What is the issue I am having with my macbook

When I am at home my macbook wont load youtube videos on my home wifi, I turned on my hotspot on my phone to connect using my phones data and youtube worked just fine, it works just fine on other wifi networks but it does not play videos on my home internet, the other computers in our house on the same network and they play youtube videos just fine. what is the best thing to do to resolve this issue

I have 10 Mbps internet, they played fine before until last weekend

Similar Messages

  • I have never had the issues I am having with the latest update to Yosemite. Is there a fix/update for this?

    I have never had the issues I am having with the latest update to Yosemite. Is there a fix/update for this?

    For what? It works fine for me on three different computers. If you want a fix for something then be more specific.
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • HT4007 Hi there, I was sent here to try to troubleshoot the issues I am having with my Iphone 5. I purchased this phone in January 2013,

    Hi there, I was sent here to try to troubleshoot the issues I am having with my Iphone 5. I purchased this phone in January 2013,
    I have had issues with battery life almost from the start. I can have the battery charged fully and send a two word text and have the battery life decrease by at least 5%. When I called apple support, I was on the phone for 12 minutes and the battery went down 10% in that time.
    The screen often freezes and won't let me scroll through the apps.
    The phone often times won't turn on either.
    I was directed to apple support online to try to remedy these issues and am having quite a bit of difficulty with the site, it's very frustrating.
    I was told that it was a hardware issue by the Bell store I purchased the phone from, but the apple support telephone operator said I had to go through the online trouble shooting steps first.
    Can someone walk me through this as I seem to keep getting booted out, cannot find the troubleshooting steps I was told about.
    Thanks, Bethanie.

    start by a reset
    then a Restore with back up and if required as new
    http://support.apple.com/kb/HT1430
    http://support.apple.com/kb/HT4137

  • Three very annoying issues I'm having with my MacBook Pro... PLEASE HELP!

    Alright I received my refurbished *2.4GHz MacBook Pro with 256 Vram* in the mail a few days ago. Since then I've had 3 reoccurring problems that are extremely annoying..
    1. *_The MBP will not hold a WiFi connection_*. +The AirPort is always in scanning mode. It'll stay online for a few moments, then it'll disconnect and it just keeps repeating this cycle. I know it's not my router because I've tried it with other ones and it's the same issue each time. I know these don't have as good of range as the MacBook's, but I don't think thats the issue here. This is the most serious of all the problems, so any help would be appreciated!+
    2. *_The MBP will not always load up after being in sleep mode_*. +I've read this is a common issue, but have yet to find a solution. This happens when I wake the computer up from sleep mode. The screen just stays black, but you can hear the SuperDrive boot up. It does load after a minute or two, but it is still extremely annoying. I've read it might have to do with the keyboard firmware update?+
    3. *_At random times the computer will drastically slow down and become very "jumpy"_*. +This is an odd issue I haven't seen anywhere else. Its happened twice now and pretty much the computer slows down and the cursor becomes very jumpy and not smooth. I have checked iStat and it says I have plenty of resources left, so there's no reason it should be slowing down. I did install 4 gigs of RAM in it, but the computer reads it fine and I installed it correctly. I doubt that's the issue, but figured I'd throw it out there.+
    Sorry for the long thread, but these are really messing things up. This is my first Mac and I'm hoping these can all be easily solved. Should make a Genius Bar appointment? Thanks again!

