What is the matter with the framerate on Tiger?

I have dual 2.7 and plenty of Ram and this thing and have 10.4.2 installed. iChat AV is supposed to give me 30 fps at least in video preview. I don't mind the videochats, it is due to bandwidth limits, but in video preview, there is no bandwidth, still I don't get 30 fps video. The picture is definitely around 15 fps, it's not smooth like 30 fps. When I try to record video in iMovie, it's the same. Never 30 fps. Is this about Tiger? I never used iSight with Panther. Or is it about quicktime 7? What's the matter with this?

Here are a couple of ideas, iBug.
iSight will not deliver the full 30 fps frame rate without adequate light. See the Improving Your iSight Picture FAQ for more on this.
QuickTime, a good 10.4.2 Combo Update, and several other common issues can contribute to problems. If you have not already seen this, try Help for iChat AV 3 Problems for trouble shooting suggestions and some things you can try.

Similar Messages

Trying to set up a linksys router but the cd says it works with OSX 10.6 and later. I am currently running the newest version of mountain lion.... what is the matter with this OSX update needed?

trying to set up a linksys router but the cd says it works with OSX 10.6 and later. I am currently running the newest version of mountain lion.... what is the matter with this OSX update needed?

Your install disk must look like this
and not like this.
Those gray disks are machine specific and will only work with model of Mac that they shipped with.

What is the matter with 3.1????????!

Since the update, my battery is sooooooooo low! Please contact me, I can't use my iPhone as I should be! What is the matter with this update??????

ve the same problem...
watch this link
http://www.theiphoneblog.com/2009/09/20/apple-seeking-info-iphone-31-users-repor ting-poor-battery-life/
ive switched off 3G, WLAN, Bluetooth... now its fine

What's the matter with SSL?

