What is the max Captivate 5 project size?

What is the max allowed power point presentation size (including audio files and animations), if one wants to import it into captivate 5 and then published seamlessly?

Hi Rick
Thanks for the info, and this is a big problem especially when you import from power point (the one I have is 160 slides complete with 450 MB worth of audio flies!!).
I also noticed that captivate uses a lot of RAM during import (at least 2-3 Gigs).
Any suggestions on how to publish this project or if you know anyone who could help me with this? the alternative is to return Captivate and get my $900 back
Cheers
Sal

Similar Messages

What is the max mp4 file size?

Does anyone know what the max mp4 file size that can be imported into iTunes for sync with ATV is?

RichSolNuv wrote:
I got HandBrake to work. What settings do you recomment for ATV? When I used the Apple Tv setting it worked pretty quick and I could view the file in iTunes, but it would not import into ATV. I got a message saying it was not playable on ATV. The "Normal" setting (h.264) seems to work good. I did a few minutes of a movie and it looks good and works with ATV, but it seems to take a lot longer (hours).
With Handbrake 0.9.1, always select "Apple TV" under the "Presents" column on the right side of the window. When you say it is "not playable on ATV" do you mean by streaming or syncing or both?

What is the Max import file size for Aperture

I'll some times shoot film and get very large scans done as Tiffs or Jpegs. 500MB+ What is the Max that Aperture can manage, or is it only determined by the Mac configuration?

I'm curious to know this as well before upgrading. Hopefully it has been improved in Aperture 3. I know Aperture 2 only supported up to 250MB which was near useless if you'd ever made any significant adjustments and edits in Ps and saved it as a .psd.
All my medium format (digital and film scans) and large format scans give me the maroon "Unsupported Image Format" error while trying to view in Aperture 2.

What is the max hard drive size in an early 2008 MacBook?

I've got an early 2008 black macbook. I want to upgrade from a 250gb hard drive to either a 750gb 7200rpm drive or a 1tb 5200rpm drive. Will either of these work in there? I don't know if there is a maximum hard drive size/rpm that I can put in there. Thank you for your help!

I know these posts were a while ago, but I wanted to check in on your 2008 Macbook. I have the same model and want to do the hard drive update. Is your machine still up and running, or have you moved on?
Thank you!

What is the max size of a zip file with the JDK1.5 ?

Hello everybody,
I'm a french student and for a project, I need to create a zip file, but I don't know in advance the number and the size of files to include in my zip.
I wish to know if someone have the answer to my question : what is the max size of a zip file with the JDK1.5 ? I believe that with the JDK1.3, the limit size of a zip was about 2Go, wasn't ?
Thank you for all answer !
Good day !
PS : sorry for my very poor english ;-)

Here is all I have found for the moment :
...Okay, what about my suggestion of creating your own 10GB file?
Try this:import java.io.File;
import java.io.RandomAccessFile;
import java.nio.ByteBuffer;
import java.nio.channels.FileChannel;
import java.util.Random;
class Main {
    public static void main(String[] args) {
        long start = System.currentTimeMillis();
        int mbs = 1024;
        writeFile("E:/Temp/data/1GB.dat", mbs);
        long end = System.currentTimeMillis();
        System.out.println("Done writing "+mbs+" MB's to disk in "+
                ((end-start)/1000)+" seconds.");
    private static void writeFile(String fileName, int numMegaBytes) {
        try {
            int numBytes = numMegaBytes*1024*1024;
            File file = new File(fileName);
            FileChannel rwChannel =
                    new RandomAccessFile(file, "rw").getChannel();
            ByteBuffer buffer = rwChannel.map(
                    FileChannel.MapMode.READ_WRITE, 0, numBytes);
            Random rand = new Random();
            for(int i = 1; i <= numMegaBytes; i++) {
                for(int j = 1; j <= 1024; j++) {
                    byte[] bytes = new byte[1024];
                    rand.nextBytes(bytes);
                    buffer.put(bytes);
            rwChannel.close();
        } catch(Exception e) {
            e.printStackTrace();
}On my machine it took me 43 seconds to create a 1GB file, so it shouldn't take too long to create your own 10GB. Then try zipping that file.
Good luck.

