What is the max distance recommended between xServe RAID and the host?

I'm looking to relocate my rack to quieter spot, but I would like to keep my xServe RAID in the rack. How far away can I keep my xServe RAID from it's host system? I have it hooked up to my MacPro right now.
Thanks

Hi
I would say about as far as the FC Cables and your budget will go. According to Apple's Tech Brief on the subject that will be around 500 metres provided you use the relevant transceivers:
http://images.apple.com/xserve/pdf/L322097A_FibrChnl_TB.pdf
Page 4.
HTH?
Tony

Similar Messages

What is the recommended Delay/Latency between Call manager and The SRST setup

Hi ,
Need to understand the readability between the CUCM and SRST.
What is the recommended Delay/Latency, Bandwidh between Call manager and The SRST gateway setup.
Regards,
Velu S

Hi Manish,
I've been struggling to get this information and what I could understand from the SRND is that this 80ms is just related to the Intra-Cluster communications (Between Servers UCS), there is no relation with SRST Gateways:
"The maximum one-way delay between any two Unified CM servers should not exceed 40 ms, or 80 ms round-trip time."
From that I assume that the RTD between the SRST and the Cluster should be based on the affirmation below:
"If a voice service is hosted across a WAN where the one-way latency is 200 ms, for example, users might experience issues such as delay-to-dialtone or increased media cut-through delays. For other services such as presence, there might be no problem with a 200 ms latency."

What's the difference between Java SDK and the Enterprise Edition?

What's the difference between Java SDK and the Enterprise Edition? Are they both free?

both r free but they are used in diffrent applications. sdk are used for simple apps that run on your computer while j2e (enterprise edition) are ment for large distributed computer systems that include servers and such. if you don't know the diffrence you probably wont need the the j2e, only the sdk.

What is the max size of a zip file with the JDK1.5 ?

Hello everybody,
I'm a french student and for a project, I need to create a zip file, but I don't know in advance the number and the size of files to include in my zip.
I wish to know if someone have the answer to my question : what is the max size of a zip file with the JDK1.5 ? I believe that with the JDK1.3, the limit size of a zip was about 2Go, wasn't ?
Thank you for all answer !
Good day !
PS : sorry for my very poor english ;-)

Here is all I have found for the moment :
...Okay, what about my suggestion of creating your own 10GB file?
Try this:import java.io.File;
import java.io.RandomAccessFile;
import java.nio.ByteBuffer;
import java.nio.channels.FileChannel;
import java.util.Random;
class Main {
    public static void main(String[] args) {
        long start = System.currentTimeMillis();
        int mbs = 1024;
        writeFile("E:/Temp/data/1GB.dat", mbs);
        long end = System.currentTimeMillis();
        System.out.println("Done writing "+mbs+" MB's to disk in "+
                ((end-start)/1000)+" seconds.");
    private static void writeFile(String fileName, int numMegaBytes) {
        try {
            int numBytes = numMegaBytes*1024*1024;
            File file = new File(fileName);
            FileChannel rwChannel =
                    new RandomAccessFile(file, "rw").getChannel();
            ByteBuffer buffer = rwChannel.map(
                    FileChannel.MapMode.READ_WRITE, 0, numBytes);
            Random rand = new Random();
            for(int i = 1; i <= numMegaBytes; i++) {
                for(int j = 1; j <= 1024; j++) {
                    byte[] bytes = new byte[1024];
                    rand.nextBytes(bytes);
                    buffer.put(bytes);
            rwChannel.close();
        } catch(Exception e) {
            e.printStackTrace();
}On my machine it took me 43 seconds to create a 1GB file, so it shouldn't take too long to create your own 10GB. Then try zipping that file.
Good luck.

What is the difference, if any, between Photoshop CS6 and CC?

What is the difference, if any, between Photoshop CS6 and Photoshop CC?

Thank you, Garima. This helps!
Larry
Date: Thu, 13 Feb 2014 14:14:08 -0800
From: [email protected]
To: [email protected]
Subject: What is the difference, if any, between Photoshop CS6 and CC?
    Re: What is the difference, if any, between Photoshop CS6 and CC?
    created by Garima.J in Photoshop for Beginners - View the full discussion
Hi LarryMeikle
The biggest difference between Photoshop CS6 and Photoshop CC is that Photoshop CC is subscription-based--you have to subscribe to Adobe's Creative Cloud service to use it. Also, Photoshop CC includes new features that were not in Photoshop CS6.
Let us know if that helps.
Thanks!
Garima
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6118812#6118812
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6118812#6118812
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6118812#6118812. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop for Beginners at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

What is the associatione between Star Wars and the WCUI Skin "New Hope

Hi Guys,
I am doing SAP CRM 7.0 through University SAP Alliance programme. Could you please anyone tell what is the answer for the following question
What is the associatione between Star Wars and the WCUI Skin u201CNew Hopeu201D
Thanks in advance
Regards
Saravanan.R

Ok, I'll take a stab at it. Since you normally work with a single layer it probably is not as important. But it still can be important inder the right circumstances.
Lets say you have a photo of a blue background with a green square and a blue circle. You want to move the two objects.
Use the selection tools to select one of the objects, hit ctrl-j to make a copy of that section onto a new layer, then repeat for the second object.
Now that each object is on it own layer, you are free to fill that original image with the background color
Because the two objects are on their own layer and everything around that object is transparent, you can freely move the object around until it suites you.
When you are done, if you wish you can flatten the layers again.
Now this could have been done using the new layers button, but it creates an emty layer, so you have the extra step of copy and pasting the section to that new layer.
Now image you work for a large company and you are doing a composite for a huge magizine that has over a hundred objects that your boss "says" are in the wrong location, and wants them moved asap as the magazine is printing by nightfall.
By eliminating the extra copy/paste step with multiple layers the time saved can be huge.
If you are creating new objects then duplication doesn't really make sense then so, each does have its place.
Hopefully that sheds a bit of light and doesn't confuse things more. LOL.