what's the matter with SSL?
Anyone would help me?
Thank you in advance.
The following is the console output:
Starting WebLogic Server ....
<2001-9-4 ÏÂÎç03Ê±56·Ö34Ãë> <Notice> <Management> <Loading configuration
file .\config\tbcn\config.xml ...>
The WebLogic Server did not start up properly.
Exception raised:
eblogic.management.configuration.ConfigurationException: - with nested
exception:
[weblogic.security.internal.encryption.EncryptionServiceException - with
nested exception:
[COM.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid
pad byte.]]
COM.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid
pad byte.
at
COM.rsa.jsafe.JA_PKCS5Padding.performUnpadding(JA_PKCS5Padding.java)
at COM.rsa.jsafe.JG_BlockCipher.decryptFinal(JG_BlockCipher.java)
at
weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptByte
s(JSafeEncryptionServiceImpl.java:68)
at
weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptStri
ng(JSafeEncryptionServiceImpl.java:94)
at
weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearO
rEncryptedService.java:53)
at
weblogic.management.internal.EncryptedData.decrypt(EncryptedData.java:45)
at
weblogic.management.internal.xml.ConfigurationParser$ConfigurationHandler.pa
rseMBeanAttributes(ConfigurationParser.java:306)
at
weblogic.management.internal.xml.ConfigurationParser$ConfigurationHandler.st
artElement(ConfigurationParser.java:185)
at
weblogic.apache.xerces.parsers.SAXParser.startElement(SAXParser.java:1340)
at
weblogic.apache.xerces.validators.common.XMLValidator.callStartElement(XMLVa
lidator.java:1183)
at
weblogic.apache.xerces.framework.XMLDocumentScanner.scanElement(XMLDocumentS
canner.java:1876)
at
weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispat
ch(XMLDocumentScanner.java:1252)
at
weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentSca
nner.java:381)
at
weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:967)
at
weblogic.management.internal.xml.ConfigurationParser.parse(ConfigurationPars
er.java:104)
at
weblogic.management.internal.xml.XmlFileRepository.loadDomain(XmlFileReposit
ory.java:261)
at
weblogic.management.internal.xml.XmlFileRepository.loadDomain(XmlFileReposit
ory.java:223)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:606)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
90)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:350)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy1.loadDomain(Unknown Source)
at
weblogic.management.AdminServer.configureFromRepository(AdminServer.java:186
at weblogic.management.AdminServer.configure(AdminServer.java:171)
at weblogic.management.Admin.initialize(Admin.java:233)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:354)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
--------------- nested within: ------------------
weblogic.security.internal.encryption.EncryptionServiceException - with
nested exception:
[COM.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid
pad byte.]
at
weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptByte
s(JSafeEncryptionServiceImpl.java:78)
at
weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptStri
ng(JSafeEncryptionServiceImpl.java:94)
at
weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearO
rEncryptedService.java:53)
at
weblogic.management.internal.EncryptedData.decrypt(EncryptedData.java:45)
at
weblogic.management.internal.xml.ConfigurationParser$ConfigurationHandler.pa
rseMBeanAttributes(ConfigurationParser.java:306)
at
weblogic.management.internal.xml.ConfigurationParser$ConfigurationHandler.st
artElement(ConfigurationParser.java:185)
at
weblogic.apache.xerces.parsers.SAXParser.startElement(SAXParser.java:1340)
at
weblogic.apache.xerces.validators.common.XMLValidator.callStartElement(XMLVa
lidator.java:1183)
at
weblogic.apache.xerces.framework.XMLDocumentScanner.scanElement(XMLDocumentS
canner.java:1876)
at
weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispat
ch(XMLDocumentScanner.java:1252)
at
weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentSca
nner.java:381)
at
weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:967)
at
weblogic.management.internal.xml.ConfigurationParser.parse(ConfigurationPars
er.java:104)
at
weblogic.management.internal.xml.XmlFileRepository.loadDomain(XmlFileReposit
ory.java:261)
at
weblogic.management.internal.xml.XmlFileRepository.loadDomain(XmlFileReposit
ory.java:223)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:606)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
90)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:350)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy1.loadDomain(Unknown Source)
at
weblogic.management.AdminServer.configureFromRepository(AdminServer.java:186
at weblogic.management.AdminServer.configure(AdminServer.java:171)
at weblogic.management.Admin.initialize(Admin.java:233)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:354)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
--------------- nested within: ------------------
weblogic.management.configuration.ConfigurationException: - with nested
exception:
[weblogic.security.internal.encryption.EncryptionServiceException - with
nested exception:
[COM.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid
pad byte.]]
at
weblogic.management.internal.xml.ConfigurationParser$ConfigurationHandler.pa
rseMBeanAttributes(ConfigurationParser.java:313)
at
weblogic.management.internal.xml.ConfigurationParser$ConfigurationHandler.st
artElement(ConfigurationParser.java:185)
at
weblogic.apache.xerces.parsers.SAXParser.startElement(SAXParser.java:1340)
at
weblogic.apache.xerces.validators.common.XMLValidator.callStartElement(XMLVa
lidator.java:1183)
at
weblogic.apache.xerces.framework.XMLDocumentScanner.scanElement(XMLDocumentS
canner.java:1876)
at
weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispat
ch(XMLDocumentScanner.java:1252)
at
weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentSca
nner.java:381)
at
weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:967)
at
weblogic.management.internal.xml.ConfigurationParser.parse(ConfigurationPars
er.java:104)
at
weblogic.management.internal.xml.XmlFileRepository.loadDomain(XmlFileReposit
ory.java:261)
at
weblogic.management.internal.xml.XmlFileRepository.loadDomain(XmlFileReposit
ory.java:223)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:606)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
90)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:350)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:444)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:185)
at $Proxy1.loadDomain(Unknown Source)
at
weblogic.management.AdminServer.configureFromRepository(AdminServer.java:186
at weblogic.management.AdminServer.configure(AdminServer.java:171)
at weblogic.management.Admin.initialize(Admin.java:233)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:354)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
C:\bea\wlserver6.1>goto finish

I have been interested in computers for a long time. My husband and I had one of the first TRS-80 computers from Radio Shack, and we would have likely followed the Windows path, except a blessed event intervened and our interest in computers was sidetracked by raising
a toddler.
I had my first experience with a Mac (a Performa 630 CD) in December of 1994. Our 7-year-old son was using Macs at school, and was as interested in computers as we were. We had been out of the game for a long while by this time, so thought it was wise to buy a computer one of the three of us (7-year-old Zach) could use.
I thought, "Well, by next year, I'll learn enough to do the income taxes on it." In January, I saw Zach playing around with Quicken, and I saw how easy it would be to do our taxes with it. I had them done faster than I'd ever managed it before.
I guess that's my big first impression.
I told Zach he'd be sorry about wanting a Mac because I knew the gaming thing was on the horizon. Sure enough, when he hit his teens, all his friends were gaming on Windows boxes, and he now uses XP. He is in his second year of college, a Computer Science major, and he and his dorm-mates have Vista available as a free download on the college server. Not one of them has installed it. I don't see how Microsoft thinks they can sell it if they can't give it away.
I tried Windows 98 and Windows XP, and my reaction was "Why on earth am I banging my head against THIS wall, when my Mac does everything I want to do?" And back I went to my Mac.
With Intel processors and Parallels and Boot Camp, Zachary may come back to the fold. His next computer may be a Mac.

