What is the key command to open Audition in Logic 8?

The little play icon in the bin, sample editor, etc.
The one for auditioning things.
Doesn't work for me. The only way I can get, for example, a playback from cursor position in the sample editor--is to manually click on the little green play icon with the mouse. Same with the bin, loops, and so on.
For many years I've had key commands to do this kind of thing, but it is broken for me since Logic 8. What is the key command for this called? I've tried disabling the space bar as a key command, and I've also tried re-enabling it for "play or stop". Although in the latter case, that should still function the way it does in the arrange window.
Actually, I've tried a lot of things and I'm completely out of ideas.
I posted on this subject several months ago and it remains unresolved. For the life of me I cannot get the audition button to work via any key command.
Help?
TIA
Message was edited by: danseq

Hi
If you imported your key commands from version 7 there can be problems in version 8.
Try using one of the key command presets from version 8.
HTH
CCT

Similar Messages

What's the key command : back to last "play position" after I do punch I/O?

I have been try all key commands about "play " function ...
but seems all key command will back to the last recording punch in point,but not back to the last "play" point...
for example:
move playhead to bar 5 and play, punch in at bar 9 and punch out at bar 11..when I hit stop,I wanna go back to "bar 5 and play" ,maybe do punch I/O at 10 ~12 this time ... is there any key command can make play head go back "bar 5 and play" ?(without setting any locator ..go to...or left window edge )
thanx

Hi
If you imported your key commands from version 7 there can be problems in version 8.
Try using one of the key command presets from version 8.
HTH
CCT

What is the terminal command to open sound preferences in Mac Snow Leopard

Hi
I want to know what is the command to open sound preferences dialog from command prompt.
short key for doing this is option key + F12. But I am looking for somehting I can enter in terminal to open sound preferences.

Get under the hood with Command Line and the Terminal. Unix forum is here for fast answer:
http://discussions.apple.com/forum.jspa?forumID=735

What is the touchless command to open a mobile hotspot?

According to Verizon's description:
When powered on, the Verizon–exclusive Droid Maxx is always ready for touchless control–even when it’s asleep. Need to open a mobile hotspot or get GPS directions? Accomplish it all with simple voice commands and without touching your phone (great for when your Droid Maxx is just out of reach).
So... If I say "open mobile hotspot" it opens the menu but does not launch the hotspot itself. Meaning I have to get up and walk over to start it. What is the command that allows me to actually open a hotspot from across the room?

I definitely appreciate the tip, that helped the voice recognition from far away and in noisy environments. However, when I say "open mobile hotspot" it still only opens the menu and you have to walk over to the phone and touch it to check the box that activates the hotspot.
I spoke with a Motorola rep yesterday and they confirmed that the touchless controls will open the app, but will not start the hotspot within the app once it is open. So essentially Verizon exaggerated when they told us we could "open a mobile hotspot from across the room" as it does require you to touch the phone to completely open it.
I love the phone AND Verizon, but it is irritating to get a new phone and discover that it is incapable of one of the main things it is advertised to be able to do.
Sent from my Verizon Wireless 4G LTE DROID

What is the key command for locating a bar and beat

I record myself and clients who want to continually locate and start playing at different bars and beats very quickly so I can punch them in to record. In Digital Performer I use the period key to type in the bar and beat and in Pro Tools I use the equal sign. Maybe I'm asking the wrong key commands question but I can't find the locate bar and beat command in Logic 9. I know it's probably the most simple thing, but I can't waste any more time looking for such a basic operation. Seems like it should be easier to find the command.
Thanks,
gregosophy

Hi
Try a (basic) search of the keycommands for "Go"
Preferences:keycommands
HTH
CCT

What is the keyboard command for opening the disc drive on a G5

fried old keyboard and am using an older one that doesn't have an "open" button. Thanks in advance

Yes, it’s the same for me. In this case I didn’t know about drutil. I don’t want to take this off-topic, but just a quick question to you, chorleyman: I see you’re using a Firebox. Are you satisfied with it? I believe it’s Core Audio compliant. Back then I had to decide to get the Edirol FA-66 or a Presonus Firebox. I’m absolutely happy with mine, but I’m just curious...

What's the key command to change startup discs at startup?

