What is the limited number of users?

WHile your question is a bit too vague to answer with certainty I'll start with a res[ponse and you can fine tune it if it is not what you are asking about.
The number of users of any single product for a single user license at any given moment in time is one.

Similar Messages

What is the maximum number of users that can be simultaneously connected to a shared drive on an Airport Extreme

What is the maximum number of users that can be simultaneously connected to a shared drive on an Airport Extreme?

50
I haven't tried this, but imagine that things are going to be quite slow.

HT4759 what are the limitations for PC users using iCloud?

I am considering iCloud for storing music, photos etc. Are there any significant limitations for PC users? Our family employs a mix of Apple and PC devices.

Of course, iCloud does a better job on Apple devices like iPhone, iPad and Mac, because it seamlessly works with the pre-installed apps like Mail, Contacts, Calendars, Reminders, Notes etc., but you could also use some of the features on a PC. This guide shows you, how you could set up iCloud on a PC: http://www.apple.com/icloud/setup/pc.html
On a PC you sync iCloud Mail, Contacts, Calendars, and Tasks via Outlook, snyc Bookmarks and Photos.
Some other Services like iWork apps (Numbers, Pages and Keynote) or Find My iPhone are missing, but accessible through the website www.icloud.com (new Chrome or Firefox needed)
By the way, iTunes is still needed for managing your music library.

What is the maximum number of user accounts that can be logged in at once?

How many users can be logged in at once, using Fast User Switching (FUS)?
Ideally, I'd like an "official" answer from Apple, or if someone can refer me to "official" Apple documentation that answers this question, that would be fine.
I think the answer is 10 but need to know for sure.
Thanks in advance!
Mac OS X (10.4.9)

You may be right about CLI vs GUI differences...
Call me a geek - but I wanted to see what would happen when my system hit the limit. So I saved all open documents, used a loop to create 40 passwordless accounts, then set up a login item so that on login, FUS would be invoked to log in to the next sequential uid.
When I came back (some time later), the system was logged in to the 40th user, and with a few exceptions, things seemed to be working ok...
The most obvious problem was that SystemUIServer was crashed in most of the users. I'm not sure when that started, but at some point after so many logins, it wasn't possible to launch the SystemUIServer, meaning no FUS menu (among other things). Other programmes launched and worked ok, though a bit sluggish (I had 7 swap files at that point, where it is rare for me to have more than two). But "Terminal.app" worked fine, and FUS was possible via command line so that wasn't a big problem, and the few other accounts I switched over to check were in a similar state.
The "Accounts" pref pane seems to be limited to showing 42 accounts (I had several accounts prior to creating the 40 test accounts), but the FUS menu (viewed from an account where SystemUIServer hadn't crashed) showed them all. I forgot to check the "Login Window".
Of course, there may be other things that don't work under these conditions that I didn't stumble across, but depending on whether or not SystemUIServer is required, and probably load and RAM availability, it looks like it is possible to squeeze at least 40 logins at once on a system.
And again, this obviously isn't "official" in any way.

What is the maximum number of user accounts that IMS 5.0 supports?

This sort of determiniation is based on several factors like:
- What access protocol is being used? (IMAP, POP, or Webmail)
- How often users check their mail
- What sort of hardware the server is running on.
- The network connection from the clients to the server.
- Is LDAP on the same system as iMS.
-Chris

What is the part number for License 8.6

I have call manager 8.6 and I need to add new license , can anybody tell me what is the part number?
dose it depend on the ip phone model ?

If you are a partner you can refer to the ordering guide:
http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/uc_og-ucl_cucm_mcs_cer_CUxAC_cime_sme-edcs840769.pdf
CUCM licenses are user based, so which license are you looking at CUWL, UCL?
This should help:
http://www.cisco.com/c/en/us/products/unified-communications/unified-communications-licensing/index.html

What is the recommended number of clients per Mac server? Also what are some recommended specs when purchasing an Apple machine that will have Mac OS X server installed?

What is the recommended number of clients per Mac server? Also what are some recommended specs when purchasing an Apple machine that will have Mac OS X server installed? We have around 300 clients that need to be enroled on the Mac server. I want to know what is the recommended amount of clients a Mac server should contain. Also what are some recommended specs to make sure the server will flawlessly?

Hello cpreasbeck,
Thank you for contacting Apple Support Communities.
I was able to find the following transition guide for Xserve that provides some workload guidance to determine performance when planning a server deployment.
Transition Guide Xserve
http://images.apple.com/xserve/pdf/L422277A_Xserve_Guide.pdf
On page 9, Performance there is a chart that provides maximum numbers of connected users for various activities such as file sharing, mail, web, calendar, directory services and Time Machine and the CPU used as a server (Xserve, Mac Pro, Mac Mini). This information is a bit dated as the referenced software is Snow Leopard Server (OS X 10.6), and the hardware is older also, but it should give you a general idea of what you might need to look for.
Regards,
Jeff D.

