What is the little cloud doing in iTunes 11?

I've upgarded to the latest iTunes (version 11) and it keeps indicating that something is happening with iCloud... the little cloud icon keeps scrolling its grey bars across like it's doing something:
What is that little cloud icon actually doing? I have absolutely no material synced to iCloud so I can't imagine why it'd be trying to do anything there... especially without asking me first if that’s what I want.
Any help much appreciated. Thank you.

Hello Jerrold Green1
you said:
Best bet would be to go back to Numbers '09. If you can, locate a backup document from prior to opening and editing in Numbers '13 and reopen it in Numbers '09.
Are you thinking go into Time Machine to before I opened Numbers 3.1?
Or open Numbers '09 and open the Numbers in 3.1.
Arrrgggh,
I entered time machine to before I installed Mavericks, and before I opened and used Numbers 3.1. Selected the file in Time Machine, it brought in expenses 2014 to the location of the original. Message said there is one there, keep both, replace or something else.
I said keep both.
Clicked to open, it opened in 3.1. I used Numbers 9 2.3 to try to open the file and it said I needed a newer version of Numbers to open this file.
I appreciate your suggestions and with out wanting to conqure the world at this point I am going to cut bate and continue to use Numbers 3.1 as best I can. I am not an accountant or a number person, I am a blues musician and this file has been helping me for 4 years.
I'll get though the tax dance and evolve into numbers if need be as the year goes on.
Again, thanks for your interest in helping.

Similar Messages

What does the little cloud with a down arrow next to a song mean

I upgraded my phone from iOS6 to iOS7 and had to remove all my music to get enough space which is fine because I wanted to reload it anyways. When I opened the music app, thinking there would be no music there, I was surprised to fine hundreds of songs each with a little cloud with a down arrow next to them. What does the little cloud with the down arrow mean? If I click on it am I purchasing something? Are they songs I can listen to for free? I don't use and have never signed up for an iCloud account so they can't be songs I purchased because I haven't purchased any songs.

Means they are stored in the cloud and you need to download them.
Peter

I purchased a free app from app store for iPhone 5 and it will not download; just gives me the little cloud with arrow pointing down. I have version 7.1.2 What do I do?

I purchased a free app from App Store for my iPhone 5s, iOS version 7.1.2. It will not download; just gives me the little cloud with arrow pointing down. What do I need to do to get the app to load?

Hello mjhardy,
After reading your post, it sounds like you are experiencing an error while downloading apps. You may want to consider restarting the device first, and then resetting if that does not work. This article provides detailed instructions for Restarting, and Reseting:
Turn your iOS device off and on (restart) and reset
How to restart
Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Thank you for contributing to Apple Support Communities,
BobbyD

I want to airplay from macbook pro to apple tv. What are the possibilities? Does it allow me to play movies or videos I access through the browser as well?

I want to airplay from macbook pro to apple tv. What are the possibilities? Does it allow me to play movies or videos I access through the browser as well?

Welcome to the Apple Community.
Only content in your iTunes library can currently be sent via AirPlay from your mac.

What is the little black gauge on the upper left of the desktop?

What is the little black gauge on the upper left of the desktop? I just received my Omni 10 and set it up today. The screen (desktop) has this stupid black bar (gauge) on it that reads 100. I cannot move it, close it, or figure out what it does. Can any one help?
Thanks.. sometimes we old guys are a little slower to learn new stuff
FayetteTerry
This question was solved.
View Solution.

I spotted your request when it was 1st posted, but I haven't experienced the 'phenomenon' myself so I've been waiting for someone who had, to post a fix — possibly saving you from some troubleshooting steps...
If you've already found a solution, updating your original post might help steer others to that solution in the future. On the other hand, we can proceed to trying a few things to narrow-down what's causing that "stupid black" blight on your tablet's screen:
Right-off, regardless of the cause — just shutting-down then restarting your tablet may correct the issue; if the bar persists after that, you might check via Task Manager to identify a likely suspect under Startup items. Your description suggests a battery gadget or an app which uses the built-in microphone displaying the mic's sensitivity setting — possibly Skype or other 'social media' software.
Please update this thread with your current status re. this issue...

What are the system requirements for apple itunes 11.1?

what are the system requirements for apple itunes 11.1?

