What is the latest OS that I can use on my 2006 MacBook?

I have a 2006 MacBook 5.1
I recently purchased and upgraded my computer with Snow Leopard. I want to know how high I can upgrade on this specific MacBook.
I also used Adobe CS5 and was curious if any higher update would affect that program
Last question, do I have to pay for the additional updates?
I could've sworn that Apple told me that once I upgraded to Snow Leopard I could upgrade straight to the latest OS with no additional cost.
If anyone could help me out I would really appreciate it.

If it’s a MacBook5,1, it’s a 2008 MacBook, not a 2006 one, and can run Yosemite.
If it’s actually a 2006 MacBook, its maximum OS is 10.6.8(for Core Duo models) or 10.7.5(for Core 2 Duo ones.)
(120318)

Similar Messages

  • What is the latest ios that I can use on my G1ipad and how can I get it installed?

    I own the original iPad and want to update the softwAre as far as I can on this device.  Can I use 4.0?  Can I go further than that?  How do I buy the software download?   Thank you, anyone.

    I use my iPad in Bangladesh. my iOS is 3.2.2. I tried to download and install the latest one several times. but every time near the end of the download a message appears as " an error occured during installation. internet connection timed  out" and the process terminates and restarts again from the begaining. download speed of the connection is around 128MBps.last time it was only a few kilobytes left when the termination occured. can any body please suggest a solution of this problem. it will be a great help.

  • HT1338 I have a Mac Pro Dual Core, 3 Ghz, that I purchased in the Spring of 2007.  What is the latest OS that i can upgrade to?  And is that OS compatible with Logic 10?

    I have a Mac Pro Dual Core, 3 Ghz, that I purchased in the Spring of 2007.  What is the latest OS that i can upgrade to?  And is that OS compatible with Logic 10?

    Logic Pro 10 requires OSX 10.8.4, which is not officially supported on your Mac Pro (must be Early 2008).
    There are, however, unofficial workarounds to install 10.8 on those older models that you can search for on Google.

  • HT4972 What is the latest iOS that you can run on an iPhone 3G?

    What is the latest version of IOS that you can run on a IPhone 3G??

    Welcome to the Apple Support Communities
    The most recent version for the iPhone 3G is iOS 4.2.1

  • What's the latest Mac OS I can use with my older G4 Mac?

    Hi Everyone,
    My oldest Mac, a G4 running at 350 gHz, still has OS 9.2 and I'd like to upgrade the OS to the best version the Mac can handle. I tried calling the Apple CAre hotline and a kind AppleCare specialist asked for my old Mac's serial number, and said I could install OS 10.4.
    Well, a good friend of mine happened to have Mac OS 10.4.7, but it won't install. It starts, but goes into basic and states it's hanging.
    Apparently, 10.4 is too advanced or, did I do something wrong?
    Where on the Apple website can I find which OS would work best on my older Mac?
    Thanks.

    If that computer has never had an OS X newer than OS X 10.1 installed in it,
    you probably should check the Firmware (boot ROM) version noted in the
    OS 9.2 running system's "System Profiler" to see what the firmware version is.
    And then see if the computer needs to have the Firmware Update applied
    before attempting to install an OS X version into the computer. It will need to
    have a running OS 9.1/9.2 kind of system booting the computer in order to be
    able to install a Firmware Update.
    Lack of the proper firmware update can compromise the computer's hardware.
    • Available Firmware Updates - Mac OS X:
    http://support.apple.com/kb/ht1395
    The installation instructions are should be carefully read & understood.
    Also, in older iMacs and other early PPC Macs, you have to be sure the
    computer's hard disk drive size capacity is correct, if upgraded to a larger
    capacity hard drive; some old models need to have a small (8GB) partition
    for the OS installation. Later ones don't require this, but may have a limit
    on the total capacity of a drive used in certain older computers.
    For general specifications on several different Apple hardware (and OS)
    products, you could download a fairly good database of information from:
    • MacTracker:
    http://mactracker.ca
    To see about purchasing an OS X 10.4 full install disc (aka retail) you could
    check the auction sites or local Mac user groups, craigslist ads, and other
    local dives or recycling centers; or try calling the main Apple sales support
    number as shown in the Apple web site, 1-800-MY-APPLE and ask to speak
    to a product specialist for Mac OS X 10.5 Leopard, if the person you talk to
    does not appear to know about the older no longer listed Leopard install discs.
    Be prepared to purchase when you call; the phone number is not a retail store.
    (You may have to pay significantly more than their asking price for questionable
    goods through some auction; and some web resellers of discs sometimes sell
    the incorrect discs, in an auction sale, for more than the cost direct from Apple.)
    Hopefully you aren't planning on a modern experience in that old a Mac.
    Good luck & happy computing!

