What is the largest HDD that is compatible with a MBP early 2011 15"?

My current storage setup is one 256 GB SSD as the boot drive in the original location for the hard drive. I then removed the SuperDrive and put my original hard drive in an optibay. I have since run out of storage (lots of audio samples etc.) and I'm looking at a 3TB internal hard drive. Or around that size anyway.
Can anyone advise as to what the maximum capacity for my laptop is?
Thanks.

Have a look at this article to give you an idea on your negotiated link speed when you install a hard drive in your optical drive bay.
installing a SATA III hard drive will not give you any issues - it might give you a negotiated link speed of 3GB/s instead of 6GB/s. 
http://blog.macsales.com/10433-macbook-pro-2011-models-and-sata-3-0-6-0gbs-updat e-5272011

Similar Messages

  • I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

    I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

    The largest capacity HDD that you can install is the HGST 1.5 TB HDD:
    http://eshop.macsales.com/item/HGST/0J28001/
    Any 2.5" 9.5mm thick SATA HDD will fit and operate in your MBP, regardless of capacity.
    Ciao.
    Message was edited by: OGELTHORPE

  • What is the latest version of iWorks compatible with OS X 10.7.5?

    What is the latest version of iWorks compatible with OS X 10.7.5? I have a Mac Book Pro 2,2.

    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&mforum=iworktips ntrick
    If you buy the Amazon version for US$19.95 make sure you update it to iWork '09 4.3.
    Peter

  • DKA790GX Platinum - What's the best card that will work with hybrid crossfire?

    Hi everyone. I know this board is a bit old now but I've set it up for my kids to play oldish games and it occurred to me that video cards from that era might be inexpensive these days. What's the best possible card to use with the on-board card for its hybrid crossfire? Would it be better to just get a separate standalone card? If so what's the best that will work with this board? I'm completely out of the loop these days on tech and have no idea what will even be compatible anymore.

    Quote from: KrisWood on 12-June-12, 00:27:34
    Good news! I resolved my graphics issues without buying a new card. It all came down to a little logic. It used to work just fine. The game it's installed off the same disc as before, and there us no noticeable change in the install media. The hardware has not changed unless there has been some sort of electrical damage I cannot see. I had however updated my drivers many times over the last few years, and always from the AMD website.
    I installed the latest MSI drivers for my onboard graphics and voila, it works!
    All graphical glitches are now gone, though it runs a but slower.
    I may still buy a new card. I'm favouring the HD4870x2 as the top of my motherboard's era or the slightly newer HD5770 which some reviews say is equivalent in performance. The latter uses the same GPU and shaders as the 6770 and is considerably cheaper.
    If I go with NVidia it seems the best card in my price range is the 440GT.
    Thanks, everyone, for all the advice!
    i'd say the 790GX chipset would run a saphire radeon HD5770 card fine i have 1 of them on a different maufactures board that uses the AMD 690GX chipset and i have put both my HD5770's in that with crossfire on and had no issues at all just to try it out!
    and the AMD 690GX is a lower more old chipset then the one your board has so i wouldnt see any issues with the board not accepting the HD 5770 cards at all!
    i like the saphire branded ones better as they run much cooler and quieter then a stock card!

  • What is the largest hdd i can use in a compaq c770us laptop?

    i want to replace the hard drive in my C770US laptop, it came with a 160gb hdd, and i want to put in a 1tb or larger hard drive, im not sure what type of hard drive to buy, the original hard drive was a SATA I, and most HDD available are SATA II and SATA III, and so im wondering, will the SATA II and SATA III hard drives work in a C770US laptop?

    After much research I found that 750 GB is the largest compatible HDD available for these older laptops, here are the model numbers of 500 GB and 750 GB Seagate and western digital HDD.
    ST9500423AS ---500gb
    WD7500BPVT ---750gb
    ST9750420AS ----750gb
    ST95005620AS ----500gb
    WD5000BPVT ----500gb

  • What is the "best" internal hard drive compatible with macbook pro 13.3" product number: MD101LL/A  that does not damage OS?

