What is the last OS which would convert cwk files to AppleWorks?

I'm still trying to convert some old ClarisWorks documents. Presently working with iMac 27" (intel) OS 10.9.2, Mavericks, but I am unable to open these old WP documents.

Word Processing documents can be opened directly in Pages 4 (AppleWorks 6 only) but this is no longer available - the newPages 5 (Mavericks required) does not open AppleWorks documents. Panergy Software's docXConverter v3.2 ($19.95) can convert Appleworks 5 and 6 Word Processing documents to RTF (though it has been reported that it can only handle documents which contain only text, not those which include images or frames). The latest version of the free LibreOffice has announced that it can open AppleWorks 6 Word Processing documents and an ability to open ClarisWorks documents has been reported: it does appear to be able to handle at least some embedded images.
If you have upgraded to Lion/Mountain Lion/Mavericks and have AppleWorks documents you cannot open, then you should be able to install Snow Leopard on an external hard disk and start from that (provided that the Mac did not come with anything higher than Snow Leopard originally installed); and success has been reported in running Snow Leopard Server under emulation in Parallels - the method is described here: Snow Leopard Server is available in the Apple Store (by telephone) at a reduced price (at the time of writing) and is preferable to using ordinary Snow Leopard which is quite tricky. I haven't tried this myself: use at your own discretion. You can then run AppleWorks as an emergency measure.

Similar Messages

What is the best software/plugin for converting Quark files to Indesign?

What is the best software/plugin for converting Quark files to Indesign?
I don't want to upgrade to the latest Quark now i've got CC so going to make the leap to indesign only. Does Indesign auto convert or do I need anything else?

ID does not load QXD files. There is a respective commercial third-party plug-in to that effect, but it's rather pricey and I'm not up to speed which versions of Quark and ID it supports and which features come over. Inquire in the ID forum.
Mylenium

I operate a windows 8, 62 bit computer. I have ordered and downloaded the following product for AU$129 Adobe Photoshop Elements 13 (Windows,English) on the understanding that it would convert PD files to word. It is not doing so. Is this a wrong order?

I operate a windows 8, 62 bit computer. I have ordered and downloaded the following product for AU$129 Adobe Photoshop Elements 13 (Windows,English) on the understanding that it would convert PD files to word. It is not doing so. Is this a wrong order?

if you're trying to convert pdf files to word files, you want acrobat pro or acrobat standard, Buying guide | Adobe Acrobat XI Standard
http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

What is the Transaction/Program which gets triggered when file

What is the Transaction or Program which gets triggered when file has been placed on application server to generate the Inbound IDoc from the same.
Please let me know the procedure to automate the process of generating Inbound IDoc when the file has been placed in application server path...
Thanks for your reply ....
regards,
G.Reddy

hi
MASTER_IDOC_DISTRIBUTE fm is used to create a IDOC for outbound & for inbound
try this
you can use master_ale_distribute function module to create the idoc.but before that you need to populate two internal table to pass in to this function module.
1.it_edidc = this internal table tells the port,partner profile etc.this internal table having the same structure of edidc table
2,second you create the internal table conatains the data records.this table got the the structure of edid4.
3.populate these two internal table and pass this to this function module
4.you can populate the second internal table from your flat file by writing some upload program
FORM master_ale_distribute .
*PERFORM get_mestype.
wa_edidc-mestyp = wrk_mestyp.
wa_edidc-idoctp = wrk_idoctyp.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
    master_idoc_control                  = wa_edidc
OBJ_TYPE                             = ''
CHNUM                                = ''
TABLES
    communication_idoc_control           = it_edidc
    master_idoc_data                     = it_idoc_data.
IF sy-subrc 0.
ELSE.
    READ TABLE it_edidc INTO wa_edidc INDEX 1.
    IF sy-subrc = 0.
      MESSAGE s006(msg) WITH wa_edidc-docnum.
      PERFORM modify_idocnum.
    ENDIF.
ENDIF.
ENDFORM.
Regards

I have a website for my artwork. I had a PC and. Now an iMAC. I've used Dreamweaver to update the website. I used to go to Filezilla on the PC a upload the updated pages which would then show updated on the internet. What file like FileZilla should I

I have a website for my artwork. I had a PC and. Now an iMAC. I've used Dreamweaver to update the website. I used to go to Filezilla on the PC a upload the updated pages which would then show updated on the internet. What file like FileZilla should I use?

