What is the limitation for no of systems in communication

Hi All,
I have a sudden change in my business requirement; here I need all you help in analyzing the feasible solution for the below business.
Presently we are integrating between SAP-IS Retail to POS (third part system) using IDOC and file interfaces. We have good amount of outbound and inbound scenarios between SAP to POS system. So here everything looks quite good and simple as we will be communicating to POS central system, and these POS central system will take care of communicating with diff stores (approx 3000) of this retail business.
And the new business requirement is to communicate at store level. XI has to communicate each and every store. So we are erasing the POS central system and trying to reach each store and communicate vice versa.
Here I need your valuable suggestions and feasibility for the above business.
Thanks,
Vijay Naredla.

Hi Vijay
In case when you need to connect directly with stores rather then some central destination than File target location will be different for each store.
One simple way which comes into the mind is to create as many File Adapters as many stores we have but that is not easy to support ( as you have 3000 stores ) & not good programming practice.
So I have following solution in mind -->
Assign some Key Value to all the stores then using Adapter specific message attributes of File adapter, once can change the value of " Target Directory " on the basis of Store Key value while Message Mapping.
This will result in lengthy program but atleast easy to manage as you just need to insert/update couple of lines in case new store comes up.
Think about it & let me know
- lalit -

Similar Messages

HT4759 what are the limitations for PC users using iCloud?

I am considering iCloud for storing music, photos etc. Are there any significant limitations for PC users? Our family employs a mix of Apple and PC devices.

Of course, iCloud does a better job on Apple devices like iPhone, iPad and Mac, because it seamlessly works with the pre-installed apps like Mail, Contacts, Calendars, Reminders, Notes etc., but you could also use some of the features on a PC. This guide shows you, how you could set up iCloud on a PC: http://www.apple.com/icloud/setup/pc.html
On a PC you sync iCloud Mail, Contacts, Calendars, and Tasks via Outlook, snyc Bookmarks and Photos.
Some other Services like iWork apps (Numbers, Pages and Keynote) or Find My iPhone are missing, but accessible through the website www.icloud.com (new Chrome or Firefox needed)
By the way, iTunes is still needed for managing your music library.

What is the limitations of J2EE as a distributed system

Merry Christmas!!!
What is the limitations of J2EE as a distributed system
For example,
Once we use J2ee as a solution to the E-commerce,
What is the limitations of J2EE compared with .NET?

imagination

What is the process for connecting ethernet. Have ethernet cable connected to stereo received for internet radio and Blue Ray. However Network System Preferences indicates ethernet not connected and has red dot to left. Note Airport wireless is working.

What is the process for connecting airport extreme ethernet? I have ethernet cables connected to stereo receiver for internet radio and another to blue ray player. The system preference network indicates "ethernet not connected" with red dot to left of this message. The airport wireless works and has green dot to left of it. The stereo receiver and blue ray player do not respond and give message not connect to internet. Thank you. / cfpirate

It worked for me finally. I took out the DNS numbers in airport admin utility, and restarted the airport express. I do not remember putting the DNS numbers in, I wonder from where the airport express got those numbers.
After restarting, it worked.
Thanks!

What is the password for predefined SYSTEM account

Hi ,
i am trying to use predifined account called as 'SYSTEM' to assign priviliges to a user .
But i am unable to login into SYSTEM account .
please tell me what is the password for this SYSTEM account . . Thanks

If anybody has forgotten their SYSTEM account , do this way
Start SQL*Plus (Start -> Programs -> Oracle – Instance Name -> Application Development -> SQL Plus).
At the login prompt, in the user-name field, type ”/as sysdba” (including the forward slash, but without the quotes). Click OK.
You are now connected as system with full DBA rights.
To reset the password of the SYSTEM password (or any other user password), run the following query:
alter user system identified by NewPasswordHere;
Keep helping others .

What is the limitations of an Openhub

Hi
When we use openhub what is the limitations.
Is there any limitations of an Openhib
shankar

