What is the impact on an Exchange server when moving FSMO role and schema master into another DC?
What is the impact on an Exchange server when moving FSMO role and schema master into another DC? What do we have to do on exchange after performing a such task?
I had 1 DC (Windows server 2008 R2), 1 Exchange 2010 SP3. I install a new DC (Windows server 2008 R2). I then move all the FSMO role including the schema master role into the NEW DC. I check to be sure that the new DC is a GC as well.
I shutdown the old DC and my Exchange server was not working properly and specially Exchange Management Shell. It start working again after I turn up the older DC.
I am wondering why Exchange did not recognize the new DC, even after moving all the roles on it.
I am looking to hearing from you guys.
Thanks a lot
if you only have 1 DC, you might need to cycle the AD Topology service after shutting the one down.
Also, take a look in the windows logs, there should be an event where Exchange goes to discover Domain Controllers, make sure both are listed there. You can probably force that by cycling AD topology (this will take all services down so be careful
when you do it)
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread
Similar Messages
-
What is the order for upgrading exchange server 2013 SP1 servers to CU7?
Hi All
I am planning to upgrade my exchange server 2013 SP1CU4 to CU7 . As per my understanding , we always proceed with the CAS servers and then the Mailbox Servers during up-gradation.
But I am confused now , since I have seen articles stating , that the Mailbox servers has to be upgraded first and then the CAS servers in exchange 2013.
What will be the correct order . My environment consists of 2 Mailbox servers in DAG and 2 CAS servers (Exchange server 2013 SP1)
Thanks in Advance .
Joyso Senior Messaging AdminHi Joyso,
The Microsoft recommendation regarding the order in which the Exchange 2013 server roles should be installed or Upgraded is Mailbox and then CAS.
It makes sense as the CAS Role is a stateless server and all major components are held by the Mailbox Role.
Until a 2013 mailbox server comes online, the CAS server is pretty much useless. Hence, the recommended installation order in 2013 is the reverse of 2010 – Mailbox role first & then CAS
Note: If your DAG have more nodes, you need first upgrade all non-PAM nodes and then upgrade PAM node.
Some References:
The recommendation from the Product Group is to install Exchange 2013 Preview Mailbox Role first, and then the
CAS role.
If you're separating your server roles, we recommend installing the Mailbox server role first.
Upgrade your Exchange 2013 server roles in the required order. First, upgrade Mailbox servers
and then upgrade Client Access servers. -Upgrade DAG Mailbox servers
Exchange 2013 Server Roles Installation Order – Mailbox First:
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you. -
What is the best way to remove elements 10 from one pc and install it on another?
What steps need to be taken to remove Adobe Elements 10 from one pc and install it on another?
Use back up and restore from the Organizer menu. You are permitted two activations so no real need to deactivate the old copy unless you have installed it previously on another machine.
See these instructions for PSE6 and above.
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html -
The "unified messaging" tag under the properties of my exchange server is hidden
hello all,
i have a probleme and hope you will help me to fix it.
when I tried to go the properties of my exchange server , i do not found the "unified messaging" tag in the left menu
what's the probleme? what can i do to resolve it?
ThanksHi,
If I recall correctly that setting was added there in a later build.
Since you are still on Exchange 2013 RTM (15.0.516.32), it would be a good idea to install Exchange 2013 SP1.
Microsoft Exchange Server 2013 Service Pack 1 (SP1)
http://www.microsoft.com/en-us/download/details.aspx?id=41994
Martina Miskovic -
What is the impact of Failed registration of app type 2 (Signals) from plugin unity Error
Hi,
I'm getting this warning message in my VMware (Ms Windows Server 2003) hosting a website using IIS.
My users started to experience application slowness after the issue occured. So i wonder what is the impact of this error message? Does it really impact the server performance?
