What is the max frame rate in depthFrame

In v1.8, I remembered the frame rate can be up to 30fps in depthFrme. what is the max frame rate in depthFrame in the v2.0? And how can i set it? thx!

Depth (and IR, body, face and HDface) frame rates are 30fps.
Color is 30fps unless low light mode is detected then it automatically switches to 15fps.
If you're using the multistream source it will stream at the lowest framerate from the chosen framesources.
When you're using separate sources they all stream at their own fps rate.
Frame rates can not be set by the user.
Brekel

Similar Messages

  • What is the best frame rate to shoot/edit with for export to DVD?

    Hello, I am going to shoot some instructional martial arts videos that need to be exported to DVD. I haven't exported to DVD since 2005. I am curious what the best frame rate is to shoot with and edit in Premiere to export to DVD. I've read conflicting information online. Some forums say that you can edit in whatever frame rate you want as long as the output is SD, 30i, which seems outdated to me.
    I'm shooting on the GH2, so my options are 1080 24p (which has terrible strobiness compared to other cameras at 24p), 1080 60i, 720 60p, and apparently there is an HBR firmware update that allows 1080 30p. I want the motion to be as unstroby as possible, without being too soft. My friend's camera can shoot 1080 60p and I'm considering buying the G6, which also shoots 1080 60p. But I've read online that 60p to DVD looks choppy.
    Any advice would be greatly appreciated. Thank you very much.
    Jeremy

    Thank you Jim. I do have one more question with regards to your advice:
    I am putting the new firmware on my GH2 today, so I will be able to capture 1080/30p as opposed to only 1080/60i to edit in the 30p timeline. Is there a reason you would prefer 60i over true 30p at the same res? I've had problems with interlacing in the past never quite going away and getting funky when doing slow motion and other effects.

  • What is the best frame rate to use for movies watched only on computer scre

    Hello all,
    I'm UK based, and so use the PAL system of 25 fps. This works well enough if I want to make a DVD, but I'm now starting to work on projects that will only ever be seen on You Tube or Mobile Me - that sort of environment.
    A portion of my work features stills, and I prefer to use Photo to Movie for pan, scan, and zoom and rotate - it's much more versatile than Ken Burns in iMovie.
    However, I can't seem to get perfectly smooth pans when viewing on a screen. Depending on whether I use 25 fps or 30 fps, the pan is slightly 'trembly'. I've tried all the codecs, different frame rates etc, but I can't seem to remove this problem. A pan created in iMovie is perfectly smooth. Does anyone know why I can't replicate this in Photo to Movie?
    I'm starting to suspect it isn't really a frame rate issue, but something else - but there my knowledge runs out.
    Can anyone offer advice on this?
    Thanks in advance.

    For Video projects, use the same frame rate as your source material. If your camcorder shoots PAL use PAL. For photos it should not matter.
    I get a whole lot more control over Ken Burns in iMovie. I always thought that iPhoto was just kind of random with no control.
    I guess I'll have to go back and look at it. In iMovie 09 and before, iMovie did not handle vertically oriented photos very well for Ken Burns. This is fixed in iMovie 11.
    Message was edited by: AppleMan1958

  • What is the suggested frame rate to record in for fast / slow motion processing from a clip recorded

    I want to create a video however I only have 1 dslr camera and I want the ability to post process the clips I record to be either in slow motion or fast motion. I don't want to have to record something in 24fps then 60fps. is there an ideal frame rate for both. What are some of the best practices for this in regards to recording and post processing in Premiere Pro.
    Example of fast and slow video. Thanks.
    http://vimeo.com/75259949

    The ideal is to shoot in different frame rates, one for real time footage and one for fast or slow motion clips.  This is called under and overcranking.  It means you have to decide when shooting whether the clip will be real time or not.
    Less than ideal is to shoot everything at one frame rate and then slow it down or speed it up later.  It's less than ideal because the effect is never as perfect as the ideal method.  Especially in PP, which does not do very well with slow motion to the point I recommend using After Effects instead.  (At least with 24 fps media.)
    On a side note, you can help solve the horrible slow-motion problem:
    http://forums.adobe.com/thread/1369265?tstart=60

  • How do I convert 1080 24p NTSC to PAL format, - whats the right frame rate ?