I just finished downloading and attempting the install of ios 7 on my iPhone 5. I'm using the newest version of iTunes. And now, I'm stuck at the screen with the iTunes logo and the plug. But no matter what recovery mode wont work

I just finished downloading and attempting the install of ios 7 on my iPhone 5. I'm using the newest version of iTunes.
And now, I'm stuck at the screen with the iTunes logo and the plug. But no matter how many times I try, recovery mode will not work. My phone is currently useless unless I can figure this out.

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

What do i need to connect my mac book pro to the tv with the thunderbolt on the mac to hdmi? I have the newest macbook pro. I'm wanting to have the best picture I can get from my 1080p tv. thanks

what do i need to connect my mac book pro to the tv with the mac's thunderbolt port to hdmi? I have the newest macbook pro. I'm wanting to have the best picture I can get from my 1080p tv. thanks

Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
Thank everybody, especialy Zyriab, ne was the closest.
High regards to everybody

What can be done with the fingerprint reader?

I am trying to figure out simply what I can do with the fingerprint reader on the T400. I understand how to use it to log into the computer. My main question is whether or not I can use the fingerprint reader in the following contexts, and if so how.
1a) To log into internet password protected websites. When I use IE, the password manager pops up and prompts me to save a password. If I save it, I can return to that website and it automatically will enter the login information and password for me. I want to know whether you can have password manager (or another program) prompt the user for the fingerprint and then submit the login information. That way the information is protected each time I log in, but I do not need to enter log in information each time, only a fingerprint.
1b) If this is possible in IE8, I would like to know if it is possible in Firefox 3, in which password manager does not pop up.
2) Can it be used to log into MS Outlook.
3) Can it be used to lock documents in MS Word.
I much appreciate any information letting me know if these can be done, and if so, how to do them. Thank you very much for your help!
J
Message Edited by lenova on 09-07-2008 09:13 PM

After playing with it for a while I figured out at least questions 1a) and 1b). For anyone else who has the same questions:
1a) Have your browser save the password using Lenovo's Password Manager. Then open password manager and open that item. Click the advanced tab and change the security level to custom. Click "Customize Security Policy" and select "Protect with a Fingerprint."
1b) Lenovo has a patch to synch Password Manager with firefox 3. It can be found here and is much easier than the manual fixes found on this forum.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70132
I am still looking for help with 3) and 4), particurally 3). Please let me know if you have any ideas. Thank you very much!!

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
-> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
* Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
* Change value from 0 to whatever you want over 0 (Default value is 50)
* click OK
-> Close the '''about:config''' tab and then Restart Firefox.
See this post:
* https://support.mozilla.com/en-US/questions/860894#answer-229574
Check and tell if its working.

I am running lion now and I am not able to safe my emails to the computer with the attachments. what's wrong?

I am running lion now and I am not able to safe my emails to the computer with the attachments. what's wrong?

Try using these settings: http://support.apple.com/kb/HT4864.

What monitors are compatible with the Mac mini?

What monitors are compatible with the Mac mini?

Is this the new Mini?
Most any Thunderbolt, HDMI, DVI, or VGA monitor will work with the new Mini, though many problems exist with the HDMI port it seems.
Video Card:
HD Graphics 4000
VRAM Type:
Integrated
Details:
This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system.
Standard VRAM:
512 MB*
Maximum VRAM:
512 MB*
Display Support:
Dual Displays
Resolution Support:
1920x1200*
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html

What do I do with the Beta 10.9.3 program I've been using these past several weeks, now that 10.9.3 is out and downloaded.......I still have 'feedback assistant' in my dock........are there files I need to do something with ??? thanx

What do I do with the Beta 10.9.3 program I've been using these past several weeks, now that 10.9.3 is out and downloaded.......I still have 'feedback assistant' in my dock........are there files I need to do something with ??? thanx..............75 yrs old and still swimmin' upstream.........

from : OS X Beta Seed Program FAQ
How do I get a shipping version of OS X back on my Mac?
To get a shipping release of OS X on your Mac, you can simply install the final version of the software you are testing when it appears in Software Update.
How do I leave the OS X Beta Seed Program?
To leave the program, visit the Leave Program page and follow the instructions to remove your Apple ID and your computers from the OS X Beta Seed Program. This will stop pre-release updates from appearing in the Mac App Store on your computers.
You only need to do more than you already have, if you'd rather not see future pre-release updates.

