What is the little Spider / Bug button for?

I was at my parents house today and downloaded Safari on my Dad's Windows XP laptop. There was a button next to the address bar that looked like a "spider" or "bug"... I didn't have time to toy around with Safari and waited until I got home. Downloaded it on my Mac and the button isn't there... ???
Anyone know what this button does, and why it isn't on the Mac version?

As stated above, its a "Report Bug" button (You can read that by going to View - Customize Toolbar... Obviously its too hard to make tooltips for the app interface). Why it's not on Mac version? Well, probably because they expect many report bugs on Windows version.
Or maybe they think Windows users are stupid enough not to find it in the menu.

Similar Messages

My ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

my ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

You need to connect to iTunes and restore.
iOS: Not responding or does not turn on
You may need to put the device into recovery mode, this is covered in the link on this page.
Did you back up the device?

What is the little hole next to the headphone jack for?

What is the little hole next to the headphone jack for? Not the SIM card eject on the side. The similar hole near the headphone jack.

The hole on the top is your noise cancellation for phone calls and application VOIPs. It may also be used on other kinds of apps such as memos and video recordings.

I just pluged in my Apple TV and I can't get passed the initial page that ask what language. My remote won't pair. holding the menu and right button for 6 sec

I just pluged in my Apple TV and I can't get passed the initial page that ask what language. My remote won't pair. holding the menu and right button for 6 sec

Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

What are the little red squares on the lower left hand corner of a movieclip in the actions panel?

What do the little red squares on the lower left hand corner of the movieclips in the actions panel mean? [Fig. 1]
I'm working off this template in Flash CS3, that's using ActionScript 2.0 actually.
I don't know whether or not that means anything in regards to the above inquire?
Again, any help is appreciated.
Fig.1

OK, I think I might have figured this out.
First. You guys keep insisting it's the Movie Explorer. It is not. It is the Actions Panel. You can see for yourself. Option+F9 opens the Actions Panel. Option+F3 opens the 'Explorer Window'. They are similar in appearance but they're not the same thing. They're just not.
Second. I believe that the red dots on the movieclips, and also buttons, indicates when there is actionscript directly on the movieclip and/or button, as oppose to actionscript written on a frame within a movie clip and/or button.
You really have to pay special attention to the top of the Actions Panel right next to where it says 'Actions' there's a dash '–' and then it says either 'Frame', 'Movie Clip', or 'Button'. This indicates exactly where you're about to write script to, or where you're reading the script from, so it's important to pay attention to this.
That left side pane, in the Actions Panel, is divided by 'Scene' and by 'Symbol Definition(s)' and it's confusing because it's possible to have a symbol appear more than once depening on where the actionscript is located (i.e. on a frame or on the movie clip or button itself).
For example if you have script on a FRAME within movie clip A, it'll appear in the SYMBOL DEFINITION(S) pane, without a red box, but if you were to write script on movie clip A itself, it would still not have the red box on it in the SYMBOL DEFINITION(S) pane, BUT it would appear again as movie clip A in the SCENE pane, and this time it would appear with the red box next to it, casue it now has actionscript directly on the movie clip itself. Wow, how confusing is that ha.
Keep in mind that if you made a movie clip B, within movie clip A, and if you placed actionscripts directly on movie clip B, NOT on a frame, then movie clip B would get a red box and appear UNDER movie clip A, within the SYMBOL DEFINITION(S) pane, NOT the SCENE pane. Ha.
If you wrote script on a FRAME within movie clip B it would appear in the SYMBOL DEFINITION(S) again, yes a second time, twice, but WITHOUT a red box. Confused yet? ha.
I don't know why Flash decided to do it this way. But it starts to make sense when you're actually viewing it, when it's in front of you. I think this is just for actionscript 2.0 (and for actionscript 1.0 presumably), but I don't think this is the case for ActionScript 3.0, because in as3 it's all instance name based, and targeting based, so there's no such thing as writing script directly onto a symbol of any kind, button, movie clip or otherwise.
But yeah, that's it in a nutshell.
Thanks for trying to help anyway.

