What is the max. resulotion for the video after ppt-import?
Hello everyone,
I am trying to create an audio podcast with Captivate, by importing ppt-slides and then recording audio speech over each slide. So far so good.
I get the impression that the quality of the resulting video never reaches proper 720p HD quality - e.g. fonts are blurry.
Is there a limitation of what I can get out of the ppt-file? Is there a tutorial or similar I can use to get the best quality out of my imported ppt?
Thanks & best regards
QnA_Dude
LOL, you are talking about blurry fonts with an *AUDIO* podcast? How will they be seen?
That question notwithstanding, one way to achieve crystal clear PPT is to use Captivtate to record the slide deck playing just as you would record any other application. If you go the import route, you will likely see some artifacting as the scale changes.
Then again, with *ANY* method in Captivate, you will see artifacting when you change the scale of what is being viewed. The degree to which it suffers depends on how much scaling is occurring. Captivate works with raster images.
Cheers... Rick
Similar Messages
-
What's the max capacity for the library?
Who has the largest Aperture library (photo count)? iPhoto brags 250,000 capactiy - how about Aperture?
hello, jeff
quote: "Apple's Aperture constrains its internal library to a single volume"
Nope, the Complete Digital Photography site is not correct. Aperture can access multiple Libraries in a single Volume (not simultaneously but you can have several Libraries in a single Volume).
quote: "...with a little under-the-hood tinkering you can span your library across multiple drives, providing you with far more storage for your Aperture images. The Aperture Library Spanner is a simple app that automatically configures your Aperture library to span multiple volumes."
Interesting application. From the link and comments using the Spanner application it appears the Aperture Vault does not update across the hard drives — a huge make or break flaw.
Thanks for the link
victor -
SELECT
ADHOC.ATS_ESH.Entry_Num
,ADHOC.ATS_ESH.Importer
,ADHOC.ATS_ESH.Version AS [ATS_ESH Version]
,ADHOC.ATS_ESL.Version AS [ATS_ESL Version]
FROM
ADHOC.ATS_ESH
INNER JOIN ADHOC.ATS_ESL
ON ADHOC.ATS_ESH.Customs_Entry_Num = ADHOC.ATS_ESL.Customs_Entry_Num
I just need to see the MAXIMUM version number in the ESL table for each Entry_Num in the ESH table. ESH is the one side, ESL is the MANY side.Do you understand what this query is doing? Did you check the blogs I pointed you to?
The query I provided gets the latest ESL version for each custom number. So, if max ESL version is higher than ESH version, it's just a coincidence. If you only want to see rows where versions do not match, just add an extra where condition, e.g.
SELECT * FROM cte WHERE Rn = 1
AND [ATS_ESH
Version] <> [ATS_ESL
Version]
BTW, what is the type of these version
columns and what kind of data in them? If they are character columns, sorting them in DESC order will not necessary return the latest version. Can you show some samples of the data in these two columns?
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles -
Select Max record for the report
Post Author: ROMZILBER
CA Forum: WebIntelligence Reporting
Hello,
Here is our problem we have history data on a table like
Example
Data:
11111 bbb 12/31/2004
11111 nnn 12/31/2005
11111 ddd 12/31/2007
On a report we only need to display the most current record (based on a date).
11111 ddd 12/31/2007
How can we do that, we have try to create subquery but it does not allowed to enter logic for the max date for the same id. So we are kind of stuck, I am more then sure this would be a very common conditions specially for data warehousing.
we are on Oracle 10g
Thank you for all your help.Post Author: ROMZILBER
CA Forum: WebIntelligence Reporting
To create a view is not a problem, supporting it is a different story
But we have find a solution, you were correct about the filter. I just did not know you can put the whole subselect in a filter
but here is a logic for the filter if someone would come up with the same problem
tablename.NNNN_PROOF_DT = (SELECT MAX(X.NNNN_PROOF_DT) FROM tablename X WHERE tablename.NNNN_CLAIM_NUMBER = X.NNNN_CLAIM_NUMBER AND tablename.NNNN_LINE_CD = X.NNNN_LINE_CD)
please let me know if you have any questions.
sorry I am new to this so please do not take any offense -
Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
What's the Best App For Watching Videos on iPad Air?