For Mac:
http://support.apple.com/kb/SP663
Software:
Mac OS X version 10.6.8 or later (intel-based hardware)
400MB of available disk space
iTunes in the Cloud and iTunes Match availability may vary by country.
Hardware:
Mac computer with an Intel Core processor and 512MB of RAM
To play 720p HD video, an iTunes LP, or iTunes Extras, a 2.0GHz Intel Core 2 Duo or faster processor and 1GB of RAM is required.
To play 1080p HD video, a 2.4GHz Intel Core 2 Duo or faster processor and 2GB of RAM is required.
Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
Broadband Internet connection to use the iTunes Store
Apple combo drive or SuperDrive to create audio, MP3, or back-up CDs; some non-Apple CD-RW recorders may also work
Apple SuperDrive to back up your library to DVDs; some non-Apple DVD-RW drives may also work.
You can run OS X 10.6.8 in an Intel-based MacBook w/ first model, in retail DVD.
But it won't work in a power-pc architecture Mac... see specifications:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Hopefully this helps.
Good luck & happy computing!

What do the little icons mean?!?!

Hi,
A quick question, well 2 really!
I have a specially inquisitive client, who is always asking me difficult questions:
1) In mail, what do the little icons mean that you sometimes get when opening an IMAP account. They look like little circles next to the inbox name - one has, like, 3 quarters filled in, the other has, maybe, 1/8th filled in... I can't find this information anywhere!
2) Why does it take longer to show messages for IMAP accounts? I guess its because Mail is checking the synchronisation (or something else) between Mail and the IMAP server, but what's the official line?!?!
Cheers!
JS

Hi James,
Since no-one else has replied I'll try to answer your question.
The circle you discribe is shown to the rightside of inbox when the Mail-app is connecting (retrieving) messages. Or when you click on another mail-box such as Trash or Junk. If it's not completing which it should then disappear, Apple suggests you go to DOT-MAC & read your mail there. This is because since the release of Tiger or mid 2005 Mail-app has difficulty reading unread mail from DOT-MAC! But I do find that if it's already open it can sort my in-coming Junk mail OK! And un-read messages. This answers your second question, I hope this helps.

What are the little red squares on the lower left hand corner of a movieclip in the actions panel?

What do the little red squares on the lower left hand corner of the movieclips in the actions panel mean? [Fig. 1]
I'm working off this template in Flash CS3, that's using ActionScript 2.0 actually.
I don't know whether or not that means anything in regards to the above inquire?
Again, any help is appreciated.
Fig.1

OK, I think I might have figured this out.
First. You guys keep insisting it's the Movie Explorer. It is not. It is the Actions Panel. You can see for yourself. Option+F9 opens the Actions Panel. Option+F3 opens the 'Explorer Window'. They are similar in appearance but they're not the same thing. They're just not.
Second. I believe that the red dots on the movieclips, and also buttons, indicates when there is actionscript directly on the movieclip and/or button, as oppose to actionscript written on a frame within a movie clip and/or button.
You really have to pay special attention to the top of the Actions Panel right next to where it says 'Actions' there's a dash '–' and then it says either 'Frame', 'Movie Clip', or 'Button'. This indicates exactly where you're about to write script to, or where you're reading the script from, so it's important to pay attention to this.
That left side pane, in the Actions Panel, is divided by 'Scene' and by 'Symbol Definition(s)' and it's confusing because it's possible to have a symbol appear more than once depening on where the actionscript is located (i.e. on a frame or on the movie clip or button itself).
For example if you have script on a FRAME within movie clip A, it'll appear in the SYMBOL DEFINITION(S) pane, without a red box, but if you were to write script on movie clip A itself, it would still not have the red box on it in the SYMBOL DEFINITION(S) pane, BUT it would appear again as movie clip A in the SCENE pane, and this time it would appear with the red box next to it, casue it now has actionscript directly on the movie clip itself. Wow, how confusing is that ha.
Keep in mind that if you made a movie clip B, within movie clip A, and if you placed actionscripts directly on movie clip B, NOT on a frame, then movie clip B would get a red box and appear UNDER movie clip A, within the SYMBOL DEFINITION(S) pane, NOT the SCENE pane. Ha.
If you wrote script on a FRAME within movie clip B it would appear in the SYMBOL DEFINITION(S) again, yes a second time, twice, but WITHOUT a red box. Confused yet? ha.
I don't know why Flash decided to do it this way. But it starts to make sense when you're actually viewing it, when it's in front of you. I think this is just for actionscript 2.0 (and for actionscript 1.0 presumably), but I don't think this is the case for ActionScript 3.0, because in as3 it's all instance name based, and targeting based, so there's no such thing as writing script directly onto a symbol of any kind, button, movie clip or otherwise.
But yeah, that's it in a nutshell.
Thanks for trying to help anyway.

