What is the key for skinning of paging navbar in 11.1.1.7?

Hi
jdev 11.1.1.7
Know we have pagination in af:table in 11.1.1.7
what is the key for skinning for these word in table navbar:
1-page
2-of
3-of in parathesis and items in paranthesis
4-tooltip of hover on page number inputtext (go to page)
Thanks

Hi Timo
Thank for your reply
I used http://docs.oracle.com/cd/E28280_01/apirefs.1111/e15862/toc.htm this and find af_table.TIP_LAST_PAGE and others but nothing find for key mentioned in first post and when I use af_table.LABEL_NAVBAR_ROW_RANGE_KNOWN_COUNT=something in resourceBundle,I see in runtime instead of for example (1-20 of 900 Items) ,something.
please help

Similar Messages

Question:what is the key for it to support SAP?

Hi, I am a new SAP member, i have a question about if i work for IT department, what will be the key for me to support ERP-SAP???
Any experts can help me??
Thank you so much

Dear,
I didnt get it....
I am a new SAP member, i have a question about if i work for IT department, what will be the key for me to support ERP-SAP???
You mean you are joined IT department - what's your role to support with ERP-SAP???
Or you joined IT department as ERP power / super user???
Anyway.. considering _if i work for IT department, what will be the key for me to support ERP-SAP_
You have to install Front end GUI in all user systems and configure clients (SAP clients 300, 786, sandbox etc) whichever applicable to set. Takr care and maintain the servers, network connectivity, installing the SAP supported printers and configure them in ERP to get print out etc.
Hope this what you looking for ... if not pls. do reply.
Regards,
Syed Hussain.

HT1937 hi how can i active my iphone 3gs i am in iraq and the server was stoped so what is the key for that ?

hi every one i living in tout that have no any place that help me like apple costumer care so i have iphone 3gs i made restore for it and i cant activate it so how can i do that any all my stuff in it my songs picture and data
any way if some one can help me i will be thanksfull for him
good buy

You cannot activate it because it was most likely hacked or jailbroken. Was it?

What are the Entrie For ETT Keys In CIN

Hi,
This is harish i would like to know what are the entrie when system pick ETT Key for DLFC
what is the entrie for GRPO
what is the entry for EMPO
what is the entry for CAPE
Regards,
Harish

Hi,
Please refer to this link for better understanding of CIN
[CIN|http://www.docstoc.com/docs/8264622/CIN]

What are the ranges for correct skin tones using RGB%?

What are the ranges for correct skin tones using RGB%? Used to using a scale from 0 to 255. But with LR it's RGB , I know 100% RGB is white. What do you use for %?

While I whole heartedly agree that we should not be constrained to hard and fast numbers for accurate skin tones ... LR does offer an RGB color readout ... I am assuming they made those percentages available for the user to monitor the breakdown of specific color values for a reason ... so we could have an indication of how a specific color in an image will be reproduced ...
I liken this to using a speedometer ... while many experienced drivers in well tuned vehicles can travel on the highway at the prescribed legal speed limit without really monitoring the readout on the dashboard ... however, there are times when they would like to verify the speed at which they are traveling ... the RGB color percentage readout in LR is no different ... just a source of information to verify you are achieving what you desire ...
Again, going by specific numbers in this instance, I believe, could lead to problems ... there may be times when you may desire or actually need to adjust skin tones ... even though a pleasing WB has been achieved ... the relationship of R, G and B can be used to get you there.
From what I have researched and put into practice with LR the following seems to be a good starting point and the data was borrowed from "the pixelation" blog:
R: highest %
G: middle %
B: lowest %
To get a little more specific. In general,
R: Y + (15-20)
G: average of R and B
B: R – (15-20)
For example, the following values represent common Caucasian skin tones using the rules above:
* R: 80%; G: 70%; B: 60%. R is 20 points higher than B, and G is midway between R and B. That’s perfect.
* R: 86%, G: 78%; B: 70% also reflects a nicely balanced skin tone. Again, G is midway between R and B, and R is 16 points higher than B. This, too, illustrates a great relationship among the colors.

I have a fairly new mac book pro with retina display- I have not tried installing anything other OS on it. In spite of that yesterday when I turned it on, I got the error: no bootable device insert boot disk and press any key. what is the reason for this?

I swithced it on by clicking on options when I start up and then clicked on Macintosh HD. the other option was a question mark and network drive.
Is there a way to ensure it never happens again, what is the cause for this problem, if I need to uninstall some application, i am happy to do it as long as I know what is causing this conflict.
many thanks!

Something is not making sense here.
You claim this is a brand new machine and you have not tried to install Windows or Boot Camp.
Then why would you ever even go into System Preferences > Startup Disk and choose Macintosh HD? It should have automatically booted into Macintosh HD.
You're probably going to have to reinstall Mac OS X.

What are the Keys to push for "Apple-Check on functionality of MacBookPro"?

My six months old Mac Book Pro worked well until yesterday,
I shut it down and some hours later (after having placed it in my safe)
I could not restart Yosemite OS X:
1. Electric Power On - works - the MacBook is on, but
2. MacBookPro shows a dark empty screen: nothing on the screen and not going into the process of loading Yosemite OS X.
3. please send me the link to the Apple-Keys to push, to let Apple.com check my MacBookPro.
Support me with the Keys for "Apple-Checks my MacBook on functionality", please.