    I have some footage* that I want to convert to PAL HD.   Currently its in NTSC HD.
    What is the best frame rate / frame size  to convert into?  Do I have to convert it up to 50fps (or 25fps) and turn it into interlaced?
    General
    Complete name                            : my.mov
    Format                                   : MPEG-4
    Format profile                           : QuickTime
    Codec ID                                 : qt 
    File size                                : 168 GiB
    Duration                                 : 2h 18mn
    Overall bit rate mode                    : Variable
    Overall bit rate                         : 173 Mbps
    Encoded date                             : UTC 2014-09-08 17:29:17
    Tagged date                              : UTC 2014-09-08 20:14:37
    Writing library                          : aapl
    ©TIM                                     : 00:00:00:00
    ©TSC                                     : 2997
    ©TSZ                                     : 125
    Video
    ID                                       : 1
    Format                                   : ProRes
    Format version                           : Version 0
    Format profile                           : High
    Codec ID                                 : apch
    Duration                                 : 2h 18mn
    Bit rate mode                            : Variable
    Bit rate                                 : 173 Mbps
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate mode                          : Constant
    Frame rate                               : 23.976 fps
    Color space                              : YUV
    Chroma subsampling                       : 4:2:2
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 3.484
    Stream size                              : 168 GiB (100%)
    Writing library                          : Apple
    Language                                 : English
    Encoded date                             : UTC 2014-09-08 17:29:17
    Tagged date                              : UTC 2014-09-08 17:29:17
    Color primaries                          : BT.709
    Transfer characteristics                 : BT.709
    Matrix coefficients                      : BT.709
    Other
    ID                                       : 2
    Type                                     : Time code
    Format                                   : QuickTime TC
    Duration                                 : 2h 18mn
    Time code of first frame                 : 00:00:00:00
    Time code settings                       : Striped
    Language                                 : English
    Encoded date                             : UTC 2014-09-08 17:29:17
    Tagged date                              : UTC 2014-09-08 17:29:17

    PAL is 720 x 576 pixels interlaced (bottom first).
    If it's 16:9 aspect ratio, you need to select "Anamorphic" and the frame rate it 25 fps.
    If you need help with Compressor settings - I use Best for everything including re-sizing - processing is slow but the result is excellent.
    I believe you can use MPEG Streamclip for converting, but I have not tried it.
    Andy

  • How do I change the export frame rate?

    How do I change the export frame rate?

    my video came out super twitchy when i exported it and was told i need to change to export frame rate.
    here is an 8 sec  clip of what i am talking about. 
    http://www.youtube.com/watch?v=cuQ5VduBUK
    where is quick time conversion
    sorry im kind of a noob
    still trying to figure everything out

  • How to set the Codec, Frame rate, Bit rate, and Resolution for iMovie 10.0.5

    To upload a video to Vimeo, I need to be able to set the codec, frame rate, bit rate and resolution to make sure the file is compressed to under 500 MB. Where in iMovie 10.0.5 am I given the option to adjust these settings?
    Thank you!

    Another question is in continuous mode, NI DAQmx uses Samples per channel to determine the buffer size. But according to the website you specified, it says if the acquisition is continuous (sample mode on the DAQmx Timing.vi is set to Continuous Samples), NI-DAQmx will allocate a buffer according to the following table. And for sample rate between 100 - 10,000 S/s, the buffer size is 10 kS. So if I set the sample rate to be 5000 S/s, and set the Samples per channel to be 20000, then what exactly the buffer size is? 20 kS or 10 kS?
    Thanks.

  • Is the best frame rate 31fps?

    In years past, 31fps was considered the best frame rate, as far as getting the best performance on both Mac and Windows.  Has that changed with hardware acceleration?  Does the frame rate still mater in getting consistent performance?

    I'd say anything beyond 36 - max 40 fps is too much and unneeded. Plus, a higher framerate would be too demanding on CPU resources as flash player needs to redraw the screen as much times as the framerate count. This is the main reason for flash player causing a slow down in system response. Take for instance moviemaking - it has a framerate of 25 fps and this is enough for even the most dynamic scenes. A framerate between 24 and 30 for flash is considered to be smooth enough and at the same time not too much demanding on system resources
    Emil Georgiev - Flash & Web Design

  • What is the max sample clock using the Shielded Single-Ended Flying-Lead Cable

    Hi
    What are the max practical limits for the sample clock using the Shielded Single-Ended Flying-Lead Cable?
    I am playing with the Labview embedded example "Dynamic Generation and Acquisition Source Synchronou.vi" using the Shielded Single-Ended Flying-Lead Cable and the PXIe-6556.
    This example write in the channels 0-7 and read in the channels 7-15.
    It also export the sample clock and data active event so we have a "Source Synchronous"
    I change the original example to set the input impedance to 50ohm and VH and VL voltatages.Write 3.3V - 0V and read 0.5V 0.3V.
    The problem is the signal integrity at higher frequencies. Please see the picture attached.
    Sample clock 30MHz
    50MHz
    70MHz
    90MHz
    Error: PLL could not phase-lock to the external reference clock.

    Hello engfpe,
    According Hardware manual the Maximum Sample Clock rate is 200 MHz.
    http://www.ni.com/datasheet/pdf/en/ds-421
    Is not clear for me if your error message was received on LabVIEW or on your Agilent Scope, and I don´t know your Agilent Scopes specifications. Neither I don´t know what exactly you are trying to generate, maybe if yo ucan clarify more your application and your issue I can help you more.
    Best regards,

  • HP Pavilion DV2700 Special Edition what is the max ram for this model laptop?

    HP Pavilion DV2700 VERVE Special Edition
    Operating System  Windows Vista 64 bit Service Pack 2
    Year made 2007 
    Processor AMD Turion 64 X2 TL- 60 2.0 GHz
    Current Ram 4GB
    would like to know what is the max ram 
    PS 
    Can i install and other Processor or is this and intergrated one with the motherboard.? 
    In Advance thank you for your time to look at my question
    Indarktimes
    This question was solved.
    View Solution.

