What is the interaction between calling VIs and subVIs using VI Server?

I'm studying for the CLAD and one of the lines in NI's preparation document here is this:
What is the interaction between calling VIs and subVIs using VI Server?
I know how to use the "Call By Reference" function to call a VI, but not necessarily a subVI. I thought a subVI is always loaded with the calling VI and has nothing to do with VI Server. What am I missing?
Solved!
Go to Solution.

Hi Bmihura,
I think this article will clear up how the VI Server works with subVIs called dynamically or statically.
Calling a VI by Reference
Best Regards,

Similar Messages

What is the diffreence between call transaction and session method

hi gurus
can any one suggest me
what is the difference between call transaction and session methods
in which cases we have to use teh call transaction and
in which cases we have to use session method.
thank you
regards
kals.

CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Regards,
Sunil Kumar Mutyala

How does QoS work with WAAS WCCP? What's the interaction between QoS Traffic Classification and WAE Traffic Application Policy?

How does QoS work with WAAS WCCP? What's the interaction between Router QoS Traffic Classification and WAE Traffic Application Policy?

By default, WAAS preserves the DSCP marking on intercepted packets. There is a configuration option to set/override the DSCP value at the global (device), application, and classifier levels. Currently WAAS provides marking only. There is no action taken by WAAS based on the DSCP value.
Regards,
Zach

What is the difference between VI Template and vi that is reenterant?

What is the difference between VI Template and vi that is reenterant?
From what little info I can find about them, they seem to basically do the same thing....
What are the difference?
What are the pros and cons of each?
Thanks alot for the help.....

Tarek316 wrote:
I inherited an app that uses .vit for the purpose of having multipe separate instances.
Thanks,
OK, here's what happens when you call a VI Template using Call by Reference or using Invoke and Property Nodes.
Since the VI you are calling is a template, LabVIEW creates a new instance of that VI by creating a copy of it and giving a new name. Notice in the title bar of the instantiated VI the VI name is the same as the template VI plus a number. This is the same thing you see when you open a template from the "New..." menu. So if you call the template VI 3 times, you'd end up with 5 newly instantiated VIs named, "VI Name 1.vi", "VI Name 2.vi" and "VI Name 3.vi". This is how you end up with multiple instances.
Reentrancy only works on subVIs when they are used as a normal subVI in a top level application. Using Call by Reference or Invoke and Property Nodes to open and run a reentrant VI results in the VI only being opened once because LabVIEW will not automatically give it a new name. The new name is only generated when calling templates. Since LabVIEW can only a have a single instance of VI name in memory at a time, you'll not end up with multiple instances.
Not sure if I can help with the know issue on OSX. If it's specific to using the Call by Reference function, you could try calling the templates using Invoke and Property nodes.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

What is the diffrence between sap events and application events

Hi all,
what is the diffrence between sap events and application events.Can any one tell me with examples.
regards,

Hi,
Look at this,
<b>System Events (Default)</b>
The event is passed to the application server, but does not trigger the PAI. If you have registered an event handler method in your ABAP program for the event (using the SET HANDLER statement), this method is executed on the application server.
Within the event handler method, you can use the static method SET_NEW_OK_CODE of the global class CL_GUI_CFW to set a function code and trigger the PAI event yourself. After the PAI has been processed, the PBO event of the next screen is triggered.
The advantage of using this technique is that the event handler method is executed automatically and there are no conflicts with the automatic input checks associated with the screen. The disadvantage is that the contents of the screen fields are not transported to the program, which means that obsolete values could appear on the next screen. You can work around this by using the SET_NEW_OK_CODE method to trigger field transport and the PAI event after the event handler has finished.
<b>Application Events</b>
The event is passed to the application server, and triggers the PAI. The function code that you pass contains an internal identifier. You do not have to evaluate this in your ABAP program. Instead, if you want to handle the event, you must include a method call in a PAI dialog module for the static method DISPATCH of the global class CL_GUI_CFW. If you have defined an event handler method in your ABAP program for the event (using the SET HANDLER statement), the DISPATCH method calls it. After the event handler has been processed, control returns to the PAI event after the DISPATCH statement and PAI processing continues.
The advantage of this is that you can specify yourself the point at which the event is handled, and the contents of the screen fields are transported to the application server beforehand. The disadvantage is that this kind of event handling can lead to conflicts with the automatic input checks on the screen, causing events to be lost.
Hope u understood.
Thanks&Regards,
Ruthra.R

What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

Any call made from the API will automatically be set to the “Session Timeout” period, no matter
what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
Short Session Timeout and Session Timeout in Excel Services
Short Session Timeout and Session Timeout in Excel Services - Part 2
Sessions and session time-outs in Excel Services
above links are from old version but still applies to all.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

What is the difference between document class and normal class

Hi,
Please let me know what is the difference between document class and normal class.
And I have no idea which class should call as document class or call as an object.
Thanks
-Actionscript Developer

the document class is invoked immediately when your swf opens. the document class must subclass the sprite or movieclip class.
all other classes are invoked explicitly with code and need not subclass any other class.