3. What is the difference, if any, between a Workset and a Role?

3. What is the difference, if any, between a Workset and a Role?

Hai
Pls check these links
http://help.sap.com/saphelp_nw04s/helpdata/en/4f/bceaffeb8c114ebef8255b63079c7c/frameset.htm
http://www2.sapdesignguild.org/resources/ma_guidelines_3/introduction/what.html
Reward points if helpful
Regards
Nissy

What is the difference between partition-count and the number of caches?

What is the difference between partition-count and the number of caches in Coherence? Are they same?

Those are totally orthogonal concepts.
For more, look at this thread where I answered your other related questions and explain this, too:
Where can I find the accurate definitions of these terms?
Best regards,
Robert

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

There is an inconsistency between the authentication mode of target web application and the source web application after migrating to claims

I've had my farm upgraded from SP2010 to SP2013 for over 6 months now and all is well, however, I was refreshing my staging environment from production and I noticed that one of the databases still shows these errors when I run test-spcontentdatabase:
Category : Configuration
Error : False
UpgradeBlocking : False
Message : The [SharePoint Web App] web application is configured with claims authentication mode however the content database you are trying to attach is intended to be used against
a windows classic authentication mode.
Remedy : There is an inconsistency between the authentication mode of target web application and the source web application. Ensure that the authentication mode setting in upgraded web application is the
same as what you had in previous SharePoint 2010 web application. Refer to the link "http://go.microsoft.com/fwlink/?LinkId=236865" for more information.
This doesn't make sense considering I converted the production web application to claims during the upgrade and then verified all sites were working with claims logins. I also verified that existing AD user identities were converted to claims by checking out
the database tables. Yet test-spcontentdatabase still thinks there is a mismatch here.
My farm is SP1 and no further CUs. The point of this particular refresh is so I can update to the November CUs in my test farm. Anyone else see this? Seems like it's a bug/safe to ignore because my stuff is working.
Thanks,
Aaron

See:
http://thesharepointfarm.com/2014/11/test-spcontentdatabase-classic-to-claims-conversion/
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Stop the Sales Orders flow between R/3 and CRM systems.

Hello Experts,
I am facing one middleware related issue.
I am creating a quotation and Order in Crm system an those are replicated to R/3.
But I am creating some orders in r/3 and those are alos replicating to CRM, I want to stop the flow of Orders between R/3 and CRM.
Please let me know where I have to do the changes.
Thanks

Hi,
What Debolina suggests would stop flow of Orders from CRM to R3.
But what i learn from your post is :
you wanna stop Orders flowing from R3 to CRM.
If m coorect in above, then teh solution for you is different:
You have to filter out the orders.
Goto: R3AC1
Select object : SALESDOCUMENT
Goto Filters tab and set the filter as desired.
This would stop the flow of Orders from R3 to CRM
Kindly reward with points in case helpful
Sharif.

HT3275 My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. What happened?

My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?

abailey46 wrote:
My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?
Sorry we are unclear as to the external hard drive and its connection to the TC..
For instance the light that blinks.. is that the TC or external hard disk or what.
Did you try just rebooting / restart the whole network in correct order.. modem.. router / TC.. external drive.. clients with 2min gap between each.
Are you actually running Snow Leopard as the profile states?
How old is the TC?

Data reconciliation between R/3 and the BW Systems

How do we do data reconciliation between R/3 and the BW system for the following areas?
Purchasing
Controlling:
Project System:
COPA
SD
AP
Trgards,
Tony G

Tony
Have you looked these documents??
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20validate%20infocube%20data%20by%20comparing%20it%20with%20psa%20data
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
Re: BW v. R/3 data reconciliation
Hope this helps
Thanks
Sat

"USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2

Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

Hello. I recently pieced together a late 2008 MacBook Pro 15". Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.

Hello. I recently pieced together a late 2008 MacBook Pro 15". Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.
I have reset the NVRAM and the SMC a couple of time but that didn't work so I ran an Apple Hardware Test and while testing the logic board it gives the following error:
4SNS/1/40000000 LB1T
I've done some research and found this is a temperature sensor related to the battery, but cannot find where the sensor is located in the computer. Would you know how I can find the sensor to test it? Could my battery problem be related to something else? Would a fresh install of Lion help?
Thank you!
Mike
Two pieces of information that may or may not b helpful, the hard drive is from my early 2008 MBP and the only test disc I have access to is from an iMac.

Why do you have LION installed on that older machine?
So you say you built a macbook from a bucket of parts eh? Kudos
heres a pic of the battery temp sensor

What is the max distance recommended between xServe RAID and the host?

Similar Messages

Maybe you are looking for