What is the key to Keychain Access?

Having recently used Target Disk Mode to successfully rescue my files and reinstall them, I was feeling pretty pleased with myself … BUT! When I went to checkout Keychain Access I found I could only remember the password for the keychain I had created to keep track of the many different Username/Password combinations I have collected over time. I couldn't unlock my "login" keychain.
Since most login details were itemised in the "~" keychain (as mentioned), I thought I would simply Reset the "login" keychain. I must have had the"~" keychain selected, because it disappeared and I ended up with two "login" keychains showing in Keychain Access!
Somehow after that when I went looking, trying to figure out what had gone wrong, and seeking to delete one of the two "login" keychains, they both disappeared from Keychain Access and I was left with no one but two "System" keychains showing.
At this point I decided to leave 'bad enough' alone and see if someone in the Apple Discussions community can put me right. I should point out that in my ~/Library/Keychains folder there are three files: "login.keychain", "~.keychain" and "MicrosoftIntermediateCertificates"; none of which appear in Keychain Access. Why is this so and is there a way to persuade the OS to accept them back again. I note that when I click on File>Import, they appear 'dulled' and cannot be selected - even when dragged to the desktop.
Yes I love my Mac … but sometimes the relation gets a bit strained.

Not sure how we're going to get out of this, but a few links...
Mac OS X 10.4: Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631
How do I reset a Mac OS X Keychain Password?...
http://www.tech-faq.com/reset-mac-os-x-keychain-password.shtml
http://support.apple.com/kb/HT1631
There can be 3 locations for Keychains...
/Library/Keychains
/System/Library/Keychains
/Users/YourUserName/Library/Keychains
Open Keychain Access in Utilities, use Keychain First Aid under the Menu item, then either check the Password under that item, change it, or delete it and start over.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
Drag this file to the desktop and reboot...
/Users/YourUserName/Library/Preferences/com.apple.keychainaccess.plist

Similar Messages

What are the key requirements to write a recursive cte?

what are the key requirements to write a recursive cte?
when we will go for a recursive cte.

A common table expression (CTE) can be thought of as a temporary result set that is defined within the execution scope of a single SELECT, INSERT, UPDATE, DELETE, or CREATE VIEW statement. A CTE is similar to a derived table in that it is not stored as an
object and lasts only for the duration of the query. Unlike a derived table, a CTE can be self-referencing and can be referenced multiple times in the same query.
A CTE can be used to:
Create a recursive query. For more information, see https://technet.microsoft.com/en-us/library/ms186243%28v=sql.105%29.aspx
Substitute for a view when the general use of a view is not required; that is, you do not have to store the definition in metadata.
Enable grouping by a column that is derived from a scalar subselect, or a function that is either not deterministic or has external access.
Reference the resulting table multiple times in the same statement.
Source : https://technet.microsoft.com/en-us/library/ms190766%28v=sql.105%29.aspx

Cannot remove key from keychain access

I just upgraded to Lion today (7/14/2012) on my mother's 1 year old iMac, and cannot get Back to My Mac working in iCloud with my account.
I've tried the trick of removing the Back to My Mac keys from Keychain Access to fix this, which worked on my own MacBook Pro, but here I get an error that the key(s) cannot be found.
Does anyone have any other advice on how to get Back to My Mac working in iCloud?

I also tried Keychain Firstaid, to no avail.

What is the quickest way to access the Settings on an iPad?

What is the quickest way to access the Settings on an iPad? (I mean, the usual cogwheel "app" called Settings)
In particular, I'm looking for a quicker way (or a more convenient one) to access it from an open application, than hitting the "home" button, possibly swiping the home pages, and tapping on it.
(I know, I know, I already placed it in the bottom bar, so I have it available from all pages...)
It would be great if I could cut another step or two. I mean, there are situations where I need to use the Settings app repeatedly. I wonder why it was not included in the iOS 7 swipe-from-bottom menu, while the "Camera" or "Countdown Timer / Clock" made the cut.
I know everybody will have a different opinion on what should be included in that menu, and choices have to be made, but still...
for example, on my Android smartphone the newer OS updates placed a shortcut to the settings app in the upper-right corner of the swipe-down menu, which is like the most prominent place you could place it in.
Anyway, do you know of one or more alternative ways to access the Settings app?
(Oh, and yeah, it just occurred to me that I can four-finger swipe it, if I have accessed it recently, but again if I access another app or two in between it will become at least as cumbersome as going through the home page).

Anyway, do you know of one or more alternative ways to access the Settings app?
Short answer, no. If you have a suggestion for future iOS functionality, use the feedback functionality found elsewhere on this site.
Barry

What are the key fields used to group double orders in t-code SDD1?

What are the key fields used to group double orders in t-code SDD1?
Cheers,
VT

Hi,
You can group the duplicate sales documents with the help of the following fields,
Sold-To-Party,Document type,date and sales area details.
Regards,
Gopal.