I totally forgot and can't find it in Help. Thanks

Steven Shmerler wrote:
I was wondering if it is still a good prophylactic for occasional maintenance or when things aren't working 100% as a first thing to try.
I never zap the NVRAM/PRAM as a first resort. First I ask myself if the problem I am experiencing might have anything to do with the parameters stored in NVRAM. If not, I don't bother zapping it.
For instance, if an application is crashing, there is a slim chance that would be affected by anything in parameter RAM. I'll look for corrupted preferences or odd file/folder permissions/ACLs first.
But if I am having trouble getting a display or startup disk to be recognized, resetting NVRAM would be higher on the list of things to try because those can be affected by the NVRAM settings.

Whats the key command to show which HD to boot from?

Just installed Leopard but I didnt have my external firewire HD's disconnected and now I'm getting that awesome blue screen. I installed Leopard to a 2nd HD in my case.. so.. what is that key command to show what HD to boot from when the machine boots up?

So.. Uh... I see that Apple is saying that these blue screen problems are when there is "incompatible software" on the computer.. Uh. I'm installing this to a 2nd HD as a full install. How can software from the other HD cause problems?

What's the key stroke command to force quit a program?

What's the key stroke command to force quit a program?

alt-cmd-Escape - then choose from a menu of running programs...

The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command to e

the problem I have since I upgraded to Mavericks version 10.9.1
The problem appears only with Mail not with other programs, not even with my browser.
When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
As I have a problem with my eyes, This is a serious matter for me.
When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

What is the Oracle 12c Forms & Reports relase? what are the key benefits of Product?

Hi All,
Actually I heard from Oracle learning streams . Oracle 12c forms builder planned to release. what are the key features of release . when it is available in OTN ?
I have the following questions : ( Any one can answer me )
1. In Forms Builder PL/SQL Editor why don't we implement the CODE / syntax checker?
2. Is it possible to have the PL/SQL in built features automatically popup as soon as input the command by user ?
3. Is it possible to implement the Forms product without web browser help , I mean independent controller contacts through back end web logic server ?
4. Is It Possible to have more user friendly forms product, I mean fields editing at run time? or more features?
5. Will be getting the Migration assistance tool for 11g r2 to Oracle 12c ?
Many thanks in advance, will appreciate your highly attention on the same .
Thanking you & Best Regards
Purushotham M

Find out the answer to all your questions today April 30th at 1pm eastern time when Oracle Forms PM Michael Ferrante does a webinar with AuraPlayer (www.auraplayer.com) with a sneak peak of Forms 12c.
You can register here
https://attendee.gotowebinar.com/register/8223447940783281921

What is the key Combination to send CTRL-BREAK Key sequence on MacBook Pro

I need to send a CTRL-BREAK key sequence to a router via console terminal. what is the key Combination to send CTRL-BREAK Key sequence on MacBook Pro
I can't seem to find any documentation on how to send a CTRL-BREAK sequence
TIA

In the Terminal application, select the 'Help > Terminal Help' menu item. In the help window that opens, click on the link 'Shortcuts for Terminal.' Scroll down to the line beginning 'Send break.'

Learning the key commands and icons

I see this...
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=8%26sec tion=4%26tasks=true
but is there some help with learning what the strange looking icons mean in the key commands window?
Is there a picture legend somewhere?

Thanks redlogic - perfect!
Now I used to have/use something like 'power keys' or something like that....
that was for extended keys but now I'd like to use something for MBP laptop keyboard...
Is there any kind of cool "laptop key standard" that people use that I can start with and adapt?

What is the diff b\w open form and start form in scripts.

Hi,
can any one tell me what is the diff andb\w open form and start form in scripts.when we should use open form and when start form.

Hi Friend.
I have understood some usefull information and would like to share with you.
Within one transaction, you can open and close several layout sets using OPEN_FORM and
CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control
whether the output is stored in the same print request. But also the SAP spool decides,
depending on several plausibility checks, whether new output is appended to an existing
print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but
several layout sets for different customers. To have the output for each customer begin with
the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the
layout set again. Within one print request, first call the function module END_FORM. It
executes the final processing for the current layout set. Then start the layout set again
using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
Hope your obstacle is cleared.
If not do ask me again?

What is the key command to open Audition in Logic 8?

Similar Messages

Maybe you are looking for