What is the max. bandwith limitation on cisco 2621XM router

Hi all,
I am new to this forum. The need to learn more about cisco has driven me to this forum. The topics are very helpful.
As per the datasheet provided on Cisco site, 2621XM supports
NM- 1
AIM- 1
WIC - 2
FE - 2
Performace - 30 kpps.
I would like to know the maximum bandwidth it can take.
regds,
Mahesh

Mahesh,
there is no way to go from PPS to bandwidth withouth further hypotesys. The reason way I am saying so is because packet size varies and even switching methods varies so the router might be faster tha expected. I suppose that those 30 KPPS are process switched (which means the router CPU is interrupted to look up the routing table, make a routing decision and queue the packet).
So enabling things like CEF (cisco express forwarding) only the first packet generates an interrupt the rest of the flow will not.
I suggest a basic reading on the subject here:
http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1831/products_tech_note09186a00800a7306.shtml
Cheers
Fabio

Similar Messages

  • What is the max sample clock using the Shielded Single-Ended Flying-Lead Cable

    Hi
    What are the max practical limits for the sample clock using the Shielded Single-Ended Flying-Lead Cable?
    I am playing with the Labview embedded example "Dynamic Generation and Acquisition Source Synchronou.vi" using the Shielded Single-Ended Flying-Lead Cable and the PXIe-6556.
    This example write in the channels 0-7 and read in the channels 7-15.
    It also export the sample clock and data active event so we have a "Source Synchronous"
    I change the original example to set the input impedance to 50ohm and VH and VL voltatages.Write 3.3V - 0V and read 0.5V 0.3V.
    The problem is the signal integrity at higher frequencies. Please see the picture attached.
    Sample clock 30MHz
    50MHz
    70MHz
    90MHz
    Error: PLL could not phase-lock to the external reference clock.

    Hello engfpe,
    According Hardware manual the Maximum Sample Clock rate is 200 MHz.
    http://www.ni.com/datasheet/pdf/en/ds-421
    Is not clear for me if your error message was received on LabVIEW or on your Agilent Scope, and I don´t know your Agilent Scopes specifications. Neither I don´t know what exactly you are trying to generate, maybe if yo ucan clarify more your application and your issue I can help you more.
    Best regards,

  • What is the max size of HDD I can use in my dc7600 CMT

    I am using an HP dc7600 CMT which is working fine after upgrading to a Samsung 128GB SSD, Intel Pentium D 3.4 GHz, 4GB RAM, and an AMD Radeon HD 6450. I am running Win 8.1 Pro x64, with the most recent upgrade, and have absolutely no problems. I now want to add a second internal HDD, and wonder what is the max size  I can go to. Can I go to 2TB, or am I limited to a lower figure? 1TB? 500GB? 250GB?
    Will be glad for some help here, especially if it has been actually tried in practice.
    Thanks in advance.
    Best regards
    This question was solved.
    View Solution.

    You're very welcome.
    Yes, they are very nice machines. 
    What a jump in performance when I swapped out the Pentium 4 620 mine had, for the PD 945, and tossed in 4 GB of memory.
    That box will also run the Radeon HD 6570 with no problem too, which is what I put in mine.
    The downside of that model is that there are no settings for ahci or raid.
    I own or have owned every CMT since the d510 with the exception of the dc7900.
    My main PC is now the 8200 Elite CMT which I installed W8.1 on.
    It has an i7-2600 processor and 32 GB of memory, 1 TB SATA III hard drive.
    I threw in a Radeon HD 6670 in that one.
    Best Regards,
    Paul

  • What is the max limit

    I have written a file parser to insert a CSV directly into a table. The CSV contains 2 fields that would be considered memo fields in Access.
    Now I get this Error: (ORA-06502: PL/SQL: numeric or value error ) when I run this section of code:
    DBMS_LOB.converttoclob (v_text_file, v_binary_file, DBMS_LOB.lobmaxsize, v_dest_offset, v_src_offset, DBMS_LOB.default_csid, v_lang_context, v_warning); The error I believe is relating to this section of the code: DBMS_LOB.lobmaxsize .
    My questions are:
    What is the max size of DBMS_LOB?
    And has anyone had any success inserting/parsing a field that contains 10000+ characters with Access embedded special characters?

    Hello,
    " Only problem that I have with OMWB is that it converts on memo field into a clob but the other into a varchar2(255) and truncates the data"Are you talking from experience? The varchar2 limitation doesn't make sense to me. I didn't use the tool my self, but I remember reading that the Oracle model can be changed. Maybe you should check the documentation more carefully. You can also try to open a new thread, with a specific subject on Access migration. That can draw the attention of the experienced posters.
    " Hopefully the APEX team can come up with something about converting/recognizing Access special characters in the next version."From what I'm reading about ApEx 3.0 the last few days, it seems it will include a dedicated tool for Access migration.
    Regards,
    Arie.

  • What's the max number of columns a table can have on 32 bit OS & 64 bit OS

    What is the max number of columns a table can have on 32 bit OS & 64 bit OS ?
    Edited by: sameer naik on 02-Jul-2010 02:11

    For TimesTen 7.0 and 11.2.1 releases the limit on the number of columns per table is 1000 for both 32 and 64 bit TimesTen. This can be found in the documentation under System Limits.
    Regards,
    Chris

  • HT201342 what is the max size of attachment that possible to send with icloud email?

    what is the max size of attachment that possible to send with icloud email?

    Welcome to the Apple Community.
    There isn't an attachment size limit as such, the limit applies to the entire message including all attachments, which is 20 MB.
    if you are using a mail application to send emails (ie not via a web browser) you may be subject to smaller limits imposed by your own ISP.

  • Export/Import-SPSIte :- What is the max size limit that can be moved using this command??