After updating to iOS 5.0.1 my iphone 4 is frozen on the screen with the apple logo and a progress bar under it. What should i do?

After updating to iOS 5.0.1 my iphone 4 is frozen on the screen with the apple logo and the progress bar under it. Held the power and home button, the phone shut off, and restarted the progress. If i try to turn the phone on, it keeps telling me to connect to iTunes. Once I do, it asks me to restore, i click restore, but it keeps on freezing at the screen. What is the problem? Error 1603 comes up. Followed the link to apple's page but nothing that was said there worked.

See Here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808

My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

My iPad 4 wifi 3G keeps charging slowly takes half a hour to get to 15% when plug into the wall with the plug and the lead what come with the iPad just wondering as I think some thing is wrong with the iPad

Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight. Do NOT use an iPod/iPhone charger. Do NOT use a computer's USB port. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know. If the above test does, in fact, indicate a problem, read this.
Also, according to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

IMac Seagate HD replacement - What do Apple do with the old hard drives?

Hi
A relative has a 2009 iMac and his 1TB Seagate hard drive is covered by the replacement programme. He is concerned what Apple will do with the hard drive when it is returned to them as he does not want any to access his personal items (like docs, photos and emails etc).
He is currently using ML and has everything backed up to an external hd.
He plans to reload Snow Leopard which originally came with his iMac. Using the SL disc, it will give him the option before installing - in Disk Utility to wipe the HD (Gutmann Theory) x 35 times so a very secure wipe. Is this over the top as going to take days to do this to a 1TB drive. Are there any better ways to do this.
We have an Apple store and Apple Premiem Reseller and Support Centre, but the reseller has a faster turnaround for repair. Does anyone know what Apple do with faulty hard drives other than bin them?
Thanks in advance.
Matt

AppleMacCider wrote:
Does anyone know why Apple have removed the 35 x wipe from Lion and Mountain Lion other than it's an overkill.
Gutmann algorithm 35-pass secure erase is not available as an option from the GUI, but is still available from command line aka Terminal.
diskutil secureErase
Usage: diskutil secureErase [freespace] level MountPoint|DiskIdentifier|DeviceNode
Securely erases either a whole disk or a volume's freespace.
Level should be one of the following:
        0 - Single-pass zeros.
        1 - Single-pass random numbers.
        2 - US DoD 7-pass secure erase.
        3 - Gutmann algorithm 35-pass secure erase.
        4 - US DoE 3-pass secure erase.
Ownership of the affected disk is required.
Note: Level 2, 3, or 4 secure erases can take an extremely long time.

What's the Deal with the iPhone Backup? Where Does It Back Up to?

When my iPhone does its backup thing (and gee I wish I could turn that off permanently but nothing seems to stick in the preferences... have to stop it manually in iTunes each time... anyway...), where does the backup reside? It takes a couple of hours to do a backup, so I'd think there was a lot of actual content being moved to my Mac. But there's 14GB of content on my iPhone and my hard drive isn't losing 14GB of storage space... not even 100MB from what I can tell!
So what's really happening during a "backup"? If I wipe the content off my iPhone with a restore, where will the backup content come from?

On a Mac, the iPhone's backup file is stored at Home > Library > Application Support > MobileSync > Backup.
The iPhone's backup stores data such as most iPhone settings, SMS messages, email account settings, notes, recent calls, call favorites, 3rd party applications or some 3rd party applications and any data created/stored by a 3rd party application, and photos captured by your iPhone.
The backup does not store iTunes content, contact information, bookmarks, or photos transferred from your computer to your iPhone. This data should be available on your computer.
Basically the iPhone's backup stores all data not included with the sync process.
When performing a Restore with iTunes, the options are to restore your iPhone from your iPhone's backup, or as a new iPhone or not from your iPhone's backup.
If you constantly cancel the backup process, this may cause the backup to become corrupt and if you never allow it to finish, you won't be able to restore what should be saved with the backup.
How many 3rd party applications do you have installed and regularly use that create/store data?
And do you have a number of photos that were captured by your iPhone available that have not been imported by your computer and then erased from your iPhone as with any other digital camera?
If so and you regularly capture more photos, these are included with the backup.

What is the matter with the framerate on Tiger?

Similar Messages

Maybe you are looking for