    Hi
    Please find the link given below for your model off unit Max Memory supported is 4GB.
    http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06a/12139188-78299199-78299212-78299212-78299212-81135202....
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • What is the max. count of internal worker-threads in B1iSN 88?

    Hi Experts,
    We have an installation of B1iSN 88 with an ECC 6.0 and 54 SAP Business One installation. The Hardware is 8 Core multi-threads processor. 32GB Memory. Now we have a problem with the queuing of Events. What we have found is that the configuration of the internal worker-threads is set to -1(please see below for the settings). We change the settings to xcl.threads=20 and it improves the queuing. My question is what is the max. count of internal worker-threads per core? so that we can know how many worker will set and if we need to upgrade the CPU to 16 Core..
    # The max. count of internal worker-threads afforded for the internal Scheduler (defaults to 1)
    # The value of 0 means that there is no limit (what in general should not be set up).
    # A negative value means the count of threads per available processor
    xcl.threads=-1
    Regards,
    Wilson

    You're very welcome.
    Yes, they are very nice machines. 
    What a jump in performance when I swapped out the Pentium 4 620 mine had, for the PD 945, and tossed in 4 GB of memory.
    That box will also run the Radeon HD 6570 with no problem too, which is what I put in mine.
    The downside of that model is that there are no settings for ahci or raid.
    I own or have owned every CMT since the d510 with the exception of the dc7900.
    My main PC is now the 8200 Elite CMT which I installed W8.1 on.
    It has an i7-2600 processor and 32 GB of memory, 1 TB SATA III hard drive.
    I threw in a Radeon HD 6670 in that one.
    Best Regards,
    Paul

  • What is the max size of HDD I can use in my dc7600 CMT

    I am using an HP dc7600 CMT which is working fine after upgrading to a Samsung 128GB SSD, Intel Pentium D 3.4 GHz, 4GB RAM, and an AMD Radeon HD 6450. I am running Win 8.1 Pro x64, with the most recent upgrade, and have absolutely no problems. I now want to add a second internal HDD, and wonder what is the max size  I can go to. Can I go to 2TB, or am I limited to a lower figure? 1TB? 500GB? 250GB?
    Will be glad for some help here, especially if it has been actually tried in practice.
    Thanks in advance.
    Best regards
    This question was solved.
    View Solution.

    You're very welcome.
    Yes, they are very nice machines. 
    What a jump in performance when I swapped out the Pentium 4 620 mine had, for the PD 945, and tossed in 4 GB of memory.
    That box will also run the Radeon HD 6570 with no problem too, which is what I put in mine.
    The downside of that model is that there are no settings for ahci or raid.
    I own or have owned every CMT since the d510 with the exception of the dc7900.
    My main PC is now the 8200 Elite CMT which I installed W8.1 on.
    It has an i7-2600 processor and 32 GB of memory, 1 TB SATA III hard drive.
    I threw in a Radeon HD 6670 in that one.
    Best Regards,
    Paul

  • We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

    we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
    Appreciate your support and if possible , how to do this?

    If you want to work with Mac OS X, you need one computer per simultaneous user.
    What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
    Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

  • I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?

    I have MacBook Pro 2.2GHz Intel Core i7 (15-inch DDR3) Early-2011 and I want to upgrade RAM, What is the MAX RAM can I get it 8GB or 16GB?

    Maximum Memory     16 GB (Actual) 8 GB (Apple)
    Memory Slots     2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

  • I am looking to get a new 13 inch mac book pro, what is the max RAM that I can install.  I know configured from Apple is 8 GB, but can I put 16 GB after?

    i am looking to get a new 13 inch mac book pro, what is the max RAM that I can install.  I know configured from Apple is 8 GB, but can I put 16 GB after?

    Yes, you can install 16GB in your new macbook pro.
    Go here (OWC) and here (Crucial) to give you options on how much you want to spend.
    Good luck.

Maybe you are looking for

  • How can we tell if SQL*Loader is working on a TABLE?

    We have a process that requires comparing batches with LDAP information. Instead of using an LDAP lookup tool, we get a nightly directory file, and import the two COLUMNs we want via SQL*Loader (REPLACE) into an IOT. Out of three cases, two just chec

  • Table component disturbing the order of rows while displaying

    HI, In jspx when ever data is displayed in table,when we select last page the table component is displaying data which is not sorted.(values given to table are changed in output). This is occuring only in last page. EX:If i have 87 records with pagin

  • Data Execution Prevention stops quicktime playing.

    I can't get quicktime to play at all, every time I try Data Execution Prevention stops it. I have tried to turn off DEP for quicktime but it won't let me. I have uninstalled and reinstalled both quicktime and i tunes, also removed any Codec Packs I h

  • How to hide a block in Selection screen ?

    Hello abap gurus, I have a requirement where I have to hide a block on Selection screen. Can anyone of u give the command for that or code.. Its urgent ! Om Sai Ram, aRgD

  • Add attachments

    I have created a form that allows users to add an attachment. I can add the attachment, but then where does it go? When the form is submitted, the attachment doesn't come with it.