What is the life expectancy of the hp laser jet p3015 printer?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
Some telltale signs that an AirPort has (or is about to fail):
Status lights are not illuminated or do not match any of the known configurations.
Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
Unit refuses to intialize, even after performing multiple "factory default" resets.
Weak or no wireless signal.
Ethernet port(s) not functioning
Etc.
Also, are there any compatiility issues with newer models and G5/G4s?
Three potential issues:
Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

Similar Messages

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go? Also, are there any compatiility issues with newer models and G5/G4s?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
Some telltale signs that an AirPort has (or is about to fail):
Status lights are not illuminated or do not match any of the known configurations.
Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
Unit refuses to intialize, even after performing multiple "factory default" resets.
Weak or no wireless signal.
Ethernet port(s) not functioning
Etc.
Also, are there any compatiility issues with newer models and G5/G4s?
Three potential issues:
Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

I cannot set the number of copies on my Laser Jet P2015dn printer. It always prints 1 copy.

I have tried to set a different number of copies everywhere I can and it still prints only one.

When we save a document, Pages save infos about the printer used to print it but for an unknown reason, it doesn't select it as the printer to use when we re-open it.
Pages '08 already behaved this way. This was reported to Apple but they don't correct it.
At this time, we have to live with it or leave the app.
You may
Go to "Provide Pages Feedback" in the "Pages" menu, describe what you wish.
Then, cross your fingers, and wait at least for iWork'11 ;-)
I can't guarantee that you will succeed but if you don't ask, for sure you will not.
Yvan KOENIG (VALLAURIS, France) vendredi 27 mai 2011 16:26:36
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

What is the life expectancy of the Bionic?

I'm not really looking for an answer to that question, just pondering! I purchased the Bionic November 2011 and within in the past few weeks I am having hardware problems (along with 4G connectivity). I am very easy on the phone and it is handled with care.The microphone went out and I received my "like new" replacement that came with a long scratch on the screen and the speaker (ear) made an annoying buzzing sound that would not stop!
So, my second "like new" replacement arrived a few days later and...tada...it will not power up! And no it is not just me...the same problem happened at the Verizon store. I will receive my 3rd "like new' replacement within a 2 week span. I am so tired of having to reinstall apps, accounts and the list goes on.
Anyone else having problems?
Despite the lack of love Verizon gives to the Bionic owners, I continue to love my Bionic (when it works)! And hope that I actually receive a "like new" replacement tomorrow. (And I must say that the customer service/tech support on the telephone have been wonderful)
Is my luck really that bad or is the Bionic nearing its last days? We shall see!

I was wondering how long the actual device is made to last...the battery life for me has been about 4 hours for me. My last Droid lasted about a a year and half before the hardware started failing. Years ago phones lasted several years before falling apart. I'm just curious to see if I am the only one with problems or is the Bionic known to have issues. But after receiving all of the replacement phones that are inoperable I'm beginning to think the Bionic is a dyeing breed.
Thanks for the suggestion...I had not thought about contacting Motorola directly. I did receive the 3rd replacement phone and it too is inoperable. The folks in the store had no idea how to get it do anything. All they can do is send me another replacement phone.

What is the life expectancy or photos in an iphoto book

What is the life expectancy of the photos in an i-photo "book"?

How are you going to store them?
Note that we are users just like you - a question like that would be almost impossible for Apple to answer - it certainly is impossible for other users to answer
Hers are teh specs that Apple publishes - http://support.apple.com/kb/HT3412
LN

Any way to measure the life expectancy of a PRAM battery?

Is there any way to measure the life expectancy of the PRAM battery through software? Or must one open the case to determine the left over charge? I have an iMac 5,1 that thus far is doing well. But I am well aware the age suggests the PRAM battery may go soon, and I will have a two week period soon where I won't be accessing it, having to leave it off.

I'd love to know if there is something out there to do this. Just spent a few minutes searching and was only able to find something years out of date for the old 1/2 AA G3 PRAM battery, that only works in OS 9.
The best I've seen is to disable automatic time updating, shut down and unplug for several hours, and see if the clock is still on time when you reconnect to power. This seems very imprecise, to say the least, and you will be draining more power from the battery while it's off wall power.
Of course, you can always take it out and measure it with a volt meter, but it would be insane to go through all that just to measure it and put the same one back.
I think the life expectancy of one of the CR2032s, the lithium button battery which I'm supposing your early Intel, circa 2006, uses is around five years.
If this is your model, replacement doesn't look all that painful. My late 2009 21.5 is a total nightmare with 35 steps. Keeps on going even after the logic board is out. Why Apple puts what should be a user replaceable item in such an inaccessible place -- and getting more inaccessible with each new model -- I have no idea. I guess you're just supposed to throw out the computer when the battery dies.

What is the life expectancy of airport express?, What is the life expectancy of airport express?

What is the life expectancy of an airport express?