      Apple Diagnostics
      https://support.apple.com/en-us/HT202731
      Reset PRAM. http://support.apple.com/kb/PH18761?viewlocale=en_US&locale=en_US
      Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

What is the alternative for DisplayMemberPath="Value" for Windows Store applications?

I think there is a bug with Windows Store Applications when it comes to using DisplayMemberPath="Value".
Here is my code
<ComboBox Height="40" VerticalAlignment="Stretch" SelectedValuePath="Key" DisplayMemberPath="Value" x:Name="comboBox1" FontSize="25"/>
var source = new Dictionary<string, double>();
source.Add("Item1", 0.4);
source.Add("Item2", 0.3);
source.Add("Item3", 0.1);
source.Add("Item4", 0.1);
var formateDSource = new Dictionary<string, string>();
foreach (var item in source)
formateDSource.Add(string.Format("[{0}, {1}]", item.Key, item.Value), item.Key);
comboBox1.ItemsSource = source;
If you use this code in WPF in works perfectly. However if you use this code in a Windows Store Application then the Combo Box is empty and an error is thrown. So is there an alternative way to do this in Windows Store Applications and have I unearthed a
bug? Because I have researched the Web for days and found no solution to this.*please do not comment unless you have tried my code as a Windows Store App not a WPF in Visual Studios. Can Someone post an example based on my code that works in Windows Store
Apps please because this is terrible.
Thanks

It looks like you got an answer on SO:
http://stackoverflow.com/questions/29817124/what-is-the-alternative-for-displaymemberpath-value-for-windows-store-applicat
This does look like a bug.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the key requirements to write a recursive cte?

what are the key requirements to write a recursive cte?
when we will go for a recursive cte.

A common table expression (CTE) can be thought of as a temporary result set that is defined within the execution scope of a single SELECT, INSERT, UPDATE, DELETE, or CREATE VIEW statement. A CTE is similar to a derived table in that it is not stored as an
object and lasts only for the duration of the query. Unlike a derived table, a CTE can be self-referencing and can be referenced multiple times in the same query.
A CTE can be used to:
Create a recursive query. For more information, see https://technet.microsoft.com/en-us/library/ms186243%28v=sql.105%29.aspx
Substitute for a view when the general use of a view is not required; that is, you do not have to store the definition in metadata.
Enable grouping by a column that is derived from a scalar subselect, or a function that is either not deterministic or has external access.
Reference the resulting table multiple times in the same statement.
Source : https://technet.microsoft.com/en-us/library/ms190766%28v=sql.105%29.aspx

What are the key steps & order to follow: changes in my flat file structure

HI,
I have a Cube which sits on ODS.
In the ODS, the are 6 characterisics: Char1, Char2,...., char6; and 3 key figures: kf1, kf2, and kf3.
The ODS is loaded through a flat file.
Through an update rule and startup routine, the ODS updates the cube.
Now, I have a new requirement to add 2 new characteristics (Cha10, char20) and one 2 key figures (KF55, KF66)).i.e. the flat file will now be coming in with these new fields.
I have an idea but this this is the first time I really have to implement, I need to be sure.
What are the key steps that I need to go through and in what order?
Thanks

What version are you running ?
Will you need to load history data as for these new fields or is it just going forward ?
Is it all one to one mapping for the new fields ?
1. Make sure you know to what dimensions you need to add the new chars ? New dimension for these two ?
2. New chars to be made keyfields ?
3. Update Type for keyfigures Overwrite or Additive ?
Enhance the Cube, DSO, change TRFN/TR/UR..

What is the logic for 2LIS_17_I3HDR to pick a order as completed on time?

Hi, Experts:
I am working on PM using 2LIS_17_I3HDR to load data. In 2LIS_17_I3HDR, there is a field called "orders completed on-time". I am wondering what is the logic for 2LIS_17_I3HDR to identify if an order was completed on time. I would assume it compares some kind of completion/finish date with a planed/schduled comletion/finish date. Would someone please tell me what fields in what table or in transaction IW39 DOES does 2LIS_17_I3HDR use for this?
Many thanks!
Jenny

Hi, Ram:
Thank you for the reply!
The key figure is ZHLAFIH_TGERL (Number of On-time Closed Orders). I saw some SAP programs refering to its component type "DZHLAFIH_TE" too.
Thanks,
Jenny
Edited by: Jenny Chen on Dec 2, 2009 7:53 PM
Edited by: Jenny Chen on Dec 2, 2009 7:55 PM

What is the password for 'oracle' user created during XE installation?

Hi,
What is the password for 'oracle' user automatically created when XE is installed?
I installed XE on Linux and it's created under 'oracle' user, but I don't know 'oracle' password. So, I cannot stop TNS listener.
During configuration, it prompted me to enter SYS and SYSADMIN password but it didn't ask me to enter 'oracle' user password.
Please let me know or point me to the document.
Thanks,
N

Hi Jari,
I tried your suggestion, but it didn't work unfortunately.
When I type (sudo su -oracle) as follows, it still prompts the password. When I hit Enter key w/o anything, it seems to proceed and the prompt shows up in the following line. So, I thought it was successful, but when I checked 'whoami', it's not logged in as 'oracle'.
So, I created the password for 'oracle' and logged in as 'oracle' using a new password. Then, I stopped TNS listener to uninstall XE.
It would be nice if it's documented in XE document somewhere... since it's created by XE installation, I assumed some kind of default password was used.
Thanks,
N

What is the key for skinning of paging navbar in 11.1.1.7?

Similar Messages

Maybe you are looking for