    I probably can't help much since I've never had these issues myself, but I will try.
    How did you do your installation? For a new machine, many users recommend erasing and reformatting and doing an erase and install, which will allow you to deselect all the languages and printer drivers that you will never use. I don't know if this is absolutely necessary, but I have always done it.
    Have you repaired permissions? You do this with Disk Utility, which is in the Utilities folder in your Applications folder. You want to repair permissions both before and after installing any software. This is just good practice which will prevent many software glitches.
    Concerning Airport, there was a recent software update which was supposed to fix some of the problems people were having. Download it if you haven't already. If that doesn't resolve the problem, it's probably worth taking it to the genius bar. My MBP does a remarkable job of holding a connection. It will even pick up a signal from the router across the street and hold it. There may be a configuration problem or something like that with yours.
    My display wakes up right after the superdrive makes its noise. In just a few seconds. I don't know why yours should be taking so long.
    As for the cursor freezing, I had that problem at first when I was running the Tiger 10.4.10 it came with, along with a number of sleep issues. It seemed like it would try to go to sleep and then freeze, as if it was not recognizing an activity as an activity. But the upgrade to Leopard took care of all of those problems.
    I assume that your MBP shipped with Leopard, or at least with an upgrade disc to Leopard. If you happen to still be on Tiger, you might try going to Leopard and doing all the updates.
    Otherwise, the genius bar might be your best bet. Probably faster than the forums anyway.
    Good luck!

  • What is the best projector to use with a macbook air

    Need a trouble free projector to use with my macbook air for showing photos and business documents , excel eyc.

    If you don't mind connecting the projector directly to the Mac with an HDMI cable, any projector with an HDMI input will work. There are a very large variety to choose from. Projector People is a competent vendor that I have used and can recommend. They are knowledgeable about Macs. Describe your needs and they will make recommendations. Their prices are as good as you are likely to find anywhere else.
    You will also need a Thunderbolt to HDMI adapter. Purchase one from Monoprice. They are less than $10.

  • What are the default apps that come with a macbook pro Mid 2014

    Hi all,
    so what happened is that I forgot my password (the computer's) and I did erase all and came back on the factory reset. All is fine so far, but I am missing a lot of my apps - I sure did chat with apple and they made something so that I can get my Pages and etc back, but seems like I am missing a lot. I will show a screen shot to see the current situation. I use MacPro Mid 2014, from apple online store.

    http://www.apple.com/macbook-pro/built-in-apps-retina/
    If you suspect something is missing, describe what you think it may be. The programs in your screenshot appear to be the correct ones.
    Be careful with torrent clients...

  • What in the world is going on with my MacBook?

    My MacBook Pro has been typing in all caps recently and instead of opening new tabs in chrome it is opening all new pages. Also everything like the swipe controls on the touchpad and lagging a ton. What happened? This just started within the last 2 days.

    Reset your SMC and PRAM.  If that doesn't fix it, then run the Apple hardware test. Report back on any errors.

  • Just got an Ipad and am working on setting it up.  the one issue I am having with it is my screen will not rotate no matter what I do to the settings, I can't figure out if the settings are wrong or if there really is something wrong with my Ipad.

    just got an Ipad and am working on setting it up.  the one issue I am having with it is my screen will not rotate no matter what I do to the settings, I can't figure out if I have a setting wrong or if there really is something wrong with my Ipad.  any help would be greatly appreciated.

    Double click the home button (square)  and all the things you did are there.keep sliding the bar that will come up on the bottom to the left till it cant go anymore there should be a icon looking like this.press that and it should work
    Good luck hope it works.

  • HT4623 My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue

    My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue?

    Hi there Double2D,
    You may find the troubleshooting steps in the article below helpful.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    -Griff W. 

  • What is the best way to deal with memory leak issue in sql server 2008 R2

    What is the best way to deal with memory leak issue in sql server 2008 R2.

    What is the best way to deal with memory leak issue in sql server 2008 R2.
    I have heard of memory leak in OS that too because of some external application or rouge drivers SQL server 2008 R2 if patched to latest SP and CU ( may be if required) does not leaks memory.
    Are you in opinion that since SQL is taking lot of memory and then not releasing it is a memory leak.If so this is not a memory leak but default behavior .You need to set proper value for max server memory in sp_configure to limit buffer pool usage.However
    sql can take more memory from outside buffer pool if linked server ,CLR,extended stored procs XML are heavily utilized
    Any specific issue you are facing
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • HT201335 when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?

    when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?  My son's Ipad(same as kind as mine) works ok with the apple tv but mine does not.  Any suggestions?

    Hello Nina Izurin,
    While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • What is the issue with dename here ??

