What is the longest distance from the cabinet that...
Hi,
I've seen the charts and tables now I would like to know what the longest distance from the cabinet anyone has actually achieved 25Mbps with FTTC please ?
Best regards,
dfenceman
It's hard to say, I'm between 800 - 1000m I would imagine and get 26Mbps.
31db Attenuation which seems a bit wrong to me, though an engineer told me that so it may be incorrect.
The charts are only a ratio as well with basis of an average line, you may have a bad line or a good quality line.
You could find out but I doubt you will find the volunteers and wish to put months of hard work into it.
If this helped you please click the Star beside my name.
If this answered your question please click "Mark as Accepted Solution" below.
Similar Messages
-
Everytime I use IE, first I have to click on the IE bar to allow blocked contect to display. What is the content that is being blocked from IE? viewers may not know what the problem is and see my site totally out of format.
discoveriweb wrote:
This is iweb development where after publishing, things look different in IE than other browsers. U r correct that this is due to IE software but is iWeb related. After all, one uses iweb not to just publish in Safari but for all browsers.
Which means that you are only considering half of the problem, but that's your choice.
I'm out. -
But it can auto sync when i connect it to my old laptop. what's the problem that it can't auto sync and when i did a backup in my new laptop, it was corrupted the next day and i was forced to use back a backup which i did in my old laptop 4 months ago. do i have to reinstall the itunes? will my backups be corrupted after i sync again? pls guide.
P.S/ its the latest version of the itunes whenever i did the backups.iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?
-
Dear Experts,
I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. What are the parameters that I need to set in CRM system so that my quotation gets replicated without any error?
Please help me in this regard. An early and in detail step by step guidance is highly appreciated.
Thanks,
SMTPIt may be best to recreate the folder and the smart playlists from scratch.
tt2 -
What are the chances that an actual timestamp will be added to the Canon XF200 ?
I shoot depositions for a living and a timestamp is required sometimes. I upgraded to the XF200 from the XHA1s. the XHA1s had a timestamp so i assumed the XF200 would as well. I saw inthe manual that the time and date could be displayed so I bought the camera. you have to manually turn off all displays except the date and time. This works as long as you dont have to change your aperture, wb, or other settings. When you change any of these the display pops up and is also recorded. I'm just wondering why Canon would get rid of the timestamp. I asked if they could add it using a firmware update but all they said was that enough people need to ask for it. What is enough?
"What are the odds that my hard drive will be salvageable?"
Very very good, it's all sealed and only a large electrical surge or dropping it while running could do some damage.
Take it and use a SATA to USB adapter you can get online for $12-$40 and hook it right up to the new Mac and use Setup Assistant or Migration Assistant to transfer files.
OR you can access the drive directly and on a PC with MacDrive installed.
However the Mac itself is likley a goner. -
What r the steps that involve while v r using DBCONNECT AND UDCONNEC
Hi All,
What r the steps that involve while v r using DBCONNECT AND UDCONNECT AND IN WHICH DIFFERENT SCENARIOS V USE THEM.
REGARDS
KKHi,
To Configure UD Connect on the J2EE Server for JDBC Access to External Databases;
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
To create Driver on JDBC side
http://help.sap.com/saphelp_nw70/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm
Configuring the BI Java Connectors
http://help.sap.com/saphelp_nw70/helpdata/en/43/e35b3315bb2d57e10000000a422035/frameset.htm
Then to extract data use this...
Before you can transfer data from UD Connect sources into BI, you have to generate the metadata (the information about the source object and source object elements) in BI, in the form of a DataSource with a function module for extraction.
If your dataflow is modeled with objects based on the old concept (InfoSource 3.x, transfer rules 3.x, update rules 3.x), you can generate a DataSource 3.x for transferring data into BI from a database source system.
Prerequisites
You have modeled the InfoObjects that you want to use in the InfoSource and the data target or InfoProvider according to the UD Connect source object elements.