Hi BI,
The Open Hub service enables you to distribute data from an SAP BW system into external data marts, analytical applications, and other applications. With this, you can ensure controlled distribution using several systems. The central object for the export of data is the InfoSpoke. Using this, you can define the object from which the data comes and into which target it is transferred.
No real technical limitation if you are looking for bulk transfers
You may have to manipulate a datamodel to suit the scenario as the OLAP processor is not used
SO if you have complex requirements you may have to create a query to APD into a DSO then open hib from there
And naturally if APD starts to have memory problems then you use the infoprovider read function module to do have an ABAP to read data then into a DSO and open hub out
I dont really use open hub off standard cubes as there is always a OLAP requirement in the extraction fo data
Naturally if you require just to dump raw data out then you could open hub of the cubes - but in that instance your global IT architects may ask why you are dumping data to a third party tool where they could come in on OLAP BAPIs etc at run time to access BW ie extra front ends
The functionality will work with extraction to a database table.
In BW 3.5:
The assignment of Open Hub Destination and InfoSpoke is an one to one relationship. One InfoSpoke
should not be used in more then one process chain. For the extraction, the database table must
contain the technical key. This option must be set.
An InfoSpoke should be a used at most in one process chain.
In NW2004s:
It is possible to assign one Open Hub Destionation to more then one DTP.
One DTP can be a process step of more then one process chain.
In the runtime only one request can be loaded into the Open Hub Destination. The next load can
started, if the status of this request is set to u2018Greenu2019.by the 3rd party application.

What r the limitations of ST01

hi guys
what r the limitations of ST01?
thank u

Hi Sunny,
ST01 is used as Authorization Trace. Authorization Object S_ADMI_FCD gives access to the trace function
You can analyze authorizations as follows: Choose Tools -> Administration -> Monitor -> Traces -> SAP System Trace or Transaction ST01.
Choose trace component Authorization check and pushbutton Trace on. The trace is automatically written to the hard disk.
To limit the trace function to your own sessions, choose Edit -> Filter -> Shared. Enter your user ID in field Trace for user only in the displayed dialog box.
Once the analysis is completed, choose Trace off.
To display the results of the analysis, choose Goto -> Files/Analysis or the pushbutton File listSelect the required file and choose Analyze.
The results of the authorization check are displayed in the following format: <Authorization object>:<Field>=<Tested value>
The return code shows whether or not the authorization code was successful.
ST01 Return Code 0 -
Authorization check passed
1 -
No Authorization
2 -
Too many parameters for authorization check
3 -
Object not contained in user buffer
4 -
No profile contained in user buffer
6 -
Authorization check incorrect
7,8,9 -
Invalid user buffer
Hope it helps.
Please awatd points if it is useful.
Thanks & Regards,
Santosh

What is the APEX for?

Hello, everyone.
Here is a question - What is the APEX for? Can it be usable for production? For a pro?
I create an application, but I know nothing about HTML, javascript and other site-made-stuff. But my application is working pretty well. And it scares me. Can I put it in open-WEB? How about security? Strong to hackers? Does it safe enough?
Is anybody using APEX for a PRO? Only APEX, I mean.. Or it's only for home-fun-with-my-database?
Thanks for answers..

Hi there
Short & Sweet answers
A.What is the APEX for?
Oracle Application Express (Oracle APEX), formerly called HTML DB, is a rapid web application development tool for the Oracle database. Using only a web browser and limited programming experience, you can develop and deploy professional applications that are both fast and secure.
B.Can it be usable for production? For a pro?
Yes
C.I create an application, but I know nothing about HTML, javascript and other site-made-stuff.
You can learn ...steep learning curve initially...
D.Can I put it in open-WEB?
Depends...
How about security?
http://download.oracle.com/docs/cd/B25329_01/doc/appdev.102/b25309/sec.htm
Strong to hackers? Does it safe enough?
No system is perfect !
E.
Is anybody using APEX for a PRO? Only APEX, I mean..
Or it's only for home-fun-with-my-database?
Yes
No
Thanks for answers..

What is the cause for the mac to become slow

what is the cause for the mac to become slow?

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion/Mountain Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

What are the limits of using windows internal database in RMS?

hi,
We dont have SQL server to use and opting to use windows internal database
What are the limits of using windows internal database in RMS?
tnx

Hi,
the main limitation is that you cannot access a SQL express from remote (even there are tricks to work around that), so you cannot add another machine to the RMS cluster.
Microsoft's recommendation for production systems is to use a full SQL server, what allows you clustering and running all sorts of maintenance tasks.
Other than that SQL Express has a 10GB total limitation for all databases running on that server.
See also http://technet.microsoft.com/en-us/library/dd772673(v=WS.10).aspx for RMS hardware and software requirements.
Hope that helps,
Lutz

What is the Tcodes for Uploading of data using BDC & CATT

PP members:
I was going through the cutover activities , and what I understood is we transfer all the legacy system data into SAP before going live
The data upload follows certain steps (depends on the organizational design load strategies)
First we upload all the master data ( material master, BOM, W/C's & Routings)
Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as materials of the previous stage and necessary adjustments shall be made after cutover day
At this point, I could not able to understand what does the author mean materials of the previous stage
Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
Is it a must to use only LSMW tool to upload master data or any other upload tools are fine
Lastly,. I am not sure about the Tcode of CATT & BDC
Summary of the questions:
1.What does the author mean material of previous stage, for WIP materials during cutover activities
2. Is it mandatory to use only LSMW tool for uploading for master data
3. What are the Tcodes for upload tools CATT & BDC ?
Thanks for your time
Suren R

Dear,
1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM.