  • What are the AME Tables that I can use to get approvers list

    Hi
    Please provide me any information about the tables by which I can get approvers list.
    Thanks
    Amit

    Tthe application communicates with AME when a transaction is initiated in the application, and then each time an approver responds to the application‟s request for approval of the transaction, until all approvers have approved the transaction. AME records each approval, and recalculates the approver list for a transaction each time an approver responds to a request for approval of the transaction.] As far as AME is concerned it calculates approver list at runtime .
    "The application(Purchasing , AP etc) communicates with AME when a transaction is initiated in the application, and then each time an approver responds to the application‟s request for approval of the transaction, until all approvers have approved the transaction. AME records each approval, and recalculates the approver list for a transaction each time an approver responds to a request for approval of the transaction.
    For details check following link ( see what happens at run time section)
    Let me know what exactly you are looking for ?
    -Ashis
    Edited by: aprak on Aug 28, 2012 11:30 AM

  • What is the latest version where you can use replace tabs?

    I will only use a firefox version that has a replacetabs add-on option - which is the most updated version that can utilize this function?

    What do you mean with replace tabs option?
    Do you want to open links in the current tab instead of in a new tab or window?
    You can look at these extensions:
    *Tabberwocky: https://addons.mozilla.org/firefox/addon/14439
    *Tab Utilities Lite: https://addons.mozilla.org/firefox/addon/62581
    *Tab Utilities: https://addons.mozilla.org/firefox/addon/59961

  • HT201364 What's the latest OS that I could have in my MacBook Air from 2006?

    So OK, I can't get the OS X Mavericks in my MacBook Air because Im afraid its too old (around 2006-7)
    But what's the latest OS that I could use? I already have Mac OS X Lion 10.7.5, is there something else besides Lion I could try? newest?
    Greetings from Colombia, South America

    No.
    http://support.apple.com/kb/HT5444?viewlocale=en_US&locale=en_US

  • Which is the latest OS x i can use ?

    I have PowerBook G4 1,5GHz 768 MB RAM  15 inch,what is the latest OS X i can use without lag or anything like that?
    Can Leopard run on it ?

    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
    If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    The DVD should look like this
    Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
     Cheers, Tom

  • I have a Power Mac G4 1.25 Ghz 1 GIG Ram, what is the latest OS X I can run?

    I have a Power Mac G4 1.25 Ghz 1 GIG Ram, what is the latest OS X I can run?  I am currently running Jaquar.  Where can you obtain older versions of OS X?

    Actually you can run up to Leopard 10.5. It requires a G4 867mHz processor so you are comforatbly over the minimum specs.
    That said, I offer two caveats regarding Leopard that may make Tiger 10.4 more appealing:
    1) Leopard may want more than 1G RAM. With currently available modules, you can take your Max RAM to 2GB. You can install up to 2GB RAM.
    2) If you don't have a video card that supports Core Image, things can be choppy. My 1.25 G4 is a tad sluggish with Leo because I have the original ATI Radeon 9000 64MB VRAM vid card. If you have a Redeon 9600 or higher, you likely have Core Image Support. Use System Profiler to Identify your exact video card. SP is in Applications > Utilities. Select "Graphics/Displays" from SP's "Contents" pane on the left to view the specs of your card in the main pane. It wil tell you if Core Image is supported.
    If you can get Leo running fine, it's better in that many programs no longer support 10.4.
    Looks like yo uare in the Continental US. Call Apple at 800-MY-APPLE and ask for an operating system specialist. Tell them you need 10.5 to support new hardware. I bought that way in March, and it sounded like they wre going to keep Leo in stock for a whie because of the larger number of olders Macs that can;t run Snow Leopard or Lion.
    Be very, very careful of Mac OS software on auction sites. I've seen too many that were improperly described and would not work. Likewise the gray Leopard install disk that came packed with another Mac model won't work.
    I just checked--OWC does not list any Apple System software at this time.