Note the following background information:
Using InfoObjects with UD Connect
Data Types and Their Conversion
Using the SAP Namespace for Generated Objects
Procedure
You are in the Modeling InfoSource tree of the Administrator Workbench. First create in InfoSource and activate the communication structure. Then generate the generic DataSource using the wizard in the InfoSource maintenance.
1. Choose InfoSources ® Your Application Component ® Context Menu (right mouse click) ® Create InfoSource.
2. Select the type of the InfoSource.
3. Under InfoSource, enter the technical name of the InfoSource, and assign a description and choose Continue.
The system creates an InfoSource and shows it in the InfoSource tree under your application components.
4. In the context menu of the InfoSource, choose Change .
The communication structure maintenance screen appears.
5. Using the previously modeled InfoObjects, create the communication structure (see Communication Structure).
6. Save and activate your communication structure
7. In the dialog box that follows you will be asked whether you wish to activate the dependent transfer program. Choose No.
8. In the InfoSource menu, choose Extras ® Create BW DataSource with UD Connect.
You get to the dialog box where you can assign a UD Connect source object to a DataSource and then generate the DataSource with the extractor. The fields for the DataSource are already being displayed in the table on the left side of the screen. The fields have the same name as the InfoObjects that you have used in the InfoSource.
9. Select the RFC Destination for the J2EE Engine.
Make sure that the local server is running. If the local server is running and you cannot open the table for RFC destinations, start the local server again.
10. Choose the UD Connect Source in which the data that you wish to access is located.
All available sources that are connected to the J2EE Engine are provided for selection in the input help. n instances are available per adapter.
11. Select the UD Connect Source Object.
All available source objects that are available in the selected UD Connect source are provided for selection in the input help. Source objects can be multi-dimensional storage or relational objects.
The system generates the name of the DataSource in the namespace 6B.
The DataSource is then replicated in BI.
The myself system is assigned to the InfoSource as source system as well as the DataSource.
The system generates a proposal for the transfer rules.
Since the DDIC structure and the function module are located in the SAP namespace, the following entries can be requested during generation:
Developer and object key or
Developer key or
Object key and
Transport request
If you do not make the requested entries, the generated infrastructure is not usable.
14. Change or complete the transfer rules as needed. For example, if a source object element is not assigned to a unit InfoObject, you can determine a constant for the unit, such as EUR for 0LOC_CURRCY (local currency).
15. Save and activate your transfer rules.
Recognizing Manual Entries
You can enter and change the RFC Destination, UD Connect Source and UD Connect Source Object manually. In order to validate these entries and the ones that depend on them, choose Recognize Manual Entries. For example, if you change the selected RFC destination, all of the field contents (US Connect Source, UD Connect Source Object, list of the source object elements) are invalid. If you choose Recognize Manual Entries, the dependent field contents are initialized and have to be maintained again.
Result
You have created the InfoSource and DataSource for data transfer with UD Connect. In the DataSource overview for the myself system, you can display the DataSource under the application components Non-Assigned Nodes.
When modeling InfoObjects in BI, note that the InfoObjects have to correspond to the source object elements with regard to the type description and length description. For more information about data type compatibility, see Data Types and Their Conversion.
The following restrictions apply when using InfoObjects:
Alpha conversion is not supported
The use of conversion routines is not supported
Upper and lower case must be enabled
These InfoObject settings are checked when they are generated.
Based on the large number of possible UD Connect sources, the most diverse data types are possible in the output system. For this reason, a compatibility check is made at the time of generation of the UD Connect DataSource that is based on the type information supplied by the source systems. This attempts to decrease the probability of errors during the extraction process.
(Refernce:SAP Notes)
Hope this helps,
regards
CSM Reddy -
What is the possibility that I bought a completely new iPhone with different SN on each component?
Hi all,
M right in the Apple store in Shanghai writing this post. And still feeling bad about what I have experenced today.
Last June, I have got a completely new 4S to replace my old 4, which had encounted many annoying issues when I was using it. And this 4S was a completely new one, I mean, not those officially retrofit ones for ordinary replacement when reparing. Howevewhen the locking button doesn't work well and I came for warranty today. The genius told me that the SN on main board and the sim card support doesn't match and refused to repair it.
