What is the information we can get the through details tab in RSMO

Hi to all,
Currently I am working for P.support project, All of you well known about the importance of Details tab in rsmo screen. Here we have 4 options from where we can get more informaiton...
1) Reqest
2) Extraction
3) processing
4) Datapacket information..
Any one of you pls explain briefly about these options. Any documents regarding these will help me a lot...
My concern mainly about... How these ooptions are realated to each other...
Thanks in Advance....
Rgds,
Venkat....

R for Requests says whether the request is working in general ok or not
E for Extraction says whether data received and scheduled. How many records are sent for extraction and how many are received for extraction.
T for Transfer IDocs indicates how many data packages are there for extraction and how many records arrived in each data packages for extraction.
P for processing indicates transfer rules,update rules and update and processing have any errors or not.
P for Process Chain will indicate whether it worked ok or not if there is a process chain and load is successful or not.
Hope this helps please assign points if it does.
Thanks
A. Ramasubban

Similar Messages

Any idea how the java application can get the physical memory?

Hello, everyone
Any idea how the java application can get the physical memory?
thanks in advance

I believe what yo intend to do is forbidden, but here
my answer.
when you start your application you can give your VM
the entire memory of your pc. like this this memory
is completly under your control.* headdesk *

Already i download driver for install the windows, i can get the drivers but i can't install windows, how i can install windows without downloads driver again

already i download driver for install the windows, i can get the drivers but i can't install windows, how i can install windows without download driver again

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Name of the table where can get the two fields Valid-From and Valid-to for

Hi gurus
I want name of the table where I can get the two fields Valid-From and Valid-To and their relation ship with the header table in BOM
Regards
Kaisar

You can only get the Valid from date from the table STKO.
To get the valid to date, you have to take one day less than the valid-from date of the next record for the same BOM.
Alternatively use the Function module:
CSAP_MAT_BOM_READ
It will give both valid from and valid to dates in the tables parameter: T_STKO
Regards,
Ravi
Edited by: Ravi Kanth Talagana on Jul 2, 2008 4:37 PM

When submitting form, form elements like text box are not available in my action page. This occurs only for several times. if i resubmit the form, i can get the form elements in my action page. May be form get submitted twice in firefox 3.6.13

I have a simple web page with two form elements say, two text box and submit button. when submitting my form, i didn't get the form data in my action page. This occurs only in Firefox 3.6.13 several times. Not always.
May be form get submitted twice?
Note: Remember, i am not facing this issue. However my friend is facing this issue.

I have a simple web page with two form elements say, two text box and submit button. when submitting my form, i didn't get the form data in my action page. This occurs only in Firefox 3.6.13 several times. Not always.
May be form get submitted twice?
Note: Remember, i am not facing this issue. However my friend is facing this issue.

Does @Variable() can get the locale infomaiton of the enduser

hi, all
like the @Variable('BOUSER') can get the current user of the webi or universe, does @Variable() can get the locale infomaiton of the enduser?
thanks.

@Variable provides a default list of options.
I posted the list in this topic on BOB - scroll down to it:
http://www.forumtopics.com/busobj/viewtopic.php?t=142539
The extended discussion also explains that while you can create other parameters, you will be responsible for maintaining them through something like the Windows API.
Regards,
Mark

HT204053 I am running Windows 7 and have tried to install iCloud. No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account." How can I resolved this?

I am running Windows 7 and have tried to install iCloud. No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account." How can I resolved this?

I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish

HT2513 How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled".

How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"

Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz

My hard drive died last week, and I needed to install a new one. Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg. Now I can get the .pdf but can't determine what to do to convert to .jpg. Does anyone know ?

My hard drive died last week, and I needed to install a new one. Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg. Now I can get the .pdf but can't determine what to do to convert to .jpg. Does anyone know ?

Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
The instructions on that are here
If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

In Photoshop Elements 11 attempting to blend two photos ( layering one on another) when I click on a brush, I get a smart brush which doesn't do what the instruction say it should do. Instead I can get the eraser to do what I need to do. Why the confusion

In Photoshop Elements 11 attempting to blend two photos (layering one on another) I click on brush and get a smart brush which doesn't do what the instructions say it will do. I can get the eraser to do what I want. Why the confusion???

I click on brush and get a smart brush which doesn't do what the instructions say it will do.
The Brush tool (Keyboard B) has several different brushes in the same slot. Right click on the brush icon and you will see them, or press B sequentially.
The Smart Brush tool (Keyboard F) has two items in the slot.
Since you did not provide reference to "the instructions", it is difficult to remedy the "confusion." that exists.
I suspect that the recipe calls for a mask, and painting with a black brush to mask out certain areas.
It would help if you post the instructions and what your goal is with more specificity.

HT1751 All of my songs have exclamation points (!) next to them but when I go to my iTunes media folder to find the files, there is nothing in the folders. Any idea what happened and how I can get my music back?

All of my songs have exclamation points next to them but when I go to my iTunes media folder to find the files, there is nothing in the folders. Any idea what happened and how I can get my music back?

I wish I could help. There are numerous threads about missing music but last I looked, no solution. You might want to read through them anyway.

What is the easiest way to get the data from the mailmerge to form Pages files that can be saved separately?

Using Iwork 09 I have spent several hours setting up a mail merge from a spread sheet in Numbers to create receipts for my customers from a Pages template.
After the merge I am left with one long Pages document that will not save as separate files; one per customer, it will only save the whole document of several receipts.
What is the easiest way to get the data from the mailmerge to form Pages files that can be saved separately?
Many thanks in advance.
Richard

Mr. Clark,
You will probably be more pleased with the iWork apps when you begin to learn your way around. Until you learn such basic things as how to print only one page of a document, you will probably continue to be disappointed.
Does your Print dialog look like this:
Or like this:
If it looks like the first one, then you will want to click this expander control:
Regards,
Jerry

How we can get the current running user information in BusinessOne

Hi experts,
How we can get the current running user information in BusinessOne Application,
Based on the user details i want to assign some functionality,
Regards,
Saidarao yakkala

Hi,
As per me you can't get detail by server side.
If you want to know who are connected then you can use sp_who2 procedure in SQL query.
That will display who are login.
For more detail you have to check LOG file on client side in SAP B1 > Log folder.
Thanks
Kevin

What are the reports we can get from OPM Quality

Dear All,
What are the reports we can get it from OPM Quality module.
I am unable to get any reports abouts Tests, Samples specifications.
Can someone please suggest me.
Regards,
Jon

Pl post details of EBS version.
If 12.1.3, see Chapter 7 of the OPM Quality User Guide - http://download.oracle.com/docs/cd/B53825_08/current/acrobat/121gmdqmug.pdf
The same guide for other versions can be found at http://www.oracle.com/technetwork/documentation/applications-167706.html
HTH
Srini

When i open my itunes store, it says secure link to itunes failed and it doesnt load up, what seems to be the problem here? appreciate all the help i can get, thanks! :)

When i open my itunes store, it says secure link to itunes failed and it doesnt load up, what seems to be the problem here? appreciate all the help i can get, thanks!

Yes, provided all the media is inside the iTunes Media folder, which is in turn inside the main iTunes folder (which is the standard arrangement) you should be able to move the iTunes folder from <User's Music> to any other path and shift-start-Tunes (option-start-iTunes on a Mac) to reconnect to it.
If the media folder has split out to another drive in the past, or media is stored outside of the iTunes Media folder, then things get a bit more complicated. I can go into details should it be necessary.
tt2

What is the information we can get the through details tab in RSMO

Similar Messages

Maybe you are looking for