Event Type: Warning
Event Source: VMware Tools
Event Category: None
Event ID: 1000
Date: 12/15/2013
Time: 12:32:41 PM
User: xxxxxx
Computer: xxxxxx
Description:
[ warning] [vmusr:vmtoolsd] Failed registration of app type 2 (Signals) from plugin unity.
ThanksI had the same thought
wilnesse dericer -
What are the impacts of IB control set to No at Master level
What are the impacts of IB control set to No at Master level, but the item is serialized at master and Org level. These are service items.
What are the impacts of IB control set to No at Master level, but the item is serialized at master and Org level. These are service items.
-
What is the impact on gl account
we have wrongly uploded some asset balances, asset register is not matching with gl ledger. after we found that there are some wrong entries in asset balances. now we want to make some reverse entries in asset gl accounts with OASV, but what is the impact on opening gl account, example; we want to credit the asset gl account and debit the opening balance gl account. now in ledger open.gl account shows nill balance. if we reverse the transactions and by posting some other values what is the impact on this initial opening gl account,
regards,hi,
thnaks for reply, but we cannot reverse as it is initially uploaded directly in asset reconciliation account, moreover, we are already in production and we are yet to run the depriciation from april, finanlly we decided to post the difference amount in reconciliation accounts with OASV, but till now opening upload account shows zero balance, once we post the difference amounts directly in reconciliation accounts this initial upload gl account shows the carryforward balance from march. is there any other alternative, -
What is the impact if you upgrade Oracle 9.2.03 to 9.2.07
Please, can anybody tell me what is the impact is for and SAP R/3 4.6C system if you upgrade the Oracle database 9.2.03 to 9.2.07 ?
Thanks
Peter.Hi
Is there any reason for uprading only to 9.2.07? Why cant you plan for oracle 10.2.0.2 ?
As such there are no issues upgrading the patch set of oracle from 9.2.0.2 to 9.2.0.7.. More than issues there are limitation based on OS, 32-bit/64-bit..
Hope this is helpful..
Regards
Madhu -
What is the impact by changing gl account contra account: acquisition value
Hi experts
what is the impact by changing gl account (contra account: acquisition value in asset accounting(AO90) to the different company codes and different countries. Please review and send across step by step points to us
Warm regards
Sreenivashi,
thnaks for reply, but we cannot reverse as it is initially uploaded directly in asset reconciliation account, moreover, we are already in production and we are yet to run the depriciation from april, finanlly we decided to post the difference amount in reconciliation accounts with OASV, but till now opening upload account shows zero balance, once we post the difference amounts directly in reconciliation accounts this initial upload gl account shows the carryforward balance from march. is there any other alternative, -
Urgent: Some how I deleted the rebate agreements. What is the impact on FI?
Hi
Some how i deleted the rebate agreements. Some are in active, hence system generated reversal postings. Pls let me know what is the impact on FI? What steps need to be done. Appreciate your immediate help.
Thanks,
Gupta.need to issue manual JVs. Contact your fi dept.
If it helps, pls reward. -
What are the Admin Parameters in Weblogic server?
What are the Admin Parameters in Weblogic server?
Hi,
Can you explain what specifically are you looking for? Are you looking for parameters to weblogic.Admin command or something else?
Anil -
What are the impacts of new gl migration on other sap modules.
Hi
In need to move to IFRS reporting, my client is planing to migrate from classic gl to new gl (not yet decided which scenario, but most probably we will go with scenario 5).
We are in stage where we are assessing new gl functionality, impact of new gl migration on other SAP module and what precautions we should carry while drafting project activities for migration plan.
I am specially interested to know how are other modules impacted by New GL? Ex. SD, MM, HR, Treasury, CRM ?
Thanks,
SurendraHi Karthik,
I have already gone thru OSS notes 1014364, 1039752, 1070629 and many more...
My specific question is, what are the impacts of New GL migration on other SAP module (HR, SD, MM, CRM, and Treasury). I am well aware of impact/changes within FICO.