What is the max size of HDD I can use in my dc7600 CMT

I am using an HP dc7600 CMT which is working fine after upgrading to a Samsung 128GB SSD, Intel Pentium D 3.4 GHz, 4GB RAM, and an AMD Radeon HD 6450. I am running Win 8.1 Pro x64, with the most recent upgrade, and have absolutely no problems. I now want to add a second internal HDD, and wonder what is the max size I can go to. Can I go to 2TB, or am I limited to a lower figure? 1TB? 500GB? 250GB?
Will be glad for some help here, especially if it has been actually tried in practice.
Thanks in advance.
Best regards
This question was solved.
View Solution.

You're very welcome.
Yes, they are very nice machines.
What a jump in performance when I swapped out the Pentium 4 620 mine had, for the PD 945, and tossed in 4 GB of memory.
That box will also run the Radeon HD 6570 with no problem too, which is what I put in mine.
The downside of that model is that there are no settings for ahci or raid.
I own or have owned every CMT since the d510 with the exception of the dc7900.
My main PC is now the 8200 Elite CMT which I installed W8.1 on.
It has an i7-2600 processor and 32 GB of memory, 1 TB SATA III hard drive.
I threw in a Radeon HD 6670 in that one.
Best Regards,
Paul

What is the max file size that a Adapter Engine [J2SE] can handle ?

We are having a scenario where a 4 GB compressed file needs to be sent across without mapping, I'm trying to explore the possible options to tackle this scenario.
Some of the options, we are considering :
- Sending a file from one Adapter Engine [J2SE] to another Adapter Engine [J2SE] bypassing PI. Adapter Logs will be monitored. What is the maximum file size that can be then handled assuming a standard installation ?
- What is the max file size that Adapter Engine [J2SE] can send through PI without mapping?
Any help with the above options or with any other possible solutions to handle extremely large file transfers will be much appreciated.

Hi,
j2se is not a good option here
if you have 4gb then you need a copy solution
a) build an proxy that will just copy the file from sender dest to receiver
b) build an adapter that will do the same as proxy)
this way processing of this message will be controlled with SAP PI/XI
it will be as quick as copy & paste of the 4gb file
I did the a) for one of the flow for 300 mb and it works perfectly
Regards,
Michal Krawczyk

Doing Buffered Event count by using Count Buffered Edges.vi, what is the max buffer size allowed?

I'm currently using Count Buffered Edges.vi to do Buffered Event count with the following settings,
Source : Internal timebase, 100Khz, 10usec for each count
gate : use the function generator to send in a 50Hz signal(for testing purpose only). Period of 0.02sec
the max internal buffer size that i can allocate is only about 100~300. Whenever i change both the internal buffer size and counts to read to a higher value, this vi don't seem to function well. I need to have a buffer size of at least 2000.
1. is it possible to have a buffer size of 2000? what is the problem causing the wrong counter value?
2. also note that the size of max internal buffer varies w
ith the frequency of signal sent to the gate, why is this so? eg: buffer size get smaller as frequency decrease.
3. i'll get funny response and counter value when both the internal buffer size and counts to read are not set to the same. Why is this so? is it a must to set both value the same?
thks and best regards
lyn

Hi,
I have tried the same example, and used a 100Hz signal on the gate. I increased the buffer size to 2000 and I did not get any errors. The buffer size does not get smaller when increasing the frequency of the gate signal; simply, the number of counts gets smaller when the gate frequency becomes larger. The buffer size must be able to contain the number of counts you want to read, otherwise, the VI might not function correctly.
Regards,
RamziH.

Will Result Cache improve the database performance in 11g? what is the max size of Result Cache?

Will Result Cache improve the database performance in 11g? what is the max size of Result Cache?

Thanks for convincing me I really need a new laptop...
SQL> select /*+ result_cache */ count(*) from emp,emp,emp,emp,emp,emp,emp;
COUNT(*)
105413504
Elapsed: 00:00:52.94
SQL> select /*+ result_cache */ count(*) from emp,emp,emp,emp,emp,emp,emp;
COUNT(*)
105413504
Elapsed: 00:00:00.01
SQL> select /*+ result_cache */ count(*) from emp,emp,emp,emp,emp,emp,emp;
COUNT(*)
105413504
Elapsed: 00:00:00.01
SQL> select count(*) from emp,emp,emp,emp,emp,emp,emp;
COUNT(*)
105413504
Elapsed: 00:00:45.08
SQL> select count(*) from emp,emp,emp,emp,emp,emp,emp;
COUNT(*)
105413504
Elapsed: 00:01:16.29
SQL> select count(*) from emp,emp,emp,emp,emp,emp,emp;
COUNT(*)
105413504
Elapsed: 00:01:18.63
Message was edited by: Hoek
The result cache seems to have lagged a bit for the first hintless query..

