What is the link between material processing & work-center
Hi all,
I have two types of material & few work center.
How can I determine, that which work centers could be applied over a specific material for the material processing.
Regards,
Saurabh
Dear Saurabh,
You may allocate one or more capacity categories to a work center. Capacity categories are defined in customizing. Examples are labor, machine, energy and so on.
You must maintain data to enable the system to calculate available capacity at that work center for that category. Examples include calendar assignment, start time, stop time, length of breaks, utilization, number of individual capacities. This is maintained in the capacity header screen of the capacity category for the work center.
If you indicate that a capacity is pooled, then it may be used by several work centers. An example is a setup team. They can perform setups at several work centers but can only work at one work center at a time.
Routings within a routing group are used for producing similar materials. One routing group can also contain routings with similar production processes.
The alternative sequence enables you to select alternative operations for a sequence of operations - for example in the case of different work procedures for different batch sizes or capacity bottlenecks.
The parallel sequence enables you to process operations independently of others.
A routing contains the operations to be performed, their sequence and the various work centers involved to manufacture an item.
A routing can include the following:
*The standard values (times) for activities such as setup and processing
*Work centers where the operations are performed
*The material components allocated to the operations
*Any production resources / tools necessary to perform the operation
*Inspection characteristics for operations where inspection is carried out
*Instructions of what to do at each operation
*Skills required to perform the operation
Reward points if it is helpful.
Regards,
Naveen.
Similar Messages
-
HI,
what is the link between 2lis_03_bf,2lis_03_bx and 2lis_03_uM.is these datasources to be loaded in the order.can anybody explain meHi
These three datasources are related to inventory. BF is for opening stock, BX is for material movements and UM is valuations. Before loading this data into BW you need to maintain some settings in R/3 side.
According to SAP NOTE:315880.T-code BF11.Activate the flag NDI will reflect in table "TBE11" For the entry "NDI".
2. set the application indicator 'BW' to active using Transaction 'BF11' . which will make tick mark(x) for the field AKTIV for the APPLK ='BW' in table TBE11.
3. Activate the PROCESSKEY under "Maintain Industry Sector"
4. Generated "STOCK INITIALIZATION" for 2LIS_03_BX.
5. Filled setup tables for "INVENTORY CONTROLLING"
6. Scheduled the InfoPackage for 2LIS_03_BX with update mode "GENERATE INITIAL STATUS.
then load BF and UM
There is a PDF available how to load inventory..just search for it in SDN.
REgards
Ram -
What is the link between schedule lines and delivery document item level
Can any one please explain me what is the link between the schedule lines of the order/scheduling agreement and the item level of the delivery.
Is there any link between VBEP and LIPS ?Hi
Most of the item level data in delivery doc is copied from Schedlue lines in Sales order for eg delivery date
So u may say that schedule line in sales order becomes the line item in Subsequent doc that is in Delivery doc .
The table u are talking about i.e VBEP is related to sales doc and it contain data for Schedule line in sales order and the other table i.e LIPS give the delivry doc related data at item level.
Hope this help -
What is the link between PO and Requisition in database side
hello friends,
please can any one tell me that what is the link between PO and Requisition in database side. means after creating the requisition we will go for create the PO based on that requisition.
want to know that what is the link between both in database side.
Thanks in advance
krish.Hi,
The link is at distribution level, between:
PO_DISTRIBUTIONS_ALL.REQ_DISTRIBUTION_ID
and
PO_REQ_DISTRIBUTIONS_ALL.DISTRIBUTION_ID
Hope it helps. -
we hav requirement where we need to join these tables.
can anybody tell ,What is the link between tables PA_PROJECTS_ALL and PA_PROJECT_ACCUM_ACTUALSThis looks like an Oracle Financials question.
I don't think anyone here can answer that.
You need to look for a Financials or E-business forum.
Sybrand Bakker
Senior Oracle DBA -
What is the link between "sood" and "ebelen" ( in me22n ) ?
in me22n there is an option to attach doc ,
what is the link between the order and the doc ?
i done st05 and found "sood" sofd"
also by answer here fm : SO_USER_READ_API1
but didnt find the link between the order "eblen" and the attach doc .
thanksy u are finding out link b/w EBLEN and Doc ? these tables are related to SAP office.
SOOD = SAPoffice: Object definition
SOFD = SAPoffice: Object Definition
Regards
Prabhu -
What is the different between Oracle Process Manuf and Oracle Discrete Manufatur in oracle?
Dear What is the different between Oracle Process Manufacturing and Oracle Descret Manufacturing in Oracle?
Hi Elad,
Depending on the requirement and the availability we go with implementing a particular database.
For xi point of view there is no difference between oracle and SQL database. However you need to intall the drivers of SQL.
Even there is no difference in the communication channel configuration.
Reward points if found helpful.
Thanks & Regards,
Bharath. -
What is the difference between Structure and Work area
Hi Guys,
What is the difference between Structure and work area?
Are they same with different names?
Thanks,
mini.hey buddies,*
i had this same doubt for a long time and i have my finds with me ie wa and structure are the same but wa can hold a single record but structure cannot hold data in it but according to the previous posts folks say structure too holds data as wa does but i guess when debugging wa holds data and structure doesnt hold bcoz i tried.
types : begin of str_mara,
matnr type mara-matnr,
ernam type mara-ernam,
end of str_mara.
data it_mara type table of str_mara.
select matnr ernam from mara into it_mara where matnr = '100-101'.