    What is the issue with dename here ??
    Hi ,
    iam calling another report using srw.run_report and passing all parameters, Iam getting error for desname parameter, I need to assign the server path in the desname so that the report output is created in that directory. Please let me know what is the problem with desname in the following statement,
    srw.run_report
    ('report=c:\project_files\us_files\sales\sc_report.RDF
    paramform=no
    background=yes
    destype=file
    desformat=pdf
    p_srep_id='||to_char(c2_rec.salesrep_id)||'
    p_contract_number='||to_char(c2_rec.contract_number)||'
    desname='/ora1/app/applcsf/out/'||to_char(:p_srep_id)||'-'||to_char(:p_contract_number)||'.pdf');
    Thanks,
    Previn

    Hello,
    In your example, the REPORT parameter uses a "Windows Syntax":
    c:\project_files\us_files\sales\sc_report.RDF
    and the DESNAME uses a "UNIX Syntax" :
    '/ora1/app/applcsf/out...'
    You must use a filename syntax supported by the OS where Reports is running ...
    If Reports is running on Windows, you cannot use a filename like '/ora1/app/applcsf/out..'
    regards

  • What is the issue with iMessage with iOS7?

    What is the issue with iMessage with iOS7?  I continue to have messages that are not sent.  Is there a config I need to modify since I went to iOS7 or is this "a feature" now?

    NO ! its not a feature. its a bug and Apple will fix it soon. Meanwhile if you continue to have problem the best way to overcome this problem is to turn off iMessages and use Text messages instead btw if you text alot, your carrier might charge you for it if you dont have unlimited text messages. So be careful !

  • I rent a movie on iTune, dowloading on my ipad2, the movie stop reading from chapter 10, and an alert inform me when i try to Start the movie that i cannot read it. What is the issue for solve this problem?

    I rent a movie on iTunes stores, downloading it to my iPad2, but during the movie, the reading stop from capter 10 to End. I try to restart it, but an alert message inform me that i cannot read the movie. What is the issue for solve this problem? The movie is still located on apps movie, but i cannot read it. Please help.

    Having the same problem. Watched 25 minutes of a rental and it stopped with the message"unable to load video"
    Using current version IPad mini.
    Ios7 is  HUGH PIECE OF CRAP!!!!

  • My ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working. i have a a windows PC please help thanks

    my ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working.
    ive tried everything and ive been to the store which was when i was given a new ipad mini. i have a a windows PC please help thanks

    Are you attempting to sync music from your iTunes Music Library on your PC?
    What options do you have set on the Music Tab for your iPad in iTunes?
    What happens when you sync?
    Any error messages?

Maybe you are looking for

  • Problem with post and get (jsp to servlet)

    ===jsp code(login.jsp) out.println("<form action='servlet/Login' action='post'>"); out.println("Username <input type='text' name='user' /><br>"); out.println("Password <input type='password' name='pass' /><br>"); out.println("<input type='submit' val

  • Report doesn't work after upgrading Apex 4.1

    Hi, We have configured Apex to use BIP report, everything works fine until upgrading to 4.1. The error message we got is below: Error processing request. ORA-06502: PL/SQL: numeric or value error ORA-06512: "APEX_040100.WWV_FLOW_RENDER_QUERY", line 6

  • WBS Settlement and FI Postings

    Hi All, Need your input on this. We are doing settlement of costs from WBS to cost center. Let us two cost elements are carrying the costs for the same project. At the time of settlement, an accounting document is being created, but only for one cost

  • No Export of Rejected Photos

    Hi peeps, When editing a shoot, I CTRL+[arrow down] the rubbish pics to set them as rejected. The plan is to delete them before "selecting ALL" in the shoot and exporting. Trouble is I'm always forgetting to delete the rejects before exporting ( ARRG

  • Source selection may no longer be necessary

    Quote: The Apple TV continues to offer the ability to stream media or play it from the device's hard drive, but the updated interface discards the distinction between local and remote storage. Your media is your media - My Movies, for example - and t