Brilliant! This is the FIRST time that I am going to get my new 4S repaired and, BANG! it just became some sucky 4S that I have tried to repair it by myself or some un-official channel? And I think I have never done these things before. Well at least when I am still myself.
Now the genius is trying to confirm this device after I provided my recipt for last repair.
Is Apple became more unefficient and pretty badly servered recently? and BTW can anyone tell me what is the possibility that a so-called new device from Apple has same problem.
Well, guess this might be my last Apple device...Hi wjosten,
Actually what ****** me off was the attitude from the genius here. I have my iPhone 4 repaired 3 times and 2 of which is replacing the main board. And finally they provided me a new 4S and I appreciate that. However, this time according to their words, seems it was ME who cos all these ****. And finally they agreed to check and confirm the issue for me after I argued with them. I don't think everyone is ok for that.
Yep the world is not perfect. I am, even not so much any more, an apple fan. But this time my patience had been gone really. -
What are the objects that support variables?
What are the objects that support variables?
Using Variables: The Variable Wizard and the Variable Editor
Definition
Variables are parameters of a query that you defined in the Query Designer and that are filled with values when you execute the query or Web application. They serve as a store for characteristic values, hierarchies, hierarchy nodes, texts and formula elements, and can be processed in different ways.
The processing type determines how a variable is filled with a value for the runtime of the query or Web application.
There are different types of variables depending on the object for which you want to define variables. These types specify where you can use the variables.
Variables are reusable objects. This means that when you define a variable for a query in the Query Designer, this variable can be used in all other queries. Variables are not dependent on the InfoProvider, only on the InfoObject. A variable that you define for an InfoObject is available in all InfoProviders that use this InfoObject.
Use
Variables enable you to customize queries flexibly (parameterize the query) possible. If you use variables in the Query Designer, do not select any fixed characteristic values, hierarchies, hierarchy nodes, texts, or formula elements. Instead, set up variables as place holders. These are then filled with values when the query is running (when you insert the query into a workbook, when you refresh the workbook or when you execute the query on the Web. You can use one query definition as the foundation for many different queries if you use variables.
You want to create one query for all the people responsible for customer groups, who each only evaluate the data for one customer group. In the Query Designer, you insert a variable for the characteristic u2018customer groupu2019. Just before the query is executed, decide for which customer group(s) you want the query to apply to.
There are two tools in the Query Designer for designing and changing variables.
The variable wizard takes you step-by-step through the process of defining a variable. Each individual step is context-sensitive and is adjusted according to the combination of variable and processing types used. This means that the variable wizard only offers the selection options that are permitted for that combination of variable and processing types. For more information, see Defining Variables with the Variable Wizard.
The variable editor dialog box offers all of the selection options for changing an existing variable. The individual fields in the dialog box show the settings affected in the variable. You can change these settings here. If you want to make the changes using a step-by-step process with explanatory texts, you can jump to the variable wizard using . For more information, see Changing Variables in the Variable Editor.
Integration
The variable wizard and the variable editor are functions in the Query Designer and are context-sensitive.
In principle, the two dialog boxes appear wherever you can enter constants (that is, values) in input fields. One of these input fields is the Entry of Variables checkbox. If you select this option, the following options for using a variable appear, instead of a fixed value:
· The variables that are available appear in the dropdown box for the input field. You can select a variable from the dropdown box.
· The symbol Change Variable appears next to the Entry of Variables checkbox. You can change the variable using . The Variable Editor dialog box appears.
· The symbol New Variable appears next to the Entry of Variables checkbox. Choose if you want to create a new variable. The Variable Wizard dialog box appears.
By way of an example, when defining conditions for the value limit of the condition, you can not only enter fixed values but also formula variables. Mark the Entry of Variables checkbox and you can then use the options described above. The settings are context-sensitive so that the formula variables that only those formula variables that are available appear in the dropdown box. The variable wizard is set up automatically in the same way for entering formula variables.