What's the difference between FM 'UPLOAD' and FM 'ALSM_EXCEL_TO_INTERNAL_T'

What's the difference between FM 'UPLOAD' and FM 'ALSM_EXCEL_TO_INTERNAL_TABLE'
thanks!

hi,
Generally FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' is used for reading Excel sheet i.e, either row wise or column wise . where as WS_UPLOAD will read the entire data in to an internal table in a file format.
for illustration as how it is used check this out
PARAMETER p_infile like rlgrap-filename.
*START OF SELECTION
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       exporting
            filename                = p_infile
            i_begin_col             = '1'
            i_begin_row             = '2' "Do not require headings
            i_end_col               = '14'
            i_end_row               = '31'
       tables
            intern                  = itab
       exceptions
            inconsistent_parameters = 1
            upload_ole              = 2
            others                  = 3.
if sy-subrc <> 0.
    message e010(zz) with text-001. "Problem uploading Excel Spreadsheet
endif.
http://www.sapdevelopment.co.uk/file/file_upexcelalt2.htm
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = gd_file
      has_field_separator     = 'X' "file is TAB delimited
    TABLES
      data_tab                = it_record
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
    IF sy-subrc NE 0.
      write: 'Error ', sy-subrc, 'returned from GUI_UPLOAD FM'.
      skip.
    endif.
http://www.sapdevelopment.co.uk/file/file_uptabpc.htm
Regards,
Santosh

What's the difference between "My Contacts" and "All Contacts"?

What's the difference between "My Contacts" and "All Contacts"?
I have no other account other then my iCloud account (from what I can tell), but "My Contacts" has a significantly smaller number of contacts then "All Contacts".
What's the difference?

Thanks for posting the screenshots, that's helpful. I didn't realize that you were looking at your groups.
"All Contacts" include (as the name implies) all of your contacts. Below that are any contact groups that you may have defined. These would normally be such things as "Work", "Personal", "Doctors", etc.; any groups that you find useful to define. These contain subsets of the "All Contacts" group.
At some point, perhaps inadvertently, you must have created a group called "My Contacts", or imported it to iCloud from your computer. At the time this may have contained all of your contacts and would have had the same number of contacts as the "All Contacts" group. Then over time you probably added 433 additional contacts that were never part of the original "My Contacts" group, resulting in an "All Contacts" group that contained 1465 contacts.
If you don't have any use for the "My Contacts" group, you can delete it by clicking on it on the left sidebar, click the gear icon on the lower left and choose Delete. If you're concerned about doing this, you can make a backup of this group first by selecting it on the left sidebar, clicking on a single contact within the group, pressing Control-A to select them all (they should all be highlighted), then clicking the gear icon and choosing Export vCard. This will create a .vcf file that can later be imported back to iCloud if you ever need to (by clicking the gear icon again and choosing Import vCard).

[svn:osmf:] 10248: Fix a few bugs related to the interaction between IPlayable, IPausable, and ITemporal within a SerialElement, specifically around ensuring that the transition from child to child happens in the various permutations of these traits .

Revision: 10248
Author:   [email protected]
Date:     2009-09-14 16:45:00 -0700 (Mon, 14 Sep 2009)
Log Message:
Fix a few bugs related to the interaction between IPlayable, IPausable, and ITemporal within a SerialElement, specifically around ensuring that the transition from child to child happens in the various permutations of these traits. Introduce a helper class for managing this logic, as it can happen in both CompositePlayableTrait and CompositeTemporalTrait. This lays the groundwork for a MediaElement which only implements IPlayable (e.g. to ping a tracking server) working within a serial composition. Beef up unit tests so that these cases don't get broken in the future.
Modified Paths:
    osmf/trunk/framework/MediaFramework/.flexLibProperties
    osmf/trunk/framework/MediaFramework/org/openvideoplayer/composition/CompositePlayableTrai t.as
    osmf/trunk/framework/MediaFramework/org/openvideoplayer/composition/CompositeTemporalTrai t.as
    osmf/trunk/framework/MediaFrameworkFlexTest/org/openvideoplayer/composition/TestSerialEle ment.as
Added Paths:
    osmf/trunk/framework/MediaFramework/org/openvideoplayer/composition/SerialElementTransiti onManager.as

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

What's the difference between reguler KDE and KDEmod?

Hello all,
In two weeks I get my new laptop, which will be capable of running Arch and KDE ( as my current computer isn't, somehow it only runs Fedora w/ Gnome)
Since I really like Arch and already got it working on Virtualbox, I want to install it on my new laptop. I'd like to get it working with KDE, but I noticed Arch also has KDEmod. I already searched the forums but couldn't really find an answer to my question: What is the difference between regular KDE and KDEmod and which one is better for me to use?
Thanks in advance!