As of yesterday, calendar subscribers are no longer getting event alerts. We are not exceeding the limits for number of calendars

As of yesterday, calendar subscribers are no longer getting event alerts. We are not exceeding the limits for number of calendars, and have not installed new hardware or software. What else could be causing this, and how do I fix it? This is critical!

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the announcements for renting VPS?

What are the announcements for renting VPS? For details, understand VPS and make the choice of rental; for Taiwan VPS and Hong Kong VPS, without records, unlimited contents, wider range, and more efficient experience. Your server will show its excellence with the advantages.
Most station agents become less inclined to virtual hosting, for national space, domain name records are needed, which waste the time; for overseas hosting such as Korea hosting, US hosting, no records, but slower speed than national space; therefore, more and more station agents prefer servers, but because the price of servers are too high, they turn their focus on VPS.
The following are the announcements:
1.Open remote desktop lander:
Start-run-mstsc or start-procedure-nearby-remote desktop connect
2.Several conditions for account halt:
First, client side login cause account halt
Second, certain account quits the remote control in midway when it runs routine
Third, certain routine is restricted by synchronous operation of system administrator.
3. Not install the third party firewall
If you need firewall, please use windows firewall, the third party firewall in VPS will cause system collapse and data loss, the system automatically obtains the newest windows patches and install itself, which do not require human operation. Installing system patches in VPS sometimes will heavily lead to VPS collapse and data loss.
Do not modify remote desktop port.
Because of the specialty of VPS system, default remote desktop port is 3389, do not modify randomly, or the remote connection will be out of work.
4. Except some special conditions that user registration is needed for certain procedure, when the remote connection has been close down, do not forget logout user to save memory resource, and prevent the loading connection next time, if it happens, reboot VPS.
5. VPS has been set with relative security when it was paid, with high security. It suggests that do not open firewall randomly, if you open it by your own, the following ports should be opened: 21(FTP), 3389(remote connection), 80(website http), 3306(MySQL), 1433(SQL Server). Timely check whether there is suspicious account or system log, download 360 safety guard to avoid these files and process.
6. Try not to modify registry hand-actuated, ensure the reboot of VPS. Modify remote ports please add the modified port in firewall first, and then reboot.
7.Modify IIS installation files, backup these files, and then modify them with the software that can keep the file layout, prevent these files from destroying IIS.
8.Website service of VPS and FTP service of IIS are default to open hand-actuated, set Web Publishing Service as automatically if you are station agent. If you often use FTP service of IIS, please set FTP Publishing Service as automatically, i.e. reboot it automatically. If you use serv-u, tick all the system service terms. In the terms of security and resource consumption , it suggests that those users who seldom use FTP do not set it as automatically.

Hi there
"So for ALL the apps, the annual monthly fee is £46.88, but you can rent occasionally for £70.32 pm.... ?" Correct
£17.58 single app plan requires an annual commit - it's £27.34 for the month-to-month plan without annual commit.
Thanks
Bev

What are the limitation of the 4 Port Gigabit ethernet Security Service Module (4GE SSM)?

I was wondering if anyone can help me out. I am trying to create a redundancy topology which require several connections to an ASA 5510. I am looking at extending the connections to my ASA 5510 appliance with the four port gig ethernet security module (4GE SSM). I am trying to find out what the limitations are on this particular module.
I have heard that there might be limitations to the 4GE SSM. Such as the interfaces on this module might process data separately from the ASA 5510 appliance. My question is does the ASA four port gig ethernet security module (4GE SSM) interfaces act as a extension of the ASA 5510 appliance or does it process and filter data separate from the ASA 5510 appliance ?
My concerns are that the 4GE SSM does not utilize all the security features of the ASA 5510 appliance, and that it just separates traffic into security zones. I interpret that to mean that each interface can be placed in a separate security level in which case has a separate security algorithm and uses the security level to force security policies. Nothing more.
My second question if relevant would be what are the limitations?
Thank you for your help on this topic.
mike

The 4GE SSM just gives you the four additional ports. It doesn't increase the processing capacity of the 5510 (a relatively low end box whose replacement - the 5515X - has been out since this past spring). It works off the same configuration script and CPU as all the built-in ports.
The only limitation I can think of off the top of my head is that members of an Etherchannel cannot span the SSM and the built-in ports.

What is the limitation for no of systems in communication

Similar Messages

Maybe you are looking for