You can also get to the variable wizard and the variable editor from the context menu of those objects for whose values you can define variable placeholders. From the context menu, choose New Variable. The SAP BW Variables Wizard appears. In the context menu for variables that have already been defined, you can choose Edit. The SAP BW Variables Editor appears.
In the InfoProvider objects dialog box, you select a characteristic (for example, Order) and from the context menu, choose New Variable. You reach the variable wizard, which is already set up for you to enter a characteristic value variable.
In the InfoProvider objects dialog box, you select a characteristic value variable and from the context menu, choose Edit. You reach the variable editor where you see all of the settings for the variable. You can make changes to the variables here.
Variable Types
Definition
The type of variable being used. This determines the object that the variable represents as a placeholder for a concrete value.
Structure
There are different types of variables depending on the object for which you want to define variables. These types specify where you can use the variables.
· Characteristic Value Variables
Characteristic value variables represent characteristic values and can be used wherever characteristic values are used.
If you restrict characteristics to specific characteristic values, you can also use characteristic value variables. See, Restricting Characteristics.
· Hierarchy Variables
Hierarchy variables represent hierarchies and can be used wherever hierarchies can be selected.
If you restrict characteristics to specific hierarchies or select presentation hierarchies, you can also use hierarchy variables. See Selecting Hierarchies
· Hierarchy Node Variables
Hierarchy node variables represent a node in a hierarchy and can be used wherever hierarchy nodes are used.
If you restrict characteristics to specific hierarchy nodes, you can also use hierarchy node variables. See Restricting Characteristics: Hierarchies
· Text Variables
Text variables represent a text and can be used in descriptions of queries, calculated key figures and structural components.
You can use text variables in the description of calculated key figures, restricted key figures, selections and formulas when you create them. See Defining Calculated Key Figures, Defining Restricted Key Figures, Defining Selections, and Defining Formulas.
You can change the descriptions in the properties dialog box. See Query Properties Calculated Key Figure Properties Restricted Key Figure Properties, and Selection/Formula Properties.
· Formula Variables
Formula variables represent numerical values and can be used in formulas. See Defining Formulas.
In addition, numerical values are used for selecting exceptions and conditions and you can also use formula variables here. See Defining Exceptions and Defining Conditions
You can use a formula variable for the interest rate in order to process the current interest rate, after you have executed the query or Web application.
http://help.sap.com/saphelpnw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm_ -
What is the portal that comes with webcenter suite 11g?
Hello,
What is the portal that comes with webcenter suite 11g?
How to retrieve the content from UCM using this portal?
-ScottScott,
The JCR adpater can be configured against Oracle Content Server(UCM), file system and Oracle Portal. This gives you only the read feature on the repository. However the web center frame work also provides you the Document Library Task flows with both Read/Write capabilities and other capabilities like recent documents, search etc. The task flows can also customized to suit your UI requirements as well. In addition to this there is a content presenter Task flow available where Business Users can display formatted content from UCM on web center page. This is similar to the content presenter portlet available inside WLP.
Regards
Vijay -
What are the accounts that will hit while doing subcontracting process
What are the accounts that will hit while doing subcontracting process?
Hi Raj,
In Case of Sub contract
While doing Transfer Posting (Providing material to vendor) in MB1B or ME2O only Material document will be generated. No Accounting Document will be generated.
While Receiving the Finished / Semifinished material both Material and Accounting documents will get generated and the accounting entries will be as under
1. Stock Account (finished Account) BSX - Debits
2. GR/IR clearing Account WRX - Credits
3. Change in Stock Account BSV - Credits
4. Processing Charges/Sub Contract Charges FRL - Debits
5. Stock Account (Raw Material) BSX - Credits
6. consumption from stock of material provided to vendor GBB(VBO) - Debits
bye
Sridhar Thota -
What r the conditions that u hav to check for automatic invoice split ( fro
what r the conditions that u hav to check for automatic invoice split ( from order to proforma invoice)
You can find out the exact fields which lead to invoice split in the Data VBRK/VBRP field of copy control between the order and the invoice type at item category level.