Okay, so there's no Flash past, present or future for the iPad. I read some discussions here in the archives from a year and two ago about which workaround works around best (or least badly). Is there any update now as of December 2013 for what's the best app for viewing videos online on the iPad (Air)? Thanks.
I downloaded the new (2013) version of Photon and it's been playing, appropriately enough, episodes of Star Trek: TAS that otherwise require Flash. The one thing I have to remember is to click the goofy lighting bolt icon toward the top right-hand corner of the Photon screen when I return to warch an episode if I stopped in the middle. Basically it will turn off the "Flash" emulation when the screen goes dark with inactivity, and then when you reopen Photon it crashes and you have to re-reopen Photon, click on the link to return to the website, and then click the lightning bolt icon. I don't know why the producers made it that way, as it's pretty inconvenient, but maybe they wanted to make a browser more than a Flash emulator. I haven't tried other Flash videos yet, but so far, so good. :-)
-
What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanksfunction(){return A.apply(null,[this].concat($A(arguments)))}
bmiller0525 wrote:
What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks
thats way too vague of a question... best what? quality? size? playback?
best quality then use high bitrate, small size use low bitrate. -
What is the best Computer for HD video editing where can I get it under $3000- $5000.00?
The wording of your question suggests you may be new to video editing, in which case the types of projects you will be doing may not be the most complex.
Please accept my apology if that assumption is incorrect.
The cheapest computer available will edit 1080p video perfectly well but if you must have the "best" you will be looking at nothing less than a MacPro.
Too many people get hung up about the equipment they use and blame it for any inadequacies . . . when the most important component is the operator. -
What is the max ram for a iMac DV 400mhz? (family M5521)
I've read several posts on this forum about the max memory for this iMac. Several people say it's 512 then usually someone comes back and says "Actually it's 1024". As per the Apple specs page (posted below) the Min is 64MB and the Max is 512MB. Is that overall system, or per slot? I'm guessing it's per slot, since it has two slots and the Ram Sizes states it can handle a 512 chip (2 slots @ 512 ea. = 1024) am I wrong in this?
Thanks,
-Matt
RAM Slots: 2, PC100 DIMM
Min - Max RAM: 64 MB - 512 MB
Min RAM Speed:
RAM Sizes: 64, 128, 256, 512 MB
iMac DV 400Mhz 512Mb Mac OS X (10.3.9)First ensure that you have the correct firmware installed. See Announcement: iMac (Slot Loading): Install iMac Firmware 4.1.9 Before Mac OS X 10.2 or later.
You will need OS 9 installed on the hard drive to install that firmware update. If OS 9 is currently on the hard drive you can install the firmware update (if needed) before swapping the hard drive.
Yes you can install OS 10.3 directly without installing OS 9. If there is any possibility that you will want to boot from OS 9 in the future, ensure that you pick the option to install the OS 9 disk drivers. -
What's the recommended format for shooting video thats going on websites
I'm basically looking to do video for websites. Since computer screens are displaying progressively. Is shooting (Progressive Frame Rates) always the better option for shooting video. This is if your only final destination is going to be the internet ?
Also, is streaming always the better route ? If you can afford a personal server, isnt streaming the best method of posting multiple video clips ?
Thanks - Appreciate all repliesJust one more note to add to the good ones already here: Make sure your source material is as good as it can possibly be. Maybe I'm the weirdo, but in my experience scaling down and compressing video for Web delivery exaggerates rather than hiding shortcomings in the source material. Most of my content is delivered over the Web, but I shoot everything in high-definition with aggressively contrasty lighting and deeply crushed blacks. You might think it wouldn't matter, since it's all getting downscaled and compressed for distribution anyway, but at least to my eyes, material that's shot in high resolution (and yes, at 23.976) with a lot of in-camera contrast compresses better. You end up with fewer subtle areas of mostly-the-same luminance, like in the backgrounds, and that's where Internet compression really falls apart. By keeping everything in sharp contrast, and especially by underlighting your backgrounds and really crushing your blacks, I feel you give the encoder a little advantage and let it produce a better result.
But that might just be me. -
What is the max wattage of the X1 DVR?
What is the max wattage of the X1 DVR? I'm trying to determine UPS size for my TV & X1 box.
