What is the Join Between structures (sdpartnerlist) and (vbak or komv )

Hi Dear ,
can anyone tell me that " what is the Join Between structures (sdpartnerlist) and (vbak or komv ) "
or how can i join these structures .

Please do your own research before asking others.
Thread locked.
Thomas

Similar Messages

What is the difference between Structure and Work area

Hi Guys,
What is the difference between Structure and work area?
Are they same with different names?
Thanks,
mini.

hey buddies,*
i had this same doubt for a long time and i have my finds with me ie wa and structure are the same but wa can hold a single record but structure cannot hold data in it but according to the previous posts folks say structure too holds data as wa does but i guess when debugging wa holds data and structure doesnt hold bcoz i tried.
types : begin of str_mara,
             matnr type mara-matnr,
            ernam type mara-ernam,
            end of str_mara.
data it_mara type table of str_mara.
select matnr ernam from mara into it_mara where matnr = '100-101'.
*********************if folks say wa = structure,this should work,isn't it?*********************************
loop at it_mara into str_mara.
write:/ str_mara-matnr , str_mara-ernam.
endloop.
*******************but it throws an error saying that str_mara is not a wa*******************************
i may not be correct too plz let me know if i'm wrong
Edited by: arun_aime on Feb 12, 2010 4:41 PM

What is the diffreence between call transaction and session method

hi gurus
can any one suggest me
what is the difference between call transaction and session methods
in which cases we have to use teh call transaction and
in which cases we have to use session method.
thank you
regards
kals.

CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
Among the two methods call transaction is better compared to session bcoz data transfer is faster in it.
Differences between call transaction and session.
Session Method:
1) Data is not updated in the database table until the session is processed.
2) No sy-subrc is returned.
3) Error log is created for error records.
4) Updation is always synchronous.
Call Transaction Method:
1) Immediate updation in the database table.
2) sy-subrc is returned.
3)Error need to be handled explicitly.
4) updation can be synchronous as well as asynchronous.
2) ya u can use using the N mode no screen.
3)u can't handle multiple transaction in call transaction.
4) u can handle multiple transaction in session using the BDC_INSERT fm.
5)When u go to SM35 u can able to see the error records.
Which is best?
That depends on your requirement. Both of them have there advantages.
According to the situation u can choose any one of these.
difference between batch input and call transaction in BDC Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
For session method,these are the function modules to b used.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
For call transaction,this is the syntax.
CALL TRANSACTION TCODE USING BDCDATA
MODE A or E or N
UPDATE A or S
MESSAGES INTO MESSTAB.
Take a scenario where we need to post documents in FB01 and the input file has say 2000 records (2000 documents, not line items in FB01 but 2000 records)
In the BDC call transaction method
We call the transaction FB01 2000 times (once for each record posting) and if the processing fails in record no 3 it can be captured and start with reocord 4.
Eg: Loop at itab.
call transaction FB01
capture errors
endloop.
In the session method.
We do not explicity call the transaction 2000 times, but all the records are appeneded into a session and this session is stored. The processinf of the session is done wwhenever the user wants it to be done. Hence the errors cannot be captured in the program itself
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Batch Input Session method is asynchronous as told by others here. But the advantage of this is that you have all the error messages and the data for each transaction held persistantly. You don't have to code anything for processing them or writing the logs.
But at the same time, the same feature can be disadvantageous if you need to react to an error or if there are too many errors to manually correct in a session. Since the session are created in the program and its execution is done seperately, you loose the trackability of such transactions.
With a call transaction, what was a disadvantage above will become an advantage. Call transaction immediately gives you messages back and you can react to it in your program. But the disadvantage is that, if you have several hundreds of transactions to run, running them from within the program can be resource crunching affair. It will hamper the system performance and you cannot really distribute the load. Of course, you have some mechanisms with which you can overcome this, but you will have to code for it. Also, storing the messages and storing the errored transaction data etc will have to be handled by you in the program. Whereas, in batch input session, your program's job is to just create the session, after that everything is standard SAP system's responsibility.
Ideally, you should do a call transaction if the resources are not a problem and if it fails, put the errored transaction into a session.
You can decide based on the data volume that your BDC is processing. If data volume is high go for session else call transaction will do.The call transaction updates will be instantaneous where as session needs to be processed explictly after creation.
Session Method
1) Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ...
bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
1) Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E>
update <L/A/S>
messages into BDCMSGCOLL.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as ‘CLASSICAL METHOD’.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Check the following links:
http://www.sap-img.com/bdc.htm
See below example code :
Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.
Once you execute the program and it creates the session at SM35 Transaction.
Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.
Modification Log
Date Programmer Request # Description
06/10/2005 Chetan Shah DV3K919557 Initial coding
report zmppc011 no standard page heading line-size 120 line-count 55
message-id zz.
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
the work center was not determined yet AND
work center was really needed for this line in the input file
then
read the work center from last PP04 operation on the routing
update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform. " read_wc_on_last_pp04
Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.
Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.
Regards,
Sunil Kumar Mutyala