    I'm looking for an upgrade in space ( 750gb - 1 TB) and performance on the hard drive, but I have read in many forums that many "compatible" hard drives may damage the OS. I plan on installing bootcampt with Windows 7 and the latest Mac OS. I'm wondering if anyone has updated their HD and if they've experienced any problems with it, or if anyone has any suggestions. Thank you for your advice in advance!

    rchu89 wrote:
    I'm wondering if anyone has had any particular experience with the Seagate 1TB solid state hybrid drive (found here: http://www.amazon.com/Seagate-Solid-Hybrid-2-5-Inch-ST1000LM014/dp/B00B99JUBQ). It boasts SSD-like speeds at a fraction of the cost, and its right around my budget, but perhaps its too good to be true?
    I have two of those Seagate SSHDs, using one as the internal drive in my primary MBP.  Boot and shutoff times are dramatically less than before (using 7200 rpm HGST HDDs).  In other respects, I have no complaints regarding the drive performance.  I can recommend them based on my limited experience (~3 months).  The $99 price does look very attractive.
    Note that when you install a HDD of larger capacity in a MBP, it should be reflected in your backup strategy.  Do you have a backup drive to accommodate the additional data that you will be able to store on the new internal HDD?
    Ciao.

  • I am not getting the site launcher that is compatible with firefox 5, so by when it will be launched?

    i am using firefox 5, it is very good but it has compatibility problem with site launcher, mean the site launcher for ff5 is not available. I have downloaded the site launcher 1.6.4 and installed it but it is not accepting any shortcut and it is not triggered when ctrl+shift combinations.
    so by when it's latest version will be out for use or launched.

    I was wondering if it was the sites use of [http://stackoverflow.com/questions/3868299/is-autocomplete-off-compatible-with-all-modern-browsers/21348793#21348793 autocomplete-off] but that changes with Fx30 (already changed in pre-release) and already differs in some other browsers and you continue to have the problem with other browsers.
    I need to be clear exactly what you do and see. It would also help to know what the site is, although unless it is public and free it probably can not be tested by others, but it does at least enable a search to be made for reports of the problem.
    Can you list exactly the steps you take and what you expect to see or happen compared with what does or does not happen.
    If this does hinge on how a particular individual site behaves it is not actually a Firefox problem and although someone may provide an answer it may be better asking somewhere else such as
    * http://forums.mozillazine.org/viewforum.php?f=25 <br />If you do post please provide the link so others may follow progress.
    Have you ruled out that other security related software could be interfering, and if this is a problem at work have you asked your IT department.

  • What consumer camera are using that is compatible with FCE 4?

    And using an external drive (that is key, have to have soemthing that works with FCE4 and ext drive)
    Hi, I am reading through these forums and there seem to be so many compatibility issues in the HD area. It looks like some are just user
    settings and then others the actual camcorder just doesn't work with
    FCE 4.
    I am trying to find a consumer type HD camcoprder that will work with a INTEl based MAC abnd an external drive
    The type of camcorder that is $1200 or less
    But after readingt hese forums, it seems like more people have nightmares than good experiences with HD and final cut 4 at this point
    I don't know what to buy or think
    Thank you, sorry, it's just seems consfusing yet I can handle the editing and operating a camcorder but it's compatibility that concerns me (especialyy with hrad earned money and a possiblity that you can't return an electronic item, like a camcorder in some stores without a re-stock fee
    Thank you!
    Message was edited by: Renne West
    Message was edited by: Renne West

    Hi there,
    I am using a Sony HDR-TG3 (TG1 in the USA) and FCE4.0.0 and now FCE4.0.1.
    FCE4.0.1 will allow 1920x1080i work were are FCE4.0.0 is limited to 1440x1080i with this camera.
    I have an external Maxtor One Touch FW400 200GB scratch disk. I recently upgraded this disk to a 1TB. I bought a seperate enclosure Macpower FW800 unit and Samsung Spinpoint 1TB, 32MB Cache, 7200RPM SATA disk. I really just needed to extra work space. But the Maxtor on the FW400 was also perfect for AVCHD importing and editing in FCE from my Sony HDR-TG3.
    Hope this helps.