HT201342 what is the max size of attachment that possible to send with icloud email?

what is the max size of attachment that possible to send with icloud email?

Welcome to the Apple Community.
There isn't an attachment size limit as such, the limit applies to the entire message including all attachments, which is 20 MB.
if you are using a mail application to send emails (ie not via a web browser) you may be subject to smaller limits imposed by your own ISP.

Export/Import-SPSIte :- What is the max size limit that can be moved using this command??

Export/Import-SPSIte :- What is the max size that can be moved using this command??

I assume you ment Export-SPWeb not Export-SPSite command.
There is no known limitations in file size, except the compression file size that is set to 24MB by default. If you exceed 24MB, the cmp file will be splitted into several files. You can change the default 24MB value up to 1024MB, using the -compressionsize
parameter.

What's the max size you can put in an array?

when declaring an array,, i wonder if there's a limit or a maximum length you can use for array?
ex.:
int n[] = new int[what's the max length for this?];
JButton b[] = new JButton[what's the max length for this?];thanks!!!

Theoretically the maximum size of an array will be Integer.MAX_VALUE,
practically it all depends on how much memory you gave to your VM and how
much of that has already been allocated to other objects ...
kind regards,
Jos

I got my first mac and wonder what is the max ram capacity?

This is my first mac and I gotten it for school for my animation and visual effects. Since they like using tutorials that uses a lot of mac commands instead of windows so I am doing this so I can easily follow along. I gotten a Apple iMac MD063L from newegg it is coming with 8gb of ram and just wonder if it can go higher like what is the max it could do? I just want to make sure it can handle programs like Maya, adobe after effects but primarily Maya and related programs. When it comes to rendering a project.

That partial part number relates to 3 different refurbished 27" iMacs at NewEgg. All 3 can be upgraded to 32GB of ram. Only buy ram from either OWC http://eshop.macsales.com/ or Crucial http://www.crucial.com/ and avoid the bargain basement brands sold by other vendors. They're all mid 2011 models I believe.

What is the max limit

I have written a file parser to insert a CSV directly into a table. The CSV contains 2 fields that would be considered memo fields in Access.
Now I get this Error: (ORA-06502: PL/SQL: numeric or value error ) when I run this section of code:
DBMS_LOB.converttoclob (v_text_file, v_binary_file, DBMS_LOB.lobmaxsize, v_dest_offset, v_src_offset, DBMS_LOB.default_csid, v_lang_context, v_warning); The error I believe is relating to this section of the code: DBMS_LOB.lobmaxsize .
My questions are:
What is the max size of DBMS_LOB?
And has anyone had any success inserting/parsing a field that contains 10000+ characters with Access embedded special characters?

Hello,
" Only problem that I have with OMWB is that it converts on memo field into a clob but the other into a varchar2(255) and truncates the data"Are you talking from experience? The varchar2 limitation doesn't make sense to me. I didn't use the tool my self, but I remember reading that the Oracle model can be changed. Maybe you should check the documentation more carefully. You can also try to open a new thread, with a specific subject on Access migration. That can draw the attention of the experienced posters.
" Hopefully the APEX team can come up with something about converting/recognizing Access special characters in the next version."From what I'm reading about ApEx 3.0 the last few days, it seems it will include a dedicated tool for Access migration.
Regards,
Arie.

What is the max amount of RAM that I can install using Snow Leopard?

What is the max amount of RAM I can install in my MacBook Pro? Does having Snow Leopard raise the RAM limit?

Michael Velasquez II wrote:
Despite only being able to read 3GB, what is the better way to go?
qty(1) 2GB and qty(1) 1GB Stick
or
(2) 2GB sticks?
In general, for best performance, it's best to match up the same size modules in each slot (2x2 in this case). However, given that it's only going to read 3GB, I'm not sure if that holds true here.

What is the max Captivate 5 project size?

Similar Messages

Maybe you are looking for