What is the default iTune Folder Structure for iTunes 10?

What is the default iTune Folder Structure for iTunes 10? As far as I can tell in windows 7 it goes something like.
My Music\iTunes\iTunes Media\Music
Other folders for downloads, pod casts, mobile applications are all in the iTunes Media folder, however the iTunes library database files are located in the iTunes Folder.
The reason I ask is that I am re-doing my music collection and I set up the folder structure mentioned above, but iTunes re-arranded everything and copied all of my music into the iTunes Media folder.
Anyone have any idea how iTunes does it by default?

Here are typical layouts for the iTunes folders:
If you have upgraded from version 8 (or earlier) to iTunes 9 (or later) at some point, then your media folder (everything inside the red outline) may still be called iTunes Music instead of iTunes Media. The extra Music folder inside the media folder is used if you have allowed iTunes to Upgrade to iTunes Media Organization (iTunes 9) or used File > Library > Organize Library > Reorganize files in the folder "<Media Folder>" (iTunes 10). Depending on your choices for Keep iTunes Media folder organized and Copy files to iTunes Media folder when adding to library plus a little bug in which one build changed the name of the file storing the choice of layout it is quite easy for some of your files to be organized according to one layout and some the other.
Assuming you're happy letting iTunes organize your files the following steps should tidy things up (should it be necessary):
1. Select File > Library > Organize Library... > Tick Reorganize files in the folder "<Media Folder>" and click OK. Skip if this option is greyed out (already upgraded) or you prefer the older layout.
2. Select File > Library > Organize Library... > Tick Consolidate files and click OK. This will bring any files currently organised outside the designated media folder into it. NB This will create duplicate copies of any file that needs to be consolidated, and you will need to manually clean up afterwards. If space is at a premium try my scripts Unconsolidated to find out what would need moving and ConsolidatebyMoving to move rather than copy it.
3. Select Edit > Preferences > Advanced tab, uncheck Keep iTunes Media folder organized and click OK.
4. Select Edit > Preferences > Advanced tab, check Keep iTunes Media folder organized and click OK. This triggers iTunes into reorganizing everything according to your preferences.
5. (Optional) Close iTunes, rename the folder iTunes Music as iTunes Media then restart iTunes. Check under Edit > Preferences > Advanced tab that the location has automatically updated. If you can't access the media for any reason just undo the folder rename.
6. (Optional - Windows only) If Windows Media Player has ever had access to your files it may have liberally scattered folder artwork files about which iTunes won't tidy up when it reorganizes things, thus leaving behind a heap of folders with artwork and no media. I've written a script for cleaning this mess up called CleanDeadArt.
PS If you really prefer the older layout, but it is already in the new one then edit the file called .iTunes Preferences.plist in your media folder and change the integer from 1 to 0 before doing step 3.
tt2

MM - PO - what is the meaning of this button?

Dear friends,
Could anybody help me with one question.
There is a strange button in a Purchasing Order on the Account Assignment tab page on this screenshot (it is marked with red color).
Screenshot below
http://content.foto.mail.ru/mail/raiden87/81/i-84.jpg
What is the meaning of this button? When it is used for?
I hope that anybody knows the meaning =)

hi raiden,
as for as i have gone through the issue I have come to know that:
If you want to use multiple account assignment for a line item in PO then at that moment you will have to first press the "repeat on " button. only after that multiple account button will be active that is just before your "repeat on " button.
Steps:
1:Save your PO.
2:Go to transaction code ME22N to change the PO.
(Here you will firstly see that the multiple a/c assignment button is firsty gray.It will become active only after when you press the "repeat on" button).
I hope It will be helpfull for you.
regards,
Aslam Ansari.

What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

What is the best word processing program for mac?

What is the best word processing program for Mac?