What is the diffrence between SAP View and CAD View ?

What is the diffrence between SAP View and CAD View ?
What is the main purpose of SAP View
and
What is the main purpose of CAD View
On SAP help i found
SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
BUT I did not understand it well
Can someone explain this with an example
THanks
Raj

Hello Raj,
SAP View can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
hope this helps. Let me know if you have further questions else please close the message.
regards
N K

What's the difference between BB10 London and Liverpool?

What is the difference between BlackBerry London and BlackBerry Liverpool? I'm having a hard time with this.
Thanks!
Solved!
Go to Solution.

The only difference is the radio bands within each...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What's the difference between "controlfile autobackup" and "snapshot contro

Hi All,
What's the difference between "controlfile autobackup" and "snapshot controlfile" in RMAN configure ? Both are controlfile backups, what the difference between the controlfiles they backup ? Why there are two of these options ?
thanks

RMAN creates a control file snapshot to perform catalog resync operations. Control file autobackup will automatically create a backup of the control file whenever there are database structure changes.

What is the difference between smart forms and scripts.?

what is the difference between smart forms and scripts.?

Differences between Smartforms and SAPscript
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Routines can be written in smartforms tool.
d) Smartforms generates a function module when activated.
e) Smartforms can create web enable forms like XML
f) smartforms itself contine subroutine pools need not to main separetly like in case of scripts
Request you to refer the following links
www.sap-img.com/smartforms/smartform-sapscripts.htm
www.erpgenie.com/abap/smartforms_sapscript.htm
Sapscript vs Smartforms
Difference with SMARTFORMS vs. SapScript(SE71)
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated
Scripts are client dependent whereas smartforms aren't.
Upto 99 main windows are possible in scripts and only one in smarforms.
To create multiple main windows in scripts, you just have to give the window type as MAIN whnever you create a window.
Scripts still exists but smartforms are in use from 4.6c version, now the lastest version of these two is adobe forms
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaptation of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
Reward Points if useful.

What is the Relationship between Update Rule and Infopackage/Transfer Rules

Hello Experts,
can you help explain these scenarios to me:
What is the relationship between update rules and infopackges?
What is the relationship between transfer rules and infopackges?
What is the relationship between update rules and transfer rules?

Hello,
Info-packages trigger the data load into BW system from the source system. An info-package is created for a specific data source and info source combination.
1) When you trigger the info-package it sends an request to the source system to start the extraction process and this corresponds to the step "Data Request Received" in monitor under details tab. It is the first step.
2) Then the selections specified in the info-package are transferred to the source system to select the requested data from BW system. Then it is sent back to BW system.
3) Once it reach BW, it gets into the PSA and then it gets updated into the data target (depends on what settings are made in IP). No rules (Transfer rules / update rules) comes into picture when data is stored in PSA. Only the transfer structure is used to map the BW info-objects with the source system fields.
4) After data is stored into PSA, the update into the data targets begins. First the transfer rules are applied -> data then flows through the communication structure -> update rules are applied and finally the records gets updated into the data target.
The extraction flow is: -
Source System (DS) -> PSA -> Transfer Rules -> Communication Structure -> Update Rules -> Data target.
Info-package actually triggers the whole data flow in BW system.
Hope it gives you a clear picture.
Thx,
Soumya

What is the difference between, Configuration Components and Software Comp?