JerWin wrote:
Great! Thanks. -
The max value for a key in an ODS
hi,
i want to link 2 ODS (Historic PRICE and PRICE)
the key fields in Historic price ODS are : "material", "vendor" , and a field name "AVN"
I want to create a start routine in order to find the data with the maximum value for the field "AVN" among data with the same key "material, vendor"
Once this value found, i want to send it in the ODS : "PRIX"
But how can i do it ?
should i sort the ODS table ? what is the Abap fonction ?
Than you very much for your help.
JacquesHi,
seems that you need an extraction via self defined function-module.
Within the FM, you can determine the max value like this:
DATA: itab_ods_hist type standard table of /BIC/A<ODS HISTORIC PRICE>00 with header line.
SELECT * FROM /BIC/A<ODS HISTORIC PRICE>00 INTO CORRESPONDING FIELDS OF TABLE itab_ods_hist
SORT itab_ods_hist descending by material vendor AVN.
DELETE ADJACENT DUPLICATES FORM itab_ods_hist COMPARING material vendor.
This will give you only the max values within the itab.
now hand this over.
Example for a function module for extraction can be found in the R/3 source system.
hth
cheers
sven -
Whats the newest drivers for the nforce? v 1.05?
hello,
whats the newest version for the nforce? i have v 1.05 installed right now. but i think there's a new one one msi's website, what version is that? and does it have an nforce vga driver? i thought the drivers are unified? so why does it have a sperate driver for the video?
thanksthanks guys...
but markoul, how do you check the version anyway? when i right click on my computer and select properties, i could go to the device manager, right? and there i could check for the versions of each drivers installed, but i cant see video drivers with 29.42 version, what i can i see is like this, 2.8.3.2. how would i know if its the 29.42 version?
and one more thing, so the unified version i'm using is from nvidia? but i think i downloaded this from msi? did they also have versin 1.05? i'm not sure....but whats the newest version? the one on msi's website? what should i get the system drivers? how about the separate vga drivers?
thanks -
What is the default bufferTime for the OSMF player?
Hi,
I want to know what is the default buffer time for the OSMF player. And can we set it using NetMocker package using netStream.bufferTime? And when we set it once does it remain that afterwards?
Regards,
AmitNetMocker is used for unit testing OSMF features that depend on NetStream, it's not something that would be of much use in a production application.
OSMFPlayer (and OSMF) uses the default values for the buffer for progressive and RTMP streaming video. For HTTP streaming video, OSMFPlayer (but not OSMF) uses an adapative algorithm to set the buffer (see HTTPStreamingNetLoaderWithBufferControl). You can set the buffer time via MediaPlayer.bufferTime, and it should retain its value. -
This question was posted back in 2013, and I'll having it today. Anyone know what the deal is with the system selecting a theater image with NO way to change it--better yet--has anyone figured out a way to change it? Not a clue, do you know wherethe theater files are located on a MAC?
I can't answer your first question.
The default location for the imovie Theater.theater package is in your user / Movies folder.
Maybe you are looking for
-
Report parameter does not show up in rtf template
Hi all I was able to produce an rtf file based on the XML bellow. I could create the header with the customer name and the invoice list with the totals. However, I already tried by any means to insert the AS_OF_DATE parameter in the rtf template but
-
Problem during deploying bw iview from visual composer module on Portal.
Hi all, we are working on Portal 6.0 sp 11 and using VC 6.0 sp 4 for developinrg R3 and Bw iviews on Visual composer. There is no problem in deploying the r3 iviews on the portal but in case of BW (3.0 and 3.5 ) iviews while deploying it to p
-
SQL Query not working in action performed event of combobox in swing
hi all.. i have to retreive from the database based on the item selected in the comboBox....... when the program runs for the first time the data of defaultselected item is being displayed... but when another item is selected the data is not retrieve
-
I am a new IMac user. I am learning the IMovie program and when I burned my 1st Practice DVD and the menu showed up at the end of the DVD. How do I get the Menu to start up first to where you have to manually start the DVD?
-
How to install flash player on my system without having admin access
Hi Team - I am working on my company system. I tried viewing youtube, its asking me to update the flash player and when i tried installing it shows you didnt have admin access. Since i using my company system, i dont know the password for admin. Henc