Allan, i forgive you for your poor paragraph construction and sorry for me being a bit peeved
However, i know you have read more from the IRC log than just that one sentence by me...
Allan wrote:
From the IRC log, I do not think that conclusion is too far off, especially if you are considering Arch-Stable as your base... So saying "plain wrong" seems... well... plain wrong. Especially given the irc log:
<funkyou> in one sentence: to do what we really want to do, we need a stable platform.
So why not showing the whole picture and clear this up:
<funkyou> ok, to start: i think at least some of you have noticed that arch linux is a fine platform for what we want to deliver, but there are some little "annoyances"
<funkyou> mainly:
<funkyou> -.so bumps every few weeks
<funkyou> -the general "freshness"
<funkyou> -a lot of manual interaction needed (sometimes)
<funkyou> everyone can see these problems when looking at the forums, _most_ of them are related to updates
<funkyou> in one sentence: to do what we really want to do, we need a stable platform.
Makes more sense now? Its not that Arch is too unstable, its just that we cant keep up will all the changes... And this is not Archs "fault" nor anyone elses fault, its just going too fast for us. Most annoying or severe bugs in our tools are there due to upstream updates. And the reasons are not really the .so bumps (which are mostly solved by a simple rebuild) but also constantly changing apis and stuff. This is not a big problem in KDE (they keep their apis clean), but a big one when it comes to other stuff like parted, to give an example. And this is our main problem, we need to constantly adapt our code to upstream changes.
This even resulted in a repo with modified or "frozen" Arch packages just to keep our liveCD going, and now we are looking for solutions for this problem, and "stable" snapshots seem to be one way... Oh, and if we would do this (there is nothing announced yet), we would do our own snapshot every X months because ArchStable seems to be a dead project. We also considered cooperating with the ArchServer guys, but their stuff is really made for servers, so even while their project is really nice its not really an option for us.
Well, we'll see what we will do during the next months, now we are still testing and evaluating some solutions... Oh, and people, please stop any "we dont need another ubuntu" complaints...

What is the difference between smart forms and scripts.?

what is the difference between smart forms and scripts.?

Differences between Smartforms and SAPscript
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Routines can be written in smartforms tool.
d) Smartforms generates a function module when activated.
e) Smartforms can create web enable forms like XML
f) smartforms itself contine subroutine pools need not to main separetly like in case of scripts
Request you to refer the following links
www.sap-img.com/smartforms/smartform-sapscripts.htm
www.erpgenie.com/abap/smartforms_sapscript.htm
Sapscript vs Smartforms
Difference with SMARTFORMS vs. SapScript(SE71)
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated
Scripts are client dependent whereas smartforms aren't.
Upto 99 main windows are possible in scripts and only one in smarforms.
To create multiple main windows in scripts, you just have to give the window type as MAIN whnever you create a window.
Scripts still exists but smartforms are in use from 4.6c version, now the lastest version of these two is adobe forms
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaptation of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
Reward Points if useful.

(261680070) Q WWO-13 What are the difference between WLS6.1 and WLS7.0 web services?

Q<WWO-13> What are the difference between WLS6.1 and WLS7.0 web services?
A<WWO-13> The differences are huge, so different in fact that 6.1 web services cannot
be deployed in 7.0. WLS7.0 and Workshop have much greater functionality than the
limited stateless session (RPC-style) and JMS destination (MSG-style) approach of
6.1. Workshop web services can interact with any type of EJB, any JMS destination
as well as other web services and directly accessing databases. The framework for
building the web service is better and more adaptable and Workshop provides a fully
integrated develop, deploy, test and debug environment. Additionally, WLS7.0 have
the capacity to be much better at performance since due to XML parser enhancements
and the addition of XML maps.

If you want to take existing WLS6.1 web services and convert them to WLS7.0 you can
do so quite easily. The WLS7.0 Ant still supports wsgen so you do not need to even
change your build.xml file. The generated web service however will be implemented
is a manner compliant with the WLS7.0 environment. More details are at:
http://e-docs.bea.com/wls/docs70/webServices/anttasks.html#1070576
"Adam FitzGerald" <[email protected]> wrote:
>
Q<WWO-13> What are the difference between WLS6.1 and WLS7.0 web services?
A<WWO-13> The differences are huge, so different in fact that 6.1 web services
cannot
be deployed in 7.0. WLS7.0 and Workshop have much greater functionality
than the
limited stateless session (RPC-style) and JMS destination (MSG-style) approach
of
6.1. Workshop web services can interact with any type of EJB, any JMS destination
as well as other web services and directly accessing databases. The framework
for
building the web service is better and more adaptable and Workshop provides
a fully
integrated develop, deploy, test and debug environment. Additionally, WLS7.0
have
the capacity to be much better at performance since due to XML parser enhancements
and the addition of XML maps.

What is the difference between buffered acquisition and non buffered acquisition?

What is the difference between buffered acquisition and non buffered acquisition? How will I decide whether I want buffered acquisition or non buffered acquisition?

I will also add that with non buffered acquisition you have to use software timing. Windows is not a real time OS, so the the timing is not accurate. But if you use buffered acquisition the timing will be controlled with an accurate internal clock on the Daq unit. I think non buffered acquisition should be avoided in most cases.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

What is the interaction between calling VIs and subVIs using VI Server?

Similar Messages

Maybe you are looking for