My guess.....3-4 years would be about average based on forum experience.
I have one that is 6 years old...been running almost 24/7, and have had one fail that was less than 6 weeks old, so averages won't tell you much since any electronic component can fail at any time.
Is something wrong with your Express?

Whats the life expectancy of an i pad2

whats the life expectancy of an i pad2 ?

You can expect two years, as Apple will sell you a warranty extension (AppleCare) that'll extend the one year warranty to two. :-)
Odds are good it will last quite a while longer, but it's reasonable to expect 2-3 years. My rule of thumb is that by year three I definitely want a newer version even if I don't need it.
And, keep in mind that there is always a robust market for used Apple gear.

I am having difficulty charging my iphone with the cable. Its been 1 yr since I bought the phone. Does the cable becomes useleless after a year. Whats the life span for the cable?

I am having difficulty charging my iphone with the cable. Its been 1 yr since I bought the phone. Does the cable becomes useleless after a year. Whats the life span for the cable? It automatically gets disconnected and then get connected again.

That is shorter than normal. Any signs of wear? And you're sure it's the cable, not one of the pins in the iPhone's charging port?

Default account assignment values during the life time of the session

Hi Experts,
In SRM7.0 default account assignment values in 'Change Personal Default Settings' has to be retained in the life time of the user login.
Eg. A user enters into SRM7.0 web screen(NWBC) and will go to 'Change Personal Default Settings' and enters the values and saves the values and he will do other activities like creating SC and other things, when user logoff from the web screen (NWBC), the values should wipe off and when he logs in again, there shouldnt be any values in account assignment in 'Change Personal Default Settings'.
Thanks
SR

Sam,
our client's requirement is, those values has to be cleared when user logsoff from NWBC portal, when again he logsin, values should be blank and user can enter the values according to his/her requirement.
we tried to capture the action under 'Logoff' button, but, as this button is written in HTML/Java Script, we couldnt able to capture in SRM and I am not Java known person.
thanks
SR

How do I get the driver for an HP 1005 laser jet printer now that I have changed my operating system

how do I get the driver for an HP 1005 laser jet printer now that I have changed my operating system

Did you look on the HP website?
Click the picture to go to the page.

What is the life expectancy of M

My 3 year old MuVo N200 has been experiencing difficulties over the last month or so. Currently, the display screen displays only the Creative logo. I know that there is music loaded on there, but that does not play either. I have already tried replacing batteries. I believe that I have all of the most recent downloads. Could the problems be related to the end of the life of this product?

There is a chance that the hardware has become defecti've, however it is more likely that the firmware in the player has become corrupted. Try reloading the firmware. This might solve the problem. Back up all the files on the player to your pc before reloading the firmware, as reloading the firmware will delete what is in the player's memory. The n200 is listed on Creative's download page as the Muvo Micro.Message Edited by JK23 on 02--200807:36 PM

What to request or expect in the JB?

for me it is a very good progress from sony, still no word on the update time or the included phones - which i hope most of the 2011 xperia - but anyway what to expext on the new update.
for me one thing must be updated is the timescape widget, what i mean if i add two timescape widget they will display the same info. which is better to be possible to choose what ever you like, if it is only facebook or twitter or linkin, or combined both or even all, it is possible in other widgets as contacts to display a specific group in each widget or a combined view.
and another thing is the arabic keyboard which have some mistakes and problems, such as choosing the hidden letters or whatever they are called.
a massages widget wich show all masages as conversations (inbox and sent grouped by contact).
and also the sleep function in the walkman which i have repeated for the fourth time now.
and finaly some motion function such as flip to mute or double taps.
what about you people any other thoughts??
and do you thing we are requesting the impossible??
thank you sony and people.

Thank you for your input I will pass it on.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

What answer is "status" expecting in the Game Center set up process?

I am trying to set up Game Center on my iPad 2. After a lot of hassle I eventually had a nickname accepted but now I have to fill in a space referred to as "status" - what type of entry is required?

I don't use Game Centre, but the iPad manual says :
The text field in the center of the screen lets you enter your current status message. Your status appears along with your nickname in other players’ Friends screens.
So it looks like you can enter whatever you want your friends to see.

HP Laser Jet 1020 printing again the last job

Hello there!
I have a printer HPLaser Jet 1020 which, after reboot, of the computer when switching ON the printer, it immediately begins printing the last job that was sent to the printer before the computer had been switched OFF.
I have checked the printing queue before turning OFF the computer and it is empty.
This problem does not happen every reboot, but happens very often and I haven't been able to find the pattern, nor the cause. I've tried it in two different computers and the same problem occurrs. Has anybody else had the same problem?
By the way, I have Windows XP in both computers and the drivers have been downloaded from the HP web-site.
Thanks!

Hi, have you tried to disable bidirectional support'?
Devices/Printer > right click your HP printer icon > Printer Properties > Ports > uncheck 'enable bidirectional support > APPLY
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

What is the life expectancy of the hp laser jet p3015 printer?

Similar Messages

Maybe you are looking for