Find out this routine.
Go to VOFM tcode and Data transfer-----Billing documents
Here you can see the routine. See the code behind this routine. This will give you the exact criteria used for invoice split in your specific case.
By default,
It is payer, payment terms, incoterms, Billing date
Hope this helps.
Reward if this helps. -
my ipad mini has been stolen and i have activated the find my iphone to lock. now it is only a wifi device so what are the chances that a person can get hold of it and log onto wifi without the password of my device to unlock. does that not make the app rather less useful as i have to hope that the person is apt enough to log onto the internet but not enough to erase it and start afresh. is it possible to find my device even afte someone has erased it?
"Losing your iPhone feels lousy. Thankfully, iCloud can help you get it back. But if it looks like that’s not going to happen, new Find My iPhone features in iOS 7 make it harder for anyone who’s not you to use or sell your device. Now turning off Find My iPhone or erasing your device requires your Apple ID and password. Find My iPhone can also continue to display a custom message, even after your device is erased. And your Apple ID and password are required before anyone can reactivate it."
http://www.apple.com/icloud/features/#fmip -
What are the entities that can be re-used in different servers, SI App, SI instance? And how?
Greetings,
What are the entities that can be re-used in different servers, SI App, SI instance? And how?
e.g. can I use a deployed IQStreamable@app1 into app2?
can I use a deployed observable/app1/siInstance1/Server1 into another query/app3/siInstance3/server2?
On the presentation titled "04 – Installing, Deploying and Maintaining the SQL Server 2008 R2 StreamInsight Runtime Engine" with file name SQL10R2UPD05-DECK-04.pptx on ecn.channel9.msdn.com/o9/learn/SQL2008R2TrainingKit/Presentations/SQL10R2UPD05-DECK-04/SQL10R2UPD05-DECK-04.pptx
It is mentioned one of the deployment option is "Deployment: Standalone Server"
and it mention the following:
"Use this option for the following scenarios:
- Metadata objects need to be shared between applications
- Event Types
- Adapter Types
- Query Templates
- A data source registered with the server provides an event stream for another existing application"
Could you please provide good example that explain the above statement?
Cheers, MuhammadFirst, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful. -
What's the chance that I'm infected now?
This was recently sent to me through skype: skype:?xxxxxxxx&pack3t=0x00000090x00000090x00000090x00000090x00000090x00000090x00000090oafgYrTlijtlwe991sevensd2hdtlTJzKhdV991M2TJzKhdV993ygSCtlev0lutionM2mYygSC000d0a_exe
under the guise of a youtube url. it was Hyperlinked through skype somehow. here's a screenshot of the hyperlinked url + actual url.
What are the chances that this is Not a hoax/fake malicious attack, and that by clicking the above url in skype, you will be infected with -something-?You have a corrupted user agent that identifies you as Firefox/1.5.0.1
*Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.8.0.1) Gecko/20060111 Firefox/1.5.0.1
See:
*https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default -
The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?
If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
I have read that the battery can swell and that would put pressure on the trackpad.
Maybe you are looking for
-
My I phone 3 helded a charge much longer. does anyone know why these don't. I shut the apps. any other suggestions?
-
Personal File Sharing won't be turned on anymore
Under the Sharing System Preference, the Personal File Sharing will not be turned on anymore. When I select it, "File Sharing staring up . . ." message comes up, but it stays like that forever. Because of this problem, I can not share my files with o
-
When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back. The problem occurs in both MS Word 2011 and Pages. Any idea of how to solve this annoying problem will be much appreciated. System 10.
-
What is the 4M0T/4/40000002: Exhaust-0 error?
I know that something is wrong with my computer lately because when I try to watch a video, or using skype, or media applications and programs, my computer starts freezing and the pointer moves really slow...I did the hardware test and it said that m
-
Focusing a desired field on hitting enter - af:table
Hi, I'm trying to implement the following use-case. Resources(name, description, is_rate_based, rate, quantity, cost) table stores the details of two types of resources - rate based and non-rate based. This data needs to be shown in UI as a click-to-