  • I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

    I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

    The largest capacity HDD that you can install is the HGST 1.5 TB HDD:
    http://eshop.macsales.com/item/HGST/0J28001/
    Any 2.5" 9.5mm thick SATA HDD will fit and operate in your MBP, regardless of capacity.
    Ciao.
    Message was edited by: OGELTHORPE

  • I am looking to get a new 13 inch mac book pro, what is the max RAM that I can install.  I know configured from Apple is 8 GB, but can I put 16 GB after?

    i am looking to get a new 13 inch mac book pro, what is the max RAM that I can install.  I know configured from Apple is 8 GB, but can I put 16 GB after?

    Yes, you can install 16GB in your new macbook pro.
    Go here (OWC) and here (Crucial) to give you options on how much you want to spend.
    Good luck.

  • What is the file size that ODI can handle

    Hi all,
    What is the file size that ODI can handle ?????????
    can it handle 1GB files without any issues?????????
    Thanks
    Phani

    Hi Phani,
    It also depends on the type of file you are transfering. If have used the XML file around 1GB and the performance is very low. But we used the Database schema to load the XML data and the performance had increased very well.
    I never tried the large flat files load around 1GB.
    Thanks,
    Yellanki

  • I have a sequence shot on the 550d/rebel T2i, I converted it to prores 422 and edited in fcp. What is the best export that i can do to preserve quality and prevent pixelation.

    i have a sequence shot on the 550d/rebel T2i, I converted it to prores 422 in MPEG Streamclip and edited in fcp. What is the best export that i can do to preserve quality and prevent pixelation. Rite now, i have been just clicking on the export to quicktime function, but the quality of the footage is completely reduced and colours look desaturated and there is pixellation compared to the original camera footage. Also is there anyway i can render and export the sequence using the original footage (like an online edit or something). Also is there anyway to upgrade the final quality. I have Compressor, Dvd Studio pro, Motion, Color and Cinema tools, i dnt know if they are of any use to me and have no idea how to use hem or what they are for also.

    >What is the best export that i can do to preserve quality and prevent pixelation
    The best way to export is entirely dependent on what you plan to do with the exported video.  For example, if you plan to go to DVD, the export process is different than if you plan for web delivery or for iPhone viewing.  Compressor has presets for most final delivery formats ... start with those.
    >is there anyway i can render and export the sequence using the original footage
    Yes.  In FCP, go to File-Export->QuickTime Movie.  Check the box to make the movie Self-Contained and use Current Settings.  Do NOT "Recompress All Frames."   The resulting self-contained movie will play on any Mac that has the needed audio and video codecs installed.
    >is there anyway to upgrade the final quality
    No and maybe.  While you technically cannot improve quality over the original, you can possibly 'enhance'  the aesthetic quality of the video using various filters in FCP or Color.
    -DH

  • HT1338 My G5 PowerPC still works great, but what is the latest OS that is possible.  I just bought a new HP Printer and it is not compatible with OS 10.4.  Is there any hope?

    My G5 PowerPC still works great, but what is the latest OS that is possible.  I just bought a new HP Printer and it is not compatible with OS 10.4.  Is there any hope?

    A PPC G5 cannot run any version of OS X beyond Leopard 10.5.8.
    You should be able to find a Leopard retail (black) install disk on eBay. A grey update disk is machine specific and won't work.

Maybe you are looking for

  • Workaround to import video in FCP 6.0.5 under Leopard

    On behalf of a FCP user under Leopard with FCP 6.0.5 I would like to ask you how to import video from a Panasonic camcorder using some strange format. The workaround now is to import it on another machine under Snow Leopard with iMovie, export it as

  • Select rows in custom Grid/Matrix form.

    Hi, I am creating custom Form(Screen) with Matrix Control, now i want to select row and on click of OK button , i want to set currency values in Standard Sap :B1 Screen Fields(say Landed Cost) but i am not able to select the rows, Does anybody knows

  • Reuse of context in ACE module

    Hi all, just have a question about som reuse of resources in a ACE module context.  I don't want to make a new context, and can reuse most of the existing configuration in one of my context.  The config is not complex and difficult, but I'm not sure

  • File structure validation in PLSQL

    Hello All, I need few clarification about this if i want to validate the file structure how can i do in plsql, below is the example where my files looks like. IIORRIDGE VA1601800700028120000000008+0000123822092013 VA1601800700029040000000008+00003238

  • Download error: latest update for PPro CC 2014

    Retry does not work. The only message I get is Contact Customer Support. How do I contact customer support?