*********************if folks say wa = structure,this should work,isn't it?*********************************
loop at it_mara into str_mara.
write:/ str_mara-matnr , str_mara-ernam.
endloop.
*******************but it throws an error saying that str_mara is not a wa*******************************
i may not be correct too plz let me know if i'm wrong
Edited by: arun_aime on Feb 12, 2010 4:41 PM -
What is the relation between COST ELEMENT , COST CENTER n CONTROLLING AREA
Hai can any one help me in understanding what is the relationship between COST ELEMENT
COST CENTER and CONTROLLING AREA. and what actualy they explain me from basics.
thank's in advance.Hi
Go through the link given below :
Cost Center , Cost element , GL Accounts , Cost sheet , Account Assignment
http://wiki.answers.com/Q/What_are_cost_centre_accounting_and_cost_element_accounting_in_SAP_controlling
Controlling Area
With Regards
Nikunj Shah -
What is the link between likp,mseg,bkpf tables
hi,
i got to work with tables likp,bseg,bkpf,mseg tables. can any one help me telling the link between these tables..like how these tables are interrelated..thank you..Hi Bhaskar,
I know some information only.
First give likp-vbeln to lips and get lips-matnr, lips-werks,lips-charg. give these 3 values to mseg for getting the mblnr.
Thanks,
suma. -
What is the link between the tables DRAW and MARA
Hi,
Can you tell What is the link field between the tables DRAW and MARA
NageshHi,
There is no direct relationship. But you can find the materials attached as object liink to the document in table DRAD.
Hope it helps,
Rajat -
What is the link between LIKP or LIPS and EQUI?
Hi Masters,
Based on the Delivery Number (LIKP or LIPS), how we can fetch the data from EQUI table, EQUI-EQUNR (Equipment Number) and other fields?
LIKP or LIPS to EQUI, What is the link?
Thanks In advance.Have a look at below link, it might help you.
[Tables|http://www.erpgenie.com/abap/tables.htm]
I hope it helps.
Best Regards,
Vibha
Please mark all the helpful answers -
[SOLVED] What's the link between AUR and ABS?
Hi!
I'm still a bit new to Arch and recently I added google-talkplugin using AUR (https://aur.archlinux.org/packages/google-talkplugin/).
But apparently there is a link between AUR and ABS that I don't get already...
Most of all, will google-talkplugin be updated automatically when I do a "pacman -Syu" or I'll have to check for new version frequently and recompile everything each time?
I think maybe ABS is the solution to this problem...?
Thanks!
Last edited by Creak (2013-10-27 12:56:00)Creak wrote:About the AUR helpers, there is quite a long list of search/build helpers.. Is there better ones? I've just seen yaourt in a screenshot once...
This is highly subjective and depends on what you need and what your current experience level is. You will often see yaourt discouraged for new users - it just automates too much, so when something goes wrong, users who haven't used less-hand-holding tools have no idea how to proceed. I use cower, which has a simple command to check which AUR packages you have installed are outdated - but then it is up to you do update them yourself. I'd suggest something like the latter approach. -
What is the link between iphone's IOS and the iTunes version?
Hi, I have an iPhone 3gs using IOS 4.1. I do not want to upgrade this. What Itunes version is compatible w/ this? Can I keep the IOS and just make all updates in iTunes, or the newer versions do not work w/ IOS 4.1?
This looks like an Oracle Financials question.
I don't think anyone here can answer that.
You need to look for a Financials or E-business forum.
Sybrand Bakker
Senior Oracle DBA -
Link between Material Plant & Cost Center
Dear all ,
Whr can i get the report ,
Material Plant & Cost Center ?
Rgds
RajaHi,
Please check the following thread - http://scn.sap.com/thread/1713880
Hopefully all your answers will be answered in this thread!!!
Cheers!!
Dhawal Mehta
Maybe you are looking for
-
Dump when loading Data from DSO to Cube
Hi, i get a short dump DBIF_REPO_PART_NOT_FOUND when trying to load data from a dso to a cube. From DSO to DSO it works fine. any idea`s? thx! Dominik
-
My new iPod Touch doesn't want to connect with iTunes.
Before, I had an iPod Nano from the second generation, so it was one of the first iPods on the market. Now I got an iPod Touch for my birthday, but when I plug him in on iTunes it says that there's something wrong with the software. I need to deinsta
-
IDOC for FI open items ?
Hi, I need to export once a week a list of customer open items to a legacy system (to make it brief, this is what you get when you launch a FBL5N transaction). Is there an IDOC that can be used as outbound for this ? If there is one , how can I trigg
-
Wireless Bridge no longer reachable
The mac-address for the BVI on the wireless bridge is not attaching itself to the interface on the 6513 switch. We recently changed the vlans at the campus. At first I thought I had a vtp pruning problem but ended up being a spanning-tree problem.
-
Difference between cost center for material and sale order
Hi, I'm having an issue related to profit center. Our business of Reverse Logistics Process is taking the wrong profit center which should be taken from sale order master data, not from material master data as currently. As a developer, I'm confused