you agree upon, and monitor the emails manually.  As for the texts, you could purchase a separate device, and use the child's Apple ID to monitor the iMessages.  For SMS/MMS, no way to monitor it.  You'll have to use the app called 'Random Parental Inspections'.

  • What is the best way of monitoring HD content in FCP?

    I hope to get the Mac Pro listed below, What is the best way of monitoring my HD edit from FCP?
    Can I output to a HDTV, or is a computer monitor better?
    Do I need a capture card to output the signal, or is my below system adequate? i don't need one for capturing as i have will be using a Panasonic AG-HVX200 with P2 card, Can i use this camera to output to a TV/Monitor?
    Message was edited by: calihal

    Well, given your situation, the best option is the Matrox MXO and Apple Cinema Display. I have a full review here as to why it is a good solution.
    http://library.creativecow.net/articles/ross_shane/MXO.php
    This will cost you $995 for the MXO, and $900 for the Apple display. So under $2k. The other options are more expensive. Broadcast quality HD LCDs start at $3500. And other capture cards range from $295 (decklink Intensity) to $3500 (AJA and Decklink). And HDTV will still require a capture card, like the Intensity with HDMI out, but won't be suitable for broadcast quality. It will, however, be perfectly fine for seeing what your HD footage looks like on an HD set that most people will have in their homes. So I take back my initial statement and say that if you have a tower, the Intensity and HDTV is your best option...if you aren't needing full broadcast quality. If you just need to see what it looks like.
    Shane

  • What is the parameter list and why does it keep on coming up?

    What is the parameter list and why does it keep on coming up when I try to finalize the video or share it?

    Hi
    I try to finalize the video or share it?
    How do You do that and to what do You Share it ?
    Yours Bengt W

  • What is the best way to monitor taffic across a Campus?

    I am trying to find the best way/ways to monitor traffic across a campus network. The two solutions I have thought of are using Netflow or ERSPAN. However, neither are supported by the devices in this network. Here is a quick overview of the network...
    Core Switches (3750 Stacks) using Layer 3
    |
    Distribution Switches (3750 & 3650s) using L3 towards Core and L2 towards Access
    |
    Access Switches (Mostly 3500s) using L2
    What are the best options for monitoring traffic on this type of network? All links between switches are Gig, so we have plenty of bandwidth. I would really like to be able to setup snort/ntop or something similar.
    Are there any solutions available that I could use RSPAN and a monitoring computer at the Access Switches and have them report back to a central monitoring machine? I would prefer a centralized solution.
    Thanks,
    Garrett

    Hello Garrett
    Each monitoring software has its own limitations/specifications..
    If you want to monitor traffic/protocols running on ur network, on a constant basis, you will have to use Netflow.. You can use a simple netflow collector, and collect reports, and analyze the application traffic on your LAN/WAN.. Not sure if this will help too much in troubleshooting, since this will be more used for trending your applications. You can probably discover new applications, which arent used much on your network, using this..
    But for real troubleshooting, you will need something like a syslog server.. u can configure logging levels and push important errors/updates from the cisco gear to this box. In case your box goes down, or has issues, system log messages will be dumped to this server and will be a very useful device for troubleshooting... eg, kiwi cat, solarwinds, 3cdaemon, and lots of other freewares...
    I would ideally have both these components on my network, for trending and troubleshooting..
    apart from this, if you have other advance technology products, like wireless, application accelaration etc, there are other network management solutions available..
    Hope this helps.. All the best.. rate replies if found useful
    Raj

  • What is the most suitable image format for processing with imaq?

    Hello.
    What is the most
    suitable image format for processing with imaq?
    I want to capture an image of a usb webcam, store and
    then process it with imaq. I need to know what format to save the
    captured image can then load and process it with imaq vision.
    Thanks

    The only criteria is: don't use JPEG for anything scientific!  The compression involved with saving JPEGs means you always lose information.  I tend to prefer PNG - it's compressed, but non-lossy, and also widely supported.  TIFF is fine as well, but I don't think has any advantages over PNG for this application.  JPEG2000 can give good non-lossy compression I think is slower to read/write than PNG.