  • What is the fastest processor that will work with a mega 651?

    HI, I have build a couple of 651;s in the past and am looking to build the ultimate one...
    according to msi the 2.8Ghz Northwood P4 is the fastest - is that correct or has anyone out there got a faster P4 to work in that machine.
    cheers
    John

    Mega 651 CPU support list:
    http://www.msi.com.tw/program/products/slim_pc/slm/pro_slm_cpu_support_detail.php?UID=431&kind=4

  • I would like to know if a particular HDD is compatible with my 13" Early 2011 MBP

    I have an Early 2011, 13" MBP with the following operational characteristics and want to know if an HGST Travelstar 2.5-Inch 500GB 7200RPM SATA III 32MB Cache SATA 6Gbps hard disc upgrade will be compatible with my system?  This question has probably been asked already but I cannot seem to make a whole lot of distinct sense out of responses so I figured I would just ask in my own terms.  Please bear with me.
    Hardware Overview:
      Model Name:    MacBook Pro
      Model Identifier:    MacBookPro 8,1
      Processor Name:    Intel Core i5
      Processor Speed:    2.3 GHz
      Number of Processors:    1
      Total Number of Cores:    2
      L2 Cache (per Core):    256 KB
      L3 Cache:    3 MB
      Memory:    8 GB
      Boot ROM Version:    MBP81.0047.B27
      SMC Version (system):    1.68f98
      Serial Number (system):    C02GD24FDRJ7
      Hardware UUID:    0343A0B9-8898-527E-B965-4A15E7619B0D
      Sudden Motion Sensor:
      State:    Enabled
    Intel 6 Series Chipset:
      Vendor:    Intel
      Product:    6 Series Chipset
      Link Speed:    6 Gigabit
      Negotiated Link Speed:    3 Gigabit
      Description:    AHCI Version 1.30 Supported

    i use an older sata I enclosure when i clone drives for myself and my friends....no issues so far...
    i also have sata II usb enclosure that i use but i prefer the older one i have since it's one of those quick release cases.
    in any event, i've never had any issues....and i've been using it to clone SSD
    good luck...

  • Is benq GL2440 monitor compatible with Mac Mini (early 2011)

    Hey all
    Bought a Benq GL2440 monitor to go with my mini (not latest, previous)
    but when connected via HDMI nothing but a msg saying 'no cable connected'
    Any one got a solution ?

    That's correct, the link perfectly describes the Apple 20" Cinema Display I have. With the new Mac Minis requiring an HDMI cable to link to a display, the HDMI to DVI (female) adapter looks like the one I need. I found this on Amazon: http://www.amazon.com/Gino-Black-Female-Converter-Adapter/dp/B006Z8N60C/ref=sr_1 _18?s=electronics&ie=UTF8&qid=1371158207&sr=1-18&keywords=hdmi+to+dvi+adapter+ca ble
    This adapter is an all-in-one plug with no cable linking the HDMI to the DVI ends. It looks like it might be too wide to plug in anything immediately adjacent to the HDMI socket on the Mac Mini due to the width of the adapter when the adapter is plugged in. However, I could get around this by purchasing an extension cable with HDMI male on one end and the HDMI female on the other if I had to.
    However, one of the comments said that the DVI is video-only and that another cable is required for audio. Can I assume that plugging in either or both of the other connections (a USB and a FireWire) coming out of the 20" display will take care of audio?
    That leads to another answer, but I'm confident that I'm almost there thanks to your help. Close enough to mark this as "solved". Thank you! Let me know if you have any further thoughts with regard to the audio though.

  • WHAT IS THE LARGEST HDD I CAN USE ON A LENOVO 3000 C200 8922AZG

    Can anyone tell me if I can use a hard drive larger than a 120 size on the 3000 C200 laptop?   SATA OR SATA2?
    Thanks for your response.
    Michael
    Solved!
    Go to Solution.