That's an impossible question to answer - what type of writing will you be doing?
Before we can point you in a direction you need to tell us what kind of writing you will be doing. As phrased, the question is a bit like "what's the best car?" Well few would doubt that a Ferrari is superior to a Honda minivan, but the Ferrari will not much use if you're dragging 4 kids, two dogs and the grandparents along.
Academic?
Word is the nearest thing to a standard format in the Humanties, but in the sciences and math you'll find Tex more useful for laying out formulas. The older Pages is quite good as a substitute for Word in many cases in the Humanties, but you'll have big problems with citations in the newer version. Apps like Nisus Writer Pro and Mellel are more powerful than Pages, but each have shortcomings. Scrivener and Ulysses are excellent drafting tools but you'll need a Word Processor for final layout. There are lots and lots of lightweight editors out there - Byword, iaWriter (and Writer Pro), OmmWriter - that have little functional use in Academic settings - poor or no support for citations for instance, or poor or no interoperability with Word - but which might be excellent for other uses.
So, back to the key question: what kind of writing will you be doing?

What is the best way to prepare for CERTIFICATION?

what is the best way to prepare for CERTIFICATION?
what is needed?
where can i read more about it?

Hi,
Do as much as possible exercises based on your course material(which will be more than enough).
If you know (some) Java and have understand the basics of OOP then this is enough for the exam.
And do not forget:
it is a multiple-choice test meaning that you see the possible answers.
Either a single answer is correct (then you will have radio-buttons) or several answers are correct
(then you will have checkboxes; in this case almost all questions will have more than one correct answer).
You can refer to the topics for the certification
https://websmp102.sap-ag.de/~sapidp/011000358700000499112003E
Some links which might help
/message/213564#213564 [original link is broken]
/message/514469#514469 [original link is broken]
/message/1315746#1315746 [original link is broken]
/message/1736299#1736299 [original link is broken]
/message/1736299#1736299 [original link is broken]
/message/257122#257122 [original link is broken]
/message/130164#130164 [original link is broken]
/message/1916905#1916905 [original link is broken]
/thread/167254 [original link is broken]
/message/213564#213564 [original link is broken]
/message/1315746#1315746 [original link is broken]

you try www.sapdoamin.com
They provide Certification simulation questions which are veryuseful and a must try site.
Yes more questions comes on OOPS so get your OOPS concepts very clear.
You don't need to do extensive coding in OOPS.
Just get the concepts clear and i am sure the certification will be a cake walkthrough.
All the best and good luck with your ABAP Accreditation.

What are the connections to be done for file-to-RFC scenario in XI & R3 ?

Hi,
What are the connections to be done for file-to-RFC scenario in XI & R3 & also if it is RFC-to-File .
I need to know what type connections used for file-to-RFC in backend .
In SLD it should be Third Party or WEB AS ABAP..

Hi Nandan,
Perform the following configurations...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
Regards
San
Remember to set the thread to solved when you have received a solution there is a Way.

What is the procedure/code in VBA for passing the calc scripts dynamically based on the selection.

Hello Gurus,
I want to know what is the procedure/code in VBA for passing the calc scripts dynamically based on the selection.
For example:
X=EssVCalculate("Sheetname","Calc_Script name",True)
In the above code instead of the *"Calc_Script name"* I want a script which is called dynamically and the values are calculated accordingly.
Thanks in advance
Saurabh

Hi Todd,
This is the situation:
I have a calc script in Essbase which I can call to perform the calculations on the current sheet that is retrieved. I want calculation for the following formulas:
x = EssVCalculate("Sheet2", "CalcBC", False)
CalcBC is my calc script which is present in Essbase
So instead of passing the above script I want to pass the conditions dynamically in the VBA code . I don't want to mention the script name directly in EssVCalculate option
For example:
I have three drop down menus from which I would select three different( zero level )members. It would then retrieve the data for that particular values in the excel sheet and now when I click on Calculate button it should calculate the script dynamically.
I don't know how calc scripts can be executed dynamically in the VBA code itself.
Thanks in Advance
Saurabh

Foxit Reader has just been upgraded to 7.0. What is the latest Foxit Reader Plugin for Mozilla?

Today 24 Sep 2014 I received notice and Upgraded to Foxit Reader 7.0.
Under Plugins in Thunderbird it says Unknown. When you click on the Research Button the question is not answered in the list given.
I am presently using Plugin 2.2.4.903 is there a later one.
What is the Latest Foxit Reader Plugin for Mozilla?