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

What are the key steps & order to follow: changes in my flat file structure

HI,
I have a Cube which sits on ODS.
In the ODS, the are 6 characterisics: Char1, Char2,...., char6; and 3 key figures: kf1, kf2, and kf3.
The ODS is loaded through a flat file.
Through an update rule and startup routine, the ODS updates the cube.
Now, I have a new requirement to add 2 new characteristics (Cha10, char20) and one 2 key figures (KF55, KF66)).i.e. the flat file will now be coming in with these new fields.
I have an idea but this this is the first time I really have to implement, I need to be sure.
What are the key steps that I need to go through and in what order?
Thanks

What version are you running ?
Will you need to load history data as for these new fields or is it just going forward ?
Is it all one to one mapping for the new fields ?
1. Make sure you know to what dimensions you need to add the new chars ? New dimension for these two ?
2. New chars to be made keyfields ?
3. Update Type for keyfigures Overwrite or Additive ?
Enhance the Cube, DSO, change TRFN/TR/UR..

What is the best way of accessing application module without page binding?

Hi All
I am using Jdeveloper 11g R2 (11.1.2.3) & Weblogic 10.3.5.0
What is the best way of accessing application module without page binding?
In my application after user authenticated from LDAP
I need to read some information from database and set my menues.
Thanks
Mohsen

Hi,
if you don't have a binding the I am not sure the binding context is created. Anyway, try
BindingContext.getCurrent().findDataControl("name here as ID in DataBindings.cpx") and see if it returns a valid instance
Frank

Hello! I have a MAC OS X version 10.6.8. What is the best way to access to lion?Thanks

Hello,
I have OS X version 10.6.8. What is the best way to access to lion?
Thanks

You obtain Lion by purchasing, then downloading and installing it over the internet from the Apple App Store.
Hope this helps

What is the key column name and value column name in JDBC Adapter parameter

Hi
Can any one please tell me what is the Key Column Name and Key Column Value in JDBC adatper parameters. If i dont mention those parameters i am getting the following error
<b> Value missing for mandatory configuration attribute tableEOColumnNameId</b>
Please help me
Best Regards
Ravi Shankar B

Hi
I am doing DataBase Lookup in XI
First i have created a Table in Database( CheckUser) which has two fields UserName and PhoneNumber and then i have created
I have created one Communication Channel For Reciever Adapter .
I have given the parameters like this
JDBC Driver : com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection : jdbc:microsoft:sqlserver://10.7.1.43:1433;DatabaseName=Ravi;
UserName.... sa
password.... sa
persistence : Database
Database Table Name : CheckUser
Key column name and Value column name i left blank and activated
and then
I have created
Data Types : Source ...... UserName
                  Destination.... PhoneNumber
Message Types
Message Interfaces
In Message Mapping
              I have created one User Defined function DBProcessing_SpecialAPI().This method will get the data from the database....
In this function i have written the following code
   //write your code here
String query = " ";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
query = "select Password from CheckUser where UserName = ' " +UserName[0]+ " ' ";
try {
     channel = LookupService.getChannel("Ravi","CC_JDBC");
     accessor = LookupService.getDataBaseAccessor(channel);
     resultSet = accessor.execute(query);
     for(Iterator rows = resultSet.getRows();rows.hasNext();){
          Map rowMap = (Map)rows.next();
          result.addValue((String)rowMap.get("Password"));
catch(Exception e){
     result.addValue(e.getMessage());
finally{
     try{
          if(accessor != null)
               accessor.close();
     }catch(Exception e){
          result.addValue(e.getMessage());
And the i have mapped like this
UserName -
> DBProcessing_SpecialAPI----
>PhoneNumber
when i am testing this mapping i am getting the following error
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Dest_JDBC_MT xmlns:ns0="http://filetofilescenario.com/ilg"><phoneNumber>Plain exception:Problem when calling an adapter by using communication channel CC_JDBC (Party: , Service: Ravi, Object ID: c360bc139a403293afbc49d5c46e4478) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:c360bc139a403293afbc49d5c46e4478 not available in CPA Cache.
com.sap.aii.mapping.lookup.LookupException: Problem when calling an adapter by using communication channel CC_JDBC (Party: , Service: Ravi, Object ID: c360bc139a403293afbc49d5c46e4478) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:c360bc139a403293afbc49d5c46e4478 not available in CPA Cache.
     at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.<init>(AdapterProxyLocal.java:61)
     at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.getProxy(SystemAccessorInternal.java:98)
     at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.<init>(SystemAccessorInternal.java:38)
     at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.getConnection(SystemAccessorHmiServer.java:270)
     at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:70)
     at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
     at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:296)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
     at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
     at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
</phoneNumber></ns0:Dest_JDBC_MT>
In RWB i have checked the status of JDBC driver its showing the following error
<b>Value missing for mandatory configuration attribute tableEOColumnNameId</b>
Best Regards
Ravi Shankar B
Message was edited by:
        RaviShankar B

What is the easiest way to access the router from an iPad? I have no problems accessing it from my laptop. Even though I am entering the address in the left address box, not the Google search box, it wants to do either a search, or add www beginning of

What is the easiest way to access the router from an iPad? I have no problems accessing it from my laptop. Even though I am entering the address in the left address box, not the Google search box, it wants to do either a search, or add www to the beginning of the IP address.
I usually can eventually access the router, but it is way to much trouble. However, I use my iPad hundreds of times more often than my laptop.