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

It actually sounds like the warp text window is opening off screen.
Resetting the photoshop elements 10 preferences should fix it.
*Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
*Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
*Press Yes

How do I delete apps in os5? I press and hold the icon and they all begin to shake but the little x does not appear allowing me to delete.

How do I delete apps in os5? I press and hold the icon and they all begin to shake but the little x does not appear allowing me to delete.

You can't delete any of the Apple built-in apps e.g. Music, App Store, Game Centre etc. If you don't get the 'x' on any of the apps that you've downloaded then check that Settings > General > Restrictions > Deleting Apps isn't set 'off'

What is the flollowing code doing?

What is the flollowing code doing? What do the %2 %3 %4 %5 %6 %7 stand for?
java %COH_OPTS% -Xms1g -Xmx1g -Xloggc: com.tangosol.net.DefaultCacheServer %2 %3
%4 %5 %6 %7

%2 would need to be the path to the "cache-config.dtd" compliant configuration file.
%3 the interval in second to check the service status.
The rest would be ignored.
For Example:
java -server -Xms512m -Xmx512m com.tangosol.net.DefaultCacheServer coherence-cache-config.xml 5
Re: What is the flollowing code doing?
Thanks,
Everett Williams
Coherence Team
Edited by: ewilliams on Aug 26, 2009 2:36 PM

What is the reason of doing recording in BDC !

What is the reason of doing recording.....CAn we directly write the code ???

Hi,
OKCODE is nothing but the button clicks which you have performed while creating or changing a document.
You will be moving around in the transaction for creating a document and finally you click the save button. When click the save button then you will generally have the OKCODE as '=SICH'.
The OKCODE basically tells you which button you have clicked, as you are having so many options in the transaction to work around.
Thanks,
Mahesh.

What are the following entries doing in the following configuration file?

What are the following entries doing in the following configuration file?
Thank you
<include>coherence-pof-config.xml</include>
<allow-interfaces>true</allow-interfaces>
<allow-subclasses>true</allow-subclasses>
<?xml version="1.0"?>
<!DOCTYPE pof-config SYSTEM "pof-config.dtd">
<pof-config>
<user-type-list>

<include>coherence-pof-config.xml</include>

<allow-interfaces>true</allow-interfaces>
<allow-subclasses>true</allow-subclasses>
</pof-config>

<allow-interfaces> - The allow-interfaces element indicates whether the user-type class-name can specify Java interface types in addition to Java class types. Valid values are "true" or "false". Default value is false.
<allow-subclasses> - The allow-subclasses element indicates whether the user-type class-name can specify a Java class type that is abstract, and whether sub-classes of any specified user-type class-name will be permitted at runtime and automatically mapped to the specified super-class for purposes of obtaining a serializer. Valid values are "true" or "false". Default value is false.
<user-type-list> - The user-type-list element contains zero or more user-type elements. Each POF user type that will be used must be listed in the user-type-list. The user-type-list element may also contain zero or more include elements. Each include element is used to add user-type elements defined in another pof-config file.
<include> The include element specifies the location of a pof-config file to load user-type elements from. The value is a locator string (either a valid path or URL) that identifies the location of the target pof-config file.
http://wiki.tangosol.com/display/COH35UG/user-type-list
http://wiki.tangosol.com/display/COH35UG/pof-config
Thanks,
Everett Williams
Coherence Team

What are the following script doing?

What are the following script doing? What does symbol *<* stand for?
protected Map<Member, List<String>> divideWork(Set members, List<String>
fileNames)
Thank you

su_penguin wrote:
Side note: http://en.wikipedia.org/wiki/Operator_overloading
Extra credit: What trick does Java's syntax use to allow Generics to compile with or without whitespace between the angle brackets? Ex: Map< Member, List< String > >
Why doesn't it work in C++?Does this have something to do with the comment "Note that it is not an LL(1) grammar"? [http://java.sun.com/docs/books/jls/third_edition/html/syntax.html]

What is the proper way to reinstall iTunes after error 42404 without losing all my music?

What is the proper way to reinstall iTunes after error 42404 without losing all my music?

Here's what I do when I have iTunes problems and it works 9 out of 10 times. I have Ccleaner; It's a wonderful tool to have. If you don't have it, google it and install it, just the free version. You'll see the list of all of your installed programs in there to unstall (among of a host of other things you could do with that program) but anyway, right click on Apple Software first to repair, when done then right click on Apple Application Support to repair, then when done with that, right click on iTunes to repair that and all should be well after that. No uninstall should be necessary at all when you do all that.

What is the little cloud doing in iTunes 11?

Similar Messages

Maybe you are looking for