Experts,
Can somebody tell me, What is the difference between, Configuration Components and Software Components?

Hi,
Configuration Objects:
You use configuration objects to help you to structure and organize your configuration data in the Integration Directory
You can group configuration objects by using configuration scenarios.
The following configuration objects exist:
1) Collaboration profile objects
    -Communication Party
   -Service
   -Communication Channel
2) Logical routing objects
- Receiver determination
- Interface determination
3) Collaboration agreement objects
   -   Sender Agreement
   - Receiver Agreement
Refer the below help which I did search on SDN:
http://help.sap.com/saphelp_nw04/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm
Softweare component:
http://help.sap.com/saphelp_nw04/helpdata/en/12/003479fa4c2d4aa9d175dcbb081d66/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/37/ae463c75a8477ee10000000a114084/frameset.htm
Thnx
Chirag

What is the differene between class diagram and er diagram .....pls ex

what is the differene between class diagram and er diagram .....pls explain with examples

Diff btw Class Diagrams and ERD's:
Class diagrams and ERDs both model the structure of a system. Class diagrams
represent the dynamic aspects of a system: both the structural and behavioural features.
ERDs, depicting only structural features provide a static view of the system.
Elements of a class diagram:
>class
>association
>binary
>n-ary
>Aggregation
>Composition
>Generalization
>Dependency
>Realization
>Association Classes
Elements of Entity Relationship Diagrams:
>Entity - A data attribute is a property common to an entity.
Check this link
www.cdf.toronto.edu/~csc340h/summer/tutorials/TutorialClassERD.pdf
Regards,
Pavan.

What is the relaion between CATSCO,PA0001 and KONP?

what is the relaion between CATSCO,PA0001 and KONP?

Hi ,
IF am not wrong its links with tables CATSDB -PERNR = CATCSCO-PERNR , konp-knumh = vbap-knumh , VBAP-VBELN = CATSDB-RKDAUF , CATSDB-PERNR = PA0001-PERNR .
TABLES : CATSDB , CATSCO , VBAP , PA0001 , KONP ...
U CAN GET THE DATA BY USING JOIN STATEMENTS ...
Rewards Points if its helpfull
REGARDS
Vind.

What is the difference between Topic Keywords and Index File Keywords?

What is the difference between Topic Keywords and Index File Keywords? Any advantages to using one over the other? Do they appear differently in the generated index?
RH9.0.2.271
I'm using Webhelp

Hi there
When you create a RoboHelp project you end up with many different ancillary files that are used to store different bits of information. Many of these files bear the name you assigned to the project at the time you created it. The index file has the project name and it ends with a .HHK file extension. (HHK meaning HTML Help Keywords)
Generally, unless you change RoboHelp's settings, you add keywords to this file and associate topics to the keywords via the Index pod. At the time you compile a CHM or generate other types of output, the file is consulted and the index is built.
As I said earlier, the default is to add keywords to the Index file until you configure RoboHelp to add the keywords to the topics themselves. Once you change this, any keyword added will become a META tag in the topic code. If your keyword is BOFFO, the META tag would look like this:
<meta name="MS-HKWD" content="BOFFO" />
When the help is compiled or generated, the Index (.HHK) file is consulted as normal, but any topics containing keywords added in this manner are also added to the Index you end up with. From the appearance perspective, the end user woudn't know the difference or be able to tell. Heck, if all you ever did was interact with the Index pod, you, as an author wouldn't know either. Well, other than the fact that the icons appear differently.
Operationally, keywords added to the topics themselves may hold an advantage in that if you were to import these topics into other projects, the Index keywords would already be present.
Hopefully this helps... Rick

What is the diffrence between sap events and application events

Hi all,
what is the diffrence between sap events and application events.Can any one tell me with examples.
regards,