    Export/Import-SPSIte :- What is the max size that can be moved using this command??

    I assume you ment Export-SPWeb not Export-SPSite command.
    There is no known limitations in file size, except the compression file size that is set to 24MB by default. If you exceed 24MB, the cmp file will be splitted into several files. You can change the default 24MB value up to 1024MB, using the -compressionsize
    parameter.

  • HP Pavilion DV2700 Special Edition what is the max ram for this model laptop?

    HP Pavilion DV2700 VERVE Special Edition
    Operating System  Windows Vista 64 bit Service Pack 2
    Year made 2007 
    Processor AMD Turion 64 X2 TL- 60 2.0 GHz
    Current Ram 4GB
    would like to know what is the max ram 
    PS 
    Can i install and other Processor or is this and intergrated one with the motherboard.? 
    In Advance thank you for your time to look at my question
    Indarktimes
    This question was solved.
    View Solution.

    Hi
    Please find the link given below for your model off unit Max Memory supported is 4GB.
    http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06a/12139188-78299199-78299212-78299212-78299212-81135202....
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • What is the max. count of internal worker-threads in B1iSN 88?

    Hi Experts,
    We have an installation of B1iSN 88 with an ECC 6.0 and 54 SAP Business One installation. The Hardware is 8 Core multi-threads processor. 32GB Memory. Now we have a problem with the queuing of Events. What we have found is that the configuration of the internal worker-threads is set to -1(please see below for the settings). We change the settings to xcl.threads=20 and it improves the queuing. My question is what is the max. count of internal worker-threads per core? so that we can know how many worker will set and if we need to upgrade the CPU to 16 Core..
    # The max. count of internal worker-threads afforded for the internal Scheduler (defaults to 1)
    # The value of 0 means that there is no limit (what in general should not be set up).
    # A negative value means the count of threads per available processor
    xcl.threads=-1
    Regards,
    Wilson

    You're very welcome.
    Yes, they are very nice machines. 
    What a jump in performance when I swapped out the Pentium 4 620 mine had, for the PD 945, and tossed in 4 GB of memory.
    That box will also run the Radeon HD 6570 with no problem too, which is what I put in mine.
    The downside of that model is that there are no settings for ahci or raid.
    I own or have owned every CMT since the d510 with the exception of the dc7900.
    My main PC is now the 8200 Elite CMT which I installed W8.1 on.
    It has an i7-2600 processor and 32 GB of memory, 1 TB SATA III hard drive.
    I threw in a Radeon HD 6670 in that one.
    Best Regards,
    Paul

  • We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

    we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
    Appreciate your support and if possible , how to do this?

    If you want to work with Mac OS X, you need one computer per simultaneous user.
    What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
    Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

  • I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?

    I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?

    Maximum Memory     16 GB (Actual) 8 GB (Apple)
    Memory Slots     2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

  • I am looking to get a new 13 inch mac book pro, what is the max RAM that I can install.  I know configured from Apple is 8 GB, but can I put 16 GB after?

    i am looking to get a new 13 inch mac book pro, what is the max RAM that I can install.  I know configured from Apple is 8 GB, but can I put 16 GB after?

    Yes, you can install 16GB in your new macbook pro.
    Go here (OWC) and here (Crucial) to give you options on how much you want to spend.
    Good luck.

  • What is the max memory a 2nd Gen iMac (2008) can run and where can I buy it?

    What is the max memory a 2nd Gen iMac (2008) can support and if it is more than 2GB, where can you purchase?

    Go to Crucial.com or OWC, you will get good advice and good memory suitable for Macs.
    http://www.crucial.com/uk/index.aspx?gclid=CJyMwKGJuL0CFWfLtAodGXEAMQ&cm_mmc=goo gle-_-uk-_-brand-_-null&ef_id=UzbobwAAAS7VFVy@:20140329153615:s.     Note UK site.
    http://eshop.macsales.com/?utm_source=google&utm_medium=cpc&utm_campaign=adwords &gclid=CNLf77iJuL0CFTCWtAodiFUAVA

  • What is the max file size that a Adapter Engine [J2SE] can handle ?

    We are having a scenario where a 4 GB compressed file needs to be sent across without mapping, I'm trying to explore the possible options to tackle this scenario.
    Some of the options, we are considering :
    - Sending a file from one Adapter Engine [J2SE] to another Adapter Engine [J2SE] bypassing PI. Adapter Logs will be monitored. What is the maximum file size that can be then handled assuming a standard installation ?
    - What is the max file size that Adapter Engine [J2SE] can send through PI without mapping?
    Any help with the above options or with any other possible solutions to handle extremely large file transfers will be much appreciated.

    Hi,
    j2se is not a good option here
    if you have 4gb then you need a copy solution
    a) build an proxy that will just copy the file from sender dest to receiver
    b) build an adapter that will do the same as proxy)
    this way processing of this message will be controlled with SAP PI/XI
    it will be as quick as copy & paste of the 4gb file
    I did the a) for one of the flow for 300 mb and it works perfectly
    Regards,
    Michal Krawczyk

  • What is the max number of hyperlinks supported in a PDF docment?

    What is the max number of hyperlinks supported in a PDF docment?
    How do I find out how many hyperlinks there are in a PDF document?

    I don't think there's a limit to the number of links you can add to a file...
    This code (taken from the reference files) will report the number of links in your file:
    var numLinks=0;
    for ( var p = 0; p < this.numPages; p++)
    var b = this.getPageBox("Crop", p);
    var l = this.getLinks(p, b);
    console.println("Number of Links on page " + p +" is " + l.length);
    numLinks += l.length;
    console.println("Number of Links in Document is " + numLinks);

Maybe you are looking for