    Thanks a lot!!!
    and what about cpu ?

  • What is the max hdd that i can put into a tx1000

    i'm currently running a 250gb hdd w/ 3gb ram

    Could you please post complete product/model number of your Notebook? You can use link below to find this info
    http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=&docname=c00033108&lc...
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • What is the best mail server software, compatible with G5 and OS X 10.5.8?

    Hello.
    I want to install/set up a mailserver on Mac OS X 10.5.8.
    It will host approximately 35users, should have pop, imap, spam protection, webmail/admin interface, routing feature, all the usual stuff, I'm doing this because we often have to recieve very large files and having a mailserver on local network makes working with them so much faster. What would you recommend?
    Thanks in advance.

    There isn't enough data in your post to create an informed answer.
    For one, are you talking Mac OS X client, or Server?
    Mac OS X Server already includes all the various mail server components you talk about, and it's based on Postfix, one of the most popular open source mail servers around.
    Secondly, having your own mail server will only be 'so much faster' for local users sending/receiving local mail (i.e. from users on the same network). Every other email has to go out (or come in) over your office internet connection and having your own mail server doesn't change that one bit.
    At that point, if you're only talking local users, it sounds like what you want is a file server, not a mail server. Mail is not designed for large file transfers.
    Third, even if you don't want Mac OS X Server's solution, and you can deal with the bandwidth, you haven't mentioned cost - what's your budget here. You won't find a free/open source solution that's more complete and easier to use than Apple's bundle, so now you're into the commerical offerings. All of them charge, typically per user and some of them (as already mentioned) are mothballing their PPC support, meaning any invenstment in their option might be short-lived.
    So I think you need to better state your goals and ideals before you can find the 'best' solution (if any of them are really 'better' than any other).

  • What is the latest version of Firefox compatible with a MacBook Pro with 2.33 GHz Intel Core 2 Duo running OSX 10.5.8?

    I keep getting told my browser needs updating and it doesn't work right on some websites. I have had unhappy experiences in the past trying to update Apple OS and Firefox due to compatibility issues. I suppose I could switch to Safari but I have been using Firefox for many years and would prefer to stick with what I know.

    Firefox 16.0.2 was the last to work on the old Mac OSX 10.5.x as Firefox 17.0 to current has required OSX 10.6+
    https://www.mozilla.org/en-US/firefox/16.0/system-requirements/
    https://www.mozilla.org/en-US/firefox/17.0/system-requirements/

Maybe you are looking for

  • F-90 TAX (Posting is only possible with a zero balance;correct document )

    WHEN I AM POSITNG THE DOCUMENT THROUGH F-90 I AM GETTING THE FOLLOWING ERROR ERROR:Posting is only possible with a zero balance; correct document     Message no. F5060 ACTUALY I HAVE SLECTED VENDOR 31 ASSET 70 WITH TAX CODE AFTER SIMULATING THE DOCUM

  • How to use an image as button?

    I want to set an image as the background of a frame, and also want use four regions of the image as four buttons. How?

  • Universal worklist- search people

    Hi, I need inputs/suggestions regarding UWL people picker enhancements Currently we are on EP 7.02 SP 7 version, and planning to upgrade to support pack 12. So we saw a wiki on UWL people picker enhancements on Sp12. http://wiki.scn.sap.com/wiki/disp

  • Boot camp windows vista

    does anyone know if windows vista will run off of boot camp?

  • Bridge CC にて.ツールのPSccでバッジを当てたいのですが

    Bridge CC にて.ツールのPSccでバッジを当てたいのですが.先日PS2014をインストールしたところバッチを当てる際にPS2014が起動してしまいます. ファイルタイプの関連付けは.すべてPSccにしてあります. スタートアップスクリプトは.PSccにチェック有り.PS2014はチェック無し. Bridge のウィンドウからは.PSccにてファイルを開けるのですが.バッジの設定はできるのでしょうか? よろしくお願いします. 使用環境:Mac os 10.9.5