You can download it here:
https://filezilla-project.org/download.php?show_all=1
Click the Source Forge link - make sure you reject offers for any other software during the installation, Source Forge usually will ask you to install other stuff in addition to what you want (Filezilla).
It works well on Mac.
Dreamweaver also has built-in FTP functionality if you want to check that out.

I have a Apple MacBook Pro "Core i7" 2.8 13" Late 2011. i want to upgrade its RAM from 4GB to 16GB. But OWC sells two kinds of RAM, the DDR3 and the DDR3L.What is the different and which one would work better for my mac. Thanks!!!

Please help! I have a Apple MacBook Pro "Core i7" 2.8 13" Late 2011. i want to upgrade its RAM from 4GB to 16GB. But OWC sells two kinds of RAM, the DDR3 and the DDR3L.What is the different and which one would work better for my mac. Thanks!!!

I don't see any DDR3L on the page for the RAM that would fit your model -> http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_133 3MHz_SDRAM.
But the answer is that it doesn't really matter - just make certain to get 1333MHz.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS X 10.??, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

What is the last root task of an ora install

Hello
I installed the db 11r2 on a redhat box and the ssh/xming failed just as the installer was about to run the final root task.
I'd rather not trash the install and run the task manually. Any way to find out what script that last root task would be? There are loads of .sh files and no clue in the installer log.
Thanks
Kevin

At the end of the installation root.sh is executed and that can be found under $ORACLE_HOME. You can re-run it and that should give a clue which steps fails.

What is the last version of the Apple OS that supports Eudora and Quake III? (I'm at 10.4.11)

Hi There,
I am having vertical line issues with my G4 PowerMac Quicksilver (April 2002).. Red or purple lines and sometimes they connect to the pointer arrow.
I thought it was the graphics card but when I ran the Apple Hardware Test Disk version 1.2.5 it failed at the Logic board, although it's an after market Logic board because one of my (2) 1 gig processors died a few years back so I don't know if the hardware test disk is still valid with an after market Logic board?
Also What is the last version of the Apple OS that supports Eudora 6.2.4 and Quake III? (I'm at 10.4.11)
Thanks for any and all help, I think my time is limited in my old Mac..
Eric

Hi-
I'd strongly recommend replacing the thermal compound on the Radeon 9800 Pro. It could very easily be a simple matter of lack of cooling which is causing your issue.
I have a tutorial here:
C874D84E-96DD-4DFF-9566-7C66BE065BB5.html
16196A0F-952B-47ED-A9F9-91F7B0ECA431.html
Use Arctic cooling MX-4 compound.
As for drivers or ROM updates, if the card is a flashed one, don't bother with the firmware. All ROMs are the latest firmware.
In Tiger, there is a retail driver update that you can try:
http://support.amd.com/us/gpudownload/Pages/jan2005updater.aspx
No updates needed for Leopard.
Eudora should be fine:
http://lowendmac.com/misc/10mr/mb0910.html#1
Quake is fine. This coincides with my observations:
http://www.insidemacgames.com/forum/index.php?showtopic=31884

WHAT ARE THE FORMS (SCRIPTS) WHICH ARE NOT PROVIDED BY STANDARD SAP?

WHAT ARE THE FORMS (SCRIPTS) WHICH ARE NOT PROVIDED BY STANDARD SAP?

Hi Pravin
For a beginner in CRM - Sales would be a right choice to understand how CRM behaves when integrated with backend R/3.
Still as far as CRM goes, most of the components are not exposed to their fullest potential and that is why its not outshining the competitors in market.

What was the last firmware version for the Zen Micro before M

I would like to know what was the last firmware version for the Zen Micro before the MTP firmware?
Please make sure you are 00% on this.
Thankyou.

I think it does, but I'm not sure; since I wanted MTP, I only used .x firmware long enough to save the original Creative test files (with MediaSource, not ZMME) before upgrading to 2.x. And yes, I had to li've with 2..02's shorter battery life until 2.20.05 came out.
May I ask why you want to go back to .x firmware? The only thing that will get you is the ability to use it with Win98SE/2000/Me--but only if you can install Creative drivers on every PC you use it with. MTP requires WinXP SP or 2 and WMP 0, but doesn't need any Creative software at all to work. (Microsoft has made an MTP driver for Win98SE/2000/Me, but it requires customization and may not be supported by other software. I'm tinkering a bit with the customization part right now.)
There are other pitfalls in changing Micro firmware families, in either direction--you'll lose all the files on your Micro, you'll have to install a different ZMME (and I've heard non-MTP ZMME isn't quite as full-featured as MTP ZMME), and you'll need a new plug-in for MediaSource to work.