You'd need to check with Foxit. Plugins are 3rd party software, and not provided by Mozilla.

What is the best iTunes Equalizer settings for Bose QC15 Headphones?

What is the best iTunes Equalizer settings for the Bose QC15 Headphones? An image of those settings would be great.

I'm a bit of an audio geek, so I can tell you that YES whatever sounds right is what you want, but NO those settings are not very good. The general setting is "OK" but the values are extremely out of range. Take that setting and reduce the distance between the sliders and you're getting there. Look for example at how the other iTunes presets are made, the don't go that far from the horizontal middle, and for good reason.
When you play a recorded song, the song has usually been put through an extensive process of mixing, EQ and mastering before you got it, in order to get the best balance of all frequencies, to ensure the best sound accross a wide range of speakers and headphones, and to ensure the most important details and instruments are audible when played together.
All speakers are different, and that's where the idea of an EQ for the listener is introduced. The idea is to tweak the overall sound from your music player (iTunes) to compensate for the strengths and weaknesses of your speakers. Which to be honest, is a bit much to expect form a typical music consumer.
The iTunes EQ has a set of horizontal lines representing 3dB (volume steps) each. In my experience you should not boost or cut more than 6 db at the most - and that's a lot! I stay at around 0-4dB. The extreme options are there to cut noise from bad recordings or emphasize a detail you can't hear very well.
So here's basic EQ lesson:
The EQ represents the range frequencies in sound that the human ear can hear. Actually they go beyond that - most people cannot hear the far left and right frequencies. The range of frequencis start at "deep" or "low" frequencies at the left (bass) passing through the Midrange (midtones) in the center, to the (treble) at the right.
Your speaker has a limit to how many frequencies it can play at once before it starts to lose detail - meaning one sound will drown out in order to make room for another. So don't over-EQ your sound or it'll ruin it.
How to tweak an EQ:
1) Start by playing a well-produced piece of modern music - it'll most likely be well mixed and employ a wide range of frequencies. I'm into heavy metal but for this I'd probably go with some average pop music, because metal is so noisy it gets hard to pick out the details.
2) Set you EQ to FLAT - zero all accross the board. It'll sound pretty flat and boring unless your speakers are very "flavoured" or "colored" already.
Sliding any of the EQ bar up, will increase or boost the volume of the frequency the bar represents. You can't really add frequencies that aren't there already - you're just adding noise in that freqeuncy and that will "fill up" the available frequencies on your speaker, causing that "drowned out" effect I was talking about.
Instead, slide them down from the center, and you're cutting the volume instead. This is better because it'll leave more "room" for the other frequencies. You can always use the Preamp slider at the end if you're worried about loudness (but I wouldn't).
3) Start by tweaking the 500 and 1K slider. This represents the middle of your ears' range of hearing and the most noticable change. It should most likely go downwards - this will take the "canned" sound out of your music and that'll be apparent quickly. Go ahead and slide that down as far as -6dB.
4) Now work outwards from the center forming a "v" shape, where the top tips of the V end at the 64 slider and the 8k slider. The very far left and right sliders (32 and 16K) should dip down again to about 0bB. Trust me, these are almost non-important in most music. You can tweak thos last if you feel it's needed.
5) now it's time to start playing round with the V shape. Go ahead and try sliding the sliders a little up or down between 125-250 and 1K to 4K. You may find that some need to move a lot out of the average "V" shape before the sound is good. This is what my iTunes EQ settings ended up looking like for my Motörheadphones "Motorizer" headphones:
Hope it helps.

What is the little plastic piece that comes with my iPod??

What is the little plastic piece that comes with my iPod?? It looks like some kind of dock, but it is oddly shaped. There is nothing about it in the user guide. What is it?

Hi trancelot,
That white plastic piece that comes with your iPod is the adaptor for the iPod Universal Dock.
-Kylene

What is the little Spider / Bug button for?

Similar Messages

Maybe you are looking for