What's the maximum number of Apple TVs that can be displayed in the AirPlay list?

We have 50 conference rooms all on the same network and are considering equiping each one with an Apple TV for AirPlay Mirroring our iPad 2s to the rooms projector, or TV. What is the maximum number of Apple TVs that can be displayed in the AirPlay menu to select the correct Apple TV for the conference room being used?

From what you're saying it sounds as though you wouldn't want to Airplay to all AppleTVs at once, just identify them when that specific room in use?
This is one of those uncharted territories wheer most domestic users will not require such a set up - Apple provide no official info about this, but they'd be your best source to ask.
AC

What are the limitations of the software during the 30 day trial?

what are the limitations of the software during the 30 day trial?

Trials are fully functional.
The only limitation is that they will stop working 30 days after first launch.
You remove the time limit by entering a valid serial number which you get when you purchase the software. Or by subscribing to a Cloud membership plan.

What are the Limitations of EBP-SUS?

HI SRM Gurus,
What are the limitations of EBP-SUS?
1. Classic Scenario.
2. Extended Classic Scenario.
Is ASN possible with EBP-SUS extended classic scenario.
Version 5.0
Server 5.5
Thanks
Rams

Hi please refer to the OSS note with number 543544 for details
award points if usefull

What r the limitations of ST01

hi guys
what r the limitations of ST01?
thank u

Hi Sunny,
ST01 is used as Authorization Trace. Authorization Object S_ADMI_FCD gives access to the trace function
You can analyze authorizations as follows: Choose Tools -> Administration -> Monitor -> Traces -> SAP System Trace or Transaction ST01.
Choose trace component Authorization check and pushbutton Trace on. The trace is automatically written to the hard disk.
To limit the trace function to your own sessions, choose Edit -> Filter -> Shared. Enter your user ID in field Trace for user only in the displayed dialog box.
Once the analysis is completed, choose Trace off.
To display the results of the analysis, choose Goto -> Files/Analysis or the pushbutton File listSelect the required file and choose Analyze.
The results of the authorization check are displayed in the following format: <Authorization object>:<Field>=<Tested value>
The return code shows whether or not the authorization code was successful.
ST01 Return Code 0 -
Authorization check passed
1 -
No Authorization
2 -
Too many parameters for authorization check
3 -
Object not contained in user buffer
4 -
No profile contained in user buffer
6 -
Authorization check incorrect
7,8,9 -
Invalid user buffer
Hope it helps.
Please awatd points if it is useful.
Thanks & Regards,
Santosh

What is the maximum number of columns that can be displayed by sqlplus?

Hello,
Questions:
Is there a limit on what sqlplus can display?
What is the maximum number of columns that can be displayed by sqlplus?
I cannot find anything on this in my search. I checked the limits page:
http://docs.oracle.com/cd/B19306_01/server.102/b14357/apa.htm#sthref3658
http://docs.oracle.com/cd/E11882_01/server.112/e16604/apa.htm#i635278
It does not specify any column limits; however, I'm thinking it is tied to LINESIZE which is system dependent.
Please confirm if true.
Thanks!

Received answer directly from SQL*Plus Development:
"sqlplus does not have a limit on the number of columns it displays."
They created a table with more than 256 columns with data and had no problem retrieving the data.

What's the max number of columns a table can have on 32 bit OS & 64 bit OS

What is the max number of columns a table can have on 32 bit OS & 64 bit OS ?
Edited by: sameer naik on 02-Jul-2010 02:11

For TimesTen 7.0 and 11.2.1 releases the limit on the number of columns per table is 1000 for both 32 and 64 bit TimesTen. This can be found in the documentation under System Limits.
Regards,
Chris

What is the maximun number of front panel objects in LabVIEW 7

I need to know what is the maximun number of indicators in a panel control, LabVIEW 7.0

According to the post here the 555 limit in LabVIEW 6.1 is no longer in 7.0 but I don't know if there's a much higher limit or if you limited only by the amount of memory in the computer. How many do you have? By using clusters and arrays, you should be able to dramtically reduce the number. You might also want to think about moving seldom used indicators to subVIs that pop-up on demand.

What is the maximum number of Active Connection in SSG 7206VXR?

Hi,
What is the maximum number of SSG Host or active connection (show ssg service package) for Cisco 7206VXR which running with NPE-G1? The SSG is deploying with Web-login and the TCP-Redirect, Port-bundle and Pass-through is enabling. The SSG is to handling IP session authentication. The SSG is binding Gigabit Ethernet.
The current version of IOS is show as below.
Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 12.4(9)T1, RELEASE SOFTWARE (fc2)
Thanks,
Chia

To set the maximum number of services per user, use the ssg maxservice command in global configuration mode. To reset the maximum number of services per user to the default, use the no form of this command. ssg maxservice number and no ssg maxservice
If you want to know more please click following URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_command_reference_chapter09186a008017cf59.html

What is the limited number of users?

Similar Messages

Maybe you are looking for