What is the last version of NUServer64.

What is the last version of

Hi-
I'd strongly recommend replacing the thermal compound on the Radeon 9800 Pro. It could very easily be a simple matter of lack of cooling which is causing your issue.
I have a tutorial here:
C874D84E-96DD-4DFF-9566-7C66BE065BB5.html
16196A0F-952B-47ED-A9F9-91F7B0ECA431.html
Use Arctic cooling MX-4 compound.
As for drivers or ROM updates, if the card is a flashed one, don't bother with the firmware. All ROMs are the latest firmware.
In Tiger, there is a retail driver update that you can try:
http://support.amd.com/us/gpudownload/Pages/jan2005updater.aspx
No updates needed for Leopard.
Eudora should be fine:
http://lowendmac.com/misc/10mr/mb0910.html#1
Quake is fine. This coincides with my observations:
http://www.insidemacgames.com/forum/index.php?showtopic=31884

What are the modules in which we can create a party site?

Hi Gurus,
I would like to know, what are the modules from which we can create a party site.
Please repond.
Thanks,
Venkatesh

Hi,
There can be numerous modules which create party sites , Leads/Quotes/Order/Recievable/HR/IB/ISupport etc.
Actual number of modules depend on the kind of implementation.
Run this query in your Oracle instance , to get an idea of various modules which has created Party sites in your system.
SELECT meaning,
description
FROM fnd_lookup_values
WHERE lookup_type = 'HZ_CREATED_BY_MODULES'
AND lookup_code IN (SELECT DISTINCT created_by_module
FROM hz_party_sites)
-Idris

I just purchased a new MacPro to replace my existing 2006 MacPro which cannot be undated with the new operating system. My question is what is the safest way to transfer all my files. 1) simply install my existing 2TB HD into the new Mac Pro or 2)

I just purchased a new MacPro 3.2GHz Quad-Core Intel Xeon processor to replace my existing 2006 MacPro 2 x 2.66 GHz Dual-Core Intel Xeon because it cannot be undated with the new Lion operating system.
My question is what is the safest way to transfer all my files to the new computer. 1) simply install my existing 2TB HD into the new Mac Pro, set it as the startup drive, and update its10.7 operating system or 2) or use the migration program.
I'm concerned that simply installing the existing 2TB HD, I may have issues with it not recognising some infromation written for the old 2 x 2.66 GHz Dual-Core Intel Xeon.

your new system runs 10.6.8 just fine as has been said and stated many times.
I would clone it first.
I would even clone the original system it has.
And if you have or want to use Lion and then Mountain Lion, fine - I would still keep backups of every OS.
I am not a fan of putting the OS and Apps plus all the data all on one drive. I like to keep them separate.
Whatever OS, rerun the last combo update is all and any other updates.
And by "new Lion" I assume you don't mean 10.7 but "Moutain" 10.8. Part of me says keep Lion and SL around, and test and try out ML with your apps and other hardware you may have. After too many years, waiting for 10.8.1 - and give everyone time to update their apps and retest.

What was the last version of CS to include webpage creation as part of Automate?

The header says it all: What was the last version of CS to include the creation of web pages as part of Automate in the File dropdown?? I've tried to re-install the original CS on a separate machine, which fails, since it does not make nice with my current version, and the Adobe folks are ABOLUTELY NO HELP since it's too old!
Suggestions welcome.
Brian McNeill

The only thing i can think is your either referring to Automate>Web Photo Gallery or perhaps ImageReady.
As far as windows goes many people have photoshop cs running on windows 7.

What is the last generation of TC

what is the last generation of TC

Officially, Apple stopped using the Generation naming on the 4th Generation 802.11n Time Capsule, which was discontinued in June 2013, when the new 802.11ac version was introduced.
A number of users call the current model a 5th Generation version, but Apple does not. Officially, Apple calls the current version an AirPort Time Capsule 802.11ac

What is the last OS which would convert cwk files to AppleWorks?

Similar Messages

Maybe you are looking for