  • What is the difference between Message Monitoring and End-to-End monitoring

    Hi experts,what is the difference between Message Monitoring and End-to-End monitoring? and What is the difference between Value Mapping and Fix value?
    Thanks,
    Manoj

    HII
    You use message monitoring in the following cases:
    ● To track the status of messages
    ● To find errors that have occurred and establish what caused them
    Check this help for further info:
    http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
    You use end-to-end monitoring in the following cases:
    ● If you want to monitor message processing steps in a number of SAP components (to be configured).
    ● If you want to monitor the path of individual messages through these SAP components, from start to end.
    Check this help for further info:
    http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
    also refer this doc...gives more insight on various monitoring:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51ae916
    ... End-to-end monitoring in SAP XI provides a graphical overview of the different XI
    components and the message flow between them. It is based on the Process Monitoring Infrastructure (PMI).
    ans also
    http://help.sap.com/saphelp_nw2004s/helpdata/en/7c/14b5765255e345a9e3f044f1e9bbbf/frameset.htm
    You use message monitoring in the following cases:
    1 To track the status of messages
    2 To find errors that have occurred and establish what caused them
    Check this help for further info:
    http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
    You use end-to-end monitoring in the following cases:
    1 If you want to monitor message processing steps in a number of SAP components (to be configured).
    2 If you want to monitor the path of individual messages through these SAP components, from start to end.
    Check this help for further info:
    http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
    End-to-end monitoring includes message monitoring, adapter monitoring, BPE if BPM is involved.. so end-to-end monitoring tells you complete description of your scenario......but message monitoring is concerned only with source message coming to target message successfully generated.

  • What is the source file structure while doing the BDC of mm01

    What is the source file structure while doing the BDC of mm01

    Hi,
    first u create a meterial note the data u enterd in the screens.
    if u have created the material successfully then that data structure will be the source structure of the
    file.
    regards.
    Jagadeesh.

  • When I place a dvd in and click the Br download images Bridge does not come up.

    When I place a dvd in and click the Br download images Bridge does not come up.

    When in DFU mode and connected to the computer iTunes does not say anything but iTunes will see the iPod and you can restore the iPod via iTunes. When in recovery mode and you connect, iTunes will say it found an iPod in recovery mode.

  • What is the quickest way of moving a itunes music library from a windows 7 machine to an apple Macbook pro?

    What is the quickest way of moving an itunes music library from a windows 7 machine to an apple Macbook pro?

    If you wany Everything from your PC itunes on your MBP... Then... See Here...
    Move iTunes Library from PC to MAC
    http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html

  • Ff24, windows 8: displaying bookmarks in a sidebar no longer resizes the web pages to the remaining viewable area. ff24 does do it on my other windows 7 pc's

    ff24, windows 8: displaying bookmarks in a sidebar no longer resizes the web pages to the remaining viewable area. ff24 does do it on my other windows 7 pc's

    Are you sure that you are opening the Bookmarks sidebar and aren't using the Bookmarks Menu button that show the bookmarks in a drop-down list?
    Firefox has two bookmark buttons with a star in the Customize window.<br />
    One star button has a drop-marker that open the Bookmark menu and may appear on the Navigation Toolbar or on the Bookmarks Toolbar if the menu bar is hidden.<br />
    The other star button without the drop-marker opens the bookmarks in the sidebar (View > Sidebar > Bookmarks).
    You can drag the Bookmarks menu button with the drop-marker in the Customize window from the toolbar palette on a toolbar (e.g. Navigation Toolbar or Tab Bar or to the left side of the Bookmarks Menu Items).<br />
    If you do not see the drop-marker then try them both to see which works.
    *https://support.mozilla.org/kb/How+to+customize+the+toolbar
    *https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing
    *You can toggle the Bookmarks sidebar via View > Sidebar > Bookmarks (Ctrl+B)
    *You can toggle the History sidebar via View > Sidebar > History (Ctrl+H)

Maybe you are looking for

  • Caller id not working in roaming

    HI, on my iPhone 5 caller id is not working while I am abroad, in roaming. I am quite supprised with this problem, because all other mobile phones beside iP do this normally. So far I know this is not isolated case with my iP5, but all iP users I kno

  • New iPad2, can no longer connect to Wi-Fi

    Just got and iPad2, could connect up to Wi-Fi and the Internet (set up bookmarks, etc.), but can no longer get on the Internet.  Reset network settings, forgot network, entered data again, turned off Wi-Fi, turned it back on.  Still shows iPad 2 is c

  • I just purchased Compressor for Final Cut Pro X. Won't complete

    Hi there Help please. I was so looking forward to Compressor working simply and effectively. I have an hour video in HD edited in Final Cut Pro x. Pulled down Compressor which I just bought. Every time I try to render it in a smaller compressed file

  • IMac 3.06GHz Intel Core 2 Duo (24-inch) - 2 or 4 slots ?

    Hi, Crucial's memory selector tells me that I can install a maximum of 4GB of memory on my iMac 3.06GHz Intel Core 2 Duo (24-inch). Why does the system info show me that I have 4 slots with 2 being empty (see picture below) ? Regards.

  • My fonts aren't previewing correctly in Font Book

    For some reason I have random fonts in Font Book that aren't previewing correctly.  This has not always been the case but for some reason recently it is.  I have tried clearing my font cache, etc. without any success.  Thoughts?