Thanks,
Surendra
Can anyone tell with their experience if any of the above listed modules have any specific impact/change when we migrate to New GL from Classic GL? -
What are the advantage of using Oracle Database when compare to SQL SERVER
Hi all
Please tell anyone about
what are the advantage of using Oracle Database when compare to SQL SERVER
Thanks in advance
Balamurugan Suser12842738 wrote:
Hi,
There are various differences between the two.
1. SQL Server is only Windows, but Oracle runs on almost all Platforms.
2. You can have multiple databases in SQL Server, but Oracle provides you only one database per instance.Given that the very term 'database' has s different meaning in the two products, this "difference" is absolutely meaningless.
3. SQL Server provides T-SQL for writing programs, whereas Oracle provides PL/SQLWhich means what? Both products have a procedural programming language. They named them differently, and the languages are not interchangeable. Means nothing in comparing the features/strengths/weaknesses/suitability to purpose.
4. Backup types in both are the same. (Except Oracle provides an additional backup called Logical Backup.)You make that sound like "Logical Backup" is something more than it is. It is nothing more than an export of the data and metadata. Many experts don't even consider it a backup. I'm sure SQL Server provides the same functionality though they probably call it by some other name.
5. Both provide High Availability.Well, I guess they both have a suite of features they refer to as "High Availability". But what does that really mean? The devil is in the details. Remember, the two products don't even agree on what constitutes a "database".
6. Both come in various distributions.???
>
If you are going for an Implementation, you can try SQL Server Express Edition and Oracle XE which are free to use.
Then you can choose whichever is comfortable for your needs.
Thanks. -
What is the best platform for Oracle Server?
What is the best platform for Oracle Server?
What is your criterion?
Thanks,
Somsak B.I believe that Oracle is developed and coded on a Solaris
platform and then ported to other operating systems. If that is
the case, you can assume that Solaris is the best platform or at
least the safest in terms of performance and risk.
If anyone knows anything to the contrary, pls correct me. -
What are the advantages to adding a server to my home/home office system?
What are the advantages to adding a server to my home/home office system?
It's hard to give you specific answers unless we know your current setup. Any server, or specifically OS X server, may not be appropriate for your workflow.
A server is a centralized computer which can act as a file repository for other computers and devices to access. It can also centrally manage authentication for other resources (ie, have a single sign in for multiple services), can act as a web server, a calendar server, and other features. Of course, many of those things are available from other providers, but having your own server means that you have more control (and responsibility) over them.
This is a good place to start:
https://www.apple.com/osx/server/
Matt
Maybe you are looking for
-
Help! And Dropbox won't start because it can't find a secure connection, even after I manually re-enter mi wifi password and connect.
-
Using Media Manager to 'Make Offline' it re-names media files to 'Private'
For some reason Media Manager is changing the name of media files when processing them making it impossible to reconnect them. My director always has a complete copy of our film's media files on his 'home set-up' (FCP 5.0 on a Powerbook with 2 x 500g
-
Insurance benefit enrollment service not displaying Alternative Coverage
I am using service sap.com/ess~ben for benefits enrollment. I have set up an employee life insurance plan that has an enrollment limit of 250,000 before evidence of insurance is required. In the evidence of insurance configuration I have action 3 C
-
AMD Radeon HD 6990 vs Mercury Playback Engine
I just installed an AMD Radeon HD 6990. I am using Adobe Premiere Pro CS5.5 My Mercury Playback Engine "GPU" choice does not show up in Premiere. I tried the hack. Nothing. I see my card is not listed in the http://www.adobe.com/products/premiere/tec
-
Is a Dynamic DNS Service included in my FiOS Bundle?
I have the FiOS TV, Phone & Internet Bundle (internet upgraded for $5 extra for faster speeds) and switched from Cable. I know that Cable provided all of their Boost internet premium speed customers with a bundle of goodies, including a Dynamic DNS s