Hi,
Look at this,
System Events (Default)
The event is passed to the application server, but does not trigger the PAI. If you have registered an event handler method in your ABAP program for the event (using the SET HANDLER statement), this method is executed on the application server.
Within the event handler method, you can use the static method SET_NEW_OK_CODE of the global class CL_GUI_CFW to set a function code and trigger the PAI event yourself. After the PAI has been processed, the PBO event of the next screen is triggered.
The advantage of using this technique is that the event handler method is executed automatically and there are no conflicts with the automatic input checks associated with the screen. The disadvantage is that the contents of the screen fields are not transported to the program, which means that obsolete values could appear on the next screen. You can work around this by using the SET_NEW_OK_CODE method to trigger field transport and the PAI event after the event handler has finished.
Application Events
The event is passed to the application server, and triggers the PAI. The function code that you pass contains an internal identifier. You do not have to evaluate this in your ABAP program. Instead, if you want to handle the event, you must include a method call in a PAI dialog module for the static method DISPATCH of the global class CL_GUI_CFW. If you have defined an event handler method in your ABAP program for the event (using the SET HANDLER statement), the DISPATCH method calls it. After the event handler has been processed, control returns to the PAI event after the DISPATCH statement and PAI processing continues.
The advantage of this is that you can specify yourself the point at which the event is handled, and the contents of the screen fields are transported to the application server beforehand. The disadvantage is that this kind of event handling can lead to conflicts with the automatic input checks on the screen, causing events to be lost.
Hope u understood.
Thanks&Regards,
Ruthra.R

What is the diffrence between a javabean and EJB

hi!
what is the diffrence between a javabean and entreprise jvaabeans! i mean which are the uitilization featires of eaxh one !

i am seeking for a solution for my problem , in fact i ma trying to implement and develop an application with java that allows a certain range of IP adresses to be connected to a database server in order to extract the suitable data from the server .
let me explain mor ethe suitation , in fact what i am loking for is to use javabeans to grant my application much more consistence and pertinence : si i am asking if it could be possible to use javabeans in my case especially if i am not trying to developp a web application but a cleint /server one allowing some services.
The application is in fact dealing with a stock exchange market and what i am trying to do is to grant particilar registrated customers to have the informations that they need ( portofolio, currency's status, market indicators, .) also drawing some charts decribing rates, variations, and others specefic financial caracterestics .So , if we consider that this application is not a web application ( no HTTP request and no servers like apache or others ) how it is possible to use javabeans and not EJB to build the application? i mean what could be suitable and preferable to rely on and dvelop to ensure a good java application !!
if you need more details to help you find the answer for me don't hesitate to answer me back !!
Someone here gave me that answer
use RMI to code the services and (Updateable) Value Objects to pass the information between tiers.
RMI is an all-java distributed component framework (ie. EJB, CORBA, DCE/RPC, DCOM, etc.), that is very suitable for developing non-containerized multi-tier applications. Refer to the RMI trail in the Java Tutorial as a starting point for coding RMI solutions (http://java.sun.com/docs/books/tutorial/index.html). Under this scenario you would code the database access service as an RMI service (server-side). Client/server communication should be facilitated through the use of JavaBeans/classes that wrap the information being passed (customer information, portfolio details, market information, etc.) - these are refered to as 'Updateable Value Objects' (a design pattern). Graphing and charting would be handled in your client from the information received from the (RMI) server. GUI JavaBeans can be used to provide this functionality as well as other client-side services. There are numerous "shrink-wrapped" components for GUIs available on the market just peruse any Java magazine to find them.
but how comes? how can i do it !! and where can i find more information please about 'Updateable Value Object "
thanks

What is the Diffrence between Oracle 11 and 11i

What is the Diffrence between Oracle 11 and Oracle11i ?.
With Rgds
Arun J.Isaac

Oracle 11i is internet based and run with java platform where we can see the applets downloading alongwith oracle forms and it refreshes all the jar files in oracle default directory.
Oracle 11 is not intergrated with Java its an Oracle standalone platform.
Regards,
Arumugam S.

What is the Join Between structures (sdpartnerlist) and (vbak or komv )

Similar Messages

Maybe you are looking for