Are you typing http:// in front of the IP address of the router? e.g. http://192.168.0.1
Sometimes, and with some routers it doesn't seem to like it if you miss off the http://

What are the key benefits and limitations of new pricing model of X5-2?

What are the key benefits and limitations of new pricing model that started with X5 version?

1. Elastic Configurations
Size/price hardware by the number of servers; Fixed configs no longer required
Start with 2 Database Servers and 3 Storage Servers. Incrementally add database or storage servers online.
2. Capacity-on-Demand (CoD)
Upon installation, activate 40-100% of the cores per server and reduce software licenses; Applies to Eighth Rack now too
Activate and license more cores when needed; Active cores may not be deactivated
3. OVM and Trusted Partitions
License software on Virtual CPUs within a VM; Ideal for special-purpose DB options
You can mix different combination of options for different DB on one Exadata.
OVM has no License cost; support is included with premier hardware support
Limitation:
At least 40% of usable cores on the machine must be licensed for Oracle software
Cannot use both OVM and CoD to license less than 40% of cores
A server must be virtualized or non-virtualized – not mixed
A RAC cluster can mix virtualized and non-virtualized servers
4. “Flash Drive” License Metric for EF Storage Server Software
$20K/drive; 8 flash drives/EF server vs 12 disk drives/HC server = 33% higher list
Can transfer licenses between Flash Drive (2 licenses/drive) and Disk Drive (1 license/drive) – part # is the same

What is the Oracle 12c Forms & Reports relase? what are the key benefits of Product?

Hi All,
Actually I heard from Oracle learning streams . Oracle 12c forms builder planned to release. what are the key features of release . when it is available in OTN ?
I have the following questions : ( Any one can answer me )
1. In Forms Builder PL/SQL Editor why don't we implement the CODE / syntax checker?
2. Is it possible to have the PL/SQL in built features automatically popup as soon as input the command by user ?
3. Is it possible to implement the Forms product without web browser help , I mean independent controller contacts through back end web logic server ?
4. Is It Possible to have more user friendly forms product, I mean fields editing at run time? or more features?
5. Will be getting the Migration assistance tool for 11g r2 to Oracle 12c ?
Many thanks in advance, will appreciate your highly attention on the same .
Thanking you & Best Regards
Purushotham M

Find out the answer to all your questions today April 30th at 1pm eastern time when Oracle Forms PM Michael Ferrante does a webinar with AuraPlayer (www.auraplayer.com) with a sneak peak of Forms 12c.
You can register here
https://attendee.gotowebinar.com/register/8223447940783281921

What is the key command to open Audition in Logic 8?

The little play icon in the bin, sample editor, etc.
The one for auditioning things.
Doesn't work for me. The only way I can get, for example, a playback from cursor position in the sample editor--is to manually click on the little green play icon with the mouse. Same with the bin, loops, and so on.
For many years I've had key commands to do this kind of thing, but it is broken for me since Logic 8. What is the key command for this called? I've tried disabling the space bar as a key command, and I've also tried re-enabling it for "play or stop". Although in the latter case, that should still function the way it does in the arrange window.
Actually, I've tried a lot of things and I'm completely out of ideas.
I posted on this subject several months ago and it remains unresolved. For the life of me I cannot get the audition button to work via any key command.
Help?
TIA
Message was edited by: danseq

Hi
If you imported your key commands from version 7 there can be problems in version 8.
Try using one of the key command presets from version 8.
HTH
CCT

What is the key for skinning of paging navbar in 11.1.1.7?

Hi
jdev 11.1.1.7
Know we have pagination in af:table in 11.1.1.7
what is the key for skinning for these word in table navbar:
1-page
2-of
3-of in parathesis and items in paranthesis
4-tooltip of hover on page number inputtext (go to page)
Thanks

Hi Timo
Thank for your reply
I used http://docs.oracle.com/cd/E28280_01/apirefs.1111/e15862/toc.htm this and find af_table.TIP_LAST_PAGE and others but nothing find for key mentioned in first post and when I use af_table.LABEL_NAVBAR_ROW_RANGE_KNOWN_COUNT=something in resourceBundle,I see in runtime instead of for example (1-20 of 900 Items) ,something.
please help

What is the key to Keychain Access?

Similar Messages

Maybe you are looking for